// SPDX-License-Identifier: GPL-2.0
// Copyright (C) 2022-2023 Microchip Technology Inc.
// PCI1xxxx OTP/EEPROM driver
#include <linux/auxiliary_bus.h>
#include <linux/device.h>
#include <linux/iopoll.h>
#include <linux/module.h>
#include <linux/nvmem-provider.h>
#include "mchp_pci1xxxx_gp.h"
#define AUX_DRIVER_NAME "PCI1xxxxOTPE2P"
#define EEPROM_NAME "pci1xxxx_eeprom"
#define OTP_NAME "pci1xxxx_otp"
#define PERI_PF3_SYSTEM_REG_ADDR_BASE 0x2000
#define PERI_PF3_SYSTEM_REG_LENGTH 0x4000
#define EEPROM_SIZE_BYTES 8192
#define OTP_SIZE_BYTES 8192
#define CONFIG_REG_ADDR_BASE 0
#define EEPROM_REG_ADDR_BASE 0x0E00
#define OTP_REG_ADDR_BASE 0x1000
#define MMAP_OTP_OFFSET(x) (OTP_REG_ADDR_BASE + (x))
#define MMAP_EEPROM_OFFSET(x) (EEPROM_REG_ADDR_BASE + (x))
#define MMAP_CFG_OFFSET(x) (CONFIG_REG_ADDR_BASE + (x))
#define EEPROM_CMD_REG 0x00
#define EEPROM_DATA_REG 0x04
#define EEPROM_CMD_EPC_WRITE (BIT(29) | BIT(28))
#define EEPROM_CMD_EPC_TIMEOUT_BIT BIT(17)
#define EEPROM_CMD_EPC_BUSY_BIT BIT(31)
#define STATUS_READ_DELAY_US 1
#define STATUS_READ_TIMEOUT_US 20000
#define OTP_ADDR_HIGH_OFFSET 0x04
#define OTP_ADDR_LOW_OFFSET 0x08
#define OTP_PRGM_DATA_OFFSET 0x10
#define OTP_PRGM_MODE_OFFSET 0x14
#define OTP_RD_DATA_OFFSET 0x18
#define OTP_FUNC_CMD_OFFSET 0x20
#define OTP_CMD_GO_OFFSET 0x28
#define OTP_PASS_FAIL_OFFSET 0x2C
#define OTP_STATUS_OFFSET 0x30
#define OTP_FUNC_RD_BIT BIT(0)
#define OTP_FUNC_PGM_BIT BIT(1)
#define OTP_CMD_GO_BIT BIT(0)
#define OTP_STATUS_BUSY_BIT BIT(0)
#define OTP_PGM_MODE_BYTE_BIT BIT(0)
#define OTP_FAIL_BIT BIT(0)
#define OTP_PWR_DN_BIT BIT(0)
#define OTP_PWR_DN_OFFSET 0x00
#define CFG_SYS_LOCK_OFFSET 0xA0
#define CFG_SYS_LOCK_PF3 BIT(5)
#define BYTE_LOW (GENMASK(7, 0))
#define BYTE_HIGH (GENMASK(12, 8))
struct pci1xxxx_otp_eeprom_device {
struct auxiliary_device *pdev;
void __iomem *reg_base;
struct nvmem_config nvmem_config_eeprom;
struct nvmem_device *nvmem_eeprom;
struct nvmem_config nvmem_config_otp;
struct nvmem_device *nvmem_otp;
};
static int set_sys_lock(struct pci1xxxx_otp_eeprom_device *priv)
{
void __iomem *sys_lock = priv->reg_base +
MMAP_CFG_OFFSET(CFG_SYS_LOCK_OFFSET);
u8 data;
writel(CFG_SYS_LOCK_PF3, sys_lock);
data = readl(sys_lock);
if (data != CFG_SYS_LOCK_PF3)
return -EPERM;
return 0;
}
static void release_sys_lock(struct pci1xxxx_otp_eeprom_device *priv)
{
void __iomem *sys_lock = priv->reg_base +
MMAP_CFG_OFFSET(CFG_SYS_LOCK_OFFSET);
writel(0, sys_lock);
}
static bool is_eeprom_responsive(struct pci1xxxx_otp_eeprom_device *priv)
{
void __iomem *rb = priv->reg_base;
u32 regval;
int ret;
writel(EEPROM_CMD_EPC_TIMEOUT_BIT,
rb + MMAP_EEPROM_OFFSET(EEPROM_CMD_REG));
writel(EEPROM_CMD_EPC_BUSY_BIT,
rb + MMAP_EEPROM_OFFSET(EEPROM_CMD_REG));
/* Wait for the EPC_BUSY bit to get cleared or timeout bit to get set*/
ret = read_poll_timeout(readl, regval, !(regval & EEPROM_CMD_EPC_BUSY_BIT),
STATUS_READ_DELAY_US, STATUS_READ_TIMEOUT_US,
true, rb + MMAP_EEPROM_OFFSET(EEPROM_CMD_REG));
/* Return failure if either of software or hardware timeouts happen */
if (ret < 0 || (!ret && (regval & EEPROM_CMD_EPC_TIMEOUT_BIT)))
return false;
return true;
}
static int pci1xxxx_eeprom_read(void *priv_t, unsigned int off,
void *buf_t, size_t count)
{
struct pci1xxxx_otp_eeprom_device *priv = priv_t;
void __iomem *rb = priv->reg_base;
char *buf = buf_t;
u32 regval;
u32 byte;
int ret;
if (off >= priv->nvmem_config_eeprom.size)
return -EFAULT;
if ((off + count) > priv->nvmem_config_eeprom.size)
count = priv->nvmem_config_eeprom.size - off;
ret = set_sys_lock(priv);
if (ret)
return ret;
for (byte = 0; byte < count; byte++) {
writel(EEPROM_CMD_EPC_BUSY_BIT | (off + byte), rb +
MMAP_EEPROM_OFFSET(EEPROM_CMD_REG));
ret = read_poll_timeout(readl, regval,
!(regval & EEPROM_CMD_EPC_BUSY_BIT),
STATUS_READ_DELAY_US,
STATUS_READ_TIMEOUT_US, true,
rb + MMAP_EEPROM_OFFSET(EEPROM_CMD_REG));
if (ret < 0 || (!ret && (regval & EEPROM_CMD_EPC_TIMEOUT_BIT))) {
ret = -EIO;
goto error;
}
buf[byte] = readl(rb + MMAP_EEPROM_OFFSET(EEPROM_DATA_REG));
}
ret = byte;
error:
release_sys_lock(priv);
return ret;
}
static int pci1xxxx_eeprom_write(void *priv_t, unsigned int off,
void *value_t, size_t count)
{
struct pci1xxxx_otp_eeprom_device *priv = priv_t;
void __iomem *rb = priv->reg_base;
char *value = value_t;
u32 regval;
u32 byte;
int ret;
if (off >= priv->nvmem_config_eeprom.size)
return -EFAULT;
if ((off + count) > priv->nvmem_config_eeprom.size)
count = priv->nvmem_config_eeprom.size - off;
ret = set_sys_lock(priv);
if (ret)
return ret;
for (byte = 0; byte < count; byte++) {
writel(*(value + byte), rb + MMAP_EEPROM_OFFSET(EEPROM_DATA_REG));
regval = EEPROM_CMD_EPC_TIMEOUT_BIT | EEPROM_CMD_EPC_WRITE |
(off + byte);
writel(regval, rb + MMAP_EEPROM_OFFSET(EEPROM_CMD_REG));
writel(EEPROM_CMD_EPC_BUSY_BIT | regval,
rb + MMAP_EEPROM_OFFSET(EEPROM_CMD_REG));
ret = read_poll_timeout(readl, regval,
!(regval & EEPROM_CMD_EPC_BUSY_BIT),
STATUS_READ_DELAY_US,
STATUS_READ_TIMEOUT_US, true,
rb + MMAP_EEPROM_OFFSET(EEPROM_CMD_REG));
if (ret < 0 || (!ret && (regval & EEPROM_CMD_EPC_TIMEOUT_BIT))) {
ret = -EIO;
goto error;
}
}
ret = byte;
error:
release_sys_lock(priv);
return ret;
}
static void otp_device_set_address(struct pci1xxxx_otp_eeprom_device *priv,
u16 address)
{
u16 lo, hi;
lo = address & BYTE_LOW;
hi = (address & BYTE_HIGH) >> 8;
writew(lo, priv->reg_base + MMAP_OTP_OFFSET(OTP_ADDR_LOW_OFFSET));
writew(hi, priv->reg_base + MMAP_OTP_OFFSET(OTP_ADDR_HIGH_OFFSET));
}
static int pci1xxxx_otp_read(void *priv_t, unsigned int off,
void *buf_t, size_t count)
{
struct pci1xxxx_otp_eeprom_device *priv = priv_t;
void __iomem *rb = priv->reg_base;
char *buf = buf_t;
u32 regval;
u32 byte;
int ret;
u8 data;
if (off >= priv->nvmem_config_otp.size)
return -EFAULT;
if ((off + count) > priv->nvmem_config_otp.size)
count = priv->nvmem_config_otp.size - off;
ret = set_sys_lock(priv);
if (ret)
return ret;
for (byte = 0; byte < count; byte++) {
otp_device_set_address(priv, (u16)(off + byte));
data = readl(rb + MMAP_OTP_OFFSET(OTP_FUNC_CMD_OFFSET));
writel(data | OTP_FUNC_RD_BIT,
rb + MMAP_OTP_OFFSET(OTP_FUNC_CMD_OFFSET));
data = readl(rb + MMAP_OTP_OFFSET(OTP_CMD_GO_OFFSET));
writel(data | OTP_CMD_GO_BIT,
rb + MMAP_OTP_OFFSET(OTP_CMD_GO_OFFSET));
ret = read_poll_timeout(readl, regval,
!(regval & OTP_STATUS_BUSY_BIT),
STATUS_READ_DELAY_US,
STATUS_READ_TIMEOUT_US, true,
rb + MMAP_OTP_OFFSET(OTP_STATUS_OFFSET));
data = readl(rb + MMAP_OTP_OFFSET(OTP_PASS_FAIL_OFFSET));
if (ret < 0 || data & OTP_FAIL_BIT) {
ret = -EIO;
goto error;
}
buf[byte] = readl(rb + MMAP_OTP_OFFSET(OTP_RD_DATA_OFFSET));
}
ret = byte;
error:
release_sys_lock(priv);
return ret;
}
static int pci1xxxx_otp_write(void *priv_t, unsigned int off,
void *value_t, size_t count)
{
struct pci1xxxx_otp_eeprom_device *priv = priv_t;
void __iomem *rb = priv->reg_base;
char *value = value_t;
u32 regval;
u32 byte;
int ret;
u8 data;
if (off >= priv->nvmem_config_otp.size)
return -EFAULT;
if ((off + count) > priv->nvmem_config_otp.size)
count = priv->nvmem_config_otp.size - off;
ret = set_sys_lock(priv);
if (ret)
return ret;
for (byte = 0; byte < count; byte++) {
otp_device_set_address(priv, (u16)(off + byte));
/*
* Set OTP_PGM_MODE_BYTE command bit in OTP_PRGM_MODE register
* to enable Byte programming
*/
data = readl(rb + MMAP_OTP_OFFSET(OTP_PRGM_MODE_OFFSET));
writel(data | OTP_PGM_MODE_BYTE_BIT,
rb + MMAP_OTP_OFFSET(OTP_PRGM_MODE_OFFSET));
writel(*(value + byte), rb + MMAP_OTP_OFFSET(OTP_PRGM_DATA_OFFSET));
data = readl(rb + MMAP_OTP_OFFSET(OTP_FUNC_CMD_OFFSET));
writel(data | OTP_FUNC_PGM_BIT,
rb + MMAP_OTP_OFFSET(OTP_FUNC_CMD_OFFSET));
data = readl(rb + MMAP_OTP_OFFSET(OTP_CMD_GO_OFFSET));
writel(data | OTP_CMD_GO_BIT,
rb + MMAP_OTP_OFFSET(OTP_CMD_GO_OFFSET));
ret = read_poll_timeout(readl, regval,
!(regval & OTP_STATUS_BUSY_BIT),
STATUS_READ_DELAY_US,
STATUS_READ_TIMEOUT_US, true,
rb + MMAP_OTP_OFFSET(OTP_STATUS_OFFSET));
data = readl(rb + MMAP_OTP_OFFSET(OTP_PASS_FAIL_OFFSET));
if (ret < 0 || data & OTP_FAIL_BIT) {
ret = -EIO;
goto error;
}
}
ret = byte;
error:
release_sys_lock(priv);
return ret;
}
static int pci1xxxx_otp_eeprom_probe(struct auxiliary_device *aux_dev,
const struct auxiliary_device_id *id)
{
struct auxiliary_device_wrapper *aux_dev_wrapper;
struct pci1xxxx_otp_eeprom_device *priv;
struct gp_aux_data_type *pdata;
int ret;
u8 data;
aux_dev_wrapper = container_of(aux_dev, struct auxiliary_device_wrapper,
aux_dev);
pdata = &aux_dev_wrapper->gp_aux_data;
if (!pdata)
return -EINVAL;
priv = devm_kzalloc(&aux_dev->dev, sizeof(*priv), GFP_KERNEL);
if (!priv)
return -ENOMEM;
priv->pdev = aux_dev;
if (!devm_request_mem_region(&aux_dev->dev, pdata->region_start +
PERI_PF3_SYSTEM_REG_ADDR_BASE,
PERI_PF3_SYSTEM_REG_LENGTH,
aux_dev->name))
return -ENOMEM;
priv->reg_base = devm_ioremap(&aux_dev->dev, pdata->region_start +
PERI_PF3_SYSTEM_REG_ADDR_BASE,
PERI_PF3_SYSTEM_REG_LENGTH);
if (!priv->reg_base)
return -ENOMEM;
ret = set_sys_lock(priv);
if (ret)
return ret;
/* Set OTP_PWR_DN to 0 to make OTP Operational */
data = readl(priv->reg_base + MMAP_OTP_OFFSET(OTP_PWR_DN_OFFSET));
writel(data & ~OTP_PWR_DN_BIT,
priv->reg_base + MMAP_OTP_OFFSET(OTP_PWR_DN_OFFSET));
dev_set_drvdata(&aux_dev->dev, priv);
if (is_eeprom_responsive(priv)) {
priv->nvmem_config_eeprom.type = NVMEM_TYPE_EEPROM;
priv->nvmem_config_eeprom.name = EEPROM_NAME;
priv->nvmem_config_eeprom.dev = &aux_dev->dev;
priv->nvmem_config_eeprom.owner = THIS_MODULE;
priv->nvmem_config_eeprom.reg_read = pci1xxxx_eeprom_read;
priv->nvmem_config_eeprom.reg_write = pci1xxxx_eeprom_write;
priv->nvmem_config_eeprom.priv = priv;
priv->nvmem_config_eeprom.stride = 1;
priv->nvmem_config_eeprom.word_size = 1;
priv->nvmem_config_eeprom.size = EEPROM_SIZE_BYTES;
priv->nvmem_eeprom = devm_nvmem_register(&aux_dev->dev,
&priv->nvmem_config_eeprom);
if (IS_ERR(priv->nvmem_eeprom))
return PTR_ERR(priv->nvmem_eeprom);
}
release_sys_lock(priv);
priv->nvmem_config_otp.type = NVMEM_TYPE_OTP;
priv->nvmem_config_otp.name = OTP_NAME;
priv->nvmem_config_otp.dev = &aux_dev->dev;
priv->nvmem_config_otp.owner = THIS_MODULE;
priv->nvmem_config_otp.reg_read = pci1xxxx_otp_read;
priv->nvmem_config_otp.reg_write = pci1xxxx_otp_write;
priv->nvmem_config_otp.priv = priv;
priv->nvmem_config_otp.stride = 1;
priv->nvmem_config_otp.word_size = 1;
priv->nvmem_config_otp.size = OTP_SIZE_BYTES;
priv->nvmem_otp = devm_nvmem_register(&aux_dev->dev,
&priv->nvmem_config_otp);
if (IS_ERR(priv->nvmem_otp))
return PTR_ERR(priv->nvmem_otp);
return ret;
}
static void pci1xxxx_otp_eeprom_remove(struct auxiliary_device *aux_dev)
{
struct pci1xxxx_otp_eeprom_device *priv;
void __iomem *sys_lock;
priv = dev_get_drvdata(&aux_dev->dev);
sys_lock = priv->reg_base + MMAP_CFG_OFFSET(CFG_SYS_LOCK_OFFSET);
writel(CFG_SYS_LOCK_PF3, sys_lock);
/* Shut down OTP */
writel(OTP_PWR_DN_BIT,
priv->reg_base + MMAP_OTP_OFFSET(OTP_PWR_DN_OFFSET));
writel(0, sys_lock);
}
static const struct auxiliary_device_id pci1xxxx_otp_eeprom_auxiliary_id_table[] = {
{.name = "mchp_pci1xxxx_gp.gp_otp_e2p"},
{},
};
MODULE_DEVICE_TABLE(auxiliary, pci1xxxx_otp_eeprom_auxiliary_id_table);
static struct auxiliary_driver pci1xxxx_otp_eeprom_driver = {
.driver = {
.name = AUX_DRIVER_NAME,
},
.probe = pci1xxxx_otp_eeprom_probe,
.remove = pci1xxxx_otp_eeprom_remove,
.id_table = pci1xxxx_otp_eeprom_auxiliary_id_table
};
module_auxiliary_driver(pci1xxxx_otp_eeprom_driver);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Kumaravel Thiagarajan <kumaravel.thiagarajan@microchip.com>");
MODULE_AUTHOR("Tharun Kumar P <tharunkumar.pasumarthi@microchip.com>");
MODULE_AUTHOR("Vaibhaav Ram T.L <vaibhaavram.tl@microchip.com>");
MODULE_DESCRIPTION("Microchip Technology Inc. PCI1xxxx OTP EEPROM Programmer");