Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 | /* SPDX-License-Identifier: GPL-2.0-only */ /* * OMAP2xxx/3xxx-common Power/Reset Management (PRM) register definitions * * Copyright (C) 2007-2009, 2011-2012 Texas Instruments, Inc. * Copyright (C) 2008-2010 Nokia Corporation * Paul Walmsley * * The PRM hardware modules on the OMAP2/3 are quite similar to each * other. The PRM on OMAP4 has a new register layout, and is handled * in a separate file. */ #ifndef __ARCH_ARM_MACH_OMAP2_PRM2XXX_3XXX_H #define __ARCH_ARM_MACH_OMAP2_PRM2XXX_3XXX_H #include "prcm-common.h" #include "prm.h" /* * Module specific PRM register offsets from PRM_BASE + domain offset * * Use prm_{read,write}_mod_reg() with these registers. * * With a few exceptions, these are the register names beginning with * {PM,RM}_* on both OMAP2/3 SoC families.. (The exceptions are the * IRQSTATUS and IRQENABLE bits.) */ /* Register offsets appearing on both OMAP2 and OMAP3 */ #define OMAP2_RM_RSTCTRL 0x0050 #define OMAP2_RM_RSTTIME 0x0054 #define OMAP2_RM_RSTST 0x0058 #define OMAP2_PM_PWSTCTRL 0x00e0 #define OMAP2_PM_PWSTST 0x00e4 #define PM_WKEN 0x00a0 #define PM_WKEN1 PM_WKEN #define PM_WKST 0x00b0 #define PM_WKST1 PM_WKST #define PM_WKDEP 0x00c8 #define PM_EVGENCTRL 0x00d4 #define PM_EVGENONTIM 0x00d8 #define PM_EVGENOFFTIM 0x00dc #ifndef __ASSEMBLER__ #include <linux/io.h> #include "powerdomain.h" /* Power/reset management domain register get/set */ static inline u32 omap2_prm_read_mod_reg(s16 module, u16 idx) { return readl_relaxed(prm_base.va + module + idx); } static inline void omap2_prm_write_mod_reg(u32 val, s16 module, u16 idx) { writel_relaxed(val, prm_base.va + module + idx); } /* Read-modify-write a register in a PRM module. Caller must lock */ static inline u32 omap2_prm_rmw_mod_reg_bits(u32 mask, u32 bits, s16 module, s16 idx) { u32 v; v = omap2_prm_read_mod_reg(module, idx); v &= ~mask; v |= bits; omap2_prm_write_mod_reg(v, module, idx); return v; } /* Read a PRM register, AND it, and shift the result down to bit 0 */ static inline u32 omap2_prm_read_mod_bits_shift(s16 domain, s16 idx, u32 mask) { u32 v; v = omap2_prm_read_mod_reg(domain, idx); v &= mask; v >>= __ffs(mask); return v; } static inline u32 omap2_prm_set_mod_reg_bits(u32 bits, s16 module, s16 idx) { return omap2_prm_rmw_mod_reg_bits(bits, bits, module, idx); } static inline u32 omap2_prm_clear_mod_reg_bits(u32 bits, s16 module, s16 idx) { return omap2_prm_rmw_mod_reg_bits(bits, 0x0, module, idx); } /* These omap2_ PRM functions apply to both OMAP2 and 3 */ int omap2_prm_is_hardreset_asserted(u8 shift, u8 part, s16 prm_mod, u16 offset); int omap2_prm_assert_hardreset(u8 shift, u8 part, s16 prm_mod, u16 offset); int omap2_prm_deassert_hardreset(u8 rst_shift, u8 st_shift, u8 part, s16 prm_mod, u16 reset_offset, u16 st_offset); extern int omap2_pwrdm_set_mem_onst(struct powerdomain *pwrdm, u8 bank, u8 pwrst); extern int omap2_pwrdm_set_mem_retst(struct powerdomain *pwrdm, u8 bank, u8 pwrst); extern int omap2_pwrdm_read_mem_pwrst(struct powerdomain *pwrdm, u8 bank); extern int omap2_pwrdm_read_mem_retst(struct powerdomain *pwrdm, u8 bank); extern int omap2_pwrdm_set_logic_retst(struct powerdomain *pwrdm, u8 pwrst); extern int omap2_pwrdm_wait_transition(struct powerdomain *pwrdm); extern int omap2_clkdm_add_wkdep(struct clockdomain *clkdm1, struct clockdomain *clkdm2); extern int omap2_clkdm_del_wkdep(struct clockdomain *clkdm1, struct clockdomain *clkdm2); extern int omap2_clkdm_read_wkdep(struct clockdomain *clkdm1, struct clockdomain *clkdm2); extern int omap2_clkdm_clear_all_wkdeps(struct clockdomain *clkdm); #endif /* __ASSEMBLER */ /* * Bits common to specific registers * * The 3430 register and bit names are generally used, * since they tend to make more sense */ /* PM_EVGENONTIM_MPU */ /* Named PM_EVEGENONTIM_MPU on the 24XX */ #define OMAP_ONTIMEVAL_SHIFT 0 #define OMAP_ONTIMEVAL_MASK (0xffffffff << 0) /* PM_EVGENOFFTIM_MPU */ /* Named PM_EVEGENOFFTIM_MPU on the 24XX */ #define OMAP_OFFTIMEVAL_SHIFT 0 #define OMAP_OFFTIMEVAL_MASK (0xffffffff << 0) /* PRM_CLKSETUP and PRCM_VOLTSETUP */ /* Named PRCM_CLKSSETUP on the 24XX */ #define OMAP_SETUP_TIME_SHIFT 0 #define OMAP_SETUP_TIME_MASK (0xffff << 0) /* PRM_CLKSRC_CTRL */ /* Named PRCM_CLKSRC_CTRL on the 24XX */ #define OMAP_SYSCLKDIV_SHIFT 6 #define OMAP_SYSCLKDIV_MASK (0x3 << 6) #define OMAP_SYSCLKDIV_WIDTH 2 #define OMAP_AUTOEXTCLKMODE_SHIFT 3 #define OMAP_AUTOEXTCLKMODE_MASK (0x3 << 3) #define OMAP_SYSCLKSEL_SHIFT 0 #define OMAP_SYSCLKSEL_MASK (0x3 << 0) /* PM_EVGENCTRL_MPU */ #define OMAP_OFFLOADMODE_SHIFT 3 #define OMAP_OFFLOADMODE_MASK (0x3 << 3) #define OMAP_ONLOADMODE_SHIFT 1 #define OMAP_ONLOADMODE_MASK (0x3 << 1) #define OMAP_ENABLE_MASK (1 << 0) /* PRM_RSTTIME */ /* Named RM_RSTTIME_WKUP on the 24xx */ #define OMAP_RSTTIME2_SHIFT 8 #define OMAP_RSTTIME2_MASK (0x1f << 8) #define OMAP_RSTTIME1_SHIFT 0 #define OMAP_RSTTIME1_MASK (0xff << 0) /* PRM_RSTCTRL */ /* Named RM_RSTCTRL_WKUP on the 24xx */ /* 2420 calls RST_DPLL3 'RST_DPLL' */ #define OMAP_RST_DPLL3_MASK (1 << 2) #define OMAP_RST_GS_MASK (1 << 1) /* * Bits common to module-shared registers * * Not all registers of a particular type support all of these bits - * check TRM if you are unsure */ /* * 24XX: RM_RSTST_MPU and RM_RSTST_DSP - on 24XX, 'COREDOMAINWKUP_RST' is * called 'COREWKUP_RST' * * 3430: RM_RSTST_IVA2, RM_RSTST_MPU, RM_RSTST_GFX, RM_RSTST_DSS, * RM_RSTST_CAM, RM_RSTST_PER, RM_RSTST_NEON */ #define OMAP_COREDOMAINWKUP_RST_MASK (1 << 3) /* * 24XX: RM_RSTST_MPU, RM_RSTST_GFX, RM_RSTST_DSP * * 2430: RM_RSTST_MDM * * 3430: RM_RSTST_CORE, RM_RSTST_EMU */ #define OMAP_DOMAINWKUP_RST_MASK (1 << 2) /* * 24XX: RM_RSTST_MPU, RM_RSTST_WKUP, RM_RSTST_DSP * On 24XX, 'GLOBALWARM_RST' is called 'GLOBALWMPU_RST'. * * 2430: RM_RSTST_MDM * * 3430: RM_RSTST_CORE, RM_RSTST_EMU */ #define OMAP_GLOBALWARM_RST_SHIFT 1 #define OMAP_GLOBALWARM_RST_MASK (1 << 1) #define OMAP_GLOBALCOLD_RST_SHIFT 0 #define OMAP_GLOBALCOLD_RST_MASK (1 << 0) /* * 24XX: PM_WKDEP_GFX, PM_WKDEP_MPU, PM_WKDEP_CORE, PM_WKDEP_DSP * 2420 TRM sometimes uses "EN_WAKEUP" instead of "EN_WKUP" * * 2430: PM_WKDEP_MDM * * 3430: PM_WKDEP_IVA2, PM_WKDEP_GFX, PM_WKDEP_DSS, PM_WKDEP_CAM, * PM_WKDEP_PER */ #define OMAP_EN_WKUP_SHIFT 4 #define OMAP_EN_WKUP_MASK (1 << 4) /* * 24XX: PM_PWSTCTRL_MPU, PM_PWSTCTRL_CORE, PM_PWSTCTRL_GFX, * PM_PWSTCTRL_DSP * * 2430: PM_PWSTCTRL_MDM * * 3430: PM_PWSTCTRL_IVA2, PM_PWSTCTRL_CORE, PM_PWSTCTRL_GFX, * PM_PWSTCTRL_DSS, PM_PWSTCTRL_CAM, PM_PWSTCTRL_PER, * PM_PWSTCTRL_NEON */ #define OMAP_LOGICRETSTATE_MASK (1 << 2) #endif |