Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 | // SPDX-License-Identifier: GPL-2.0+ // // Copyright 2013 Greg Ungerer <gerg@uclinux.org> // Copyright 2011 Freescale Semiconductor, Inc. // Copyright 2011 Linaro Ltd. /dts-v1/; #include "imx50.dtsi" / { model = "Freescale i.MX50 Evaluation Kit"; compatible = "fsl,imx50-evk", "fsl,imx50"; memory@70000000 { device_type = "memory"; reg = <0x70000000 0x80000000>; }; }; &cspi { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_cspi>; cs-gpios = <&gpio4 11 GPIO_ACTIVE_LOW>, <&gpio4 13 GPIO_ACTIVE_LOW>; status = "okay"; flash: flash@1 { #address-cells = <1>; #size-cells = <1>; compatible = "m25p32", "jedec,spi-nor"; spi-max-frequency = <25000000>; reg = <1>; partition@0 { label = "bootloader"; reg = <0x0 0x100000>; read-only; }; partition@100000 { label = "kernel"; reg = <0x100000 0x300000>; }; }; }; &fec { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_fec>; phy-mode = "rmii"; phy-reset-gpios = <&gpio4 12 GPIO_ACTIVE_LOW>; status = "okay"; }; &iomuxc { imx50-evk { pinctrl_cspi: cspigrp { fsl,pins = < MX50_PAD_CSPI_SCLK__CSPI_SCLK 0x00 MX50_PAD_CSPI_MISO__CSPI_MISO 0x00 MX50_PAD_CSPI_MOSI__CSPI_MOSI 0x00 MX50_PAD_CSPI_SS0__GPIO4_11 0xc4 MX50_PAD_ECSPI1_MOSI__GPIO4_13 0x84 >; }; pinctrl_fec: fecgrp { fsl,pins = < MX50_PAD_SSI_RXFS__FEC_MDC 0x80 MX50_PAD_SSI_RXC__FEC_MDIO 0x80 MX50_PAD_DISP_D0__FEC_TX_CLK 0x80 MX50_PAD_DISP_D1__FEC_RX_ERR 0x80 MX50_PAD_DISP_D2__FEC_RX_DV 0x80 MX50_PAD_DISP_D3__FEC_RDATA_1 0x80 MX50_PAD_DISP_D4__FEC_RDATA_0 0x80 MX50_PAD_DISP_D5__FEC_TX_EN 0x80 MX50_PAD_DISP_D6__FEC_TDATA_1 0x80 MX50_PAD_DISP_D7__FEC_TDATA_0 0x80 >; }; pinctrl_uart1: uart1grp { fsl,pins = < MX50_PAD_UART1_TXD__UART1_TXD_MUX 0x1e4 MX50_PAD_UART1_RXD__UART1_RXD_MUX 0x1e4 MX50_PAD_UART1_RTS__UART1_RTS 0x1e4 MX50_PAD_UART1_CTS__UART1_CTS 0x1e4 >; }; }; }; &uart1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; status = "okay"; }; &usbh1 { status = "okay"; }; &usbotg { status = "okay"; }; |