Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 | // SPDX-License-Identifier: GPL-2.0-or-later /* * lnbh25.c * * Driver for LNB supply and control IC LNBH25 * * Copyright (C) 2014 NetUP Inc. * Copyright (C) 2014 Sergey Kozlov <serjk@netup.ru> * Copyright (C) 2014 Abylay Ospan <aospan@netup.ru> */ #include <linux/module.h> #include <linux/init.h> #include <linux/string.h> #include <linux/slab.h> #include <media/dvb_frontend.h> #include "lnbh25.h" /** * struct lnbh25_priv - LNBH25 driver private data * @i2c: pointer to the I2C adapter structure * @i2c_address: I2C address of LNBH25 SEC chip * @config: Registers configuration: * offset 0: 1st register address, always 0x02 (DATA1) * offset 1: DATA1 register value * offset 2: DATA2 register value */ struct lnbh25_priv { struct i2c_adapter *i2c; u8 i2c_address; u8 config[3]; }; #define LNBH25_STATUS_OFL 0x1 #define LNBH25_STATUS_VMON 0x4 #define LNBH25_VSEL_13 0x03 #define LNBH25_VSEL_18 0x0a static int lnbh25_read_vmon(struct lnbh25_priv *priv) { int i, ret; u8 addr = 0x00; u8 status[6]; struct i2c_msg msg[2] = { { .addr = priv->i2c_address, .flags = 0, .len = 1, .buf = &addr }, { .addr = priv->i2c_address, .flags = I2C_M_RD, .len = sizeof(status), .buf = status } }; for (i = 0; i < 2; i++) { ret = i2c_transfer(priv->i2c, &msg[i], 1); if (ret >= 0 && ret != 1) ret = -EIO; if (ret < 0) { dev_dbg(&priv->i2c->dev, "%s(): I2C transfer %d failed (%d)\n", __func__, i, ret); return ret; } } dev_dbg(&priv->i2c->dev, "%s(): %*ph\n", __func__, (int) sizeof(status), status); if ((status[0] & (LNBH25_STATUS_OFL | LNBH25_STATUS_VMON)) != 0) { dev_err(&priv->i2c->dev, "%s(): voltage in failure state, status reg 0x%x\n", __func__, status[0]); return -EIO; } return 0; } static int lnbh25_set_voltage(struct dvb_frontend *fe, enum fe_sec_voltage voltage) { int ret; u8 data1_reg; const char *vsel; struct lnbh25_priv *priv = fe->sec_priv; struct i2c_msg msg = { .addr = priv->i2c_address, .flags = 0, .len = sizeof(priv->config), .buf = priv->config }; switch (voltage) { case SEC_VOLTAGE_OFF: data1_reg = 0x00; vsel = "Off"; break; case SEC_VOLTAGE_13: data1_reg = LNBH25_VSEL_13; vsel = "13V"; break; case SEC_VOLTAGE_18: data1_reg = LNBH25_VSEL_18; vsel = "18V"; break; default: return -EINVAL; } priv->config[1] = data1_reg; dev_dbg(&priv->i2c->dev, "%s(): %s, I2C 0x%x write [ %02x %02x %02x ]\n", __func__, vsel, priv->i2c_address, priv->config[0], priv->config[1], priv->config[2]); ret = i2c_transfer(priv->i2c, &msg, 1); if (ret >= 0 && ret != 1) ret = -EIO; if (ret < 0) { dev_err(&priv->i2c->dev, "%s(): I2C transfer error (%d)\n", __func__, ret); return ret; } if (voltage != SEC_VOLTAGE_OFF) { msleep(120); ret = lnbh25_read_vmon(priv); } else { msleep(20); ret = 0; } return ret; } static void lnbh25_release(struct dvb_frontend *fe) { struct lnbh25_priv *priv = fe->sec_priv; dev_dbg(&priv->i2c->dev, "%s()\n", __func__); lnbh25_set_voltage(fe, SEC_VOLTAGE_OFF); kfree(fe->sec_priv); fe->sec_priv = NULL; } struct dvb_frontend *lnbh25_attach(struct dvb_frontend *fe, struct lnbh25_config *cfg, struct i2c_adapter *i2c) { struct lnbh25_priv *priv; dev_dbg(&i2c->dev, "%s()\n", __func__); priv = kzalloc(sizeof(struct lnbh25_priv), GFP_KERNEL); if (!priv) return NULL; priv->i2c_address = (cfg->i2c_address >> 1); priv->i2c = i2c; priv->config[0] = 0x02; priv->config[1] = 0x00; priv->config[2] = cfg->data2_config; fe->sec_priv = priv; if (lnbh25_set_voltage(fe, SEC_VOLTAGE_OFF)) { dev_err(&i2c->dev, "%s(): no LNBH25 found at I2C addr 0x%02x\n", __func__, priv->i2c_address); kfree(priv); fe->sec_priv = NULL; return NULL; } fe->ops.release_sec = lnbh25_release; fe->ops.set_voltage = lnbh25_set_voltage; dev_info(&i2c->dev, "%s(): attached at I2C addr 0x%02x\n", __func__, priv->i2c_address); return fe; } EXPORT_SYMBOL_GPL(lnbh25_attach); MODULE_DESCRIPTION("ST LNBH25 driver"); MODULE_AUTHOR("info@netup.ru"); MODULE_LICENSE("GPL"); |