/**
 * dwc3-omap.c - OMAP Specific Glue layer
 *
 * Copyright (C) 2010-2011 Texas Instruments Incorporated - http://www.ti.com
 *
 * Authors: Felipe Balbi <balbi@ti.com>,
 *	    Sebastian Andrzej Siewior <bigeasy@linutronix.de>
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2  of
 * the License as published by the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 */

#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <linux/platform_data/dwc3-omap.h>
#include <linux/pm_runtime.h>
#include <linux/dma-mapping.h>
#include <linux/ioport.h>
#include <linux/io.h>
#include <linux/of.h>
#include <linux/of_platform.h>
#include <linux/extcon.h>
#include <linux/regulator/consumer.h>

#include <linux/usb/otg.h>

/*
 * All these registers belong to OMAP's Wrapper around the
 * DesignWare USB3 Core.
 */

#define USBOTGSS_REVISION			0x0000
#define USBOTGSS_SYSCONFIG			0x0010
#define USBOTGSS_IRQ_EOI			0x0020
#define USBOTGSS_EOI_OFFSET			0x0008
#define USBOTGSS_IRQSTATUS_RAW_0		0x0024
#define USBOTGSS_IRQSTATUS_0			0x0028
#define USBOTGSS_IRQENABLE_SET_0		0x002c
#define USBOTGSS_IRQENABLE_CLR_0		0x0030
#define USBOTGSS_IRQ0_OFFSET			0x0004
#define USBOTGSS_IRQSTATUS_RAW_1		0x0030
#define USBOTGSS_IRQSTATUS_1			0x0034
#define USBOTGSS_IRQENABLE_SET_1		0x0038
#define USBOTGSS_IRQENABLE_CLR_1		0x003c
#define USBOTGSS_IRQSTATUS_RAW_2		0x0040
#define USBOTGSS_IRQSTATUS_2			0x0044
#define USBOTGSS_IRQENABLE_SET_2		0x0048
#define USBOTGSS_IRQENABLE_CLR_2		0x004c
#define USBOTGSS_IRQSTATUS_RAW_3		0x0050
#define USBOTGSS_IRQSTATUS_3			0x0054
#define USBOTGSS_IRQENABLE_SET_3		0x0058
#define USBOTGSS_IRQENABLE_CLR_3		0x005c
#define USBOTGSS_IRQSTATUS_EOI_MISC		0x0030
#define USBOTGSS_IRQSTATUS_RAW_MISC		0x0034
#define USBOTGSS_IRQSTATUS_MISC			0x0038
#define USBOTGSS_IRQENABLE_SET_MISC		0x003c
#define USBOTGSS_IRQENABLE_CLR_MISC		0x0040
#define USBOTGSS_IRQMISC_OFFSET			0x03fc
#define USBOTGSS_UTMI_OTG_CTRL			0x0080
#define USBOTGSS_UTMI_OTG_STATUS		0x0084
#define USBOTGSS_UTMI_OTG_OFFSET		0x0480
#define USBOTGSS_TXFIFO_DEPTH			0x0508
#define USBOTGSS_RXFIFO_DEPTH			0x050c
#define USBOTGSS_MMRAM_OFFSET			0x0100
#define USBOTGSS_FLADJ				0x0104
#define USBOTGSS_DEBUG_CFG			0x0108
#define USBOTGSS_DEBUG_DATA			0x010c
#define USBOTGSS_DEV_EBC_EN			0x0110
#define USBOTGSS_DEBUG_OFFSET			0x0600

/* REVISION REGISTER */
#define USBOTGSS_REVISION_XMAJOR(reg)		((reg >> 8) & 0x7)
#define USBOTGSS_REVISION_XMAJOR1		1
#define USBOTGSS_REVISION_XMAJOR2		2
/* SYSCONFIG REGISTER */
#define USBOTGSS_SYSCONFIG_DMADISABLE		(1 << 16)

/* IRQ_EOI REGISTER */
#define USBOTGSS_IRQ_EOI_LINE_NUMBER		(1 << 0)

/* IRQS0 BITS */
#define USBOTGSS_IRQO_COREIRQ_ST		(1 << 0)

/* IRQMISC BITS */
#define USBOTGSS_IRQMISC_DMADISABLECLR		(1 << 17)
#define USBOTGSS_IRQMISC_OEVT			(1 << 16)
#define USBOTGSS_IRQMISC_DRVVBUS_RISE		(1 << 13)
#define USBOTGSS_IRQMISC_CHRGVBUS_RISE		(1 << 12)
#define USBOTGSS_IRQMISC_DISCHRGVBUS_RISE	(1 << 11)
#define USBOTGSS_IRQMISC_IDPULLUP_RISE		(1 << 8)
#define USBOTGSS_IRQMISC_DRVVBUS_FALL		(1 << 5)
#define USBOTGSS_IRQMISC_CHRGVBUS_FALL		(1 << 4)
#define USBOTGSS_IRQMISC_DISCHRGVBUS_FALL		(1 << 3)
#define USBOTGSS_IRQMISC_IDPULLUP_FALL		(1 << 0)

/* UTMI_OTG_CTRL REGISTER */
#define USBOTGSS_UTMI_OTG_CTRL_DRVVBUS		(1 << 5)
#define USBOTGSS_UTMI_OTG_CTRL_CHRGVBUS		(1 << 4)
#define USBOTGSS_UTMI_OTG_CTRL_DISCHRGVBUS	(1 << 3)
#define USBOTGSS_UTMI_OTG_CTRL_IDPULLUP		(1 << 0)

/* UTMI_OTG_STATUS REGISTER */
#define USBOTGSS_UTMI_OTG_STATUS_SW_MODE	(1 << 31)
#define USBOTGSS_UTMI_OTG_STATUS_POWERPRESENT	(1 << 9)
#define USBOTGSS_UTMI_OTG_STATUS_TXBITSTUFFENABLE (1 << 8)
#define USBOTGSS_UTMI_OTG_STATUS_IDDIG		(1 << 4)
#define USBOTGSS_UTMI_OTG_STATUS_SESSEND	(1 << 3)
#define USBOTGSS_UTMI_OTG_STATUS_SESSVALID	(1 << 2)
#define USBOTGSS_UTMI_OTG_STATUS_VBUSVALID	(1 << 1)

struct dwc3_omap {
	struct device		*dev;

	int			irq;
	void __iomem		*base;

	u32			utmi_otg_status;
	u32			utmi_otg_offset;
	u32			irqmisc_offset;
	u32			irq_eoi_offset;
	u32			debug_offset;
	u32			irq0_offset;
	u32			revision;

	u32			dma_status:1;

	struct extcon_specific_cable_nb extcon_vbus_dev;
	struct extcon_specific_cable_nb extcon_id_dev;
	struct notifier_block	vbus_nb;
	struct notifier_block	id_nb;

	struct regulator	*vbus_reg;
};

enum omap_dwc3_vbus_id_status {
	OMAP_DWC3_ID_FLOAT,
	OMAP_DWC3_ID_GROUND,
	OMAP_DWC3_VBUS_OFF,
	OMAP_DWC3_VBUS_VALID,
};

static inline u32 dwc3_omap_readl(void __iomem *base, u32 offset)
{
	return readl(base + offset);
}

static inline void dwc3_omap_writel(void __iomem *base, u32 offset, u32 value)
{
	writel(value, base + offset);
}

static u32 dwc3_omap_read_utmi_status(struct dwc3_omap *omap)
{
	return dwc3_omap_readl(omap->base, USBOTGSS_UTMI_OTG_STATUS +
							omap->utmi_otg_offset);
}

static void dwc3_omap_write_utmi_status(struct dwc3_omap *omap, u32 value)
{
	dwc3_omap_writel(omap->base, USBOTGSS_UTMI_OTG_STATUS +
					omap->utmi_otg_offset, value);

}

static u32 dwc3_omap_read_irq0_status(struct dwc3_omap *omap)
{
	return dwc3_omap_readl(omap->base, USBOTGSS_IRQSTATUS_0 -
						omap->irq0_offset);
}

static void dwc3_omap_write_irq0_status(struct dwc3_omap *omap, u32 value)
{
	dwc3_omap_writel(omap->base, USBOTGSS_IRQSTATUS_0 -
						omap->irq0_offset, value);

}

static u32 dwc3_omap_read_irqmisc_status(struct dwc3_omap *omap)
{
	return dwc3_omap_readl(omap->base, USBOTGSS_IRQSTATUS_MISC +
						omap->irqmisc_offset);
}

static void dwc3_omap_write_irqmisc_status(struct dwc3_omap *omap, u32 value)
{
	dwc3_omap_writel(omap->base, USBOTGSS_IRQSTATUS_MISC +
					omap->irqmisc_offset, value);

}

static void dwc3_omap_write_irqmisc_set(struct dwc3_omap *omap, u32 value)
{
	dwc3_omap_writel(omap->base, USBOTGSS_IRQENABLE_SET_MISC +
						omap->irqmisc_offset, value);

}

static void dwc3_omap_write_irq0_set(struct dwc3_omap *omap, u32 value)
{
	dwc3_omap_writel(omap->base, USBOTGSS_IRQENABLE_SET_0 -
						omap->irq0_offset, value);
}

static void dwc3_omap_set_mailbox(struct dwc3_omap *omap,
	enum omap_dwc3_vbus_id_status status)
{
	int	ret;
	u32	val;

	switch (status) {
	case OMAP_DWC3_ID_GROUND:
		dev_dbg(omap->dev, "ID GND\n");

		if (omap->vbus_reg) {
			ret = regulator_enable(omap->vbus_reg);
			if (ret) {
				dev_dbg(omap->dev, "regulator enable failed\n");
				return;
			}
		}

		val = dwc3_omap_read_utmi_status(omap);
		val &= ~(USBOTGSS_UTMI_OTG_STATUS_IDDIG
				| USBOTGSS_UTMI_OTG_STATUS_VBUSVALID
				| USBOTGSS_UTMI_OTG_STATUS_SESSEND);
		val |= USBOTGSS_UTMI_OTG_STATUS_SESSVALID
				| USBOTGSS_UTMI_OTG_STATUS_POWERPRESENT;
		dwc3_omap_write_utmi_status(omap, val);
		break;

	case OMAP_DWC3_VBUS_VALID:
		dev_dbg(omap->dev, "VBUS Connect\n");

		val = dwc3_omap_read_utmi_status(omap);
		val &= ~USBOTGSS_UTMI_OTG_STATUS_SESSEND;
		val |= USBOTGSS_UTMI_OTG_STATUS_IDDIG
				| USBOTGSS_UTMI_OTG_STATUS_VBUSVALID
				| USBOTGSS_UTMI_OTG_STATUS_SESSVALID
				| USBOTGSS_UTMI_OTG_STATUS_POWERPRESENT;
		dwc3_omap_write_utmi_status(omap, val);
		break;

	case OMAP_DWC3_ID_FLOAT:
		if (omap->vbus_reg)
			regulator_disable(omap->vbus_reg);

	case OMAP_DWC3_VBUS_OFF:
		dev_dbg(omap->dev, "VBUS Disconnect\n");

		val = dwc3_omap_read_utmi_status(omap);
		val &= ~(USBOTGSS_UTMI_OTG_STATUS_SESSVALID
				| USBOTGSS_UTMI_OTG_STATUS_VBUSVALID
				| USBOTGSS_UTMI_OTG_STATUS_POWERPRESENT);
		val |= USBOTGSS_UTMI_OTG_STATUS_SESSEND
				| USBOTGSS_UTMI_OTG_STATUS_IDDIG;
		dwc3_omap_write_utmi_status(omap, val);
		break;

	default:
		dev_dbg(omap->dev, "invalid state\n");
	}
}

static irqreturn_t dwc3_omap_interrupt(int irq, void *_omap)
{
	struct dwc3_omap	*omap = _omap;
	u32			reg;

	reg = dwc3_omap_read_irqmisc_status(omap);

	if (reg & USBOTGSS_IRQMISC_DMADISABLECLR) {
		dev_dbg(omap->dev, "DMA Disable was Cleared\n");
		omap->dma_status = false;
	}

	if (reg & USBOTGSS_IRQMISC_OEVT)
		dev_dbg(omap->dev, "OTG Event\n");

	if (reg & USBOTGSS_IRQMISC_DRVVBUS_RISE)
		dev_dbg(omap->dev, "DRVVBUS Rise\n");

	if (reg & USBOTGSS_IRQMISC_CHRGVBUS_RISE)
		dev_dbg(omap->dev, "CHRGVBUS Rise\n");

	if (reg & USBOTGSS_IRQMISC_DISCHRGVBUS_RISE)
		dev_dbg(omap->dev, "DISCHRGVBUS Rise\n");

	if (reg & USBOTGSS_IRQMISC_IDPULLUP_RISE)
		dev_dbg(omap->dev, "IDPULLUP Rise\n");

	if (reg & USBOTGSS_IRQMISC_DRVVBUS_FALL)
		dev_dbg(omap->dev, "DRVVBUS Fall\n");

	if (reg & USBOTGSS_IRQMISC_CHRGVBUS_FALL)
		dev_dbg(omap->dev, "CHRGVBUS Fall\n");

	if (reg & USBOTGSS_IRQMISC_DISCHRGVBUS_FALL)
		dev_dbg(omap->dev, "DISCHRGVBUS Fall\n");

	if (reg & USBOTGSS_IRQMISC_IDPULLUP_FALL)
		dev_dbg(omap->dev, "IDPULLUP Fall\n");

	dwc3_omap_write_irqmisc_status(omap, reg);

	reg = dwc3_omap_read_irq0_status(omap);

	dwc3_omap_write_irq0_status(omap, reg);

	return IRQ_HANDLED;
}

static int dwc3_omap_remove_core(struct device *dev, void *c)
{
	struct platform_device *pdev = to_platform_device(dev);

	platform_device_unregister(pdev);

	return 0;
}

static void dwc3_omap_enable_irqs(struct dwc3_omap *omap)
{
	u32			reg;

	/* enable all IRQs */
	reg = USBOTGSS_IRQO_COREIRQ_ST;
	dwc3_omap_write_irq0_set(omap, reg);

	reg = (USBOTGSS_IRQMISC_OEVT |
			USBOTGSS_IRQMISC_DRVVBUS_RISE |
			USBOTGSS_IRQMISC_CHRGVBUS_RISE |
			USBOTGSS_IRQMISC_DISCHRGVBUS_RISE |
			USBOTGSS_IRQMISC_IDPULLUP_RISE |
			USBOTGSS_IRQMISC_DRVVBUS_FALL |
			USBOTGSS_IRQMISC_CHRGVBUS_FALL |
			USBOTGSS_IRQMISC_DISCHRGVBUS_FALL |
			USBOTGSS_IRQMISC_IDPULLUP_FALL);

	dwc3_omap_write_irqmisc_set(omap, reg);
}

static void dwc3_omap_disable_irqs(struct dwc3_omap *omap)
{
	/* disable all IRQs */
	dwc3_omap_write_irqmisc_set(omap, 0x00);
	dwc3_omap_write_irq0_set(omap, 0x00);
}

static u64 dwc3_omap_dma_mask = DMA_BIT_MASK(32);

static int dwc3_omap_id_notifier(struct notifier_block *nb,
	unsigned long event, void *ptr)
{
	struct dwc3_omap *omap = container_of(nb, struct dwc3_omap, id_nb);

	if (event)
		dwc3_omap_set_mailbox(omap, OMAP_DWC3_ID_GROUND);
	else
		dwc3_omap_set_mailbox(omap, OMAP_DWC3_ID_FLOAT);

	return NOTIFY_DONE;
}

static int dwc3_omap_vbus_notifier(struct notifier_block *nb,
	unsigned long event, void *ptr)
{
	struct dwc3_omap *omap = container_of(nb, struct dwc3_omap, vbus_nb);

	if (event)
		dwc3_omap_set_mailbox(omap, OMAP_DWC3_VBUS_VALID);
	else
		dwc3_omap_set_mailbox(omap, OMAP_DWC3_VBUS_OFF);

	return NOTIFY_DONE;
}

static int dwc3_omap_probe(struct platform_device *pdev)
{
	struct device_node	*node = pdev->dev.of_node;

	struct dwc3_omap	*omap;
	struct resource		*res;
	struct device		*dev = &pdev->dev;
	struct extcon_dev	*edev;
	struct regulator	*vbus_reg = NULL;

	int			ret = -ENOMEM;
	int			irq;

	int			utmi_mode = 0;
	int			x_major;

	u32			reg;

	void __iomem		*base;

	if (!node) {
		dev_err(dev, "device node not found\n");
		return -EINVAL;
	}

	omap = devm_kzalloc(dev, sizeof(*omap), GFP_KERNEL);
	if (!omap) {
		dev_err(dev, "not enough memory\n");
		return -ENOMEM;
	}

	platform_set_drvdata(pdev, omap);

	irq = platform_get_irq(pdev, 0);
	if (irq < 0) {
		dev_err(dev, "missing IRQ resource\n");
		return -EINVAL;
	}

	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
	base = devm_ioremap_resource(dev, res);
	if (IS_ERR(base))
		return PTR_ERR(base);

	if (of_property_read_bool(node, "vbus-supply")) {
		vbus_reg = devm_regulator_get(dev, "vbus");
		if (IS_ERR(vbus_reg)) {
			dev_err(dev, "vbus init failed\n");
			return PTR_ERR(vbus_reg);
		}
	}

	omap->dev	= dev;
	omap->irq	= irq;
	omap->base	= base;
	omap->vbus_reg	= vbus_reg;
	dev->dma_mask	= &dwc3_omap_dma_mask;

	pm_runtime_enable(dev);
	ret = pm_runtime_get_sync(dev);
	if (ret < 0) {
		dev_err(dev, "get_sync failed with err %d\n", ret);
		goto err0;
	}

	reg = dwc3_omap_readl(omap->base, USBOTGSS_REVISION);
	omap->revision = reg;
	x_major = USBOTGSS_REVISION_XMAJOR(reg);

	/* Differentiate between OMAP5 and AM437x */
	switch (x_major) {
	case USBOTGSS_REVISION_XMAJOR1:
	case USBOTGSS_REVISION_XMAJOR2:
		omap->irq_eoi_offset = 0;
		omap->irq0_offset = 0;
		omap->irqmisc_offset = 0;
		omap->utmi_otg_offset = 0;
		omap->debug_offset = 0;
		break;
	default:
		/* Default to the latest revision */
		omap->irq_eoi_offset = USBOTGSS_EOI_OFFSET;
		omap->irq0_offset = USBOTGSS_IRQ0_OFFSET;
		omap->irqmisc_offset = USBOTGSS_IRQMISC_OFFSET;
		omap->utmi_otg_offset = USBOTGSS_UTMI_OTG_OFFSET;
		omap->debug_offset = USBOTGSS_DEBUG_OFFSET;
		break;
	}

	/* For OMAP5(ES2.0) and AM437x x_major is 2 even though there are
	 * changes in wrapper registers, Using dt compatible for aegis
	 */

	if (of_device_is_compatible(node, "ti,am437x-dwc3")) {
		omap->irq_eoi_offset = USBOTGSS_EOI_OFFSET;
		omap->irq0_offset = USBOTGSS_IRQ0_OFFSET;
		omap->irqmisc_offset = USBOTGSS_IRQMISC_OFFSET;
		omap->utmi_otg_offset = USBOTGSS_UTMI_OTG_OFFSET;
		omap->debug_offset = USBOTGSS_DEBUG_OFFSET;
	}

	reg = dwc3_omap_read_utmi_status(omap);

	of_property_read_u32(node, "utmi-mode", &utmi_mode);

	switch (utmi_mode) {
	case DWC3_OMAP_UTMI_MODE_SW:
		reg |= USBOTGSS_UTMI_OTG_STATUS_SW_MODE;
		break;
	case DWC3_OMAP_UTMI_MODE_HW:
		reg &= ~USBOTGSS_UTMI_OTG_STATUS_SW_MODE;
		break;
	default:
		dev_dbg(dev, "UNKNOWN utmi mode %d\n", utmi_mode);
	}

	dwc3_omap_write_utmi_status(omap, reg);

	/* check the DMA Status */
	reg = dwc3_omap_readl(omap->base, USBOTGSS_SYSCONFIG);
	omap->dma_status = !!(reg & USBOTGSS_SYSCONFIG_DMADISABLE);

	ret = devm_request_irq(dev, omap->irq, dwc3_omap_interrupt, 0,
			"dwc3-omap", omap);
	if (ret) {
		dev_err(dev, "failed to request IRQ #%d --> %d\n",
				omap->irq, ret);
		goto err1;
	}

	dwc3_omap_enable_irqs(omap);

	if (of_property_read_bool(node, "extcon")) {
		edev = extcon_get_edev_by_phandle(dev, 0);
		if (IS_ERR(edev)) {
			dev_vdbg(dev, "couldn't get extcon device\n");
			ret = -EPROBE_DEFER;
			goto err2;
		}

		omap->vbus_nb.notifier_call = dwc3_omap_vbus_notifier;
		ret = extcon_register_interest(&omap->extcon_vbus_dev,
			edev->name, "USB", &omap->vbus_nb);
		if (ret < 0)
			dev_vdbg(dev, "failed to register notifier for USB\n");
		omap->id_nb.notifier_call = dwc3_omap_id_notifier;
		ret = extcon_register_interest(&omap->extcon_id_dev, edev->name,
					 "USB-HOST", &omap->id_nb);
		if (ret < 0)
			dev_vdbg(dev,
				"failed to register notifier for USB-HOST\n");

		if (extcon_get_cable_state(edev, "USB") == true)
			dwc3_omap_set_mailbox(omap, OMAP_DWC3_VBUS_VALID);
		if (extcon_get_cable_state(edev, "USB-HOST") == true)
			dwc3_omap_set_mailbox(omap, OMAP_DWC3_ID_GROUND);
	}

	ret = of_platform_populate(node, NULL, NULL, dev);
	if (ret) {
		dev_err(&pdev->dev, "failed to create dwc3 core\n");
		goto err3;
	}

	return 0;

err3:
	if (omap->extcon_vbus_dev.edev)
		extcon_unregister_interest(&omap->extcon_vbus_dev);
	if (omap->extcon_id_dev.edev)
		extcon_unregister_interest(&omap->extcon_id_dev);

err2:
	dwc3_omap_disable_irqs(omap);

err1:
	pm_runtime_put_sync(dev);

err0:
	pm_runtime_disable(dev);

	return ret;
}

static int dwc3_omap_remove(struct platform_device *pdev)
{
	struct dwc3_omap	*omap = platform_get_drvdata(pdev);

	if (omap->extcon_vbus_dev.edev)
		extcon_unregister_interest(&omap->extcon_vbus_dev);
	if (omap->extcon_id_dev.edev)
		extcon_unregister_interest(&omap->extcon_id_dev);
	dwc3_omap_disable_irqs(omap);
	pm_runtime_put_sync(&pdev->dev);
	pm_runtime_disable(&pdev->dev);
	device_for_each_child(&pdev->dev, NULL, dwc3_omap_remove_core);

	return 0;
}

static const struct of_device_id of_dwc3_match[] = {
	{
		.compatible =	"ti,dwc3"
	},
	{
		.compatible =	"ti,am437x-dwc3"
	},
	{ },
};
MODULE_DEVICE_TABLE(of, of_dwc3_match);

#ifdef CONFIG_PM_SLEEP
static int dwc3_omap_prepare(struct device *dev)
{
	struct dwc3_omap	*omap = dev_get_drvdata(dev);

	dwc3_omap_disable_irqs(omap);

	return 0;
}

static void dwc3_omap_complete(struct device *dev)
{
	struct dwc3_omap	*omap = dev_get_drvdata(dev);

	dwc3_omap_enable_irqs(omap);
}

static int dwc3_omap_suspend(struct device *dev)
{
	struct dwc3_omap	*omap = dev_get_drvdata(dev);

	omap->utmi_otg_status = dwc3_omap_read_utmi_status(omap);

	return 0;
}

static int dwc3_omap_resume(struct device *dev)
{
	struct dwc3_omap	*omap = dev_get_drvdata(dev);

	dwc3_omap_write_utmi_status(omap, omap->utmi_otg_status);

	pm_runtime_disable(dev);
	pm_runtime_set_active(dev);
	pm_runtime_enable(dev);

	return 0;
}

static const struct dev_pm_ops dwc3_omap_dev_pm_ops = {
	.prepare	= dwc3_omap_prepare,
	.complete	= dwc3_omap_complete,

	SET_SYSTEM_SLEEP_PM_OPS(dwc3_omap_suspend, dwc3_omap_resume)
};

#define DEV_PM_OPS	(&dwc3_omap_dev_pm_ops)
#else
#define DEV_PM_OPS	NULL
#endif /* CONFIG_PM_SLEEP */

static struct platform_driver dwc3_omap_driver = {
	.probe		= dwc3_omap_probe,
	.remove		= dwc3_omap_remove,
	.driver		= {
		.name	= "omap-dwc3",
		.of_match_table	= of_dwc3_match,
		.pm	= DEV_PM_OPS,
	},
};

module_platform_driver(dwc3_omap_driver);

MODULE_ALIAS("platform:omap-dwc3");
MODULE_AUTHOR("Felipe Balbi <balbi@ti.com>");
MODULE_LICENSE("GPL v2");
MODULE_DESCRIPTION("DesignWare USB3 OMAP Glue Layer");