Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 | # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- $id: http://devicetree.org/schemas/clock/imx35-clock.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Freescale i.MX35 Clock Controller maintainers: - Steffen Trumtrar <s.trumtrar@pengutronix.de> description: | The clock consumer should specify the desired clock by having the clock ID in its "clocks" phandle cell. The following is a full list of i.MX35 clocks and IDs. Clock ID --------------------------- ckih 0 mpll 1 ppll 2 mpll_075 3 arm 4 hsp 5 hsp_div 6 hsp_sel 7 ahb 8 ipg 9 arm_per_div 10 ahb_per_div 11 ipg_per 12 uart_sel 13 uart_div 14 esdhc_sel 15 esdhc1_div 16 esdhc2_div 17 esdhc3_div 18 spdif_sel 19 spdif_div_pre 20 spdif_div_post 21 ssi_sel 22 ssi1_div_pre 23 ssi1_div_post 24 ssi2_div_pre 25 ssi2_div_post 26 usb_sel 27 usb_div 28 nfc_div 29 asrc_gate 30 pata_gate 31 audmux_gate 32 can1_gate 33 can2_gate 34 cspi1_gate 35 cspi2_gate 36 ect_gate 37 edio_gate 38 emi_gate 39 epit1_gate 40 epit2_gate 41 esai_gate 42 esdhc1_gate 43 esdhc2_gate 44 esdhc3_gate 45 fec_gate 46 gpio1_gate 47 gpio2_gate 48 gpio3_gate 49 gpt_gate 50 i2c1_gate 51 i2c2_gate 52 i2c3_gate 53 iomuxc_gate 54 ipu_gate 55 kpp_gate 56 mlb_gate 57 mshc_gate 58 owire_gate 59 pwm_gate 60 rngc_gate 61 rtc_gate 62 rtic_gate 63 scc_gate 64 sdma_gate 65 spba_gate 66 spdif_gate 67 ssi1_gate 68 ssi2_gate 69 uart1_gate 70 uart2_gate 71 uart3_gate 72 usbotg_gate 73 wdog_gate 74 max_gate 75 admux_gate 76 csi_gate 77 csi_div 78 csi_sel 79 iim_gate 80 gpu2d_gate 81 ckli_gate 82 properties: compatible: const: fsl,imx35-ccm reg: maxItems: 1 interrupts: maxItems: 1 '#clock-cells': const: 1 required: - compatible - reg - interrupts - '#clock-cells' additionalProperties: false examples: - | clock-controller@53f80000 { compatible = "fsl,imx35-ccm"; reg = <0x53f80000 0x4000>; interrupts = <31>; #clock-cells = <1>; }; |