Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 | /* SPDX-License-Identifier: GPL-2.0 */ /* Marvell Octeon EP (EndPoint) Ethernet Driver * * Copyright (C) 2020 Marvell. * */ #ifndef _OCTEP_MAIN_H_ #define _OCTEP_MAIN_H_ #include "octep_tx.h" #include "octep_rx.h" #include "octep_ctrl_mbox.h" #define OCTEP_DRV_NAME "octeon_ep" #define OCTEP_DRV_STRING "Marvell Octeon EndPoint NIC Driver" #define OCTEP_PCIID_CN93_PF 0xB200177d #define OCTEP_PCIID_CN93_VF 0xB203177d #define OCTEP_PCI_DEVICE_ID_CN93_PF 0xB200 #define OCTEP_PCI_DEVICE_ID_CN93_VF 0xB203 #define OCTEP_PCI_DEVICE_ID_CNF95N_PF 0xB400 //95N PF #define OCTEP_MAX_QUEUES 63 #define OCTEP_MAX_IQ OCTEP_MAX_QUEUES #define OCTEP_MAX_OQ OCTEP_MAX_QUEUES #define OCTEP_MAX_VF 64 #define OCTEP_MAX_MSIX_VECTORS OCTEP_MAX_OQ /* Flags to disable and enable Interrupts */ #define OCTEP_INPUT_INTR (1) #define OCTEP_OUTPUT_INTR (2) #define OCTEP_MBOX_INTR (4) #define OCTEP_ALL_INTR 0xff #define OCTEP_IQ_INTR_RESEND_BIT 59 #define OCTEP_OQ_INTR_RESEND_BIT 59 #define OCTEP_MMIO_REGIONS 3 /* PCI address space mapping information. * Each of the 3 address spaces given by BAR0, BAR2 and BAR4 of * Octeon gets mapped to different physical address spaces in * the kernel. */ struct octep_mmio { /* The physical address to which the PCI address space is mapped. */ u8 __iomem *hw_addr; /* Flag indicating the mapping was successful. */ int mapped; }; struct octep_pci_win_regs { u8 __iomem *pci_win_wr_addr; u8 __iomem *pci_win_rd_addr; u8 __iomem *pci_win_wr_data; u8 __iomem *pci_win_rd_data; }; struct octep_hw_ops { void (*setup_iq_regs)(struct octep_device *oct, int q); void (*setup_oq_regs)(struct octep_device *oct, int q); void (*setup_mbox_regs)(struct octep_device *oct, int mbox); irqreturn_t (*non_ioq_intr_handler)(void *ioq_vector); irqreturn_t (*ioq_intr_handler)(void *ioq_vector); int (*soft_reset)(struct octep_device *oct); void (*reinit_regs)(struct octep_device *oct); u32 (*update_iq_read_idx)(struct octep_iq *iq); void (*enable_interrupts)(struct octep_device *oct); void (*disable_interrupts)(struct octep_device *oct); bool (*poll_non_ioq_interrupts)(struct octep_device *oct); void (*enable_io_queues)(struct octep_device *oct); void (*disable_io_queues)(struct octep_device *oct); void (*enable_iq)(struct octep_device *oct, int q); void (*disable_iq)(struct octep_device *oct, int q); void (*enable_oq)(struct octep_device *oct, int q); void (*disable_oq)(struct octep_device *oct, int q); void (*reset_io_queues)(struct octep_device *oct); void (*dump_registers)(struct octep_device *oct); }; /* Octeon mailbox data */ struct octep_mbox_data { u32 cmd; u32 total_len; u32 recv_len; u32 rsvd; u64 *data; }; /* Octeon device mailbox */ struct octep_mbox { /* A spinlock to protect access to this q_mbox. */ spinlock_t lock; u32 q_no; u32 state; /* SLI_MAC_PF_MBOX_INT for PF, SLI_PKT_MBOX_INT for VF. */ u8 __iomem *mbox_int_reg; /* SLI_PKT_PF_VF_MBOX_SIG(0) for PF, * SLI_PKT_PF_VF_MBOX_SIG(1) for VF. */ u8 __iomem *mbox_write_reg; /* SLI_PKT_PF_VF_MBOX_SIG(1) for PF, * SLI_PKT_PF_VF_MBOX_SIG(0) for VF. */ u8 __iomem *mbox_read_reg; struct octep_mbox_data mbox_data; }; /* Tx/Rx queue vector per interrupt. */ struct octep_ioq_vector { char name[OCTEP_MSIX_NAME_SIZE]; struct napi_struct napi; struct octep_device *octep_dev; struct octep_iq *iq; struct octep_oq *oq; cpumask_t affinity_mask; }; /* Octeon hardware/firmware offload capability flags. */ #define OCTEP_CAP_TX_CHECKSUM BIT(0) #define OCTEP_CAP_RX_CHECKSUM BIT(1) #define OCTEP_CAP_TSO BIT(2) /* Link modes */ enum octep_link_mode_bit_indices { OCTEP_LINK_MODE_10GBASE_T = 0, OCTEP_LINK_MODE_10GBASE_R, OCTEP_LINK_MODE_10GBASE_CR, OCTEP_LINK_MODE_10GBASE_KR, OCTEP_LINK_MODE_10GBASE_LR, OCTEP_LINK_MODE_10GBASE_SR, OCTEP_LINK_MODE_25GBASE_CR, OCTEP_LINK_MODE_25GBASE_KR, OCTEP_LINK_MODE_25GBASE_SR, OCTEP_LINK_MODE_40GBASE_CR4, OCTEP_LINK_MODE_40GBASE_KR4, OCTEP_LINK_MODE_40GBASE_LR4, OCTEP_LINK_MODE_40GBASE_SR4, OCTEP_LINK_MODE_50GBASE_CR2, OCTEP_LINK_MODE_50GBASE_KR2, OCTEP_LINK_MODE_50GBASE_SR2, OCTEP_LINK_MODE_50GBASE_CR, OCTEP_LINK_MODE_50GBASE_KR, OCTEP_LINK_MODE_50GBASE_LR, OCTEP_LINK_MODE_50GBASE_SR, OCTEP_LINK_MODE_100GBASE_CR4, OCTEP_LINK_MODE_100GBASE_KR4, OCTEP_LINK_MODE_100GBASE_LR4, OCTEP_LINK_MODE_100GBASE_SR4, OCTEP_LINK_MODE_NBITS }; /* Hardware interface link state information. */ struct octep_iface_link_info { /* Bitmap of Supported link speeds/modes. */ u64 supported_modes; /* Bitmap of Advertised link speeds/modes. */ u64 advertised_modes; /* Negotiated link speed in Mbps. */ u32 speed; /* MTU */ u16 mtu; /* Autonegotation state. */ #define OCTEP_LINK_MODE_AUTONEG_SUPPORTED BIT(0) #define OCTEP_LINK_MODE_AUTONEG_ADVERTISED BIT(1) u8 autoneg; /* Pause frames setting. */ #define OCTEP_LINK_MODE_PAUSE_SUPPORTED BIT(0) #define OCTEP_LINK_MODE_PAUSE_ADVERTISED BIT(1) u8 pause; /* Admin state of the link (ifconfig <iface> up/down */ u8 admin_up; /* Operational state of the link: physical link is up down */ u8 oper_up; }; /* The Octeon device specific private data structure. * Each Octeon device has this structure to represent all its components. */ struct octep_device { struct octep_config *conf; /* Octeon Chip type. */ u16 chip_id; u16 rev_id; /* Device capabilities enabled */ u64 caps_enabled; /* Device capabilities supported */ u64 caps_supported; /* Pointer to basic Linux device */ struct device *dev; /* Linux PCI device pointer */ struct pci_dev *pdev; /* Netdev corresponding to the Octeon device */ struct net_device *netdev; /* memory mapped io range */ struct octep_mmio mmio[OCTEP_MMIO_REGIONS]; /* MAC address */ u8 mac_addr[ETH_ALEN]; /* Tx queues (IQ: Instruction Queue) */ u16 num_iqs; /* pkind value to be used in every Tx hardware descriptor */ u8 pkind; /* Pointers to Octeon Tx queues */ struct octep_iq *iq[OCTEP_MAX_IQ]; /* Rx queues (OQ: Output Queue) */ u16 num_oqs; /* Pointers to Octeon Rx queues */ struct octep_oq *oq[OCTEP_MAX_OQ]; /* Hardware port number of the PCIe interface */ u16 pcie_port; /* PCI Window registers to access some hardware CSRs */ struct octep_pci_win_regs pci_win_regs; /* Hardware operations */ struct octep_hw_ops hw_ops; /* IRQ info */ u16 num_irqs; u16 num_non_ioq_irqs; char *non_ioq_irq_names; struct msix_entry *msix_entries; /* IOq information of it's corresponding MSI-X interrupt. */ struct octep_ioq_vector *ioq_vector[OCTEP_MAX_QUEUES]; /* Hardware Interface Tx statistics */ struct octep_iface_tx_stats iface_tx_stats; /* Hardware Interface Rx statistics */ struct octep_iface_rx_stats iface_rx_stats; /* Hardware Interface Link info like supported modes, aneg support */ struct octep_iface_link_info link_info; /* Mailbox to talk to VFs */ struct octep_mbox *mbox[OCTEP_MAX_VF]; /* Work entry to handle Tx timeout */ struct work_struct tx_timeout_task; /* control mbox over pf */ struct octep_ctrl_mbox ctrl_mbox; /* offset for iface stats */ u32 ctrl_mbox_ifstats_offset; /* Work entry to handle ctrl mbox interrupt */ struct work_struct ctrl_mbox_task; /* Wait queue for host to firmware requests */ wait_queue_head_t ctrl_req_wait_q; /* List of objects waiting for h2f response */ struct list_head ctrl_req_wait_list; /* Enable non-ioq interrupt polling */ bool poll_non_ioq_intr; /* Work entry to poll non-ioq interrupts */ struct delayed_work intr_poll_task; /* Firmware heartbeat timer */ struct timer_list hb_timer; /* Firmware heartbeat miss count tracked by timer */ atomic_t hb_miss_cnt; /* Task to reset device on heartbeat miss */ struct delayed_work hb_task; }; static inline u16 OCTEP_MAJOR_REV(struct octep_device *oct) { u16 rev = (oct->rev_id & 0xC) >> 2; return (rev == 0) ? 1 : rev; } static inline u16 OCTEP_MINOR_REV(struct octep_device *oct) { return (oct->rev_id & 0x3); } /* Octeon CSR read/write access APIs */ #define octep_write_csr(octep_dev, reg_off, value) \ writel(value, (octep_dev)->mmio[0].hw_addr + (reg_off)) #define octep_write_csr64(octep_dev, reg_off, val64) \ writeq(val64, (octep_dev)->mmio[0].hw_addr + (reg_off)) #define octep_read_csr(octep_dev, reg_off) \ readl((octep_dev)->mmio[0].hw_addr + (reg_off)) #define octep_read_csr64(octep_dev, reg_off) \ readq((octep_dev)->mmio[0].hw_addr + (reg_off)) /* Read windowed register. * @param oct - pointer to the Octeon device. * @param addr - Address of the register to read. * * This routine is called to read from the indirectly accessed * Octeon registers that are visible through a PCI BAR0 mapped window * register. * @return - 64 bit value read from the register. */ static inline u64 OCTEP_PCI_WIN_READ(struct octep_device *oct, u64 addr) { u64 val64; addr |= 1ull << 53; /* read 8 bytes */ writeq(addr, oct->pci_win_regs.pci_win_rd_addr); val64 = readq(oct->pci_win_regs.pci_win_rd_data); dev_dbg(&oct->pdev->dev, "%s: reg: 0x%016llx val: 0x%016llx\n", __func__, addr, val64); return val64; } /* Write windowed register. * @param oct - pointer to the Octeon device. * @param addr - Address of the register to write * @param val - Value to write * * This routine is called to write to the indirectly accessed * Octeon registers that are visible through a PCI BAR0 mapped window * register. * @return Nothing. */ static inline void OCTEP_PCI_WIN_WRITE(struct octep_device *oct, u64 addr, u64 val) { writeq(addr, oct->pci_win_regs.pci_win_wr_addr); writeq(val, oct->pci_win_regs.pci_win_wr_data); dev_dbg(&oct->pdev->dev, "%s: reg: 0x%016llx val: 0x%016llx\n", __func__, addr, val); } extern struct workqueue_struct *octep_wq; int octep_device_setup(struct octep_device *oct); int octep_setup_iqs(struct octep_device *oct); void octep_free_iqs(struct octep_device *oct); void octep_clean_iqs(struct octep_device *oct); int octep_setup_oqs(struct octep_device *oct); void octep_free_oqs(struct octep_device *oct); void octep_oq_dbell_init(struct octep_device *oct); void octep_device_setup_cn93_pf(struct octep_device *oct); int octep_iq_process_completions(struct octep_iq *iq, u16 budget); int octep_oq_process_rx(struct octep_oq *oq, int budget); void octep_set_ethtool_ops(struct net_device *netdev); #endif /* _OCTEP_MAIN_H_ */ |