Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 | #!/bin/bash # SPDX-License-Identifier: GPL-2.0 # Copyright 2022 NXP # The script is mostly generic, with the exception of the # ethtool per-TC counter names ("rx_green_prio_${tc}") WAIT_TIME=1 NUM_NETIFS=4 STABLE_MAC_ADDRS=yes NETIF_CREATE=no lib_dir=$(dirname $0)/../../../net/forwarding source $lib_dir/tc_common.sh source $lib_dir/lib.sh require_command dcb h1=${NETIFS[p1]} swp1=${NETIFS[p2]} swp2=${NETIFS[p3]} h2=${NETIFS[p4]} H1_IPV4="192.0.2.1" H2_IPV4="192.0.2.2" H1_IPV6="2001:db8:1::1" H2_IPV6="2001:db8:1::2" h1_create() { simple_if_init $h1 $H1_IPV4/24 $H1_IPV6/64 } h1_destroy() { simple_if_fini $h1 $H1_IPV4/24 $H1_IPV6/64 } h2_create() { simple_if_init $h2 $H2_IPV4/24 $H2_IPV6/64 } h2_destroy() { simple_if_fini $h2 $H2_IPV4/24 $H2_IPV6/64 } h1_vlan_create() { local vid=$1 vlan_create $h1 $vid simple_if_init $h1.$vid $H1_IPV4/24 $H1_IPV6/64 ip link set $h1.$vid type vlan \ egress-qos-map 0:0 1:1 2:2 3:3 4:4 5:5 6:6 7:7 \ ingress-qos-map 0:0 1:1 2:2 3:3 4:4 5:5 6:6 7:7 } h1_vlan_destroy() { local vid=$1 simple_if_fini $h1.$vid $H1_IPV4/24 $H1_IPV6/64 vlan_destroy $h1 $vid } h2_vlan_create() { local vid=$1 vlan_create $h2 $vid simple_if_init $h2.$vid $H2_IPV4/24 $H2_IPV6/64 ip link set $h2.$vid type vlan \ egress-qos-map 0:0 1:1 2:2 3:3 4:4 5:5 6:6 7:7 \ ingress-qos-map 0:0 1:1 2:2 3:3 4:4 5:5 6:6 7:7 } h2_vlan_destroy() { local vid=$1 simple_if_fini $h2.$vid $H2_IPV4/24 $H2_IPV6/64 vlan_destroy $h2 $vid } vlans_prepare() { h1_vlan_create 100 h2_vlan_create 100 tc qdisc add dev ${h1}.100 clsact tc filter add dev ${h1}.100 egress protocol ipv4 \ flower ip_proto icmp action skbedit priority 3 tc filter add dev ${h1}.100 egress protocol ipv6 \ flower ip_proto icmpv6 action skbedit priority 3 } vlans_destroy() { tc qdisc del dev ${h1}.100 clsact h1_vlan_destroy 100 h2_vlan_destroy 100 } switch_create() { ip link set ${swp1} up ip link set ${swp2} up # Ports should trust VLAN PCP even with vlan_filtering=0 ip link add br0 type bridge ip link set ${swp1} master br0 ip link set ${swp2} master br0 ip link set br0 up } switch_destroy() { ip link del br0 } setup_prepare() { vrf_prepare h1_create h2_create switch_create } cleanup() { pre_cleanup h2_destroy h1_destroy switch_destroy vrf_cleanup } dscp_cs_to_tos() { local dscp_cs=$1 # https://datatracker.ietf.org/doc/html/rfc2474 # 4.2.2.1 The Class Selector Codepoints echo $((${dscp_cs} << 5)) } run_test() { local test_name=$1; shift local if_name=$1; shift local tc=$1; shift local tos=$1; shift local counter_name="rx_green_prio_${tc}" local ipv4_before local ipv4_after local ipv6_before local ipv6_after ipv4_before=$(ethtool_stats_get ${swp1} "${counter_name}") ping_do ${if_name} $H2_IPV4 "-Q ${tos}" ipv4_after=$(ethtool_stats_get ${swp1} "${counter_name}") if [ $((${ipv4_after} - ${ipv4_before})) -lt ${PING_COUNT} ]; then RET=1 else RET=0 fi log_test "IPv4 ${test_name}" ipv6_before=$(ethtool_stats_get ${swp1} "${counter_name}") ping_do ${if_name} $H2_IPV6 "-Q ${tos}" ipv6_after=$(ethtool_stats_get ${swp1} "${counter_name}") if [ $((${ipv6_after} - ${ipv6_before})) -lt ${PING_COUNT} ]; then RET=1 else RET=0 fi log_test "IPv6 ${test_name}" } port_default_prio_get() { local if_name=$1 local prio prio="$(dcb -j app show dev ${if_name} default-prio | \ jq '.default_prio[]')" if [ -z "${prio}" ]; then prio=0 fi echo ${prio} } test_port_default() { local orig=$(port_default_prio_get ${swp1}) local dmac=$(mac_get ${h2}) dcb app replace dev ${swp1} default-prio 5 run_test "Port-default QoS classification" ${h1} 5 0 dcb app replace dev ${swp1} default-prio ${orig} } test_vlan_pcp() { vlans_prepare run_test "Trusted VLAN PCP QoS classification" ${h1}.100 3 0 vlans_destroy } test_ip_dscp() { local port_default=$(port_default_prio_get ${swp1}) local tos=$(dscp_cs_to_tos 4) dcb app add dev ${swp1} dscp-prio CS4:4 run_test "Trusted DSCP QoS classification" ${h1} 4 ${tos} dcb app del dev ${swp1} dscp-prio CS4:4 vlans_prepare run_test "Untrusted DSCP QoS classification follows VLAN PCP" \ ${h1}.100 3 ${tos} vlans_destroy run_test "Untrusted DSCP QoS classification follows port default" \ ${h1} ${port_default} ${tos} } trap cleanup EXIT ALL_TESTS=" test_port_default test_vlan_pcp test_ip_dscp " setup_prepare setup_wait tests_run exit $EXIT_STATUS |