Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 | /* * drivers/net/phy/qsemi.c * * Driver for Quality Semiconductor PHYs * * Author: Andy Fleming * * Copyright (c) 2004 Freescale Semiconductor, Inc. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. * */ #include <linux/kernel.h> #include <linux/string.h> #include <linux/errno.h> #include <linux/unistd.h> #include <linux/interrupt.h> #include <linux/init.h> #include <linux/delay.h> #include <linux/netdevice.h> #include <linux/etherdevice.h> #include <linux/skbuff.h> #include <linux/spinlock.h> #include <linux/mm.h> #include <linux/module.h> #include <linux/mii.h> #include <linux/ethtool.h> #include <linux/phy.h> #include <asm/io.h> #include <asm/irq.h> #include <asm/uaccess.h> /* ------------------------------------------------------------------------- */ /* The Quality Semiconductor QS6612 is used on the RPX CLLF */ /* register definitions */ #define MII_QS6612_MCR 17 /* Mode Control Register */ #define MII_QS6612_FTR 27 /* Factory Test Register */ #define MII_QS6612_MCO 28 /* Misc. Control Register */ #define MII_QS6612_ISR 29 /* Interrupt Source Register */ #define MII_QS6612_IMR 30 /* Interrupt Mask Register */ #define MII_QS6612_IMR_INIT 0x003a #define MII_QS6612_PCR 31 /* 100BaseTx PHY Control Reg. */ #define QS6612_PCR_AN_COMPLETE 0x1000 #define QS6612_PCR_RLBEN 0x0200 #define QS6612_PCR_DCREN 0x0100 #define QS6612_PCR_4B5BEN 0x0040 #define QS6612_PCR_TX_ISOLATE 0x0020 #define QS6612_PCR_MLT3_DIS 0x0002 #define QS6612_PCR_SCRM_DESCRM 0x0001 MODULE_DESCRIPTION("Quality Semiconductor PHY driver"); MODULE_AUTHOR("Andy Fleming"); MODULE_LICENSE("GPL"); /* Returns 0, unless there's a write error */ static int qs6612_config_init(struct phy_device *phydev) { /* The PHY powers up isolated on the RPX, * so send a command to allow operation. * XXX - My docs indicate this should be 0x0940 * ...or something. The current value sets three * reserved bits, bit 11, which specifies it should be * set to one, bit 10, which specifies it should be set * to 0, and bit 7, which doesn't specify. However, my * docs are preliminary, and I will leave it like this * until someone more knowledgable corrects me or it. * -- Andy Fleming */ return phy_write(phydev, MII_QS6612_PCR, 0x0dc0); } static int qs6612_ack_interrupt(struct phy_device *phydev) { int err; err = phy_read(phydev, MII_QS6612_ISR); if (err < 0) return err; err = phy_read(phydev, MII_BMSR); if (err < 0) return err; err = phy_read(phydev, MII_EXPANSION); if (err < 0) return err; return 0; } static int qs6612_config_intr(struct phy_device *phydev) { int err; if (phydev->interrupts == PHY_INTERRUPT_ENABLED) err = phy_write(phydev, MII_QS6612_IMR, MII_QS6612_IMR_INIT); else err = phy_write(phydev, MII_QS6612_IMR, 0); return err; } static struct phy_driver qs6612_driver = { .phy_id = 0x00181440, .name = "QS6612", .phy_id_mask = 0xfffffff0, .features = PHY_BASIC_FEATURES, .flags = PHY_HAS_INTERRUPT, .config_init = qs6612_config_init, .config_aneg = genphy_config_aneg, .read_status = genphy_read_status, .ack_interrupt = qs6612_ack_interrupt, .config_intr = qs6612_config_intr, .driver = { .owner = THIS_MODULE,}, }; static int __init qs6612_init(void) { return phy_driver_register(&qs6612_driver); } static void __exit qs6612_exit(void) { phy_driver_unregister(&qs6612_driver); } module_init(qs6612_init); module_exit(qs6612_exit); static struct mdio_device_id __maybe_unused qs6612_tbl[] = { { 0x00181440, 0xfffffff0 }, { } }; MODULE_DEVICE_TABLE(mdio, qs6612_tbl); |