/*
 *  linux/arch/i386/kernel/setup.c
 *
 *  Copyright (C) 1995  Linus Torvalds
 *
 *  Enhanced CPU type detection by Mike Jagdis, Patrick St. Jean
 *  and Martin Mares, November 1997.
 *
 *  Force Cyrix 6x86(MX) and M II processors to report MTRR capability
 *  and Cyrix "coma bug" recognition by
 *      Zoltán Böszörményi <zboszor@mail.externet.hu> February 1999.
 * 
 *  Force Centaur C6 processors to report MTRR capability.
 *      Bart Hartgers <bart@etpmod.phys.tue.nl>, May 1999.
 *
 *  Intel Mobile Pentium II detection fix. Sean Gilley, June 1999.
 *
 *  IDT Winchip tweaks, misc clean ups.
 *	Dave Jones <davej@suse.de>, August 1999
 *
 *  Support of BIGMEM added by Gerhard Wichert, Siemens AG, July 1999
 *
 *  Better detection of Centaur/IDT WinChip models.
 *      Bart Hartgers <bart@etpmod.phys.tue.nl>, August 1999.
 *
 *  Memory region support
 *	David Parsons <orc@pell.chi.il.us>, July-August 1999
 *
 *  Cleaned up cache-detection code
 *	Dave Jones <davej@suse.de>, October 1999
 *
 *	Added proper L2 cache detection for Coppermine
 *	Dragan Stancevic <visitor@valinux.com>, October 1999
 *
 *  Added the original array for capability flags but forgot to credit 
 *  myself :) (~1998) Fixed/cleaned up some cpu_model_info and other stuff
 *  	Jauder Ho <jauderho@carumba.com>, January 2000
 *
 *  Detection for Celeron coppermine, identify_cpu() overhauled,
 *  and a few other clean ups.
 *  Dave Jones <davej@suse.de>, April 2000
 *
 *  Pentium III FXSR, SSE support
 *  General FPU state handling cleanups
 *	Gareth Hughes <gareth@valinux.com>, May 2000
 *
 *  Added proper Cascades CPU and L2 cache detection for Cascades
 *  and 8-way type cache happy bunch from Intel:^)
 *  Dragan Stancevic <visitor@valinux.com>, May 2000 
 *
 *  Forward port AMD Duron errata T13 from 2.2.17pre
 *  Dave Jones <davej@suse.de>, August 2000
 *
 *  Forward port lots of fixes/improvements from 2.2.18pre
 *  Cyrix III, Pentium IV support.
 *  Dave Jones <davej@suse.de>, October 2000
 *
 *  Massive cleanup of CPU detection and bug handling;
 *  Transmeta CPU detection,
 *  H. Peter Anvin <hpa@zytor.com>, November 2000
 *
 *  Added E820 sanitization routine (removes overlapping memory regions);
 *  Brian Moyle <bmoyle@mvista.com>, February 2001
 *
 *  VIA C3 Support.
 *  Dave Jones <davej@suse.de>, March 2001
 */

/*
 * This file handles the architecture-dependent parts of initialization
 */

#include <linux/errno.h>
#include <linux/sched.h>
#include <linux/kernel.h>
#include <linux/mm.h>
#include <linux/stddef.h>
#include <linux/unistd.h>
#include <linux/ptrace.h>
#include <linux/slab.h>
#include <linux/user.h>
#include <linux/a.out.h>
#include <linux/tty.h>
#include <linux/ioport.h>
#include <linux/delay.h>
#include <linux/config.h>
#include <linux/init.h>
#include <linux/apm_bios.h>
#ifdef CONFIG_BLK_DEV_RAM
#include <linux/blk.h>
#endif
#include <linux/highmem.h>
#include <linux/bootmem.h>
#include <asm/processor.h>
#include <linux/console.h>
#include <asm/uaccess.h>
#include <asm/system.h>
#include <asm/io.h>
#include <asm/smp.h>
#include <asm/cobalt.h>
#include <asm/msr.h>
#include <asm/desc.h>
#include <asm/e820.h>
#include <asm/dma.h>
#include <asm/mpspec.h>
#include <asm/mmu_context.h>
/*
 * Machine setup..
 */

char ignore_irq13;		/* set if exception 16 works */
struct cpuinfo_x86 boot_cpu_data = { 0, 0, 0, 0, -1, 1, 0, 0, -1 };

unsigned long mmu_cr4_features;

/*
 * Bus types ..
 */
#ifdef CONFIG_EISA
int EISA_bus;
#endif
int MCA_bus;

/* for MCA, but anyone else can use it if they want */
unsigned int machine_id;
unsigned int machine_submodel_id;
unsigned int BIOS_revision;
unsigned int mca_pentium_flag;

/* For PCI or other memory-mapped resources */
unsigned long pci_mem_start = 0x10000000;

/*
 * Setup options
 */
struct drive_info_struct { char dummy[32]; } drive_info;
struct screen_info screen_info;
struct apm_info apm_info;
struct sys_desc_table_struct {
	unsigned short length;
	unsigned char table[0];
};

struct e820map e820;

unsigned char aux_device_present;

extern int root_mountflags;
extern char _text, _etext, _edata, _end;
extern unsigned long cpu_khz;

static int disable_x86_serial_nr __initdata = 1;
static int disable_x86_fxsr __initdata = 0;

/*
 * This is set up by the setup-routine at boot-time
 */
#define PARAM	((unsigned char *)empty_zero_page)
#define SCREEN_INFO (*(struct screen_info *) (PARAM+0))
#define EXT_MEM_K (*(unsigned short *) (PARAM+2))
#define ALT_MEM_K (*(unsigned long *) (PARAM+0x1e0))
#define E820_MAP_NR (*(char*) (PARAM+E820NR))
#define E820_MAP    ((struct e820entry *) (PARAM+E820MAP))
#define APM_BIOS_INFO (*(struct apm_bios_info *) (PARAM+0x40))
#define DRIVE_INFO (*(struct drive_info_struct *) (PARAM+0x80))
#define SYS_DESC_TABLE (*(struct sys_desc_table_struct*)(PARAM+0xa0))
#define MOUNT_ROOT_RDONLY (*(unsigned short *) (PARAM+0x1F2))
#define RAMDISK_FLAGS (*(unsigned short *) (PARAM+0x1F8))
#define ORIG_ROOT_DEV (*(unsigned short *) (PARAM+0x1FC))
#define AUX_DEVICE_INFO (*(unsigned char *) (PARAM+0x1FF))
#define LOADER_TYPE (*(unsigned char *) (PARAM+0x210))
#define KERNEL_START (*(unsigned long *) (PARAM+0x214))
#define INITRD_START (*(unsigned long *) (PARAM+0x218))
#define INITRD_SIZE (*(unsigned long *) (PARAM+0x21c))
#define COMMAND_LINE ((char *) (PARAM+2048))
#define COMMAND_LINE_SIZE 256

#define RAMDISK_IMAGE_START_MASK  	0x07FF
#define RAMDISK_PROMPT_FLAG		0x8000
#define RAMDISK_LOAD_FLAG		0x4000	

#ifdef	CONFIG_VISWS
char visws_board_type = -1;
char visws_board_rev = -1;

#define	PIIX_PM_START		0x0F80

#define	SIO_GPIO_START		0x0FC0

#define	SIO_PM_START		0x0FC8

#define	PMBASE			PIIX_PM_START
#define	GPIREG0			(PMBASE+0x30)
#define	GPIREG(x)		(GPIREG0+((x)/8))
#define	PIIX_GPI_BD_ID1		18
#define	PIIX_GPI_BD_REG		GPIREG(PIIX_GPI_BD_ID1)

#define	PIIX_GPI_BD_SHIFT	(PIIX_GPI_BD_ID1 % 8)

#define	SIO_INDEX	0x2e
#define	SIO_DATA	0x2f

#define	SIO_DEV_SEL	0x7
#define	SIO_DEV_ENB	0x30
#define	SIO_DEV_MSB	0x60
#define	SIO_DEV_LSB	0x61

#define	SIO_GP_DEV	0x7

#define	SIO_GP_BASE	SIO_GPIO_START
#define	SIO_GP_MSB	(SIO_GP_BASE>>8)
#define	SIO_GP_LSB	(SIO_GP_BASE&0xff)

#define	SIO_GP_DATA1	(SIO_GP_BASE+0)

#define	SIO_PM_DEV	0x8

#define	SIO_PM_BASE	SIO_PM_START
#define	SIO_PM_MSB	(SIO_PM_BASE>>8)
#define	SIO_PM_LSB	(SIO_PM_BASE&0xff)
#define	SIO_PM_INDEX	(SIO_PM_BASE+0)
#define	SIO_PM_DATA	(SIO_PM_BASE+1)

#define	SIO_PM_FER2	0x1

#define	SIO_PM_GP_EN	0x80

static void
visws_get_board_type_and_rev(void)
{
	int raw;

	visws_board_type = (char)(inb_p(PIIX_GPI_BD_REG) & PIIX_GPI_BD_REG)
							 >> PIIX_GPI_BD_SHIFT;
/*
 * Get Board rev.
 * First, we have to initialize the 307 part to allow us access
 * to the GPIO registers.  Let's map them at 0x0fc0 which is right
 * after the PIIX4 PM section.
 */
	outb_p(SIO_DEV_SEL, SIO_INDEX);
	outb_p(SIO_GP_DEV, SIO_DATA);	/* Talk to GPIO regs. */
    
	outb_p(SIO_DEV_MSB, SIO_INDEX);
	outb_p(SIO_GP_MSB, SIO_DATA);	/* MSB of GPIO base address */

	outb_p(SIO_DEV_LSB, SIO_INDEX);
	outb_p(SIO_GP_LSB, SIO_DATA);	/* LSB of GPIO base address */

	outb_p(SIO_DEV_ENB, SIO_INDEX);
	outb_p(1, SIO_DATA);		/* Enable GPIO registers. */
    
/*
 * Now, we have to map the power management section to write
 * a bit which enables access to the GPIO registers.
 * What lunatic came up with this shit?
 */
	outb_p(SIO_DEV_SEL, SIO_INDEX);
	outb_p(SIO_PM_DEV, SIO_DATA);	/* Talk to GPIO regs. */

	outb_p(SIO_DEV_MSB, SIO_INDEX);
	outb_p(SIO_PM_MSB, SIO_DATA);	/* MSB of PM base address */
    
	outb_p(SIO_DEV_LSB, SIO_INDEX);
	outb_p(SIO_PM_LSB, SIO_DATA);	/* LSB of PM base address */

	outb_p(SIO_DEV_ENB, SIO_INDEX);
	outb_p(1, SIO_DATA);		/* Enable PM registers. */
    
/*
 * Now, write the PM register which enables the GPIO registers.
 */
	outb_p(SIO_PM_FER2, SIO_PM_INDEX);
	outb_p(SIO_PM_GP_EN, SIO_PM_DATA);
    
/*
 * Now, initialize the GPIO registers.
 * We want them all to be inputs which is the
 * power on default, so let's leave them alone.
 * So, let's just read the board rev!
 */
	raw = inb_p(SIO_GP_DATA1);
	raw &= 0x7f;	/* 7 bits of valid board revision ID. */

	if (visws_board_type == VISWS_320) {
		if (raw < 0x6) {
			visws_board_rev = 4;
		} else if (raw < 0xc) {
			visws_board_rev = 5;
		} else {
			visws_board_rev = 6;
	
		}
	} else if (visws_board_type == VISWS_540) {
			visws_board_rev = 2;
		} else {
			visws_board_rev = raw;
		}

		printk(KERN_INFO "Silicon Graphics %s (rev %d)\n",
			visws_board_type == VISWS_320 ? "320" :
			(visws_board_type == VISWS_540 ? "540" :
					"unknown"),
					visws_board_rev);
	}
#endif


static char command_line[COMMAND_LINE_SIZE];
       char saved_command_line[COMMAND_LINE_SIZE];

struct resource standard_io_resources[] = {
	{ "dma1", 0x00, 0x1f, IORESOURCE_BUSY },
	{ "pic1", 0x20, 0x3f, IORESOURCE_BUSY },
	{ "timer", 0x40, 0x5f, IORESOURCE_BUSY },
	{ "keyboard", 0x60, 0x6f, IORESOURCE_BUSY },
	{ "dma page reg", 0x80, 0x8f, IORESOURCE_BUSY },
	{ "pic2", 0xa0, 0xbf, IORESOURCE_BUSY },
	{ "dma2", 0xc0, 0xdf, IORESOURCE_BUSY },
	{ "fpu", 0xf0, 0xff, IORESOURCE_BUSY }
};

#define STANDARD_IO_RESOURCES (sizeof(standard_io_resources)/sizeof(struct resource))

static struct resource code_resource = { "Kernel code", 0x100000, 0 };
static struct resource data_resource = { "Kernel data", 0, 0 };
static struct resource vram_resource = { "Video RAM area", 0xa0000, 0xbffff, IORESOURCE_BUSY };

/* System ROM resources */
#define MAXROMS 6
static struct resource rom_resources[MAXROMS] = {
	{ "System ROM", 0xF0000, 0xFFFFF, IORESOURCE_BUSY },
	{ "Video ROM", 0xc0000, 0xc7fff, IORESOURCE_BUSY }
};

#define romsignature(x) (*(unsigned short *)(x) == 0xaa55)

static void __init probe_roms(void)
{
	int roms = 1;
	unsigned long base;
	unsigned char *romstart;

	request_resource(&iomem_resource, rom_resources+0);

	/* Video ROM is standard at C000:0000 - C7FF:0000, check signature */
	for (base = 0xC0000; base < 0xE0000; base += 2048) {
		romstart = bus_to_virt(base);
		if (!romsignature(romstart))
			continue;
		request_resource(&iomem_resource, rom_resources + roms);
		roms++;
		break;
	}

	/* Extension roms at C800:0000 - DFFF:0000 */
	for (base = 0xC8000; base < 0xE0000; base += 2048) {
		unsigned long length;

		romstart = bus_to_virt(base);
		if (!romsignature(romstart))
			continue;
		length = romstart[2] * 512;
		if (length) {
			unsigned int i;
			unsigned char chksum;

			chksum = 0;
			for (i = 0; i < length; i++)
				chksum += romstart[i];

			/* Good checksum? */
			if (!chksum) {
				rom_resources[roms].start = base;
				rom_resources[roms].end = base + length - 1;
				rom_resources[roms].name = "Extension ROM";
				rom_resources[roms].flags = IORESOURCE_BUSY;

				request_resource(&iomem_resource, rom_resources + roms);
				roms++;
				if (roms >= MAXROMS)
					return;
			}
		}
	}

	/* Final check for motherboard extension rom at E000:0000 */
	base = 0xE0000;
	romstart = bus_to_virt(base);

	if (romsignature(romstart)) {
		rom_resources[roms].start = base;
		rom_resources[roms].end = base + 65535;
		rom_resources[roms].name = "Extension ROM";
		rom_resources[roms].flags = IORESOURCE_BUSY;

		request_resource(&iomem_resource, rom_resources + roms);
	}
}

void __init add_memory_region(unsigned long long start,
                                  unsigned long long size, int type)
{
	int x = e820.nr_map;

	if (x == E820MAX) {
	    printk(KERN_ERR "Ooops! Too many entries in the memory map!\n");
	    return;
	}

	e820.map[x].addr = start;
	e820.map[x].size = size;
	e820.map[x].type = type;
	e820.nr_map++;
} /* add_memory_region */

#define E820_DEBUG	1

static void __init print_memory_map(char *who)
{
	int i;

	for (i = 0; i < e820.nr_map; i++) {
		printk(" %s: %016Lx - %016Lx ", who,
			e820.map[i].addr,
			e820.map[i].addr + e820.map[i].size);
		switch (e820.map[i].type) {
		case E820_RAM:	printk("(usable)\n");
				break;
		case E820_RESERVED:
				printk("(reserved)\n");
				break;
		case E820_ACPI:
				printk("(ACPI data)\n");
				break;
		case E820_NVS:
				printk("(ACPI NVS)\n");
				break;
		default:	printk("type %lu\n", e820.map[i].type);
				break;
		}
	}
}

/*
 * Sanitize the BIOS e820 map.
 *
 * Some e820 responses include overlapping entries.  The following 
 * replaces the original e820 map with a new one, removing overlaps.
 *
 */
static int __init sanitize_e820_map(struct e820entry * biosmap, char * pnr_map)
{
	struct change_member {
		struct e820entry *pbios; /* pointer to original bios entry */
		unsigned long long addr; /* address for this change point */
	};
	struct change_member change_point_list[2*E820MAX];
	struct change_member *change_point[2*E820MAX];
	struct e820entry *overlap_list[E820MAX];
	struct e820entry new_bios[E820MAX];
	struct change_member *change_tmp;
	unsigned long current_type, last_type;
	unsigned long long last_addr;
	int chgidx, still_changing;
	int overlap_entries;
	int new_bios_entry;
	int old_nr, new_nr;
	int i;

	/*
		Visually we're performing the following (1,2,3,4 = memory types)...

		Sample memory map (w/overlaps):
		   ____22__________________
		   ______________________4_
		   ____1111________________
		   _44_____________________
		   11111111________________
		   ____________________33__
		   ___________44___________
		   __________33333_________
		   ______________22________
		   ___________________2222_
		   _________111111111______
		   _____________________11_
		   _________________4______

		Sanitized equivalent (no overlap):
		   1_______________________
		   _44_____________________
		   ___1____________________
		   ____22__________________
		   ______11________________
		   _________1______________
		   __________3_____________
		   ___________44___________
		   _____________33_________
		   _______________2________
		   ________________1_______
		   _________________4______
		   ___________________2____
		   ____________________33__
		   ______________________4_
	*/

	/* if there's only one memory region, don't bother */
	if (*pnr_map < 2)
		return -1;

	old_nr = *pnr_map;

	/* bail out if we find any unreasonable addresses in bios map */
	for (i=0; i<old_nr; i++)
		if (biosmap[i].addr + biosmap[i].size < biosmap[i].addr)
			return -1;

	/* create pointers for initial change-point information (for sorting) */
	for (i=0; i < 2*old_nr; i++)
		change_point[i] = &change_point_list[i];

	/* record all known change-points (starting and ending addresses) */
	chgidx = 0;
	for (i=0; i < old_nr; i++)	{
		change_point[chgidx]->addr = biosmap[i].addr;
		change_point[chgidx++]->pbios = &biosmap[i];
		change_point[chgidx]->addr = biosmap[i].addr + biosmap[i].size;
		change_point[chgidx++]->pbios = &biosmap[i];
	}

	/* sort change-point list by memory addresses (low -> high) */
	still_changing = 1;
	while (still_changing)	{
		still_changing = 0;
		for (i=1; i < 2*old_nr; i++)  {
			/* if <current_addr> > <last_addr>, swap */
			/* or, if current=<start_addr> & last=<end_addr>, swap */
			if ((change_point[i]->addr < change_point[i-1]->addr) ||
				((change_point[i]->addr == change_point[i-1]->addr) &&
				 (change_point[i]->addr == change_point[i]->pbios->addr) &&
				 (change_point[i-1]->addr != change_point[i-1]->pbios->addr))
			   )
			{
				change_tmp = change_point[i];
				change_point[i] = change_point[i-1];
				change_point[i-1] = change_tmp;
				still_changing=1;
			}
		}
	}

	/* create a new bios memory map, removing overlaps */
	overlap_entries=0;	 /* number of entries in the overlap table */
	new_bios_entry=0;	 /* index for creating new bios map entries */
	last_type = 0;		 /* start with undefined memory type */
	last_addr = 0;		 /* start with 0 as last starting address */
	/* loop through change-points, determining affect on the new bios map */
	for (chgidx=0; chgidx < 2*old_nr; chgidx++)
	{
		/* keep track of all overlapping bios entries */
		if (change_point[chgidx]->addr == change_point[chgidx]->pbios->addr)
		{
			/* add map entry to overlap list (> 1 entry implies an overlap) */
			overlap_list[overlap_entries++]=change_point[chgidx]->pbios;
		}
		else
		{
			/* remove entry from list (order independent, so swap with last) */
			for (i=0; i<overlap_entries; i++)
			{
				if (overlap_list[i] == change_point[chgidx]->pbios)
					overlap_list[i] = overlap_list[overlap_entries-1];
			}
			overlap_entries--;
		}
		/* if there are overlapping entries, decide which "type" to use */
		/* (larger value takes precedence -- 1=usable, 2,3,4,4+=unusable) */
		current_type = 0;
		for (i=0; i<overlap_entries; i++)
			if (overlap_list[i]->type > current_type)
				current_type = overlap_list[i]->type;
		/* continue building up new bios map based on this information */
		if (current_type != last_type)	{
			if (last_type != 0)	 {
				new_bios[new_bios_entry].size =
					change_point[chgidx]->addr - last_addr;
				/* move forward only if the new size was non-zero */
				if (new_bios[new_bios_entry].size != 0)
					if (++new_bios_entry >= E820MAX)
						break; 	/* no more space left for new bios entries */
			}
			if (current_type != 0)	{
				new_bios[new_bios_entry].addr = change_point[chgidx]->addr;
				new_bios[new_bios_entry].type = current_type;
				last_addr=change_point[chgidx]->addr;
			}
			last_type = current_type;
		}
	}
	new_nr = new_bios_entry;   /* retain count for new bios entries */

	/* copy new bios mapping into original location */
	memcpy(biosmap, new_bios, new_nr*sizeof(struct e820entry));
	*pnr_map = new_nr;

	return 0;
}

/*
 * Copy the BIOS e820 map into a safe place.
 *
 * Sanity-check it while we're at it..
 *
 * If we're lucky and live on a modern system, the setup code
 * will have given us a memory map that we can use to properly
 * set up memory.  If we aren't, we'll fake a memory map.
 *
 * We check to see that the memory map contains at least 2 elements
 * before we'll use it, because the detection code in setup.S may
 * not be perfect and most every PC known to man has two memory
 * regions: one from 0 to 640k, and one from 1mb up.  (The IBM
 * thinkpad 560x, for example, does not cooperate with the memory
 * detection code.)
 */
static int __init copy_e820_map(struct e820entry * biosmap, int nr_map)
{
	/* Only one memory region (or negative)? Ignore it */
	if (nr_map < 2)
		return -1;

	do {
		unsigned long long start = biosmap->addr;
		unsigned long long size = biosmap->size;
		unsigned long long end = start + size;
		unsigned long type = biosmap->type;

		/* Overflow in 64 bits? Ignore the memory map. */
		if (start > end)
			return -1;

		/*
		 * Some BIOSes claim RAM in the 640k - 1M region.
		 * Not right. Fix it up.
		 */
		if (type == E820_RAM) {
			if (start < 0x100000ULL && end > 0xA0000ULL) {
				if (start < 0xA0000ULL)
					add_memory_region(start, 0xA0000ULL-start, type);
				if (end <= 0x100000ULL)
					continue;
				start = 0x100000ULL;
				size = end - start;
			}
		}
		add_memory_region(start, size, type);
	} while (biosmap++,--nr_map);
	return 0;
}

/*
 * Do NOT EVER look at the BIOS memory size location.
 * It does not work on many machines.
 */
#define LOWMEMSIZE()	(0x9f000)

void __init setup_memory_region(void)
{
	char *who = "BIOS-e820";

	/*
	 * Try to copy the BIOS-supplied E820-map.
	 *
	 * Otherwise fake a memory map; one section from 0k->640k,
	 * the next section from 1mb->appropriate_mem_k
	 */
	sanitize_e820_map(E820_MAP, &E820_MAP_NR);
	if (copy_e820_map(E820_MAP, E820_MAP_NR) < 0) {
		unsigned long mem_size;

		/* compare results from other methods and take the greater */
		if (ALT_MEM_K < EXT_MEM_K) {
			mem_size = EXT_MEM_K;
			who = "BIOS-88";
		} else {
			mem_size = ALT_MEM_K;
			who = "BIOS-e801";
		}

		e820.nr_map = 0;
		add_memory_region(0, LOWMEMSIZE(), E820_RAM);
		add_memory_region(HIGH_MEMORY, mem_size << 10, E820_RAM);
  	}
	printk(KERN_INFO "BIOS-provided physical RAM map:\n");
	print_memory_map(who);
} /* setup_memory_region */


static inline void parse_mem_cmdline (char ** cmdline_p)
{
	char c = ' ', *to = command_line, *from = COMMAND_LINE;
	int len = 0;
	int usermem = 0;

	/* Save unparsed command line copy for /proc/cmdline */
	memcpy(saved_command_line, COMMAND_LINE, COMMAND_LINE_SIZE);
	saved_command_line[COMMAND_LINE_SIZE-1] = '\0';

	for (;;) {
		/*
		 * "mem=nopentium" disables the 4MB page tables.
		 * "mem=XXX[kKmM]" defines a memory region from HIGH_MEM
		 * to <mem>, overriding the bios size.
		 * "mem=XXX[KkmM]@XXX[KkmM]" defines a memory region from
		 * <start> to <start>+<mem>, overriding the bios size.
		 */
		if (c == ' ' && !memcmp(from, "mem=", 4)) {
			if (to != command_line)
				to--;
			if (!memcmp(from+4, "nopentium", 9)) {
				from += 9+4;
				clear_bit(X86_FEATURE_PSE, &boot_cpu_data.x86_capability);
			} else if (!memcmp(from+4, "exactmap", 8)) {
				from += 8+4;
				e820.nr_map = 0;
				usermem = 1;
			} else {
				/* If the user specifies memory size, we
				 * blow away any automatically generated
				 * size
				 */
				unsigned long long start_at, mem_size;
 
				if (usermem == 0) {
					/* first time in: zap the whitelist
					 * and reinitialize it with the
					 * standard low-memory region.
					 */
					e820.nr_map = 0;
					usermem = 1;
					add_memory_region(0, LOWMEMSIZE(), E820_RAM);
				}
				mem_size = memparse(from+4, &from);
				if (*from == '@')
					start_at = memparse(from+1, &from);
				else {
					start_at = HIGH_MEMORY;
					mem_size -= HIGH_MEMORY;
					usermem=0;
				}
				add_memory_region(start_at, mem_size, E820_RAM);
			}
		}
		c = *(from++);
		if (!c)
			break;
		if (COMMAND_LINE_SIZE <= ++len)
			break;
		*(to++) = c;
	}
	*to = '\0';
	*cmdline_p = command_line;
	if (usermem) {
		printk(KERN_INFO "user-defined physical RAM map:\n");
		print_memory_map("user");
	}
}

void __init setup_arch(char **cmdline_p)
{
	unsigned long bootmap_size, low_mem_size;
	unsigned long start_pfn, max_pfn, max_low_pfn;
	int i;

#ifdef CONFIG_VISWS
	visws_get_board_type_and_rev();
#endif

 	ROOT_DEV = to_kdev_t(ORIG_ROOT_DEV);
 	drive_info = DRIVE_INFO;
 	screen_info = SCREEN_INFO;
	apm_info.bios = APM_BIOS_INFO;
	if( SYS_DESC_TABLE.length != 0 ) {
		MCA_bus = SYS_DESC_TABLE.table[3] &0x2;
		machine_id = SYS_DESC_TABLE.table[0];
		machine_submodel_id = SYS_DESC_TABLE.table[1];
		BIOS_revision = SYS_DESC_TABLE.table[2];
	}
	aux_device_present = AUX_DEVICE_INFO;

#ifdef CONFIG_BLK_DEV_RAM
	rd_image_start = RAMDISK_FLAGS & RAMDISK_IMAGE_START_MASK;
	rd_prompt = ((RAMDISK_FLAGS & RAMDISK_PROMPT_FLAG) != 0);
	rd_doload = ((RAMDISK_FLAGS & RAMDISK_LOAD_FLAG) != 0);
#endif
	setup_memory_region();

	if (!MOUNT_ROOT_RDONLY)
		root_mountflags &= ~MS_RDONLY;
	init_mm.start_code = (unsigned long) &_text;
	init_mm.end_code = (unsigned long) &_etext;
	init_mm.end_data = (unsigned long) &_edata;
	init_mm.brk = (unsigned long) &_end;

	code_resource.start = virt_to_bus(&_text);
	code_resource.end = virt_to_bus(&_etext)-1;
	data_resource.start = virt_to_bus(&_etext);
	data_resource.end = virt_to_bus(&_edata)-1;

	parse_mem_cmdline(cmdline_p);

#define PFN_UP(x)	(((x) + PAGE_SIZE-1) >> PAGE_SHIFT)
#define PFN_DOWN(x)	((x) >> PAGE_SHIFT)
#define PFN_PHYS(x)	((x) << PAGE_SHIFT)

/*
 * 128MB for vmalloc and initrd
 */
#define VMALLOC_RESERVE	(unsigned long)(128 << 20)
#define MAXMEM		(unsigned long)(-PAGE_OFFSET-VMALLOC_RESERVE)
#define MAXMEM_PFN	PFN_DOWN(MAXMEM)
#define MAX_NONPAE_PFN	(1 << 20)

	/*
	 * partially used pages are not usable - thus
	 * we are rounding upwards:
	 */
	start_pfn = PFN_UP(__pa(&_end));

	/*
	 * Find the highest page frame number we have available
	 */
	max_pfn = 0;
	for (i = 0; i < e820.nr_map; i++) {
		unsigned long start, end;
		/* RAM? */
		if (e820.map[i].type != E820_RAM)
			continue;
		start = PFN_UP(e820.map[i].addr);
		end = PFN_DOWN(e820.map[i].addr + e820.map[i].size);
		if (start >= end)
			continue;
		if (end > max_pfn)
			max_pfn = end;
	}

	/*
	 * Determine low and high memory ranges:
	 */
	max_low_pfn = max_pfn;
	if (max_low_pfn > MAXMEM_PFN) {
		max_low_pfn = MAXMEM_PFN;
#ifndef CONFIG_HIGHMEM
		/* Maximum memory usable is what is directly addressable */
		printk(KERN_WARNING "Warning only %ldMB will be used.\n",
					MAXMEM>>20);
		if (max_pfn > MAX_NONPAE_PFN)
			printk(KERN_WARNING "Use a PAE enabled kernel.\n");
		else
			printk(KERN_WARNING "Use a HIGHMEM enabled kernel.\n");
#else /* !CONFIG_HIGHMEM */
#ifndef CONFIG_X86_PAE
		if (max_pfn > MAX_NONPAE_PFN) {
			max_pfn = MAX_NONPAE_PFN;
			printk(KERN_WARNING "Warning only 4GB will be used.\n");
			printk(KERN_WARNING "Use a PAE enabled kernel.\n");
		}
#endif /* !CONFIG_X86_PAE */
#endif /* !CONFIG_HIGHMEM */
	}

#ifdef CONFIG_HIGHMEM
	highstart_pfn = highend_pfn = max_pfn;
	if (max_pfn > MAXMEM_PFN) {
		highstart_pfn = MAXMEM_PFN;
		printk(KERN_NOTICE "%ldMB HIGHMEM available.\n",
			pages_to_mb(highend_pfn - highstart_pfn));
	}
#endif
	/*
	 * Initialize the boot-time allocator (with low memory only):
	 */
	bootmap_size = init_bootmem(start_pfn, max_low_pfn);

	/*
	 * Register fully available low RAM pages with the bootmem allocator.
	 */
	for (i = 0; i < e820.nr_map; i++) {
		unsigned long curr_pfn, last_pfn, size;
 		/*
		 * Reserve usable low memory
		 */
		if (e820.map[i].type != E820_RAM)
			continue;
		/*
		 * We are rounding up the start address of usable memory:
		 */
		curr_pfn = PFN_UP(e820.map[i].addr);
		if (curr_pfn >= max_low_pfn)
			continue;
		/*
		 * ... and at the end of the usable range downwards:
		 */
		last_pfn = PFN_DOWN(e820.map[i].addr + e820.map[i].size);

		if (last_pfn > max_low_pfn)
			last_pfn = max_low_pfn;

		/*
		 * .. finally, did all the rounding and playing
		 * around just make the area go away?
		 */
		if (last_pfn <= curr_pfn)
			continue;

		size = last_pfn - curr_pfn;
		free_bootmem(PFN_PHYS(curr_pfn), PFN_PHYS(size));
	}
	/*
	 * Reserve the bootmem bitmap itself as well. We do this in two
	 * steps (first step was init_bootmem()) because this catches
	 * the (very unlikely) case of us accidentally initializing the
	 * bootmem allocator with an invalid RAM area.
	 */
	reserve_bootmem(HIGH_MEMORY, (PFN_PHYS(start_pfn) +
			 bootmap_size + PAGE_SIZE-1) - (HIGH_MEMORY));

	/*
	 * reserve physical page 0 - it's a special BIOS page on many boxes,
	 * enabling clean reboots, SMP operation, laptop functions.
	 */
	reserve_bootmem(0, PAGE_SIZE);

#ifdef CONFIG_SMP
	/*
	 * But first pinch a few for the stack/trampoline stuff
	 * FIXME: Don't need the extra page at 4K, but need to fix
	 * trampoline before removing it. (see the GDT stuff)
	 */
	reserve_bootmem(PAGE_SIZE, PAGE_SIZE);
	smp_alloc_memory(); /* AP processor realmode stacks in low memory*/
#endif

#ifdef CONFIG_X86_IO_APIC
	/*
	 * Find and reserve possible boot-time SMP configuration:
	 */
	find_smp_config();
#endif
	paging_init();
#ifdef CONFIG_X86_IO_APIC
	/*
	 * get boot-time SMP configuration:
	 */
	if (smp_found_config)
		get_smp_config();
#endif
#ifdef CONFIG_X86_LOCAL_APIC
	init_apic_mappings();
#endif

#ifdef CONFIG_BLK_DEV_INITRD
	if (LOADER_TYPE && INITRD_START) {
		if (INITRD_START + INITRD_SIZE <= (max_low_pfn << PAGE_SHIFT)) {
			reserve_bootmem(INITRD_START, INITRD_SIZE);
			initrd_start =
				INITRD_START ? INITRD_START + PAGE_OFFSET : 0;
			initrd_end = initrd_start+INITRD_SIZE;
		}
		else {
			printk(KERN_ERR "initrd extends beyond end of memory "
			    "(0x%08lx > 0x%08lx)\ndisabling initrd\n",
			    INITRD_START + INITRD_SIZE,
			    max_low_pfn << PAGE_SHIFT);
			initrd_start = 0;
		}
	}
#endif

	/*
	 * Request address space for all standard RAM and ROM resources
	 * and also for regions reported as reserved by the e820.
	 */
	probe_roms();
	for (i = 0; i < e820.nr_map; i++) {
		struct resource *res;
		if (e820.map[i].addr + e820.map[i].size > 0x100000000ULL)
			continue;
		res = alloc_bootmem_low(sizeof(struct resource));
		switch (e820.map[i].type) {
		case E820_RAM:	res->name = "System RAM"; break;
		case E820_ACPI:	res->name = "ACPI Tables"; break;
		case E820_NVS:	res->name = "ACPI Non-volatile Storage"; break;
		default:	res->name = "reserved";
		}
		res->start = e820.map[i].addr;
		res->end = res->start + e820.map[i].size - 1;
		res->flags = IORESOURCE_MEM | IORESOURCE_BUSY;
		request_resource(&iomem_resource, res);
		if (e820.map[i].type == E820_RAM) {
			/*
			 *  We dont't know which RAM region contains kernel data,
			 *  so we try it repeatedly and let the resource manager
			 *  test it.
			 */
			request_resource(res, &code_resource);
			request_resource(res, &data_resource);
		}
	}
	request_resource(&iomem_resource, &vram_resource);

	/* request I/O space for devices used on all i[345]86 PCs */
	for (i = 0; i < STANDARD_IO_RESOURCES; i++)
		request_resource(&ioport_resource, standard_io_resources+i);

	/* Tell the PCI layer not to allocate too close to the RAM area.. */
	low_mem_size = ((max_low_pfn << PAGE_SHIFT) + 0xfffff) & ~0xfffff;
	if (low_mem_size > pci_mem_start)
		pci_mem_start = low_mem_size;

#ifdef CONFIG_VT
#if defined(CONFIG_VGA_CONSOLE)
	conswitchp = &vga_con;
#elif defined(CONFIG_DUMMY_CONSOLE)
	conswitchp = &dummy_con;
#endif
#endif
}

#ifndef CONFIG_X86_TSC
static int tsc_disable __initdata = 0;

static int __init tsc_setup(char *str)
{
	tsc_disable = 1;
	return 1;
}

__setup("notsc", tsc_setup);
#endif

static int __init get_model_name(struct cpuinfo_x86 *c)
{
	unsigned int *v;
	char *p, *q;

	if (cpuid_eax(0x80000000) < 0x80000004)
		return 0;

	v = (unsigned int *) c->x86_model_id;
	cpuid(0x80000002, &v[0], &v[1], &v[2], &v[3]);
	cpuid(0x80000003, &v[4], &v[5], &v[6], &v[7]);
	cpuid(0x80000004, &v[8], &v[9], &v[10], &v[11]);
	c->x86_model_id[48] = 0;

	/* Intel chips right-justify this string for some dumb reason;
	   undo that brain damage */
	p = q = &c->x86_model_id[0];
	while ( *p == ' ' )
	     p++;
	if ( p != q ) {
	     while ( *p )
		  *q++ = *p++;
	     while ( q <= &c->x86_model_id[48] )
		  *q++ = '\0';	/* Zero-pad the rest */
	}

	return 1;
}


static void __init display_cacheinfo(struct cpuinfo_x86 *c)
{
	unsigned int n, dummy, ecx, edx, l2size;

	n = cpuid_eax(0x80000000);

	if (n >= 0x80000005) {
		cpuid(0x80000005, &dummy, &dummy, &ecx, &edx);
		printk(KERN_INFO "CPU: L1 I Cache: %dK (%d bytes/line), D cache %dK (%d bytes/line)\n",
			edx>>24, edx&0xFF, ecx>>24, ecx&0xFF);
		c->x86_cache_size=(ecx>>24)+(edx>>24);	
	}

	if (n < 0x80000006)	/* Some chips just has a large L1. */
		return;

	ecx = cpuid_ecx(0x80000006);
	l2size = ecx >> 16;

	/* AMD errata T13 (order #21922) */
	if (c->x86_vendor == X86_VENDOR_AMD &&
	    c->x86 == 6 &&
	    c->x86_model == 3 &&
	    c->x86_mask == 0) {
		l2size = 64;
	}

	if ( l2size == 0 )
		return;		/* Again, no L2 cache is possible */

	c->x86_cache_size = l2size;

	printk(KERN_INFO "CPU: L2 Cache: %dK (%d bytes/line)\n",
	       l2size, ecx & 0xFF);
}

/*
 *	B step AMD K6 before B 9730xxxx have hardware bugs that can cause
 *	misexecution of code under Linux. Owners of such processors should
 *	contact AMD for precise details and a CPU swap.
 *
 *	See	http://www.mygale.com/~poulot/k6bug.html
 *		http://www.amd.com/K6/k6docs/revgd.html
 *
 *	The following test is erm.. interesting. AMD neglected to up
 *	the chip setting when fixing the bug but they also tweaked some
 *	performance at the same time..
 */
 
extern void vide(void);
__asm__(".align 4\nvide: ret");

static int __init init_amd(struct cpuinfo_x86 *c)
{
	u32 l, h;
	int mbytes = max_mapnr >> (20-PAGE_SHIFT);
	int r;

	/* Bit 31 in normal CPUID used for nonstandard 3DNow ID;
	   3DNow is IDd by bit 31 in extended CPUID (1*32+31) anyway */
	clear_bit(0*32+31, &c->x86_capability);
	
	r = get_model_name(c);

	switch(c->x86)
	{
		case 5:
			if( c->x86_model < 6 )
			{
				/* Based on AMD doc 20734R - June 2000 */
				if ( c->x86_model == 0 ) {
					clear_bit(X86_FEATURE_APIC, &c->x86_capability);
					set_bit(X86_FEATURE_PGE, &c->x86_capability);
				}
				break;
			}
			
			if ( c->x86_model == 6 && c->x86_mask == 1 ) {
				const int K6_BUG_LOOP = 1000000;
				int n;
				void (*f_vide)(void);
				unsigned long d, d2;
				
				printk(KERN_INFO "AMD K6 stepping B detected - ");
				
				/*
				 * It looks like AMD fixed the 2.6.2 bug and improved indirect 
				 * calls at the same time.
				 */

				n = K6_BUG_LOOP;
				f_vide = vide;
				rdtscl(d);
				while (n--) 
					f_vide();
				rdtscl(d2);
				d = d2-d;
				
				/* Knock these two lines out if it debugs out ok */
				printk(KERN_INFO "K6 BUG %ld %d (Report these if test report is incorrect)\n", d, 20*K6_BUG_LOOP);
				printk(KERN_INFO "AMD K6 stepping B detected - ");
				/* -- cut here -- */
				if (d > 20*K6_BUG_LOOP) 
					printk("system stability may be impaired when more than 32 MB are used.\n");
				else 
					printk("probably OK (after B9730xxxx).\n");
				printk(KERN_INFO "Please see http://www.mygale.com/~poulot/k6bug.html\n");
			}

			/* K6 with old style WHCR */
			if( c->x86_model < 8 ||
				(c->x86_model== 8 && c->x86_mask < 8))
			{
				/* We can only write allocate on the low 508Mb */
				if(mbytes>508)
					mbytes=508;
					
				rdmsr(0xC0000082, l, h);
				if ((l&0x0000FFFF)==0) {
					unsigned long flags;
					l=(1<<0)|((mbytes/4)<<1);
					local_irq_save(flags);
					__asm__ __volatile__ ("wbinvd": : :"memory");
					wrmsr(0xC0000082, l, h);
					local_irq_restore(flags);
					printk(KERN_INFO "Enabling old style K6 write allocation for %d Mb\n",
						mbytes);
					
				}
				break;
			}
			if (c->x86_model == 8 || c->x86_model == 9 || c->x86_model == 13)
			{
				/* The more serious chips .. */
				
				if(mbytes>4092)
					mbytes=4092;

				rdmsr(0xC0000082, l, h);
				if ((l&0xFFFF0000)==0) {
					unsigned long flags;
					l=((mbytes>>2)<<22)|(1<<16);
					local_irq_save(flags);
					__asm__ __volatile__ ("wbinvd": : :"memory");
					wrmsr(0xC0000082, l, h);
					local_irq_restore(flags);
					printk(KERN_INFO "Enabling new style K6 write allocation for %d Mb\n",
						mbytes);
				}

				/*  Set MTRR capability flag if appropriate */
				if ( (c->x86_model == 13) ||
				     (c->x86_model == 9) ||
				     ((c->x86_model == 8) && 
				     (c->x86_mask >= 8)) )
					set_bit(X86_FEATURE_K6_MTRR, &c->x86_capability);
				break;
			}

			break;

		case 6:	/* An Athlon/Duron. We can trust the BIOS probably */
			break;		
	}

	display_cacheinfo(c);
	return r;
}

/*
 * Read Cyrix DEVID registers (DIR) to get more detailed info. about the CPU
 */
static void do_cyrix_devid(unsigned char *dir0, unsigned char *dir1)
{
	unsigned char ccr2, ccr3;
	unsigned long flags;

	/* we test for DEVID by checking whether CCR3 is writable */
	local_irq_save(flags);
	ccr3 = getCx86(CX86_CCR3);
	setCx86(CX86_CCR3, ccr3 ^ 0x80);
	getCx86(0xc0);   /* dummy to change bus */

	if (getCx86(CX86_CCR3) == ccr3) {       /* no DEVID regs. */
		ccr2 = getCx86(CX86_CCR2);
		setCx86(CX86_CCR2, ccr2 ^ 0x04);
		getCx86(0xc0);  /* dummy */

		if (getCx86(CX86_CCR2) == ccr2) /* old Cx486SLC/DLC */
			*dir0 = 0xfd;
		else {                          /* Cx486S A step */
			setCx86(CX86_CCR2, ccr2);
			*dir0 = 0xfe;
		}
	}
	else {
		setCx86(CX86_CCR3, ccr3);  /* restore CCR3 */

		/* read DIR0 and DIR1 CPU registers */
		*dir0 = getCx86(CX86_DIR0);
		*dir1 = getCx86(CX86_DIR1);
	}
	local_irq_restore(flags);
}

/*
 * Cx86_dir0_msb is a HACK needed by check_cx686_cpuid/slop in bugs.h in
 * order to identify the Cyrix CPU model after we're out of setup.c
 *
 * Actually since bugs.h doesnt even reference this perhaps someone should
 * fix the documentation ???
 */
unsigned char Cx86_dir0_msb __initdata = 0;

static char Cx86_model[][9] __initdata = {
	"Cx486", "Cx486", "5x86 ", "6x86", "MediaGX ", "6x86MX ",
	"M II ", "Unknown"
};
static char Cx486_name[][5] __initdata = {
	"SLC", "DLC", "SLC2", "DLC2", "SRx", "DRx",
	"SRx2", "DRx2"
};
static char Cx486S_name[][4] __initdata = {
	"S", "S2", "Se", "S2e"
};
static char Cx486D_name[][4] __initdata = {
	"DX", "DX2", "?", "?", "?", "DX4"
};
static char Cx86_cb[] __initdata = "?.5x Core/Bus Clock";
static char cyrix_model_mult1[] __initdata = "12??43";
static char cyrix_model_mult2[] __initdata = "12233445";

/*
 * Reset the slow-loop (SLOP) bit on the 686(L) which is set by some old
 * BIOSes for compatability with DOS games.  This makes the udelay loop
 * work correctly, and improves performance.
 *
 * FIXME: our newer udelay uses the tsc. We dont need to frob with SLOP
 */

extern void calibrate_delay(void) __init;

static void __init check_cx686_slop(struct cpuinfo_x86 *c)
{
	if (Cx86_dir0_msb == 3) {
		unsigned char ccr3, ccr5;
		unsigned long flags;

		local_irq_save(flags);
		ccr3 = getCx86(CX86_CCR3);
		setCx86(CX86_CCR3, (ccr3 & 0x0f) | 0x10); /* enable MAPEN  */
		ccr5 = getCx86(CX86_CCR5);
		if (ccr5 & 2)
			setCx86(CX86_CCR5, ccr5 & 0xfd);  /* reset SLOP */
		setCx86(CX86_CCR3, ccr3);                 /* disable MAPEN */
		local_irq_restore(flags);

		if (ccr5 & 2) { /* possible wrong calibration done */
			printk(KERN_INFO "Recalibrating delay loop with SLOP bit reset\n");
			calibrate_delay();
			c->loops_per_jiffy = loops_per_jiffy;
		}
	}
}

static void __init init_cyrix(struct cpuinfo_x86 *c)
{
	unsigned char dir0, dir0_msn, dir0_lsn, dir1 = 0;
	char *buf = c->x86_model_id;
	const char *p = NULL;

	/* Bit 31 in normal CPUID used for nonstandard 3DNow ID;
	   3DNow is IDd by bit 31 in extended CPUID (1*32+31) anyway */
	clear_bit(0*32+31, &c->x86_capability);

	/* Cyrix used bit 24 in extended (AMD) CPUID for Cyrix MMX extensions */
	if ( test_bit(1*32+24, &c->x86_capability) ) {
		clear_bit(1*32+24, &c->x86_capability);
		set_bit(X86_FEATURE_CXMMX, &c->x86_capability);
	}

	do_cyrix_devid(&dir0, &dir1);

	check_cx686_slop(c);

	Cx86_dir0_msb = dir0_msn = dir0 >> 4; /* identifies CPU "family"   */
	dir0_lsn = dir0 & 0xf;                /* model or clock multiplier */

	/* common case step number/rev -- exceptions handled below */
	c->x86_model = (dir1 >> 4) + 1;
	c->x86_mask = dir1 & 0xf;

	/* Now cook; the original recipe is by Channing Corn, from Cyrix.
	 * We do the same thing for each generation: we work out
	 * the model, multiplier and stepping.  Black magic included,
	 * to make the silicon step/rev numbers match the printed ones.
	 */
	 
	switch (dir0_msn) {
		unsigned char tmp;

	case 0: /* Cx486SLC/DLC/SRx/DRx */
		p = Cx486_name[dir0_lsn & 7];
		break;

	case 1: /* Cx486S/DX/DX2/DX4 */
		p = (dir0_lsn & 8) ? Cx486D_name[dir0_lsn & 5]
			: Cx486S_name[dir0_lsn & 3];
		break;

	case 2: /* 5x86 */
		Cx86_cb[2] = cyrix_model_mult1[dir0_lsn & 5];
		p = Cx86_cb+2;
		break;

	case 3: /* 6x86/6x86L */
		Cx86_cb[1] = ' ';
		Cx86_cb[2] = cyrix_model_mult1[dir0_lsn & 5];
		if (dir1 > 0x21) { /* 686L */
			Cx86_cb[0] = 'L';
			p = Cx86_cb;
			(c->x86_model)++;
		} else             /* 686 */
			p = Cx86_cb+1;
		/* Emulate MTRRs using Cyrix's ARRs. */
		set_bit(X86_FEATURE_CYRIX_ARR, &c->x86_capability);
		/* 6x86's contain this bug */
		c->coma_bug = 1;
		break;

	case 4: /* MediaGX/GXm */
		/*
		 *	Life sometimes gets weiiiiiiiird if we use this
		 *	on the MediaGX. So we turn it off for now. 
		 */
		
#ifdef CONFIG_PCI
		/* It isnt really a PCI quirk directly, but the cure is the
		   same. The MediaGX has deep magic SMM stuff that handles the
		   SB emulation. It thows away the fifo on disable_dma() which
		   is wrong and ruins the audio. 
                   
		   Bug2: VSA1 has a wrap bug so that using maximum sized DMA 
		   causes bad things. According to NatSemi VSA2 has another
		   bug to do with 'hlt'. I've not seen any boards using VSA2
		   and X doesn't seem to support it either so who cares 8).
		   VSA1 we work around however.
		*/

		printk(KERN_INFO "Working around Cyrix MediaGX virtual DMA bugs.\n");
		isa_dma_bridge_buggy = 2;
#endif		
		c->x86_cache_size=16;	/* Yep 16K integrated cache thats it */

		/* GXm supports extended cpuid levels 'ala' AMD */
		if (c->cpuid_level == 2) {
			get_model_name(c);  /* get CPU marketing name */
			clear_bit(X86_FEATURE_TSC, c->x86_capability);
			return;
		}
		else {  /* MediaGX */
			Cx86_cb[2] = (dir0_lsn & 1) ? '3' : '4';
			p = Cx86_cb+2;
			c->x86_model = (dir1 & 0x20) ? 1 : 2;
			clear_bit(X86_FEATURE_TSC, &c->x86_capability);
		}
		break;

        case 5: /* 6x86MX/M II */
		if (dir1 > 7)
		{
			dir0_msn++;  /* M II */
			/* Enable MMX extensions (App note 108) */
			setCx86(CX86_CCR7, getCx86(CX86_CCR7)|1);
		}
		else
		{
			c->coma_bug = 1;      /* 6x86MX, it has the bug. */
		}
		tmp = (!(dir0_lsn & 7) || dir0_lsn & 1) ? 2 : 0;
		Cx86_cb[tmp] = cyrix_model_mult2[dir0_lsn & 7];
		p = Cx86_cb+tmp;
        	if (((dir1 & 0x0f) > 4) || ((dir1 & 0xf0) == 0x20))
			(c->x86_model)++;
		/* Emulate MTRRs using Cyrix's ARRs. */
		set_bit(X86_FEATURE_CYRIX_ARR, &c->x86_capability);
		break;

	case 0xf:  /* Cyrix 486 without DEVID registers */
		switch (dir0_lsn) {
		case 0xd:  /* either a 486SLC or DLC w/o DEVID */
			dir0_msn = 0;
			p = Cx486_name[(c->hard_math) ? 1 : 0];
			break;

		case 0xe:  /* a 486S A step */
			dir0_msn = 0;
			p = Cx486S_name[0];
			break;
		}
		break;

	default:  /* unknown (shouldn't happen, we know everyone ;-) */
		dir0_msn = 7;
		break;
	}
	strcpy(buf, Cx86_model[dir0_msn & 7]);
	if (p) strcat(buf, p);
	return;
}

static void __init init_centaur(struct cpuinfo_x86 *c)
{
	enum {
		ECX8=1<<1,
		EIERRINT=1<<2,
		DPM=1<<3,
		DMCE=1<<4,
		DSTPCLK=1<<5,
		ELINEAR=1<<6,
		DSMC=1<<7,
		DTLOCK=1<<8,
		EDCTLB=1<<8,
		EMMX=1<<9,
		DPDC=1<<11,
		EBRPRED=1<<12,
		DIC=1<<13,
		DDC=1<<14,
		DNA=1<<15,
		ERETSTK=1<<16,
		E2MMX=1<<19,
		EAMD3D=1<<20,
	};

	char *name;
	u32  fcr_set=0;
	u32  fcr_clr=0;
	u32  lo,hi,newlo;
	u32  aa,bb,cc,dd;

	/* Bit 31 in normal CPUID used for nonstandard 3DNow ID;
	   3DNow is IDd by bit 31 in extended CPUID (1*32+31) anyway */
	clear_bit(0*32+31, &c->x86_capability);

	switch (c->x86) {

		case 5:
			switch(c->x86_model) {
			case 4:
				name="C6";
				fcr_set=ECX8|DSMC|EDCTLB|EMMX|ERETSTK;
				fcr_clr=DPDC;
				printk(KERN_NOTICE "Disabling bugged TSC.\n");
				clear_bit(X86_FEATURE_TSC, &c->x86_capability);
				break;
			case 8:
				switch(c->x86_mask) {
				default:
					name="2";
					break;
				case 7 ... 9:
					name="2A";
					break;
				case 10 ... 15:
					name="2B";
					break;
				}
				fcr_set=ECX8|DSMC|DTLOCK|EMMX|EBRPRED|ERETSTK|E2MMX|EAMD3D;
				fcr_clr=DPDC;
				break;
			case 9:
				name="3";
				fcr_set=ECX8|DSMC|DTLOCK|EMMX|EBRPRED|ERETSTK|E2MMX|EAMD3D;
				fcr_clr=DPDC;
				break;
			case 10:
				name="4";
				/* no info on the WC4 yet */
				break;
			default:
				name="??";
			}

			/* get FCR  */
			rdmsr(0x107, lo, hi);

			newlo=(lo|fcr_set) & (~fcr_clr);

			if (newlo!=lo) {
				printk(KERN_INFO "Centaur FCR was 0x%X now 0x%X\n", lo, newlo );
				wrmsr(0x107, newlo, hi );
			} else {
				printk(KERN_INFO "Centaur FCR is 0x%X\n",lo);
			}
			/* Emulate MTRRs using Centaur's MCR. */
			set_bit(X86_FEATURE_CENTAUR_MCR, &c->x86_capability);
			/* Report CX8 */
			set_bit(X86_FEATURE_CX8, &c->x86_capability);
			/* Set 3DNow! on Winchip 2 and above. */
			if (c->x86_model >=8)
				set_bit(X86_FEATURE_3DNOW, &c->x86_capability);
			/* See if we can find out some more. */
			if ( cpuid_eax(0x80000000) >= 0x80000005 ) {
				/* Yes, we can. */
				cpuid(0x80000005,&aa,&bb,&cc,&dd);
				/* Add L1 data and code cache sizes. */
				c->x86_cache_size = (cc>>24)+(dd>>24);
			}
			sprintf( c->x86_model_id, "WinChip %s", name );
			break;

		case 6:
			switch (c->x86_model) {
				case 6 ... 7:		/* Cyrix III or C3 */
					rdmsr (0x1107, lo, hi);
					lo |= (1<<1 | 1<<7);	/* Report CX8 & enable PGE */
					wrmsr (0x1107, lo, hi);

					set_bit(X86_FEATURE_CX8, &c->x86_capability);
					set_bit(X86_FEATURE_3DNOW, &c->x86_capability);

					get_model_name(c);
					display_cacheinfo(c);
					break;
			}
			break;
	}

}


static void __init init_transmeta(struct cpuinfo_x86 *c)
{
	unsigned int cap_mask, uk, max, dummy;
	unsigned int cms_rev1, cms_rev2;
	unsigned int cpu_rev, cpu_freq, cpu_flags;
	char cpu_info[65];

	get_model_name(c);	/* Same as AMD/Cyrix */
	display_cacheinfo(c);

	/* Print CMS and CPU revision */
	max = cpuid_eax(0x80860000);
	if ( max >= 0x80860001 ) {
		cpuid(0x80860001, &dummy, &cpu_rev, &cpu_freq, &cpu_flags); 
		printk(KERN_INFO "CPU: Processor revision %u.%u.%u.%u, %u MHz\n",
		       (cpu_rev >> 24) & 0xff,
		       (cpu_rev >> 16) & 0xff,
		       (cpu_rev >> 8) & 0xff,
		       cpu_rev & 0xff,
		       cpu_freq);
	}
	if ( max >= 0x80860002 ) {
		cpuid(0x80860002, &dummy, &cms_rev1, &cms_rev2, &dummy);
		printk(KERN_INFO "CPU: Code Morphing Software revision %u.%u.%u-%u-%u\n",
		       (cms_rev1 >> 24) & 0xff,
		       (cms_rev1 >> 16) & 0xff,
		       (cms_rev1 >> 8) & 0xff,
		       cms_rev1 & 0xff,
		       cms_rev2);
	}
	if ( max >= 0x80860006 ) {
		cpuid(0x80860003,
		      (void *)&cpu_info[0],
		      (void *)&cpu_info[4],
		      (void *)&cpu_info[8],
		      (void *)&cpu_info[12]);
		cpuid(0x80860004,
		      (void *)&cpu_info[16],
		      (void *)&cpu_info[20],
		      (void *)&cpu_info[24],
		      (void *)&cpu_info[28]);
		cpuid(0x80860005,
		      (void *)&cpu_info[32],
		      (void *)&cpu_info[36],
		      (void *)&cpu_info[40],
		      (void *)&cpu_info[44]);
		cpuid(0x80860006,
		      (void *)&cpu_info[48],
		      (void *)&cpu_info[52],
		      (void *)&cpu_info[56],
		      (void *)&cpu_info[60]);
		cpu_info[64] = '\0';
		printk(KERN_INFO "CPU: %s\n", cpu_info);
	}

	/* Unhide possibly hidden capability flags */
	rdmsr(0x80860004, cap_mask, uk);
	wrmsr(0x80860004, ~0, uk);
	c->x86_capability[0] = cpuid_edx(0x00000001);
	wrmsr(0x80860004, cap_mask, uk);
}


static void __init init_rise(struct cpuinfo_x86 *c)
{
	printk("CPU: Rise iDragon");
	if (c->x86_model > 2)
		printk(" II");
	printk("\n");
	printk("If you have one of these please email davej@suse.de\n");

	/* Unhide possibly hidden capability flags
	   The mp6 iDragon family don't have MSRs.
	   We switch on extra features with this cpuid weirdness: */
	__asm__ (
		"movl $0x6363452a, %%eax\n\t"
		"movl $0x3231206c, %%ecx\n\t"
		"movl $0x2a32313a, %%edx\n\t"
		"cpuid\n\t"
		"movl $0x63634523, %%eax\n\t"
		"movl $0x32315f6c, %%ecx\n\t"
		"movl $0x2333313a, %%edx\n\t"
		"cpuid\n\t" : : : "eax", "ebx", "ecx", "edx"
	);
	set_bit(X86_FEATURE_CX8, &c->x86_capability);
}


extern void trap_init_f00f_bug(void);

static void __init init_intel(struct cpuinfo_x86 *c)
{
#ifndef CONFIG_M686
	static int f00f_workaround_enabled = 0;
#endif
	extern void mcheck_init(struct cpuinfo_x86 *c);
	char *p = NULL;
	unsigned int l1i = 0, l1d = 0, l2 = 0, l3 = 0; /* Cache sizes */

#ifndef CONFIG_M686
	/*
	 * All current models of Pentium and Pentium with MMX technology CPUs
	 * have the F0 0F bug, which lets nonpriviledged users lock up the system.
	 * Note that the workaround only should be initialized once...
	 */
	c->f00f_bug = 0;
	if ( c->x86 == 5 ) {
		c->f00f_bug = 1;
		if ( !f00f_workaround_enabled ) {
			trap_init_f00f_bug();
			printk(KERN_NOTICE "Intel Pentium with F0 0F bug - workaround enabled.\n");
			f00f_workaround_enabled = 1;
		}
	}
#endif


	if (c->cpuid_level > 1) {
		/* supports eax=2  call */
		int i, j, n;
		int regs[4];
		unsigned char *dp = (unsigned char *)regs;

		/* Number of times to iterate */
		n = cpuid_eax(2) & 0xFF;

		for ( i = 0 ; i < n ; i++ ) {
			cpuid(2, &regs[0], &regs[1], &regs[2], &regs[3]);
			
			/* If bit 31 is set, this is an unknown format */
			for ( j = 0 ; j < 3 ; j++ ) {
				if ( regs[j] < 0 ) regs[j] = 0;
			}

			/* Byte 0 is level count, not a descriptor */
			for ( j = 1 ; j < 16 ; j++ ) {
				unsigned char des = dp[j];
				unsigned char dl, dh;
				unsigned int cs;

				dh = des >> 4;
				dl = des & 0x0F;

				/* Black magic... */

				switch ( dh )
				{
				case 0:
					switch ( dl ) {
					case 6:
						/* L1 I cache */
						l1i += 8;
						break;
					case 8:
						/* L1 I cache */
						l1i += 16;
						break;
					case 10:
						/* L1 D cache */
						l1d += 8;
						break;
					case 12:
						/* L1 D cache */
						l1d += 16;
						break;
					default:;
						/* TLB, or unknown */
					}
					break;
				case 2:
					if ( dl ) {
						/* L3 cache */
						cs = (dl-1) << 9;
						l3 += cs;
					}
					break;
				case 4:
					if ( c->x86 > 6 && dl ) {
						/* P4 family */
						/* L3 cache */
						cs = 128 << (dl-1);
						l3 += cs;
						break;
					}
					/* else same as 8 - fall through */
				case 8:
					if ( dl ) {
						/* L2 cache */
						cs = 128 << (dl-1);
						l2 += cs;
					}
					break;
				case 6:
					if (dl > 5) {
						/* L1 D cache */
						cs = 8<<(dl-6);
						l1d += cs;
					}
					break;
				case 7:
					if ( dl >= 8 ) 
					{
						/* L2 cache */
						cs = 64<<(dl-8);
						l2 += cs;
					} else {
						/* L0 I cache, count as L1 */
						cs = dl ? (16 << (dl-1)) : 12;
						l1i += cs;
					}
					break;
				default:
					/* TLB, or something else we don't know about */
					break;
				}
			}
		}
		if ( l1i || l1d )
			printk(KERN_INFO "CPU: L1 I cache: %dK, L1 D cache: %dK\n",
			       l1i, l1d);
		if ( l2 )
			printk(KERN_INFO "CPU: L2 cache: %dK\n", l2);
		if ( l3 )
			printk(KERN_INFO "CPU: L3 cache: %dK\n", l3);

		/*
		 * This assumes the L3 cache is shared; it typically lives in
		 * the northbridge.  The L1 caches are included by the L2
		 * cache, and so should not be included for the purpose of
		 * SMP switching weights.
		 */
		c->x86_cache_size = l2 ? l2 : (l1i+l1d);
	}

	/* SEP CPUID bug: Pentium Pro reports SEP but doesn't have it */
	if ( c->x86 == 6 && c->x86_model < 3 && c->x86_mask < 3 )
		clear_bit(X86_FEATURE_SEP, &c->x86_capability);
	
	/* Names for the Pentium II/Celeron processors 
	   detectable only by also checking the cache size.
	   Dixon is NOT a Celeron. */
	if (c->x86 == 6) {
		switch (c->x86_model) {
		case 5:
			if (l2 == 0)
				p = "Celeron (Covington)";
			if (l2 == 256)
				p = "Mobile Pentium II (Dixon)";
			break;
			
		case 6:
			if (l2 == 128)
				p = "Celeron (Mendocino)";
			break;
			
		case 8:
			if (l2 == 128)
				p = "Celeron (Coppermine)";
			break;
		}
	}

	if ( p )
		strcpy(c->x86_model_id, p);

	/* Enable MCA if available */
	mcheck_init(c);
}

void __init get_cpu_vendor(struct cpuinfo_x86 *c)
{
	char *v = c->x86_vendor_id;

	if (!strcmp(v, "GenuineIntel"))
		c->x86_vendor = X86_VENDOR_INTEL;
	else if (!strcmp(v, "AuthenticAMD"))
		c->x86_vendor = X86_VENDOR_AMD;
	else if (!strcmp(v, "CyrixInstead"))
		c->x86_vendor = X86_VENDOR_CYRIX;
	else if (!strcmp(v, "UMC UMC UMC "))
		c->x86_vendor = X86_VENDOR_UMC;
	else if (!strcmp(v, "CentaurHauls"))
		c->x86_vendor = X86_VENDOR_CENTAUR;
	else if (!strcmp(v, "NexGenDriven"))
		c->x86_vendor = X86_VENDOR_NEXGEN;
	else if (!strcmp(v, "RiseRiseRise"))
		c->x86_vendor = X86_VENDOR_RISE;
	else if (!strcmp(v, "GenuineTMx86") ||
		 !strcmp(v, "TransmetaCPU"))
		c->x86_vendor = X86_VENDOR_TRANSMETA;
	else
		c->x86_vendor = X86_VENDOR_UNKNOWN;
}

struct cpu_model_info {
	int vendor;
	int family;
	char *model_names[16];
};

/* Naming convention should be: <Name> [(<Codename>)] */
/* This table only is used unless init_<vendor>() below doesn't set it; */
/* in particular, if CPUID levels 0x80000002..4 are supported, this isn't used */
static struct cpu_model_info cpu_models[] __initdata = {
	{ X86_VENDOR_INTEL,	4,
	  { "486 DX-25/33", "486 DX-50", "486 SX", "486 DX/2", "486 SL", 
	    "486 SX/2", NULL, "486 DX/2-WB", "486 DX/4", "486 DX/4-WB", NULL, 
	    NULL, NULL, NULL, NULL, NULL }},
	{ X86_VENDOR_INTEL,	5,
	  { "Pentium 60/66 A-step", "Pentium 60/66", "Pentium 75 - 200",
	    "OverDrive PODP5V83", "Pentium MMX", NULL, NULL,
	    "Mobile Pentium 75 - 200", "Mobile Pentium MMX", NULL, NULL, NULL,
	    NULL, NULL, NULL, NULL }},
	{ X86_VENDOR_INTEL,	6,
	  { "Pentium Pro A-step", "Pentium Pro", NULL, "Pentium II (Klamath)", 
	    NULL, "Pentium II (Deschutes)", "Mobile Pentium II",
	    "Pentium III (Katmai)", "Pentium III (Coppermine)", NULL,
	    "Pentium III (Cascades)", NULL, NULL, NULL, NULL }},
	{ X86_VENDOR_AMD,	4,
	  { NULL, NULL, NULL, "486 DX/2", NULL, NULL, NULL, "486 DX/2-WB",
	    "486 DX/4", "486 DX/4-WB", NULL, NULL, NULL, NULL, "Am5x86-WT",
	    "Am5x86-WB" }},
	{ X86_VENDOR_AMD,	5, /* Is this this really necessary?? */
	  { "K5/SSA5", "K5",
	    "K5", "K5", NULL, NULL,
	    "K6", "K6", "K6-2",
	    "K6-3", NULL, NULL, NULL, NULL, NULL, NULL }},
	{ X86_VENDOR_AMD,	6, /* Is this this really necessary?? */
	  { "Athlon", "Athlon",
	    "Athlon", NULL, "Athlon", NULL,
	    NULL, NULL, NULL,
	    NULL, NULL, NULL, NULL, NULL, NULL, NULL }},
	{ X86_VENDOR_UMC,	4,
	  { NULL, "U5D", "U5S", NULL, NULL, NULL, NULL, NULL, NULL, NULL,
	    NULL, NULL, NULL, NULL, NULL, NULL }},
	{ X86_VENDOR_NEXGEN,	5,
	  { "Nx586", NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
	    NULL, NULL, NULL, NULL, NULL, NULL, NULL }},
	{ X86_VENDOR_RISE,	5,
	  { "iDragon", NULL, "iDragon", NULL, NULL, NULL, NULL,
	    NULL, "iDragon II", "iDragon II", NULL, NULL, NULL, NULL, NULL, NULL }},
};

/* Look up CPU names by table lookup. */
static char __init *table_lookup_model(struct cpuinfo_x86 *c)
{
	struct cpu_model_info *info = cpu_models;
	int i;

	if ( c->x86_model >= 16 )
		return NULL;	/* Range check */

	for ( i = 0 ; i < sizeof(cpu_models)/sizeof(struct cpu_model_info) ; i++ ) {
		if ( info->vendor == c->x86_vendor &&
		     info->family == c->x86 ) {
			return info->model_names[c->x86_model];
		}
		info++;
	}
	return NULL;		/* Not found */
}

/*
 *	Detect a NexGen CPU running without BIOS hypercode new enough
 *	to have CPUID. (Thanks to Herbert Oppmann)
 */
 
static int __init deep_magic_nexgen_probe(void)
{
	int ret;
	
	__asm__ __volatile__ (
		"	movw	$0x5555, %%ax\n"
		"	xorw	%%dx,%%dx\n"
		"	movw	$2, %%cx\n"
		"	divw	%%cx\n"
		"	movl	$0, %%eax\n"
		"	jnz	1f\n"
		"	movl	$1, %%eax\n"
		"1:\n" 
		: "=a" (ret) : : "cx", "dx" );
	return  ret;
}

static void __init squash_the_stupid_serial_number(struct cpuinfo_x86 *c)
{
	if( test_bit(X86_FEATURE_PN, &c->x86_capability) &&
	    disable_x86_serial_nr ) {
		/* Disable processor serial number */
		unsigned long lo,hi;
		rdmsr(0x119,lo,hi);
		lo |= 0x200000;
		wrmsr(0x119,lo,hi);
		printk(KERN_NOTICE "CPU serial number disabled.\n");
		clear_bit(X86_FEATURE_PN, &c->x86_capability);

		/* Disabling the serial number may affect the cpuid level */
		c->cpuid_level = cpuid_eax(0);
	}
}


int __init x86_serial_nr_setup(char *s)
{
	disable_x86_serial_nr = 0;
	return 1;
}
__setup("serialnumber", x86_serial_nr_setup);

int __init x86_fxsr_setup(char * s)
{
	disable_x86_fxsr = 1;
	return 1;
}
__setup("nofxsr", x86_fxsr_setup);


/* Standard macro to see if a specific flag is changeable */
static inline int flag_is_changeable_p(u32 flag)
{
	u32 f1, f2;

	asm("pushfl\n\t"
	    "pushfl\n\t"
	    "popl %0\n\t"
	    "movl %0,%1\n\t"
	    "xorl %2,%0\n\t"
	    "pushl %0\n\t"
	    "popfl\n\t"
	    "pushfl\n\t"
	    "popl %0\n\t"
	    "popfl\n\t"
	    : "=&r" (f1), "=&r" (f2)
	    : "ir" (flag));

	return ((f1^f2) & flag) != 0;
}


/* Probe for the CPUID instruction */
static int __init have_cpuid_p(void)
{
	return flag_is_changeable_p(X86_EFLAGS_ID);
}

/*
 * Cyrix CPUs without cpuid or with cpuid not yet enabled can be detected
 * by the fact that they preserve the flags across the division of 5/2.
 * PII and PPro exhibit this behavior too, but they have cpuid available.
 */
 
/*
 * Perform the Cyrix 5/2 test. A Cyrix won't change
 * the flags, while other 486 chips will.
 */
static inline int test_cyrix_52div(void)
{
	unsigned int test;

	__asm__ __volatile__(
	     "sahf\n\t"		/* clear flags (%eax = 0x0005) */
	     "div %b2\n\t"	/* divide 5 by 2 */
	     "lahf"		/* store flags into %ah */
	     : "=a" (test)
	     : "0" (5), "q" (2)
	     : "cc");

	/* AH is 0x02 on Cyrix after the divide.. */
	return (unsigned char) (test >> 8) == 0x02;
}

/* Try to detect a CPU with disabled CPUID, and if so, enable.  This routine
   may also be used to detect non-CPUID processors and fill in some of
   the information manually. */
static int __init id_and_try_enable_cpuid(struct cpuinfo_x86 *c)
{
	/* First of all, decide if this is a 486 or higher */
	/* It's a 486 if we can modify the AC flag */
	if ( flag_is_changeable_p(X86_EFLAGS_AC) )
		c->x86 = 4;
	else
		c->x86 = 3;

	/* Detect Cyrix with disabled CPUID */
	if ( c->x86 == 4 && test_cyrix_52div() ) {
		unsigned char dir0, dir1;
		
		strcpy(c->x86_vendor_id, "CyrixInstead");
	        c->x86_vendor = X86_VENDOR_CYRIX;
	        
	        /* Actually enable cpuid on the older cyrix */
	    
	    	/* Retrieve CPU revisions */
	    	
		do_cyrix_devid(&dir0, &dir1);

		dir0>>=4;		
		
		/* Check it is an affected model */
		
   	        if (dir0 == 5 || dir0 == 3)
   	        {
			unsigned char ccr3, ccr4;
			unsigned long flags;

			printk(KERN_INFO "Enabling CPUID on Cyrix processor.\n");
			local_irq_save(flags);
			ccr3 = getCx86(CX86_CCR3);
			setCx86(CX86_CCR3, (ccr3 & 0x0f) | 0x10); /* enable MAPEN  */
			ccr4 = getCx86(CX86_CCR4);
			setCx86(CX86_CCR4, ccr4 | 0x80);          /* enable cpuid  */
			setCx86(CX86_CCR3, ccr3);                 /* disable MAPEN */
			local_irq_restore(flags);
		}
	} else

	/* Detect NexGen with old hypercode */
	if ( deep_magic_nexgen_probe() ) {
		strcpy(c->x86_vendor_id, "NexGenDriven");
	}

	return have_cpuid_p();	/* Check to see if CPUID now enabled? */
}

/*
 * This does the hard work of actually picking apart the CPU stuff...
 */
void __init identify_cpu(struct cpuinfo_x86 *c)
{
	int junk, i;
	u32 xlvl, tfms;

	c->loops_per_jiffy = loops_per_jiffy;
	c->x86_cache_size = -1;
	c->x86_vendor = X86_VENDOR_UNKNOWN;
	c->cpuid_level = -1;	/* CPUID not detected */
	c->x86_model = c->x86_mask = 0;	/* So far unknown... */
	c->x86_vendor_id[0] = '\0'; /* Unset */
	c->x86_model_id[0] = '\0';  /* Unset */
	memset(&c->x86_capability, 0, sizeof c->x86_capability);

	if ( !have_cpuid_p() && !id_and_try_enable_cpuid(c) ) {
		/* CPU doesn't have CPUID */

		/* If there are any capabilities, they're vendor-specific */
		/* enable_cpuid() would have set c->x86 for us. */
	} else {
		/* CPU does have CPUID */

		/* Get vendor name */
		cpuid(0x00000000, &c->cpuid_level,
		      (int *)&c->x86_vendor_id[0],
		      (int *)&c->x86_vendor_id[8],
		      (int *)&c->x86_vendor_id[4]);
		
		get_cpu_vendor(c);
		/* Initialize the standard set of capabilities */
		/* Note that the vendor-specific code below might override */

		/* Intel-defined flags: level 0x00000001 */
		if ( c->cpuid_level >= 0x00000001 ) {
			cpuid(0x00000001, &tfms, &junk, &junk,
			      &c->x86_capability[0]);
			c->x86 = (tfms >> 8) & 15;
			c->x86_model = (tfms >> 4) & 15;
			c->x86_mask = tfms & 15;
		} else {
			/* Have CPUID level 0 only - unheard of */
			c->x86 = 4;
		}

		/* AMD-defined flags: level 0x80000001 */
		xlvl = cpuid_eax(0x80000000);
		if ( (xlvl & 0xffff0000) == 0x80000000 ) {
			if ( xlvl >= 0x80000001 )
				c->x86_capability[1] = cpuid_edx(0x80000001);
			if ( xlvl >= 0x80000004 )
				get_model_name(c); /* Default name */
		}

		/* Transmeta-defined flags: level 0x80860001 */
		xlvl = cpuid_eax(0x80860000);
		if ( (xlvl & 0xffff0000) == 0x80860000 ) {
			if (  xlvl >= 0x80860001 )
				c->x86_capability[2] = cpuid_edx(0x80860001);
		}
	}

	printk(KERN_DEBUG "CPU: Before vendor init, caps: %08x %08x %08x, vendor = %d\n",
	       c->x86_capability[0],
	       c->x86_capability[1],
	       c->x86_capability[2],
	       c->x86_vendor);

	/*
	 * Vendor-specific initialization.  In this section we
	 * canonicalize the feature flags, meaning if there are
	 * features a certain CPU supports which CPUID doesn't
	 * tell us, CPUID claiming incorrect flags, or other bugs,
	 * we handle them here.
	 *
	 * At the end of this section, c->x86_capability better
	 * indicate the features this CPU genuinely supports!
	 */
	switch ( c->x86_vendor ) {
	case X86_VENDOR_UNKNOWN:
	default:
		/* Not much we can do here... */
		/* Check if at least it has cpuid */
		if (c->cpuid_level == -1)
		{
			/* No cpuid. It must be an ancient CPU */
			if (c->x86 == 4)
				strcpy(c->x86_model_id, "486");
			else if (c->x86 == 3)
				strcpy(c->x86_model_id, "386");
		}
		break;

	case X86_VENDOR_CYRIX:
		init_cyrix(c);
		break;

	case X86_VENDOR_AMD:
		init_amd(c);
		break;

	case X86_VENDOR_CENTAUR:
		init_centaur(c);
		break;

	case X86_VENDOR_INTEL:
		init_intel(c);
		break;

	case X86_VENDOR_NEXGEN:
		c->x86_cache_size = 256; /* A few had 1 MB... */
		break;

	case X86_VENDOR_TRANSMETA:
		init_transmeta(c);
		break;

	case X86_VENDOR_RISE:
		init_rise(c);
		break;
	}
	
	printk(KERN_DEBUG "CPU: After vendor init, caps: %08x %08x %08x %08x\n",
	       c->x86_capability[0],
	       c->x86_capability[1],
	       c->x86_capability[2],
	       c->x86_capability[3]);

	/*
	 * The vendor-specific functions might have changed features.  Now
	 * we do "generic changes."
	 */

	/* TSC disabled? */
#ifndef CONFIG_X86_TSC
	if ( tsc_disable )
		clear_bit(X86_FEATURE_TSC, &c->x86_capability);
#endif

	/* FXSR disabled? */
	if (disable_x86_fxsr) {
		clear_bit(X86_FEATURE_FXSR, &c->x86_capability);
		clear_bit(X86_FEATURE_XMM, &c->x86_capability);
	}

	/* Disable the PN if appropriate */
	squash_the_stupid_serial_number(c);

	/* If the model name is still unset, do table lookup. */
	if ( !c->x86_model_id[0] ) {
		char *p;
		p = table_lookup_model(c);
		if ( p )
			strcpy(c->x86_model_id, p);
		else
			/* Last resort... */
			sprintf(c->x86_model_id, "%02x/%02x",
				c->x86_vendor, c->x86_model);
	}

	/* Now the feature flags better reflect actual CPU features! */

	printk(KERN_DEBUG "CPU:     After generic, caps: %08x %08x %08x %08x\n",
	       c->x86_capability[0],
	       c->x86_capability[1],
	       c->x86_capability[2],
	       c->x86_capability[3]);

	/*
	 * On SMP, boot_cpu_data holds the common feature set between
	 * all CPUs; so make sure that we indicate which features are
	 * common between the CPUs.  The first time this routine gets
	 * executed, c == &boot_cpu_data.
	 */
	if ( c != &boot_cpu_data ) {
		/* AND the already accumulated flags with these */
		for ( i = 0 ; i < NCAPINTS ; i++ )
			boot_cpu_data.x86_capability[i] &= c->x86_capability[i];
	}

	printk(KERN_DEBUG "CPU:             Common caps: %08x %08x %08x %08x\n",
	       boot_cpu_data.x86_capability[0],
	       boot_cpu_data.x86_capability[1],
	       boot_cpu_data.x86_capability[2],
	       boot_cpu_data.x86_capability[3]);
}
/*
 *	Perform early boot up checks for a valid TSC. See arch/i386/kernel/time.c
 */
 
void __init dodgy_tsc(void)
{
	get_cpu_vendor(&boot_cpu_data);

	if ( boot_cpu_data.x86_vendor == X86_VENDOR_CYRIX )
		init_cyrix(&boot_cpu_data);
}


/* These need to match <asm/processor.h> */
static char *cpu_vendor_names[] __initdata = {
	"Intel", "Cyrix", "AMD", "UMC", "NexGen", "Centaur", "Rise", "Transmeta" };


void __init print_cpu_info(struct cpuinfo_x86 *c)
{
	char *vendor = NULL;

	if (c->x86_vendor < sizeof(cpu_vendor_names)/sizeof(char *))
		vendor = cpu_vendor_names[c->x86_vendor];
	else if (c->cpuid_level >= 0)
		vendor = c->x86_vendor_id;

	if (vendor && strncmp(c->x86_model_id, vendor, strlen(vendor)))
		printk("%s ", vendor);

	if (!c->x86_model_id[0])
		printk("%d86", c->x86);
	else
		printk("%s", c->x86_model_id);

	if (c->x86_mask || c->cpuid_level >= 0) 
		printk(" stepping %02x\n", c->x86_mask);
	else
		printk("\n");
}

/*
 *	Get CPU information for use by the procfs.
 */

int get_cpuinfo(char * buffer)
{
	char *p = buffer;

	/* 
	 * These flag bits must match the definitions in <asm/cpufeature.h>.
	 * NULL means this bit is undefined or reserved; either way it doesn't
	 * have meaning as far as Linux is concerned.  Note that it's important
	 * to realize there is a difference between this table and CPUID -- if
	 * applications want to get the raw CPUID data, they should access
	 * /dev/cpu/<cpu_nr>/cpuid instead.
	 */
	static char *x86_cap_flags[] = {
		/* Intel-defined */
	        "fpu", "vme", "de", "pse", "tsc", "msr", "pae", "mce",
	        "cx8", "apic", NULL, "sep", "mtrr", "pge", "mca", "cmov",
	        "pat", "pse36", "pn", "clflush", NULL, "dts", "acpi", "mmx",
	        "fxsr", "sse", "sse2", "ss", NULL, "tm", "ia64", NULL,

		/* AMD-defined */
		NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
		NULL, NULL, NULL, "syscall", NULL, NULL, NULL, NULL,
		NULL, NULL, NULL, NULL, NULL, NULL, "mmxext", NULL,
		NULL, NULL, NULL, NULL, NULL, "lm", "3dnowext", "3dnow",

		/* Transmeta-defined */
		"recovery", "longrun", NULL, "lrti", NULL, NULL, NULL, NULL,
		NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
		NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
		NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,

		/* Other (Linux-defined) */
		"cxmmx", "k6_mtrr", "cyrix_arr", "centaur_mcr", NULL, NULL, NULL, NULL,
		NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
		NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
		NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
	};
	struct cpuinfo_x86 *c = cpu_data;
	int i, n;

	for (n = 0; n < NR_CPUS; n++, c++) {
		int fpu_exception;
#ifdef CONFIG_SMP
		if (!(cpu_online_map & (1<<n)))
			continue;
#endif
		p += sprintf(p,"processor\t: %d\n"
			"vendor_id\t: %s\n"
			"cpu family\t: %d\n"
			"model\t\t: %d\n"
			"model name\t: %s\n",
			n,
			c->x86_vendor_id[0] ? c->x86_vendor_id : "unknown",
			c->x86,
			c->x86_model,
			c->x86_model_id[0] ? c->x86_model_id : "unknown");

		if (c->x86_mask || c->cpuid_level >= 0)
			p += sprintf(p, "stepping\t: %d\n", c->x86_mask);
		else
			p += sprintf(p, "stepping\t: unknown\n");

		if ( test_bit(X86_FEATURE_TSC, &c->x86_capability) ) {
			p += sprintf(p, "cpu MHz\t\t: %lu.%03lu\n",
				cpu_khz / 1000, (cpu_khz % 1000));
		}

		/* Cache size */
		if (c->x86_cache_size >= 0)
			p += sprintf(p, "cache size\t: %d KB\n", c->x86_cache_size);
		
		/* We use exception 16 if we have hardware math and we've either seen it or the CPU claims it is internal */
		fpu_exception = c->hard_math && (ignore_irq13 || cpu_has_fpu);
		p += sprintf(p, "fdiv_bug\t: %s\n"
			        "hlt_bug\t\t: %s\n"
			        "f00f_bug\t: %s\n"
			        "coma_bug\t: %s\n"
			        "fpu\t\t: %s\n"
			        "fpu_exception\t: %s\n"
			        "cpuid level\t: %d\n"
			        "wp\t\t: %s\n"
			        "flags\t\t:",
			     c->fdiv_bug ? "yes" : "no",
			     c->hlt_works_ok ? "no" : "yes",
			     c->f00f_bug ? "yes" : "no",
			     c->coma_bug ? "yes" : "no",
			     c->hard_math ? "yes" : "no",
			     fpu_exception ? "yes" : "no",
			     c->cpuid_level,
			     c->wp_works_ok ? "yes" : "no");

		for ( i = 0 ; i < 32*NCAPINTS ; i++ )
			if ( test_bit(i, &c->x86_capability) &&
			     x86_cap_flags[i] != NULL )
				p += sprintf(p, " %s", x86_cap_flags[i]);

		p += sprintf(p, "\nbogomips\t: %lu.%02lu\n\n",
			     c->loops_per_jiffy/(500000/HZ),
			     (c->loops_per_jiffy/(5000/HZ)) % 100);
	}
	return p - buffer;
}

static unsigned long cpu_initialized __initdata = 0;

/*
 * cpu_init() initializes state that is per-CPU. Some data is already
 * initialized (naturally) in the bootstrap process, such as the GDT
 * and IDT. We reload them nevertheless, this function acts as a
 * 'CPU state barrier', nothing should get across.
 */
void __init cpu_init (void)
{
	int nr = smp_processor_id();
	struct tss_struct * t = &init_tss[nr];

	if (test_and_set_bit(nr, &cpu_initialized)) {
		printk(KERN_WARNING "CPU#%d already initialized!\n", nr);
		for (;;) __sti();
	}
	printk(KERN_INFO "Initializing CPU#%d\n", nr);

	if (cpu_has_vme || cpu_has_tsc || cpu_has_de)
		clear_in_cr4(X86_CR4_VME|X86_CR4_PVI|X86_CR4_TSD|X86_CR4_DE);
#ifndef CONFIG_X86_TSC
	if (tsc_disable && cpu_has_tsc) {
		printk(KERN_NOTICE "Disabling TSC...\n");
		/**** FIX-HPA: DOES THIS REALLY BELONG HERE? ****/
		clear_bit(X86_FEATURE_TSC, boot_cpu_data.x86_capability);
		set_in_cr4(X86_CR4_TSD);
	}
#endif

	__asm__ __volatile__("lgdt %0": "=m" (gdt_descr));
	__asm__ __volatile__("lidt %0": "=m" (idt_descr));

	/*
	 * Delete NT
	 */
	__asm__("pushfl ; andl $0xffffbfff,(%esp) ; popfl");

	/*
	 * set up and load the per-CPU TSS and LDT
	 */
	atomic_inc(&init_mm.mm_count);
	current->active_mm = &init_mm;
	if(current->mm)
		BUG();
	enter_lazy_tlb(&init_mm, current, nr);

	t->esp0 = current->thread.esp0;
	set_tss_desc(nr,t);
	gdt_table[__TSS(nr)].b &= 0xfffffdff;
	load_TR(nr);
	load_LDT(&init_mm);

	/*
	 * Clear all 6 debug registers:
	 */

#define CD(register) __asm__("movl %0,%%db" #register ::"r"(0) );

	CD(0); CD(1); CD(2); CD(3); /* no db4 and db5 */; CD(6); CD(7);

#undef CD

	/*
	 * Force FPU initialization:
	 */
	current->flags &= ~PF_USEDFPU;
	current->used_math = 0;
	stts();
}

/*
 * Local Variables:
 * mode:c
 * c-file-style:"k&r"
 * c-basic-offset:8
 * End:
 */