Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 | /* * Copyright (C) 2015 Lucas Stach <kernel@pengutronix.de> * * This file is dual-licensed: you can use it either under the terms * of the GPL or the X11 license, at your option. Note that this dual * licensing only applies to this file, and not this project as a * whole. * * a) This file is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following * conditions: * * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; #include "imx6q.dtsi" #include "imx6qdl-sr-som.dtsi" #include "imx6qdl-sr-som-brcm.dtsi" / { model = "Auvidea H100"; compatible = "auvidea,h100", "fsl,imx6q"; /* Will be filled by the bootloader */ memory@10000000 { device_type = "memory"; reg = <0x10000000 0>; }; aliases { rtc0 = &rtc; rtc1 = &snvs_rtc; }; chosen { stdout-path = &uart2; }; hdmi_osc: hdmi-osc { compatible = "fixed-clock"; clock-output-names = "hdmi-osc"; clock-frequency = <27000000>; #clock-cells = <0>; }; leds { compatible = "gpio-leds"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_h100_leds>; led0: led-power { label = "power"; gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; default-state = "on"; }; led1: led-stream { label = "stream"; gpios = <&gpio2 29 GPIO_ACTIVE_LOW>; default-state = "off"; }; led2: led-rec { label = "rec"; gpios = <&gpio2 28 GPIO_ACTIVE_LOW>; default-state = "off"; }; }; reg_3p3v: regulator-3p3v { compatible = "regulator-fixed"; regulator-name = "3P3V"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; reg_hdmi: regulator-hdmi { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_h100_reg_hdmi>; compatible = "regulator-fixed"; enable-active-high; gpio = <&gpio2 20 GPIO_ACTIVE_HIGH>; regulator-name = "V_HDMI"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; regulator-always-on; }; reg_usbh1_vbus: regulator-usb-h1-vbus { compatible = "regulator-fixed"; enable-active-high; gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_h100_usbh1_vbus>; regulator-name = "USB_H1_VBUS"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; }; reg_usbotg_vbus: regulator-usb-otg-vbus { compatible = "regulator-fixed"; enable-active-high; gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_h100_usbotg_vbus>; regulator-name = "USB_OTG_VBUS"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; }; sound-sgtl5000 { compatible = "fsl,imx-audio-sgtl5000"; model = "H100 on-board codec"; audio-codec = <&sgtl5000>; audio-routing = "MIC_IN", "Mic Jack", "Mic Jack", "Mic Bias", "Headphone Jack", "HP_OUT"; mux-ext-port = <5>; mux-int-port = <1>; ssi-controller = <&ssi1>; }; }; &audmux { status = "okay"; }; &hdmi { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_h100_hdmi>; ddc-i2c-bus = <&i2c2>; status = "okay"; }; &i2c1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_h100_i2c1>; status = "okay"; eeprom: eeprom@51 { compatible = "microchip,24c02", "atmel,24c02"; reg = <0x51>; }; rtc: pcf8523@68 { compatible = "nxp,pcf8523"; reg = <0x68>; }; sgtl5000: sgtl5000@a { compatible = "fsl,sgtl5000"; reg = <0x0a>; #sound-dai-cells = <0>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_h100_sgtl5000>; clocks = <&clks IMX6QDL_CLK_CKO>; VDDA-supply = <®_3p3v>; VDDIO-supply = <®_3p3v>; }; tc358743: tc358743@f { compatible = "toshiba,tc358743"; reg = <0x0f>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_h100_tc358743>; clocks = <&hdmi_osc>; clock-names = "refclk"; reset-gpios = <&gpio6 15 GPIO_ACTIVE_LOW>; /* IRQ has a wrong pull resistor which renders it useless */ port { tc358743_out: endpoint { remote-endpoint = <&mipi_csi2_in>; data-lanes = <1 2 3 4>; clock-lanes = <0>; clock-noncontinuous; link-frequencies = /bits/ 64 <297000000>; }; }; }; }; &i2c2 { clock-frequency = <100000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_h100_i2c2>; status = "okay"; }; &iomuxc { h100 { pinctrl_h100_hdmi: h100-hdmi { fsl,pins = < MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0 >; }; pinctrl_h100_i2c1: h100-i2c1 { fsl,pins = < MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 >; }; pinctrl_h100_i2c2: h100-i2c2 { fsl,pins = < MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 >; }; pinctrl_h100_leds: pinctrl-h100-leds { fsl,pins = < MX6QDL_PAD_EIM_DA0__GPIO3_IO00 0x1b0b0 MX6QDL_PAD_EIM_EB1__GPIO2_IO29 0x1b0b0 MX6QDL_PAD_EIM_EB0__GPIO2_IO28 0x1b0b0 >; }; pinctrl_h100_reg_hdmi: h100-reg-hdmi { fsl,pins = < MX6QDL_PAD_EIM_A18__GPIO2_IO20 0x1b0b0 >; }; pinctrl_h100_sgtl5000: h100-sgtl5000 { fsl,pins = < MX6QDL_PAD_DISP0_DAT19__AUD5_RXD 0x130b0 MX6QDL_PAD_KEY_COL0__AUD5_TXC 0x130b0 MX6QDL_PAD_KEY_ROW0__AUD5_TXD 0x110b0 MX6QDL_PAD_KEY_COL1__AUD5_TXFS 0x130b0 MX6QDL_PAD_GPIO_5__CCM_CLKO1 0x130b0 >; }; pinctrl_h100_tc358743: h100-tc358743 { fsl,pins = < MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x1b0b0 >; }; pinctrl_h100_uart2: h100-uart2 { fsl,pins = < MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1 MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1 >; }; pinctrl_h100_usbh1_vbus: hummingboard-usbh1-vbus { fsl,pins = < MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0 >; }; pinctrl_h100_usbotg_id: hummingboard-usbotg-id { fsl,pins = < MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x13059 >; }; pinctrl_h100_usbotg_vbus: hummingboard-usbotg-vbus { fsl,pins = < MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 >; }; pinctrl_h100_usdhc2: h100-usdhc2 { fsl,pins = < MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1f071 MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x13059 MX6QDL_PAD_KEY_ROW1__SD2_VSELECT 0x1b0b0 >; }; pinctrl_h100_usdhc2_100mhz: h100-usdhc2-100mhz { fsl,pins = < MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1f071 MX6QDL_PAD_SD2_CMD__SD2_CMD 0x170b9 MX6QDL_PAD_SD2_CLK__SD2_CLK 0x100b9 MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x170b9 MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x170b9 MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x170b9 MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x170b9 MX6QDL_PAD_KEY_ROW1__SD2_VSELECT 0x1b0b0 >; }; pinctrl_h100_usdhc2_200mhz: h100-usdhc2-200mhz { fsl,pins = < MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1f071 MX6QDL_PAD_SD2_CMD__SD2_CMD 0x170f9 MX6QDL_PAD_SD2_CLK__SD2_CLK 0x100f9 MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x170f9 MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x170f9 MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x170f9 MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x170f9 MX6QDL_PAD_KEY_ROW1__SD2_VSELECT 0x1b0b0 >; }; }; }; &mipi_csi { status = "okay"; port { mipi_csi2_in: endpoint { remote-endpoint = <&tc358743_out>; data-lanes = <1 2 3 4>; clock-lanes = <0>; clock-noncontinuous; link-frequencies = /bits/ 64 <297000000>; }; }; }; &ssi1 { status = "okay"; }; &uart2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_h100_uart2>; status = "okay"; }; &usbh1 { disable-over-current; vbus-supply = <®_usbh1_vbus>; status = "okay"; }; &usbotg { disable-over-current; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_h100_usbotg_id>; vbus-supply = <®_usbotg_vbus>; status = "okay"; }; &usdhc2 { pinctrl-names = "default", "state_100mhz", "state_200mhz"; pinctrl-0 = <&pinctrl_h100_usdhc2>; pinctrl-1 = <&pinctrl_h100_usdhc2_100mhz>; pinctrl-2 = <&pinctrl_h100_usdhc2_200mhz>; vmmc-supply = <®_3p3v>; cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; status = "okay"; }; |