Linux Audio

Check our new training course

Embedded Linux Audio

Check our new training course
with Creative Commons CC-BY-SA
lecture materials

Bootlin logo

Elixir Cross Referencer

Loading...
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/display/panel/boe,bf060y8m-aj0.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: BOE BF060Y8M-AJ0 5.99" 1080x2160 AMOLED Panel

maintainers:
  - AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>

description: |
  This is a 5.99" 1080x2160 16.7M Color active matrix AMOLED
  video mode panel module on MIPI-DSI 4-Lane interface, GGRB
  pixel arrangement, 63 micrometers pitch, with an active
  area of 68.04 x 136.08 millimeters.
  Each pixel is divided into red and green dots, or blue and
  green dots, and two pixels share red or blue dots which are
  arranged in vertical stripe.
  The DriverIC for this panel module is SW43404.

allOf:
  - $ref: panel-common.yaml#

properties:
  compatible:
    const: boe,bf060y8m-aj0

  elvdd-supply:
    description: EL Driving positive (VDD) supply (4.40-4.80V)
  elvss-supply:
    description: EL Driving negative (VSS) supply (-5.00V to -1.40V)
  vcc-supply:
    description: Core (TSP) voltage supply (2.70-3.60V)
  vci-supply:
    description: DriverIC Operation supply (2.60-3.60V)
  vddio-supply:
    description: I/O voltage supply (1.62-1.98V)

  port: true
  reg: true
  reset-gpios: true

required:
  - compatible
  - elvdd-supply
  - elvss-supply
  - vcc-supply
  - vci-supply
  - vddio-supply
  - reg
  - reset-gpios

additionalProperties: false

examples:
  - |
    #include <dt-bindings/gpio/gpio.h>

    dsi {
        #address-cells = <1>;
        #size-cells = <0>;
        panel@0 {
            compatible = "boe,bf060y8m-aj0";
            reg = <0>;

            reset-gpios = <&tlmm 94 GPIO_ACTIVE_HIGH>;

            vcc-supply = <&disp_vcc_vreg>;
            vddio-supply = <&disp_vddio_vreg>;
            vci-supply = <&disp_vci_vreg>;
            elvdd-supply = <&disp_elvdd_vreg>;
            elvss-supply = <&disp_elvss_vreg>;

            port {
                panel_in: endpoint {
                    remote-endpoint = <&dsi0_out>;
                };
            };
        };
    };