Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 | // SPDX-License-Identifier: GPL-2.0-or-later /* * phyCORE-MPC5200B-tiny (pcm030) board Device Tree Source * * Copyright 2006 Pengutronix * Sascha Hauer <s.hauer@pengutronix.de> * Copyright 2007 Pengutronix * Juergen Beisert <j.beisert@pengutronix.de> */ /include/ "mpc5200b.dtsi" &gpt0 { fsl,has-wdt; }; &gpt2 { gpio-controller; }; &gpt3 { gpio-controller; }; &gpt4 { gpio-controller; }; &gpt5 { gpio-controller; }; &gpt6 { gpio-controller; }; &gpt7 { gpio-controller; }; / { model = "phytec,pcm030"; compatible = "phytec,pcm030"; soc5200@f0000000 { audioplatform: psc@2000 { /* PSC1 in ac97 mode */ compatible = "mpc5200b-psc-ac97","fsl,mpc5200b-psc-ac97"; cell-index = <0>; }; /* PSC2 port is used by CAN1/2 */ psc@2200 { status = "disabled"; }; psc@2400 { /* PSC3 in UART mode */ compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; }; /* PSC4 is ??? */ psc@2600 { status = "disabled"; }; /* PSC5 is ??? */ psc@2800 { status = "disabled"; }; psc@2c00 { /* PSC6 in UART mode */ compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; }; ethernet@3000 { phy-handle = <&phy0>; }; mdio@3000 { phy0: ethernet-phy@0 { reg = <0>; }; }; i2c@3d40 { rtc@51 { compatible = "nxp,pcf8563"; reg = <0x51>; }; eeprom@52 { compatible = "catalyst,24c32", "atmel,24c32"; reg = <0x52>; pagesize = <32>; }; }; sram@8000 { compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram"; reg = <0x8000 0x4000>; }; }; pci@f0000d00 { interrupt-map-mask = <0xf800 0 0 7>; interrupt-map = <0xc000 0 0 1 &mpc5200_pic 0 0 3 // 1st slot 0xc000 0 0 2 &mpc5200_pic 1 1 3 0xc000 0 0 3 &mpc5200_pic 1 2 3 0xc000 0 0 4 &mpc5200_pic 1 3 3 0xc800 0 0 1 &mpc5200_pic 1 1 3 // 2nd slot 0xc800 0 0 2 &mpc5200_pic 1 2 3 0xc800 0 0 3 &mpc5200_pic 1 3 3 0xc800 0 0 4 &mpc5200_pic 0 0 3>; ranges = <0x42000000 0 0x80000000 0x80000000 0 0x20000000>, <0x02000000 0 0xa0000000 0xa0000000 0 0x10000000>, <0x01000000 0 0x00000000 0xb0000000 0 0x01000000>; }; localbus { status = "disabled"; }; sound { compatible = "phytec,pcm030-audio-fabric"; asoc-platform = <&audioplatform>; }; }; |