Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 593 594 595 596 597 598 599 600 601 602 603 604 605 606 607 608 609 610 611 612 613 614 615 616 617 618 619 620 621 622 623 624 625 626 627 628 629 630 631 632 633 634 635 636 637 638 639 640 641 642 643 644 645 646 647 648 649 650 651 652 653 654 655 656 657 658 659 660 661 662 663 664 665 666 667 668 669 670 671 672 673 674 675 676 677 678 679 680 681 682 683 684 685 686 687 688 689 690 691 692 693 694 695 696 697 698 699 700 701 702 703 704 705 706 707 708 709 710 711 712 713 714 715 716 717 718 719 720 721 722 723 724 725 726 727 728 729 730 731 732 733 734 735 736 737 738 739 740 741 742 743 744 745 746 747 748 749 750 751 752 753 754 755 756 757 758 759 760 761 762 763 764 765 766 767 768 769 770 771 772 773 774 775 776 777 778 779 780 781 782 783 784 785 786 787 788 789 790 791 792 793 794 795 796 797 798 799 800 801 802 803 804 805 806 807 808 809 810 811 812 813 814 815 816 817 818 819 820 821 822 823 824 825 826 827 828 829 830 831 832 833 834 835 836 837 838 839 840 841 842 843 844 845 846 847 848 849 850 851 852 853 854 855 856 857 858 859 860 861 862 863 864 865 866 867 868 869 870 871 872 873 874 875 876 877 878 879 880 881 882 883 884 885 886 887 888 889 890 891 892 893 894 895 896 897 898 899 900 901 902 903 904 905 906 907 908 909 910 911 912 913 914 915 916 917 918 919 920 921 922 923 924 925 926 927 928 929 930 931 932 933 934 935 936 937 938 939 940 941 942 943 944 945 946 947 948 949 950 951 952 953 954 955 956 957 958 959 960 961 962 963 964 965 966 967 968 969 970 971 972 973 974 975 976 977 978 979 980 981 982 983 984 985 986 987 988 989 990 991 992 993 994 995 996 997 998 999 1000 1001 1002 1003 1004 1005 1006 1007 1008 1009 1010 1011 1012 1013 1014 1015 1016 1017 1018 1019 1020 1021 1022 1023 1024 1025 1026 1027 1028 1029 1030 1031 1032 1033 1034 1035 1036 1037 1038 1039 1040 1041 1042 1043 1044 1045 1046 1047 1048 1049 1050 1051 1052 1053 1054 1055 1056 1057 1058 1059 1060 1061 1062 1063 1064 1065 1066 1067 1068 1069 1070 1071 1072 1073 1074 1075 1076 1077 1078 1079 1080 1081 1082 1083 1084 1085 1086 1087 1088 1089 1090 1091 1092 1093 1094 1095 1096 1097 1098 1099 1100 1101 1102 1103 1104 1105 1106 1107 1108 1109 1110 1111 1112 1113 1114 1115 1116 1117 1118 1119 1120 1121 1122 1123 1124 1125 1126 1127 1128 1129 1130 1131 1132 1133 1134 1135 1136 1137 1138 1139 1140 1141 1142 1143 1144 1145 1146 1147 1148 1149 1150 1151 1152 1153 1154 1155 1156 1157 1158 1159 1160 1161 1162 1163 1164 1165 1166 1167 1168 1169 1170 1171 1172 1173 1174 1175 1176 1177 1178 1179 1180 1181 1182 1183 1184 1185 1186 1187 1188 1189 1190 1191 1192 1193 1194 1195 1196 1197 1198 1199 1200 1201 1202 1203 1204 1205 1206 1207 1208 1209 1210 1211 1212 1213 1214 1215 1216 1217 1218 1219 1220 1221 1222 1223 1224 1225 1226 1227 1228 1229 1230 1231 1232 1233 1234 1235 1236 1237 1238 1239 1240 1241 1242 1243 1244 1245 1246 1247 1248 1249 1250 1251 1252 1253 1254 1255 1256 1257 1258 1259 1260 1261 1262 1263 1264 1265 1266 1267 1268 1269 1270 1271 1272 1273 1274 1275 1276 1277 1278 1279 1280 1281 1282 1283 1284 1285 1286 1287 1288 1289 1290 1291 1292 1293 1294 1295 1296 1297 1298 1299 1300 1301 1302 1303 1304 1305 1306 1307 1308 1309 1310 1311 1312 1313 1314 1315 1316 1317 1318 1319 1320 1321 1322 1323 1324 1325 1326 1327 1328 1329 1330 1331 1332 1333 1334 1335 1336 1337 1338 1339 1340 1341 1342 1343 1344 1345 1346 1347 1348 1349 1350 1351 1352 1353 1354 1355 1356 1357 1358 1359 1360 1361 1362 1363 1364 1365 1366 1367 1368 1369 1370 1371 1372 1373 1374 1375 1376 1377 1378 1379 1380 1381 1382 1383 1384 1385 1386 1387 1388 1389 1390 1391 1392 1393 1394 1395 1396 1397 1398 1399 1400 1401 1402 1403 1404 1405 1406 1407 1408 1409 1410 1411 1412 1413 1414 1415 1416 1417 1418 1419 1420 1421 1422 1423 1424 1425 1426 1427 1428 1429 1430 1431 1432 1433 1434 1435 1436 1437 1438 1439 1440 1441 1442 1443 1444 1445 1446 1447 1448 1449 1450 1451 1452 1453 1454 1455 1456 1457 1458 1459 1460 1461 1462 1463 1464 1465 1466 1467 1468 1469 1470 1471 1472 1473 1474 1475 1476 1477 1478 1479 1480 1481 1482 1483 1484 1485 1486 1487 1488 1489 1490 1491 1492 1493 1494 1495 1496 1497 1498 1499 1500 1501 1502 1503 1504 1505 1506 1507 1508 1509 1510 1511 1512 1513 1514 1515 1516 1517 1518 1519 1520 1521 1522 1523 1524 1525 1526 1527 1528 1529 1530 1531 1532 1533 1534 1535 1536 1537 1538 1539 1540 1541 1542 1543 1544 1545 1546 1547 1548 1549 1550 1551 1552 1553 1554 1555 1556 1557 1558 1559 1560 1561 1562 1563 1564 1565 1566 1567 1568 1569 1570 1571 1572 1573 1574 1575 1576 1577 1578 1579 1580 1581 1582 1583 1584 1585 1586 1587 1588 1589 1590 1591 1592 1593 1594 1595 1596 1597 1598 1599 1600 1601 1602 1603 1604 1605 1606 1607 1608 1609 1610 1611 1612 1613 1614 1615 1616 1617 1618 1619 1620 1621 1622 1623 1624 1625 1626 1627 1628 1629 1630 1631 1632 1633 1634 1635 1636 1637 1638 1639 1640 1641 1642 1643 1644 1645 1646 1647 1648 1649 1650 1651 1652 1653 1654 1655 1656 1657 1658 1659 1660 1661 1662 1663 1664 1665 1666 1667 1668 1669 1670 1671 1672 1673 1674 1675 1676 1677 1678 1679 1680 1681 1682 1683 1684 1685 1686 1687 1688 1689 1690 1691 1692 1693 1694 1695 1696 1697 1698 1699 1700 1701 1702 1703 1704 1705 1706 1707 1708 1709 1710 1711 1712 1713 1714 1715 1716 1717 1718 1719 1720 1721 1722 1723 1724 1725 1726 1727 1728 1729 1730 1731 1732 1733 1734 1735 1736 1737 1738 1739 1740 1741 1742 1743 1744 1745 1746 1747 1748 1749 1750 1751 1752 1753 1754 1755 1756 1757 1758 1759 1760 1761 1762 1763 1764 1765 1766 1767 1768 1769 1770 1771 1772 1773 1774 1775 1776 1777 1778 1779 1780 1781 1782 1783 1784 1785 1786 1787 1788 1789 1790 1791 1792 1793 1794 1795 1796 1797 1798 1799 1800 1801 1802 1803 1804 1805 1806 1807 1808 1809 1810 1811 1812 1813 1814 1815 1816 1817 1818 1819 1820 1821 1822 1823 1824 1825 1826 1827 1828 1829 1830 1831 1832 1833 1834 1835 1836 1837 1838 1839 1840 1841 1842 1843 1844 1845 1846 1847 1848 1849 1850 1851 1852 1853 1854 1855 1856 1857 1858 1859 1860 1861 1862 1863 1864 1865 1866 1867 1868 1869 1870 1871 1872 1873 1874 1875 1876 1877 1878 1879 1880 1881 1882 1883 1884 1885 1886 1887 1888 1889 1890 1891 1892 1893 1894 1895 1896 1897 1898 1899 1900 1901 1902 1903 1904 1905 1906 1907 1908 1909 1910 1911 1912 1913 1914 1915 1916 1917 1918 1919 1920 1921 1922 1923 1924 1925 1926 1927 1928 1929 1930 1931 1932 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 1943 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 1961 1962 1963 1964 1965 1966 1967 1968 1969 1970 1971 1972 1973 1974 1975 1976 1977 1978 1979 1980 1981 1982 1983 1984 1985 1986 1987 1988 1989 1990 1991 1992 1993 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 2025 2026 2027 2028 2029 2030 2031 2032 2033 2034 2035 2036 2037 2038 2039 2040 2041 2042 2043 2044 2045 2046 2047 2048 2049 2050 2051 2052 2053 2054 2055 2056 2057 2058 2059 2060 2061 2062 2063 2064 2065 2066 2067 2068 2069 2070 2071 2072 2073 2074 2075 2076 2077 2078 2079 2080 2081 2082 2083 2084 2085 2086 2087 2088 2089 2090 2091 2092 2093 2094 2095 2096 2097 2098 2099 2100 2101 2102 2103 2104 2105 2106 2107 2108 2109 2110 2111 2112 2113 2114 2115 2116 2117 2118 2119 2120 2121 2122 2123 2124 2125 2126 2127 2128 2129 2130 2131 2132 2133 2134 2135 2136 2137 2138 2139 2140 2141 2142 2143 2144 2145 2146 2147 2148 2149 2150 2151 2152 2153 2154 2155 2156 2157 2158 2159 2160 2161 2162 2163 2164 2165 2166 2167 2168 2169 2170 2171 2172 2173 2174 2175 2176 2177 2178 2179 2180 2181 2182 2183 2184 2185 2186 2187 2188 2189 2190 2191 2192 2193 2194 2195 2196 2197 2198 2199 2200 2201 2202 2203 2204 2205 2206 2207 2208 2209 2210 2211 2212 2213 2214 2215 2216 2217 2218 2219 2220 2221 2222 2223 2224 2225 2226 2227 2228 2229 2230 2231 2232 2233 2234 2235 2236 2237 2238 2239 2240 2241 2242 2243 2244 2245 2246 2247 2248 2249 2250 2251 2252 2253 2254 2255 2256 2257 2258 2259 2260 2261 2262 2263 2264 2265 2266 2267 2268 2269 2270 2271 2272 2273 2274 2275 2276 2277 2278 2279 2280 2281 2282 2283 2284 2285 2286 2287 2288 2289 2290 2291 2292 2293 2294 2295 2296 2297 2298 2299 2300 2301 2302 2303 2304 2305 2306 2307 2308 2309 2310 2311 2312 2313 2314 2315 2316 2317 2318 2319 2320 2321 2322 2323 2324 2325 2326 2327 2328 2329 2330 2331 2332 2333 2334 2335 2336 2337 2338 2339 2340 2341 2342 2343 2344 2345 2346 2347 2348 2349 2350 2351 2352 2353 2354 2355 2356 2357 2358 2359 2360 2361 2362 2363 2364 2365 2366 2367 2368 2369 2370 2371 2372 2373 2374 2375 2376 2377 2378 2379 2380 2381 2382 2383 2384 2385 2386 2387 2388 2389 2390 2391 2392 2393 2394 2395 2396 2397 2398 2399 2400 2401 2402 2403 2404 2405 2406 2407 2408 2409 2410 2411 2412 2413 2414 2415 2416 2417 2418 2419 2420 2421 2422 2423 2424 2425 2426 2427 2428 2429 2430 2431 2432 2433 2434 2435 2436 2437 2438 2439 2440 2441 2442 2443 2444 2445 2446 2447 2448 2449 2450 2451 2452 2453 2454 2455 2456 2457 2458 2459 2460 2461 2462 2463 2464 2465 2466 2467 2468 2469 2470 2471 2472 2473 2474 2475 2476 2477 2478 2479 2480 2481 2482 2483 2484 2485 2486 2487 2488 2489 2490 2491 2492 2493 2494 2495 2496 2497 2498 2499 2500 2501 2502 2503 2504 2505 2506 2507 2508 2509 2510 2511 2512 2513 2514 2515 2516 2517 2518 2519 2520 2521 2522 2523 2524 2525 2526 2527 2528 2529 2530 2531 2532 2533 2534 2535 2536 2537 2538 2539 2540 2541 2542 2543 2544 2545 2546 2547 2548 2549 2550 2551 2552 2553 2554 2555 2556 2557 2558 2559 2560 2561 2562 2563 2564 2565 2566 2567 2568 2569 2570 2571 2572 2573 2574 2575 2576 2577 2578 2579 2580 2581 2582 2583 2584 2585 2586 2587 2588 2589 2590 2591 2592 2593 2594 2595 2596 2597 2598 2599 2600 2601 2602 2603 2604 2605 2606 2607 2608 2609 2610 2611 2612 2613 2614 2615 2616 2617 2618 2619 2620 2621 2622 2623 2624 2625 2626 2627 2628 2629 2630 2631 2632 2633 2634 2635 2636 2637 2638 2639 2640 2641 2642 2643 2644 2645 2646 2647 2648 2649 2650 2651 2652 2653 2654 2655 2656 2657 2658 2659 2660 2661 2662 2663 2664 2665 2666 2667 2668 2669 2670 2671 2672 2673 2674 2675 2676 2677 2678 2679 2680 2681 2682 2683 2684 2685 2686 2687 2688 2689 2690 2691 2692 2693 2694 2695 2696 2697 2698 2699 2700 2701 2702 2703 2704 2705 2706 2707 2708 2709 2710 2711 2712 2713 2714 2715 2716 2717 2718 2719 2720 2721 2722 2723 2724 2725 2726 2727 2728 2729 2730 2731 2732 2733 2734 2735 2736 2737 2738 2739 2740 2741 2742 2743 2744 2745 2746 2747 2748 2749 2750 2751 2752 2753 2754 2755 2756 2757 2758 2759 2760 2761 2762 2763 2764 2765 2766 2767 2768 2769 2770 2771 2772 2773 2774 2775 2776 2777 2778 2779 2780 2781 2782 2783 2784 2785 2786 2787 2788 2789 2790 2791 2792 2793 2794 2795 2796 2797 2798 2799 2800 2801 2802 2803 2804 2805 2806 2807 2808 2809 2810 2811 2812 2813 2814 2815 2816 2817 2818 2819 2820 2821 2822 2823 2824 2825 2826 2827 2828 2829 2830 2831 2832 2833 2834 2835 2836 2837 2838 2839 2840 2841 2842 2843 2844 2845 2846 2847 2848 2849 2850 2851 2852 2853 2854 2855 2856 2857 2858 2859 2860 2861 2862 2863 2864 2865 2866 2867 2868 2869 2870 2871 2872 2873 2874 2875 2876 2877 2878 2879 2880 2881 2882 2883 2884 2885 2886 2887 2888 2889 2890 2891 2892 2893 2894 2895 2896 2897 2898 2899 2900 2901 2902 2903 2904 2905 2906 2907 2908 2909 2910 2911 2912 2913 2914 2915 2916 2917 2918 2919 2920 2921 2922 2923 2924 2925 2926 2927 2928 2929 2930 2931 2932 2933 2934 2935 2936 2937 2938 2939 2940 2941 2942 2943 2944 2945 2946 2947 2948 2949 2950 2951 2952 2953 2954 2955 2956 2957 2958 2959 2960 2961 2962 2963 2964 2965 2966 2967 2968 2969 2970 2971 2972 2973 2974 2975 2976 2977 2978 2979 2980 2981 2982 2983 2984 2985 2986 2987 2988 2989 2990 2991 2992 2993 2994 2995 2996 2997 2998 2999 3000 3001 3002 3003 3004 3005 3006 3007 3008 3009 3010 3011 3012 3013 3014 3015 3016 3017 3018 3019 3020 3021 3022 3023 3024 3025 3026 3027 3028 3029 3030 3031 3032 3033 3034 3035 3036 3037 3038 3039 3040 3041 3042 3043 3044 3045 3046 3047 3048 3049 3050 3051 3052 3053 3054 3055 3056 3057 3058 3059 3060 3061 3062 3063 3064 3065 3066 3067 3068 3069 3070 3071 3072 3073 3074 3075 3076 3077 3078 3079 3080 3081 3082 3083 3084 3085 3086 3087 3088 3089 3090 3091 3092 3093 3094 3095 3096 3097 3098 3099 3100 3101 3102 3103 3104 3105 3106 3107 3108 3109 3110 3111 3112 3113 3114 3115 3116 3117 3118 3119 3120 3121 3122 3123 3124 3125 3126 3127 3128 3129 3130 3131 3132 3133 3134 3135 3136 3137 3138 3139 3140 3141 3142 3143 3144 3145 3146 3147 3148 3149 3150 3151 3152 3153 3154 3155 3156 3157 3158 3159 3160 3161 3162 3163 3164 3165 3166 3167 3168 3169 3170 3171 3172 3173 3174 3175 3176 3177 3178 3179 3180 3181 3182 3183 3184 3185 3186 3187 3188 3189 3190 3191 3192 3193 3194 3195 3196 3197 3198 3199 3200 3201 3202 3203 3204 3205 3206 3207 3208 3209 3210 3211 3212 3213 3214 3215 3216 3217 3218 3219 3220 3221 3222 3223 3224 3225 3226 3227 3228 3229 3230 3231 3232 3233 3234 3235 3236 3237 3238 3239 3240 3241 3242 3243 3244 3245 3246 3247 3248 3249 3250 3251 3252 3253 3254 3255 3256 3257 3258 3259 3260 3261 3262 3263 3264 3265 3266 3267 3268 3269 3270 3271 3272 3273 3274 3275 3276 3277 3278 3279 3280 3281 3282 3283 3284 3285 3286 3287 3288 3289 3290 3291 3292 3293 3294 3295 3296 3297 3298 3299 3300 3301 3302 3303 3304 3305 3306 3307 3308 3309 3310 3311 3312 3313 3314 3315 3316 3317 3318 3319 3320 3321 3322 3323 3324 3325 3326 3327 3328 3329 3330 3331 3332 3333 3334 3335 3336 3337 3338 3339 3340 3341 3342 3343 3344 3345 3346 3347 3348 3349 3350 3351 3352 3353 3354 3355 3356 3357 3358 3359 3360 3361 3362 3363 3364 3365 3366 3367 3368 3369 3370 3371 3372 3373 3374 3375 3376 3377 3378 3379 3380 3381 3382 3383 3384 3385 3386 3387 3388 3389 3390 3391 3392 3393 3394 3395 3396 3397 3398 3399 3400 3401 3402 3403 3404 3405 3406 3407 3408 3409 3410 3411 3412 3413 3414 3415 3416 3417 3418 3419 3420 3421 3422 3423 3424 3425 3426 3427 3428 3429 3430 3431 3432 3433 3434 3435 3436 3437 3438 3439 3440 3441 3442 3443 3444 3445 3446 3447 3448 3449 3450 3451 3452 3453 3454 3455 3456 3457 3458 3459 3460 3461 3462 3463 3464 3465 3466 3467 3468 3469 3470 3471 3472 3473 3474 3475 3476 3477 3478 3479 3480 3481 3482 3483 3484 3485 3486 3487 3488 3489 3490 3491 3492 3493 3494 3495 3496 3497 3498 3499 3500 3501 3502 3503 3504 3505 3506 3507 3508 3509 3510 3511 3512 3513 3514 3515 3516 3517 3518 3519 3520 3521 3522 3523 3524 3525 3526 3527 3528 3529 3530 3531 3532 3533 3534 3535 3536 3537 3538 3539 3540 3541 3542 3543 3544 3545 3546 3547 3548 3549 3550 3551 3552 3553 3554 3555 3556 3557 3558 3559 3560 3561 3562 3563 3564 3565 3566 3567 3568 3569 3570 3571 3572 3573 3574 3575 3576 3577 3578 3579 3580 3581 3582 3583 3584 3585 3586 3587 3588 3589 3590 3591 3592 3593 3594 3595 3596 3597 3598 3599 3600 3601 3602 3603 3604 3605 3606 3607 3608 3609 3610 3611 3612 3613 3614 3615 3616 3617 3618 3619 3620 3621 3622 3623 3624 3625 3626 3627 3628 3629 3630 3631 3632 3633 3634 3635 3636 3637 3638 3639 3640 3641 3642 3643 3644 3645 3646 3647 3648 3649 3650 3651 3652 3653 3654 3655 3656 3657 3658 3659 3660 3661 3662 3663 3664 3665 3666 3667 3668 3669 3670 3671 3672 3673 3674 3675 3676 3677 3678 3679 3680 3681 3682 3683 3684 3685 3686 3687 3688 3689 3690 3691 3692 3693 3694 3695 3696 3697 3698 3699 3700 3701 3702 3703 3704 3705 3706 3707 3708 3709 3710 3711 3712 3713 3714 3715 3716 3717 3718 3719 3720 3721 3722 3723 3724 3725 3726 3727 3728 3729 3730 3731 3732 3733 3734 3735 3736 3737 3738 3739 3740 3741 3742 3743 3744 3745 3746 3747 3748 3749 3750 3751 3752 3753 3754 3755 3756 3757 3758 3759 3760 3761 3762 3763 3764 3765 3766 3767 3768 3769 3770 3771 3772 3773 3774 3775 3776 3777 3778 3779 3780 3781 3782 3783 3784 3785 3786 3787 3788 3789 3790 3791 3792 3793 3794 3795 3796 3797 3798 3799 3800 3801 3802 3803 3804 3805 3806 3807 3808 3809 3810 3811 3812 3813 3814 3815 3816 3817 3818 3819 3820 3821 3822 3823 3824 3825 3826 3827 3828 3829 3830 3831 3832 3833 3834 3835 3836 3837 3838 3839 3840 3841 3842 3843 3844 3845 3846 3847 3848 3849 3850 3851 3852 3853 3854 3855 3856 3857 3858 3859 3860 3861 3862 3863 3864 3865 3866 3867 3868 3869 3870 3871 3872 3873 3874 3875 3876 3877 3878 3879 3880 3881 3882 3883 3884 3885 3886 3887 3888 3889 3890 3891 3892 3893 3894 3895 3896 3897 3898 3899 3900 3901 3902 3903 3904 3905 3906 3907 3908 3909 3910 3911 3912 3913 3914 3915 3916 3917 3918 3919 3920 3921 3922 3923 3924 3925 3926 3927 3928 3929 3930 3931 3932 3933 3934 3935 3936 3937 3938 3939 3940 3941 3942 3943 3944 3945 3946 3947 3948 3949 3950 3951 3952 3953 3954 3955 3956 3957 3958 3959 3960 3961 3962 3963 3964 3965 3966 3967 3968 3969 3970 3971 3972 3973 3974 3975 3976 3977 3978 3979 3980 3981 3982 3983 3984 3985 3986 3987 3988 3989 3990 3991 3992 3993 3994 3995 3996 3997 3998 3999 4000 4001 4002 4003 4004 4005 4006 4007 4008 4009 4010 4011 4012 4013 4014 4015 4016 4017 4018 4019 4020 4021 4022 4023 4024 4025 4026 4027 4028 4029 4030 4031 4032 4033 4034 4035 4036 4037 4038 4039 4040 4041 4042 4043 4044 4045 4046 4047 4048 4049 4050 4051 4052 4053 4054 4055 4056 4057 4058 4059 4060 | // SPDX-License-Identifier: GPL-2.0-or-later /* * * Linux MegaRAID device driver * * Copyright (c) 2003-2004 LSI Logic Corporation. * * FILE : megaraid_mbox.c * Version : v2.20.5.1 (Nov 16 2006) * * Authors: * Atul Mukker <Atul.Mukker@lsi.com> * Sreenivas Bagalkote <Sreenivas.Bagalkote@lsi.com> * Manoj Jose <Manoj.Jose@lsi.com> * Seokmann Ju * * List of supported controllers * * OEM Product Name VID DID SSVID SSID * --- ------------ --- --- ---- ---- * Dell PERC3/QC 101E 1960 1028 0471 * Dell PERC3/DC 101E 1960 1028 0493 * Dell PERC3/SC 101E 1960 1028 0475 * Dell PERC3/Di 1028 1960 1028 0123 * Dell PERC4/SC 1000 1960 1028 0520 * Dell PERC4/DC 1000 1960 1028 0518 * Dell PERC4/QC 1000 0407 1028 0531 * Dell PERC4/Di 1028 000F 1028 014A * Dell PERC 4e/Si 1028 0013 1028 016c * Dell PERC 4e/Di 1028 0013 1028 016d * Dell PERC 4e/Di 1028 0013 1028 016e * Dell PERC 4e/Di 1028 0013 1028 016f * Dell PERC 4e/Di 1028 0013 1028 0170 * Dell PERC 4e/DC 1000 0408 1028 0002 * Dell PERC 4e/SC 1000 0408 1028 0001 * * LSI MegaRAID SCSI 320-0 1000 1960 1000 A520 * LSI MegaRAID SCSI 320-1 1000 1960 1000 0520 * LSI MegaRAID SCSI 320-2 1000 1960 1000 0518 * LSI MegaRAID SCSI 320-0X 1000 0407 1000 0530 * LSI MegaRAID SCSI 320-2X 1000 0407 1000 0532 * LSI MegaRAID SCSI 320-4X 1000 0407 1000 0531 * LSI MegaRAID SCSI 320-1E 1000 0408 1000 0001 * LSI MegaRAID SCSI 320-2E 1000 0408 1000 0002 * LSI MegaRAID SATA 150-4 1000 1960 1000 4523 * LSI MegaRAID SATA 150-6 1000 1960 1000 0523 * LSI MegaRAID SATA 300-4X 1000 0409 1000 3004 * LSI MegaRAID SATA 300-8X 1000 0409 1000 3008 * * INTEL RAID Controller SRCU42X 1000 0407 8086 0532 * INTEL RAID Controller SRCS16 1000 1960 8086 0523 * INTEL RAID Controller SRCU42E 1000 0408 8086 0002 * INTEL RAID Controller SRCZCRX 1000 0407 8086 0530 * INTEL RAID Controller SRCS28X 1000 0409 8086 3008 * INTEL RAID Controller SROMBU42E 1000 0408 8086 3431 * INTEL RAID Controller SROMBU42E 1000 0408 8086 3499 * INTEL RAID Controller SRCU51L 1000 1960 8086 0520 * * FSC MegaRAID PCI Express ROMB 1000 0408 1734 1065 * * ACER MegaRAID ROMB-2E 1000 0408 1025 004D * * NEC MegaRAID PCI Express ROMB 1000 0408 1033 8287 * * For history of changes, see Documentation/scsi/ChangeLog.megaraid */ #include <linux/slab.h> #include <linux/module.h> #include "megaraid_mbox.h" static int megaraid_init(void); static void megaraid_exit(void); static int megaraid_probe_one(struct pci_dev*, const struct pci_device_id *); static void megaraid_detach_one(struct pci_dev *); static void megaraid_mbox_shutdown(struct pci_dev *); static int megaraid_io_attach(adapter_t *); static void megaraid_io_detach(adapter_t *); static int megaraid_init_mbox(adapter_t *); static void megaraid_fini_mbox(adapter_t *); static int megaraid_alloc_cmd_packets(adapter_t *); static void megaraid_free_cmd_packets(adapter_t *); static int megaraid_mbox_setup_dma_pools(adapter_t *); static void megaraid_mbox_teardown_dma_pools(adapter_t *); static int megaraid_sysfs_alloc_resources(adapter_t *); static void megaraid_sysfs_free_resources(adapter_t *); static int megaraid_abort_handler(struct scsi_cmnd *); static int megaraid_reset_handler(struct scsi_cmnd *); static int mbox_post_sync_cmd(adapter_t *, uint8_t []); static int mbox_post_sync_cmd_fast(adapter_t *, uint8_t []); static int megaraid_busywait_mbox(mraid_device_t *); static int megaraid_mbox_product_info(adapter_t *); static int megaraid_mbox_extended_cdb(adapter_t *); static int megaraid_mbox_support_ha(adapter_t *, uint16_t *); static int megaraid_mbox_support_random_del(adapter_t *); static int megaraid_mbox_get_max_sg(adapter_t *); static void megaraid_mbox_enum_raid_scsi(adapter_t *); static void megaraid_mbox_flush_cache(adapter_t *); static int megaraid_mbox_fire_sync_cmd(adapter_t *); static void megaraid_mbox_display_scb(adapter_t *, scb_t *); static void megaraid_mbox_setup_device_map(adapter_t *); static int megaraid_queue_command(struct Scsi_Host *, struct scsi_cmnd *); static scb_t *megaraid_mbox_build_cmd(adapter_t *, struct scsi_cmnd *, int *); static void megaraid_mbox_runpendq(adapter_t *, scb_t *); static void megaraid_mbox_prepare_pthru(adapter_t *, scb_t *, struct scsi_cmnd *); static void megaraid_mbox_prepare_epthru(adapter_t *, scb_t *, struct scsi_cmnd *); static irqreturn_t megaraid_isr(int, void *); static void megaraid_mbox_dpc(unsigned long); static ssize_t megaraid_mbox_app_hndl_show(struct device *, struct device_attribute *attr, char *); static ssize_t megaraid_mbox_ld_show(struct device *, struct device_attribute *attr, char *); static int megaraid_cmm_register(adapter_t *); static int megaraid_cmm_unregister(adapter_t *); static int megaraid_mbox_mm_handler(unsigned long, uioc_t *, uint32_t); static int megaraid_mbox_mm_command(adapter_t *, uioc_t *); static void megaraid_mbox_mm_done(adapter_t *, scb_t *); static int gather_hbainfo(adapter_t *, mraid_hba_info_t *); static int wait_till_fw_empty(adapter_t *); MODULE_AUTHOR("megaraidlinux@lsi.com"); MODULE_DESCRIPTION("LSI Logic MegaRAID Mailbox Driver"); MODULE_LICENSE("GPL"); MODULE_VERSION(MEGARAID_VERSION); /* * ### modules parameters for driver ### */ /* * Set to enable driver to expose unconfigured disk to kernel */ static int megaraid_expose_unconf_disks = 0; module_param_named(unconf_disks, megaraid_expose_unconf_disks, int, 0); MODULE_PARM_DESC(unconf_disks, "Set to expose unconfigured disks to kernel (default=0)"); /* * driver wait time if the adapter's mailbox is busy */ static unsigned int max_mbox_busy_wait = MBOX_BUSY_WAIT; module_param_named(busy_wait, max_mbox_busy_wait, int, 0); MODULE_PARM_DESC(busy_wait, "Max wait for mailbox in microseconds if busy (default=10)"); /* * number of sectors per IO command */ static unsigned int megaraid_max_sectors = MBOX_MAX_SECTORS; module_param_named(max_sectors, megaraid_max_sectors, int, 0); MODULE_PARM_DESC(max_sectors, "Maximum number of sectors per IO command (default=128)"); /* * number of commands per logical unit */ static unsigned int megaraid_cmd_per_lun = MBOX_DEF_CMD_PER_LUN; module_param_named(cmd_per_lun, megaraid_cmd_per_lun, int, 0); MODULE_PARM_DESC(cmd_per_lun, "Maximum number of commands per logical unit (default=64)"); /* * Fast driver load option, skip scanning for physical devices during load. * This would result in non-disk devices being skipped during driver load * time. These can be later added though, using /proc/scsi/scsi */ static unsigned int megaraid_fast_load; module_param_named(fast_load, megaraid_fast_load, int, 0); MODULE_PARM_DESC(fast_load, "Faster loading of the driver, skips physical devices! (default=0)"); /* * mraid_debug level - threshold for amount of information to be displayed by * the driver. This level can be changed through modules parameters, ioctl or * sysfs/proc interface. By default, print the announcement messages only. */ int mraid_debug_level = CL_ANN; module_param_named(debug_level, mraid_debug_level, int, 0); MODULE_PARM_DESC(debug_level, "Debug level for driver (default=0)"); /* * PCI table for all supported controllers. */ static struct pci_device_id pci_id_table_g[] = { { PCI_VENDOR_ID_DELL, PCI_DEVICE_ID_PERC4_DI_DISCOVERY, PCI_VENDOR_ID_DELL, PCI_SUBSYS_ID_PERC4_DI_DISCOVERY, }, { PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_PERC4_SC, PCI_VENDOR_ID_DELL, PCI_SUBSYS_ID_PERC4_SC, }, { PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_PERC4_DC, PCI_VENDOR_ID_DELL, PCI_SUBSYS_ID_PERC4_DC, }, { PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_VERDE, PCI_ANY_ID, PCI_ANY_ID, }, { PCI_VENDOR_ID_DELL, PCI_DEVICE_ID_PERC4_DI_EVERGLADES, PCI_VENDOR_ID_DELL, PCI_SUBSYS_ID_PERC4_DI_EVERGLADES, }, { PCI_VENDOR_ID_DELL, PCI_DEVICE_ID_PERC4E_SI_BIGBEND, PCI_VENDOR_ID_DELL, PCI_SUBSYS_ID_PERC4E_SI_BIGBEND, }, { PCI_VENDOR_ID_DELL, PCI_DEVICE_ID_PERC4E_DI_KOBUK, PCI_VENDOR_ID_DELL, PCI_SUBSYS_ID_PERC4E_DI_KOBUK, }, { PCI_VENDOR_ID_DELL, PCI_DEVICE_ID_PERC4E_DI_CORVETTE, PCI_VENDOR_ID_DELL, PCI_SUBSYS_ID_PERC4E_DI_CORVETTE, }, { PCI_VENDOR_ID_DELL, PCI_DEVICE_ID_PERC4E_DI_EXPEDITION, PCI_VENDOR_ID_DELL, PCI_SUBSYS_ID_PERC4E_DI_EXPEDITION, }, { PCI_VENDOR_ID_DELL, PCI_DEVICE_ID_PERC4E_DI_GUADALUPE, PCI_VENDOR_ID_DELL, PCI_SUBSYS_ID_PERC4E_DI_GUADALUPE, }, { PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_DOBSON, PCI_ANY_ID, PCI_ANY_ID, }, { PCI_VENDOR_ID_AMI, PCI_DEVICE_ID_AMI_MEGARAID3, PCI_ANY_ID, PCI_ANY_ID, }, { PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_AMI_MEGARAID3, PCI_ANY_ID, PCI_ANY_ID, }, { PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LINDSAY, PCI_ANY_ID, PCI_ANY_ID, }, {0} /* Terminating entry */ }; MODULE_DEVICE_TABLE(pci, pci_id_table_g); static struct pci_driver megaraid_pci_driver = { .name = "megaraid", .id_table = pci_id_table_g, .probe = megaraid_probe_one, .remove = megaraid_detach_one, .shutdown = megaraid_mbox_shutdown, }; // definitions for the device attributes for exporting logical drive number // for a scsi address (Host, Channel, Id, Lun) static DEVICE_ATTR_ADMIN_RO(megaraid_mbox_app_hndl); // Host template initializer for megaraid mbox sysfs device attributes static struct attribute *megaraid_shost_attrs[] = { &dev_attr_megaraid_mbox_app_hndl.attr, NULL, }; ATTRIBUTE_GROUPS(megaraid_shost); static DEVICE_ATTR_ADMIN_RO(megaraid_mbox_ld); // Host template initializer for megaraid mbox sysfs device attributes static struct attribute *megaraid_sdev_attrs[] = { &dev_attr_megaraid_mbox_ld.attr, NULL, }; ATTRIBUTE_GROUPS(megaraid_sdev); /* * Scsi host template for megaraid unified driver */ static const struct scsi_host_template megaraid_template_g = { .module = THIS_MODULE, .name = "LSI Logic MegaRAID driver", .proc_name = "megaraid", .queuecommand = megaraid_queue_command, .eh_abort_handler = megaraid_abort_handler, .eh_host_reset_handler = megaraid_reset_handler, .change_queue_depth = scsi_change_queue_depth, .no_write_same = 1, .sdev_groups = megaraid_sdev_groups, .shost_groups = megaraid_shost_groups, }; /** * megaraid_init - module load hook * * We register ourselves as hotplug enabled module and let PCI subsystem * discover our adapters. */ static int __init megaraid_init(void) { int rval; // Announce the driver version con_log(CL_ANN, (KERN_INFO "megaraid: %s %s\n", MEGARAID_VERSION, MEGARAID_EXT_VERSION)); // check validity of module parameters if (megaraid_cmd_per_lun > MBOX_MAX_SCSI_CMDS) { con_log(CL_ANN, (KERN_WARNING "megaraid mailbox: max commands per lun reset to %d\n", MBOX_MAX_SCSI_CMDS)); megaraid_cmd_per_lun = MBOX_MAX_SCSI_CMDS; } // register as a PCI hot-plug driver module rval = pci_register_driver(&megaraid_pci_driver); if (rval < 0) { con_log(CL_ANN, (KERN_WARNING "megaraid: could not register hotplug support.\n")); } return rval; } /** * megaraid_exit - driver unload entry point * * We simply unwrap the megaraid_init routine here. */ static void __exit megaraid_exit(void) { con_log(CL_DLEVEL1, (KERN_NOTICE "megaraid: unloading framework\n")); // unregister as PCI hotplug driver pci_unregister_driver(&megaraid_pci_driver); return; } /** * megaraid_probe_one - PCI hotplug entry point * @pdev : handle to this controller's PCI configuration space * @id : pci device id of the class of controllers * * This routine should be called whenever a new adapter is detected by the * PCI hotplug susbsystem. */ static int megaraid_probe_one(struct pci_dev *pdev, const struct pci_device_id *id) { adapter_t *adapter; // detected a new controller con_log(CL_ANN, (KERN_INFO "megaraid: probe new device %#4.04x:%#4.04x:%#4.04x:%#4.04x: ", pdev->vendor, pdev->device, pdev->subsystem_vendor, pdev->subsystem_device)); con_log(CL_ANN, ("bus %d:slot %d:func %d\n", pdev->bus->number, PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn))); if (pci_enable_device(pdev)) { con_log(CL_ANN, (KERN_WARNING "megaraid: pci_enable_device failed\n")); return -ENODEV; } // Enable bus-mastering on this controller pci_set_master(pdev); // Allocate the per driver initialization structure adapter = kzalloc(sizeof(adapter_t), GFP_KERNEL); if (adapter == NULL) { con_log(CL_ANN, (KERN_WARNING "megaraid: out of memory, %s %d.\n", __func__, __LINE__)); goto out_probe_one; } // set up PCI related soft state and other pre-known parameters adapter->unique_id = pci_dev_id(pdev); adapter->irq = pdev->irq; adapter->pdev = pdev; atomic_set(&adapter->being_detached, 0); // Setup the default DMA mask. This would be changed later on // depending on hardware capabilities if (dma_set_mask(&adapter->pdev->dev, DMA_BIT_MASK(32))) { con_log(CL_ANN, (KERN_WARNING "megaraid: dma_set_mask failed:%d\n", __LINE__)); goto out_free_adapter; } // Initialize the synchronization lock for kernel and LLD spin_lock_init(&adapter->lock); // Initialize the command queues: the list of free SCBs and the list // of pending SCBs. INIT_LIST_HEAD(&adapter->kscb_pool); spin_lock_init(SCSI_FREE_LIST_LOCK(adapter)); INIT_LIST_HEAD(&adapter->pend_list); spin_lock_init(PENDING_LIST_LOCK(adapter)); INIT_LIST_HEAD(&adapter->completed_list); spin_lock_init(COMPLETED_LIST_LOCK(adapter)); // Start the mailbox based controller if (megaraid_init_mbox(adapter) != 0) { con_log(CL_ANN, (KERN_WARNING "megaraid: mailbox adapter did not initialize\n")); goto out_free_adapter; } // Register with LSI Common Management Module if (megaraid_cmm_register(adapter) != 0) { con_log(CL_ANN, (KERN_WARNING "megaraid: could not register with management module\n")); goto out_fini_mbox; } // setup adapter handle in PCI soft state pci_set_drvdata(pdev, adapter); // attach with scsi mid-layer if (megaraid_io_attach(adapter) != 0) { con_log(CL_ANN, (KERN_WARNING "megaraid: io attach failed\n")); goto out_cmm_unreg; } return 0; out_cmm_unreg: megaraid_cmm_unregister(adapter); out_fini_mbox: megaraid_fini_mbox(adapter); out_free_adapter: kfree(adapter); out_probe_one: pci_disable_device(pdev); return -ENODEV; } /** * megaraid_detach_one - release framework resources and call LLD release routine * @pdev : handle for our PCI configuration space * * This routine is called during driver unload. We free all the allocated * resources and call the corresponding LLD so that it can also release all * its resources. * * This routine is also called from the PCI hotplug system. */ static void megaraid_detach_one(struct pci_dev *pdev) { adapter_t *adapter; struct Scsi_Host *host; // Start a rollback on this adapter adapter = pci_get_drvdata(pdev); if (!adapter) { con_log(CL_ANN, (KERN_CRIT "megaraid: Invalid detach on %#4.04x:%#4.04x:%#4.04x:%#4.04x\n", pdev->vendor, pdev->device, pdev->subsystem_vendor, pdev->subsystem_device)); return; } else { con_log(CL_ANN, (KERN_NOTICE "megaraid: detaching device %#4.04x:%#4.04x:%#4.04x:%#4.04x\n", pdev->vendor, pdev->device, pdev->subsystem_vendor, pdev->subsystem_device)); } host = adapter->host; // do not allow any more requests from the management module for this // adapter. // FIXME: How do we account for the request which might still be // pending with us? atomic_set(&adapter->being_detached, 1); // detach from the IO sub-system megaraid_io_detach(adapter); // Unregister from common management module // // FIXME: this must return success or failure for conditions if there // is a command pending with LLD or not. megaraid_cmm_unregister(adapter); // finalize the mailbox based controller and release all resources megaraid_fini_mbox(adapter); kfree(adapter); scsi_host_put(host); pci_disable_device(pdev); return; } /** * megaraid_mbox_shutdown - PCI shutdown for megaraid HBA * @pdev : generic driver model device * * Shutdown notification, perform flush cache. */ static void megaraid_mbox_shutdown(struct pci_dev *pdev) { adapter_t *adapter = pci_get_drvdata(pdev); static int counter; if (!adapter) { con_log(CL_ANN, (KERN_WARNING "megaraid: null device in shutdown\n")); return; } // flush caches now con_log(CL_ANN, (KERN_INFO "megaraid: flushing adapter %d...", counter++)); megaraid_mbox_flush_cache(adapter); con_log(CL_ANN, ("done\n")); } /** * megaraid_io_attach - attach a device with the IO subsystem * @adapter : controller's soft state * * Attach this device with the IO subsystem. */ static int megaraid_io_attach(adapter_t *adapter) { struct Scsi_Host *host; // Initialize SCSI Host structure host = scsi_host_alloc(&megaraid_template_g, 8); if (!host) { con_log(CL_ANN, (KERN_WARNING "megaraid mbox: scsi_register failed\n")); return -1; } SCSIHOST2ADAP(host) = (caddr_t)adapter; adapter->host = host; host->irq = adapter->irq; host->unique_id = adapter->unique_id; host->can_queue = adapter->max_cmds; host->this_id = adapter->init_id; host->sg_tablesize = adapter->sglen; host->max_sectors = adapter->max_sectors; host->cmd_per_lun = adapter->cmd_per_lun; host->max_channel = adapter->max_channel; host->max_id = adapter->max_target; host->max_lun = adapter->max_lun; // notify mid-layer about the new controller if (scsi_add_host(host, &adapter->pdev->dev)) { con_log(CL_ANN, (KERN_WARNING "megaraid mbox: scsi_add_host failed\n")); scsi_host_put(host); return -1; } scsi_scan_host(host); return 0; } /** * megaraid_io_detach - detach a device from the IO subsystem * @adapter : controller's soft state * * Detach this device from the IO subsystem. */ static void megaraid_io_detach(adapter_t *adapter) { struct Scsi_Host *host; con_log(CL_DLEVEL1, (KERN_INFO "megaraid: io detach\n")); host = adapter->host; scsi_remove_host(host); return; } /* * START: Mailbox Low Level Driver * * This is section specific to the single mailbox based controllers */ /** * megaraid_init_mbox - initialize controller * @adapter : our soft state * * - Allocate 16-byte aligned mailbox memory for firmware handshake * - Allocate controller's memory resources * - Find out all initialization data * - Allocate memory required for all the commands * - Use internal library of FW routines, build up complete soft state */ static int megaraid_init_mbox(adapter_t *adapter) { struct pci_dev *pdev; mraid_device_t *raid_dev; int i; uint32_t magic64; adapter->ito = MBOX_TIMEOUT; pdev = adapter->pdev; /* * Allocate and initialize the init data structure for mailbox * controllers */ raid_dev = kzalloc(sizeof(mraid_device_t), GFP_KERNEL); if (raid_dev == NULL) return -1; /* * Attach the adapter soft state to raid device soft state */ adapter->raid_device = (caddr_t)raid_dev; raid_dev->fast_load = megaraid_fast_load; // our baseport raid_dev->baseport = pci_resource_start(pdev, 0); if (pci_request_regions(pdev, "MegaRAID: LSI Logic Corporation") != 0) { con_log(CL_ANN, (KERN_WARNING "megaraid: mem region busy\n")); goto out_free_raid_dev; } raid_dev->baseaddr = ioremap(raid_dev->baseport, 128); if (!raid_dev->baseaddr) { con_log(CL_ANN, (KERN_WARNING "megaraid: could not map hba memory\n") ); goto out_release_regions; } /* initialize the mutual exclusion lock for the mailbox */ spin_lock_init(&raid_dev->mailbox_lock); /* allocate memory required for commands */ if (megaraid_alloc_cmd_packets(adapter) != 0) goto out_iounmap; /* * Issue SYNC cmd to flush the pending cmds in the adapter * and initialize its internal state */ if (megaraid_mbox_fire_sync_cmd(adapter)) con_log(CL_ANN, ("megaraid: sync cmd failed\n")); /* * Setup the rest of the soft state using the library of * FW routines */ /* request IRQ and register the interrupt service routine */ if (request_irq(adapter->irq, megaraid_isr, IRQF_SHARED, "megaraid", adapter)) { con_log(CL_ANN, (KERN_WARNING "megaraid: Couldn't register IRQ %d!\n", adapter->irq)); goto out_alloc_cmds; } // Product info if (megaraid_mbox_product_info(adapter) != 0) goto out_free_irq; // Do we support extended CDBs adapter->max_cdb_sz = 10; if (megaraid_mbox_extended_cdb(adapter) == 0) { adapter->max_cdb_sz = 16; } /* * Do we support cluster environment, if we do, what is the initiator * id. * NOTE: In a non-cluster aware firmware environment, the LLD should * return 7 as initiator id. */ adapter->ha = 0; adapter->init_id = -1; if (megaraid_mbox_support_ha(adapter, &adapter->init_id) == 0) { adapter->ha = 1; } /* * Prepare the device ids array to have the mapping between the kernel * device address and megaraid device address. * We export the physical devices on their actual addresses. The * logical drives are exported on a virtual SCSI channel */ megaraid_mbox_setup_device_map(adapter); // If the firmware supports random deletion, update the device id map if (megaraid_mbox_support_random_del(adapter)) { // Change the logical drives numbers in device_ids array one // slot in device_ids is reserved for target id, that's why // "<=" below for (i = 0; i <= MAX_LOGICAL_DRIVES_40LD; i++) { adapter->device_ids[adapter->max_channel][i] += 0x80; } adapter->device_ids[adapter->max_channel][adapter->init_id] = 0xFF; raid_dev->random_del_supported = 1; } /* * find out the maximum number of scatter-gather elements supported by * this firmware */ adapter->sglen = megaraid_mbox_get_max_sg(adapter); // enumerate RAID and SCSI channels so that all devices on SCSI // channels can later be exported, including disk devices megaraid_mbox_enum_raid_scsi(adapter); /* * Other parameters required by upper layer * * maximum number of sectors per IO command */ adapter->max_sectors = megaraid_max_sectors; /* * number of queued commands per LUN. */ adapter->cmd_per_lun = megaraid_cmd_per_lun; /* * Allocate resources required to issue FW calls, when sysfs is * accessed */ if (megaraid_sysfs_alloc_resources(adapter) != 0) goto out_free_irq; // Set the DMA mask to 64-bit. All supported controllers as capable of // DMA in this range pci_read_config_dword(adapter->pdev, PCI_CONF_AMISIG64, &magic64); if (((magic64 == HBA_SIGNATURE_64_BIT) && ((adapter->pdev->subsystem_device != PCI_SUBSYS_ID_MEGARAID_SATA_150_6) && (adapter->pdev->subsystem_device != PCI_SUBSYS_ID_MEGARAID_SATA_150_4))) || (adapter->pdev->vendor == PCI_VENDOR_ID_LSI_LOGIC && adapter->pdev->device == PCI_DEVICE_ID_VERDE) || (adapter->pdev->vendor == PCI_VENDOR_ID_LSI_LOGIC && adapter->pdev->device == PCI_DEVICE_ID_DOBSON) || (adapter->pdev->vendor == PCI_VENDOR_ID_LSI_LOGIC && adapter->pdev->device == PCI_DEVICE_ID_LINDSAY) || (adapter->pdev->vendor == PCI_VENDOR_ID_DELL && adapter->pdev->device == PCI_DEVICE_ID_PERC4_DI_EVERGLADES) || (adapter->pdev->vendor == PCI_VENDOR_ID_DELL && adapter->pdev->device == PCI_DEVICE_ID_PERC4E_DI_KOBUK)) { if (dma_set_mask(&adapter->pdev->dev, DMA_BIT_MASK(64))) { con_log(CL_ANN, (KERN_WARNING "megaraid: DMA mask for 64-bit failed\n")); if (dma_set_mask(&adapter->pdev->dev, DMA_BIT_MASK(32))) { con_log(CL_ANN, (KERN_WARNING "megaraid: 32-bit DMA mask failed\n")); goto out_free_sysfs_res; } } } // setup tasklet for DPC tasklet_init(&adapter->dpc_h, megaraid_mbox_dpc, (unsigned long)adapter); con_log(CL_DLEVEL1, (KERN_INFO "megaraid mbox hba successfully initialized\n")); return 0; out_free_sysfs_res: megaraid_sysfs_free_resources(adapter); out_free_irq: free_irq(adapter->irq, adapter); out_alloc_cmds: megaraid_free_cmd_packets(adapter); out_iounmap: iounmap(raid_dev->baseaddr); out_release_regions: pci_release_regions(pdev); out_free_raid_dev: kfree(raid_dev); return -1; } /** * megaraid_fini_mbox - undo controller initialization * @adapter : our soft state */ static void megaraid_fini_mbox(adapter_t *adapter) { mraid_device_t *raid_dev = ADAP2RAIDDEV(adapter); // flush all caches megaraid_mbox_flush_cache(adapter); tasklet_kill(&adapter->dpc_h); megaraid_sysfs_free_resources(adapter); megaraid_free_cmd_packets(adapter); free_irq(adapter->irq, adapter); iounmap(raid_dev->baseaddr); pci_release_regions(adapter->pdev); kfree(raid_dev); return; } /** * megaraid_alloc_cmd_packets - allocate shared mailbox * @adapter : soft state of the raid controller * * Allocate and align the shared mailbox. This mailbox is used to issue * all the commands. For IO based controllers, the mailbox is also registered * with the FW. Allocate memory for all commands as well. * This is our big allocator. */ static int megaraid_alloc_cmd_packets(adapter_t *adapter) { mraid_device_t *raid_dev = ADAP2RAIDDEV(adapter); struct pci_dev *pdev; unsigned long align; scb_t *scb; mbox_ccb_t *ccb; struct mraid_pci_blk *epthru_pci_blk; struct mraid_pci_blk *sg_pci_blk; struct mraid_pci_blk *mbox_pci_blk; int i; pdev = adapter->pdev; /* * Setup the mailbox * Allocate the common 16-byte aligned memory for the handshake * mailbox. */ raid_dev->una_mbox64 = dma_alloc_coherent(&adapter->pdev->dev, sizeof(mbox64_t), &raid_dev->una_mbox64_dma, GFP_KERNEL); if (!raid_dev->una_mbox64) { con_log(CL_ANN, (KERN_WARNING "megaraid: out of memory, %s %d\n", __func__, __LINE__)); return -1; } /* * Align the mailbox at 16-byte boundary */ raid_dev->mbox = &raid_dev->una_mbox64->mbox32; raid_dev->mbox = (mbox_t *)((((unsigned long)raid_dev->mbox) + 15) & (~0UL ^ 0xFUL)); raid_dev->mbox64 = (mbox64_t *)(((unsigned long)raid_dev->mbox) - 8); align = ((void *)raid_dev->mbox - ((void *)&raid_dev->una_mbox64->mbox32)); raid_dev->mbox_dma = (unsigned long)raid_dev->una_mbox64_dma + 8 + align; // Allocate memory for commands issued internally adapter->ibuf = dma_alloc_coherent(&pdev->dev, MBOX_IBUF_SIZE, &adapter->ibuf_dma_h, GFP_KERNEL); if (!adapter->ibuf) { con_log(CL_ANN, (KERN_WARNING "megaraid: out of memory, %s %d\n", __func__, __LINE__)); goto out_free_common_mbox; } // Allocate memory for our SCSI Command Blocks and their associated // memory /* * Allocate memory for the base list of scb. Later allocate memory for * CCBs and embedded components of each CCB and point the pointers in * scb to the allocated components * NOTE: The code to allocate SCB will be duplicated in all the LLD * since the calling routine does not yet know the number of available * commands. */ adapter->kscb_list = kcalloc(MBOX_MAX_SCSI_CMDS, sizeof(scb_t), GFP_KERNEL); if (adapter->kscb_list == NULL) { con_log(CL_ANN, (KERN_WARNING "megaraid: out of memory, %s %d\n", __func__, __LINE__)); goto out_free_ibuf; } // memory allocation for our command packets if (megaraid_mbox_setup_dma_pools(adapter) != 0) { con_log(CL_ANN, (KERN_WARNING "megaraid: out of memory, %s %d\n", __func__, __LINE__)); goto out_free_scb_list; } // Adjust the scb pointers and link in the free pool epthru_pci_blk = raid_dev->epthru_pool; sg_pci_blk = raid_dev->sg_pool; mbox_pci_blk = raid_dev->mbox_pool; for (i = 0; i < MBOX_MAX_SCSI_CMDS; i++) { scb = adapter->kscb_list + i; ccb = raid_dev->ccb_list + i; ccb->mbox = (mbox_t *)(mbox_pci_blk[i].vaddr + 16); ccb->raw_mbox = (uint8_t *)ccb->mbox; ccb->mbox64 = (mbox64_t *)(mbox_pci_blk[i].vaddr + 8); ccb->mbox_dma_h = (unsigned long)mbox_pci_blk[i].dma_addr + 16; // make sure the mailbox is aligned properly if (ccb->mbox_dma_h & 0x0F) { con_log(CL_ANN, (KERN_CRIT "megaraid mbox: not aligned on 16-bytes\n")); goto out_teardown_dma_pools; } ccb->epthru = (mraid_epassthru_t *) epthru_pci_blk[i].vaddr; ccb->epthru_dma_h = epthru_pci_blk[i].dma_addr; ccb->pthru = (mraid_passthru_t *)ccb->epthru; ccb->pthru_dma_h = ccb->epthru_dma_h; ccb->sgl64 = (mbox_sgl64 *)sg_pci_blk[i].vaddr; ccb->sgl_dma_h = sg_pci_blk[i].dma_addr; ccb->sgl32 = (mbox_sgl32 *)ccb->sgl64; scb->ccb = (caddr_t)ccb; scb->gp = 0; scb->sno = i; // command index scb->scp = NULL; scb->state = SCB_FREE; scb->dma_direction = DMA_NONE; scb->dma_type = MRAID_DMA_NONE; scb->dev_channel = -1; scb->dev_target = -1; // put scb in the free pool list_add_tail(&scb->list, &adapter->kscb_pool); } return 0; out_teardown_dma_pools: megaraid_mbox_teardown_dma_pools(adapter); out_free_scb_list: kfree(adapter->kscb_list); out_free_ibuf: dma_free_coherent(&pdev->dev, MBOX_IBUF_SIZE, (void *)adapter->ibuf, adapter->ibuf_dma_h); out_free_common_mbox: dma_free_coherent(&adapter->pdev->dev, sizeof(mbox64_t), (caddr_t)raid_dev->una_mbox64, raid_dev->una_mbox64_dma); return -1; } /** * megaraid_free_cmd_packets - free memory * @adapter : soft state of the raid controller * * Release memory resources allocated for commands. */ static void megaraid_free_cmd_packets(adapter_t *adapter) { mraid_device_t *raid_dev = ADAP2RAIDDEV(adapter); megaraid_mbox_teardown_dma_pools(adapter); kfree(adapter->kscb_list); dma_free_coherent(&adapter->pdev->dev, MBOX_IBUF_SIZE, (void *)adapter->ibuf, adapter->ibuf_dma_h); dma_free_coherent(&adapter->pdev->dev, sizeof(mbox64_t), (caddr_t)raid_dev->una_mbox64, raid_dev->una_mbox64_dma); return; } /** * megaraid_mbox_setup_dma_pools - setup dma pool for command packets * @adapter : HBA soft state * * Setup the dma pools for mailbox, passthru and extended passthru structures, * and scatter-gather lists. */ static int megaraid_mbox_setup_dma_pools(adapter_t *adapter) { mraid_device_t *raid_dev = ADAP2RAIDDEV(adapter); struct mraid_pci_blk *epthru_pci_blk; struct mraid_pci_blk *sg_pci_blk; struct mraid_pci_blk *mbox_pci_blk; int i; // Allocate memory for 16-bytes aligned mailboxes raid_dev->mbox_pool_handle = dma_pool_create("megaraid mbox pool", &adapter->pdev->dev, sizeof(mbox64_t) + 16, 16, 0); if (raid_dev->mbox_pool_handle == NULL) { goto fail_setup_dma_pool; } mbox_pci_blk = raid_dev->mbox_pool; for (i = 0; i < MBOX_MAX_SCSI_CMDS; i++) { mbox_pci_blk[i].vaddr = dma_pool_alloc( raid_dev->mbox_pool_handle, GFP_KERNEL, &mbox_pci_blk[i].dma_addr); if (!mbox_pci_blk[i].vaddr) { goto fail_setup_dma_pool; } } /* * Allocate memory for each embedded passthru strucuture pointer * Request for a 128 bytes aligned structure for each passthru command * structure * Since passthru and extended passthru commands are exclusive, they * share common memory pool. Passthru structures piggyback on memory * allocated to extended passthru since passthru is smaller of the two */ raid_dev->epthru_pool_handle = dma_pool_create("megaraid mbox pthru", &adapter->pdev->dev, sizeof(mraid_epassthru_t), 128, 0); if (raid_dev->epthru_pool_handle == NULL) { goto fail_setup_dma_pool; } epthru_pci_blk = raid_dev->epthru_pool; for (i = 0; i < MBOX_MAX_SCSI_CMDS; i++) { epthru_pci_blk[i].vaddr = dma_pool_alloc( raid_dev->epthru_pool_handle, GFP_KERNEL, &epthru_pci_blk[i].dma_addr); if (!epthru_pci_blk[i].vaddr) { goto fail_setup_dma_pool; } } // Allocate memory for each scatter-gather list. Request for 512 bytes // alignment for each sg list raid_dev->sg_pool_handle = dma_pool_create("megaraid mbox sg", &adapter->pdev->dev, sizeof(mbox_sgl64) * MBOX_MAX_SG_SIZE, 512, 0); if (raid_dev->sg_pool_handle == NULL) { goto fail_setup_dma_pool; } sg_pci_blk = raid_dev->sg_pool; for (i = 0; i < MBOX_MAX_SCSI_CMDS; i++) { sg_pci_blk[i].vaddr = dma_pool_alloc( raid_dev->sg_pool_handle, GFP_KERNEL, &sg_pci_blk[i].dma_addr); if (!sg_pci_blk[i].vaddr) { goto fail_setup_dma_pool; } } return 0; fail_setup_dma_pool: megaraid_mbox_teardown_dma_pools(adapter); return -1; } /** * megaraid_mbox_teardown_dma_pools - teardown dma pools for command packets * @adapter : HBA soft state * * Teardown the dma pool for mailbox, passthru and extended passthru * structures, and scatter-gather lists. */ static void megaraid_mbox_teardown_dma_pools(adapter_t *adapter) { mraid_device_t *raid_dev = ADAP2RAIDDEV(adapter); struct mraid_pci_blk *epthru_pci_blk; struct mraid_pci_blk *sg_pci_blk; struct mraid_pci_blk *mbox_pci_blk; int i; sg_pci_blk = raid_dev->sg_pool; for (i = 0; i < MBOX_MAX_SCSI_CMDS && sg_pci_blk[i].vaddr; i++) { dma_pool_free(raid_dev->sg_pool_handle, sg_pci_blk[i].vaddr, sg_pci_blk[i].dma_addr); } dma_pool_destroy(raid_dev->sg_pool_handle); epthru_pci_blk = raid_dev->epthru_pool; for (i = 0; i < MBOX_MAX_SCSI_CMDS && epthru_pci_blk[i].vaddr; i++) { dma_pool_free(raid_dev->epthru_pool_handle, epthru_pci_blk[i].vaddr, epthru_pci_blk[i].dma_addr); } dma_pool_destroy(raid_dev->epthru_pool_handle); mbox_pci_blk = raid_dev->mbox_pool; for (i = 0; i < MBOX_MAX_SCSI_CMDS && mbox_pci_blk[i].vaddr; i++) { dma_pool_free(raid_dev->mbox_pool_handle, mbox_pci_blk[i].vaddr, mbox_pci_blk[i].dma_addr); } dma_pool_destroy(raid_dev->mbox_pool_handle); return; } /** * megaraid_alloc_scb - detach and return a scb from the free list * @adapter : controller's soft state * @scp : pointer to the scsi command to be executed * * Return the scb from the head of the free list. %NULL if there are none * available. */ static scb_t * megaraid_alloc_scb(adapter_t *adapter, struct scsi_cmnd *scp) { struct list_head *head = &adapter->kscb_pool; scb_t *scb = NULL; unsigned long flags; // detach scb from free pool spin_lock_irqsave(SCSI_FREE_LIST_LOCK(adapter), flags); if (list_empty(head)) { spin_unlock_irqrestore(SCSI_FREE_LIST_LOCK(adapter), flags); return NULL; } scb = list_entry(head->next, scb_t, list); list_del_init(&scb->list); spin_unlock_irqrestore(SCSI_FREE_LIST_LOCK(adapter), flags); scb->state = SCB_ACTIVE; scb->scp = scp; scb->dma_type = MRAID_DMA_NONE; return scb; } /** * megaraid_dealloc_scb - return the scb to the free pool * @adapter : controller's soft state * @scb : scb to be freed * * Return the scb back to the free list of scbs. The caller must 'flush' the * SCB before calling us. E.g., performing pci_unamp and/or pci_sync etc. * NOTE NOTE: Make sure the scb is not on any list before calling this * routine. */ static inline void megaraid_dealloc_scb(adapter_t *adapter, scb_t *scb) { unsigned long flags; // put scb in the free pool scb->state = SCB_FREE; scb->scp = NULL; spin_lock_irqsave(SCSI_FREE_LIST_LOCK(adapter), flags); list_add(&scb->list, &adapter->kscb_pool); spin_unlock_irqrestore(SCSI_FREE_LIST_LOCK(adapter), flags); return; } /** * megaraid_mbox_mksgl - make the scatter-gather list * @adapter : controller's soft state * @scb : scsi control block * * Prepare the scatter-gather list. */ static int megaraid_mbox_mksgl(adapter_t *adapter, scb_t *scb) { struct scatterlist *sgl; mbox_ccb_t *ccb; struct scsi_cmnd *scp; int sgcnt; int i; scp = scb->scp; ccb = (mbox_ccb_t *)scb->ccb; sgcnt = scsi_dma_map(scp); BUG_ON(sgcnt < 0 || sgcnt > adapter->sglen); // no mapping required if no data to be transferred if (!sgcnt) return 0; scb->dma_type = MRAID_DMA_WSG; scsi_for_each_sg(scp, sgl, sgcnt, i) { ccb->sgl64[i].address = sg_dma_address(sgl); ccb->sgl64[i].length = sg_dma_len(sgl); } // Return count of SG nodes return sgcnt; } /** * mbox_post_cmd - issue a mailbox command * @adapter : controller's soft state * @scb : command to be issued * * Post the command to the controller if mailbox is available. */ static int mbox_post_cmd(adapter_t *adapter, scb_t *scb) { mraid_device_t *raid_dev = ADAP2RAIDDEV(adapter); mbox64_t *mbox64; mbox_t *mbox; mbox_ccb_t *ccb; unsigned long flags; unsigned int i = 0; ccb = (mbox_ccb_t *)scb->ccb; mbox = raid_dev->mbox; mbox64 = raid_dev->mbox64; /* * Check for busy mailbox. If it is, return failure - the caller * should retry later. */ spin_lock_irqsave(MAILBOX_LOCK(raid_dev), flags); if (unlikely(mbox->busy)) { do { udelay(1); i++; rmb(); } while(mbox->busy && (i < max_mbox_busy_wait)); if (mbox->busy) { spin_unlock_irqrestore(MAILBOX_LOCK(raid_dev), flags); return -1; } } // Copy this command's mailbox data into "adapter's" mailbox memcpy((caddr_t)mbox64, (caddr_t)ccb->mbox64, 22); mbox->cmdid = scb->sno; adapter->outstanding_cmds++; mbox->busy = 1; // Set busy mbox->poll = 0; mbox->ack = 0; wmb(); WRINDOOR(raid_dev, raid_dev->mbox_dma | 0x1); spin_unlock_irqrestore(MAILBOX_LOCK(raid_dev), flags); return 0; } /** * megaraid_queue_command_lck - generic queue entry point for all LLDs * @scp : pointer to the scsi command to be executed * * Queue entry point for mailbox based controllers. */ static int megaraid_queue_command_lck(struct scsi_cmnd *scp) { void (*done)(struct scsi_cmnd *) = scsi_done; adapter_t *adapter; scb_t *scb; int if_busy; adapter = SCP2ADAPTER(scp); scp->result = 0; /* * Allocate and build a SCB request * if_busy flag will be set if megaraid_mbox_build_cmd() command could * not allocate scb. We will return non-zero status in that case. * NOTE: scb can be null even though certain commands completed * successfully, e.g., MODE_SENSE and TEST_UNIT_READY, it would * return 0 in that case, and we would do the callback right away. */ if_busy = 0; scb = megaraid_mbox_build_cmd(adapter, scp, &if_busy); if (!scb) { // command already completed done(scp); return 0; } megaraid_mbox_runpendq(adapter, scb); return if_busy; } static DEF_SCSI_QCMD(megaraid_queue_command) /** * megaraid_mbox_build_cmd - transform the mid-layer scsi commands * @adapter : controller's soft state * @scp : mid-layer scsi command pointer * @busy : set if request could not be completed because of lack of * resources * * Transform the mid-layer scsi command to megaraid firmware lingua. * Convert the command issued by mid-layer to format understood by megaraid * firmware. We also complete certain commands without sending them to firmware. */ static scb_t * megaraid_mbox_build_cmd(adapter_t *adapter, struct scsi_cmnd *scp, int *busy) { mraid_device_t *rdev = ADAP2RAIDDEV(adapter); int channel; int target; int islogical; mbox_ccb_t *ccb; mraid_passthru_t *pthru; mbox64_t *mbox64; mbox_t *mbox; scb_t *scb; char skip[] = "skipping"; char scan[] = "scanning"; char *ss; /* * Get the appropriate device map for the device this command is * intended for */ MRAID_GET_DEVICE_MAP(adapter, scp, channel, target, islogical); /* * Logical drive commands */ if (islogical) { switch (scp->cmnd[0]) { case TEST_UNIT_READY: /* * Do we support clustering and is the support enabled * If no, return success always */ if (!adapter->ha) { scp->result = (DID_OK << 16); return NULL; } if (!(scb = megaraid_alloc_scb(adapter, scp))) { scp->result = (DID_ERROR << 16); *busy = 1; return NULL; } scb->dma_direction = scp->sc_data_direction; scb->dev_channel = 0xFF; scb->dev_target = target; ccb = (mbox_ccb_t *)scb->ccb; /* * The command id will be provided by the command * issuance routine */ ccb->raw_mbox[0] = CLUSTER_CMD; ccb->raw_mbox[2] = RESERVATION_STATUS; ccb->raw_mbox[3] = target; return scb; case MODE_SENSE: { struct scatterlist *sgl; caddr_t vaddr; sgl = scsi_sglist(scp); if (sg_page(sgl)) { vaddr = (caddr_t) sg_virt(&sgl[0]); memset(vaddr, 0, scp->cmnd[4]); } else { con_log(CL_ANN, (KERN_WARNING "megaraid mailbox: invalid sg:%d\n", __LINE__)); } } scp->result = (DID_OK << 16); return NULL; case INQUIRY: /* * Display the channel scan for logical drives * Do not display scan for a channel if already done. */ if (!(rdev->last_disp & (1L << SCP2CHANNEL(scp)))) { con_log(CL_ANN, (KERN_INFO "scsi[%d]: scanning scsi channel %d", adapter->host->host_no, SCP2CHANNEL(scp))); con_log(CL_ANN, ( " [virtual] for logical drives\n")); rdev->last_disp |= (1L << SCP2CHANNEL(scp)); } if (scp->cmnd[1] & MEGA_SCSI_INQ_EVPD) { scsi_build_sense(scp, 0, ILLEGAL_REQUEST, MEGA_INVALID_FIELD_IN_CDB, 0); return NULL; } fallthrough; case READ_CAPACITY: /* * Do not allow LUN > 0 for logical drives and * requests for more than 40 logical drives */ if (SCP2LUN(scp)) { scp->result = (DID_BAD_TARGET << 16); return NULL; } if ((target % 0x80) >= MAX_LOGICAL_DRIVES_40LD) { scp->result = (DID_BAD_TARGET << 16); return NULL; } /* Allocate a SCB and initialize passthru */ if (!(scb = megaraid_alloc_scb(adapter, scp))) { scp->result = (DID_ERROR << 16); *busy = 1; return NULL; } ccb = (mbox_ccb_t *)scb->ccb; scb->dev_channel = 0xFF; scb->dev_target = target; pthru = ccb->pthru; mbox = ccb->mbox; mbox64 = ccb->mbox64; pthru->timeout = 0; pthru->ars = 1; pthru->reqsenselen = 14; pthru->islogical = 1; pthru->logdrv = target; pthru->cdblen = scp->cmd_len; memcpy(pthru->cdb, scp->cmnd, scp->cmd_len); mbox->cmd = MBOXCMD_PASSTHRU64; scb->dma_direction = scp->sc_data_direction; pthru->dataxferlen = scsi_bufflen(scp); pthru->dataxferaddr = ccb->sgl_dma_h; pthru->numsge = megaraid_mbox_mksgl(adapter, scb); mbox->xferaddr = 0xFFFFFFFF; mbox64->xferaddr_lo = (uint32_t )ccb->pthru_dma_h; mbox64->xferaddr_hi = 0; return scb; case READ_6: case WRITE_6: case READ_10: case WRITE_10: case READ_12: case WRITE_12: /* * Allocate a SCB and initialize mailbox */ if (!(scb = megaraid_alloc_scb(adapter, scp))) { scp->result = (DID_ERROR << 16); *busy = 1; return NULL; } ccb = (mbox_ccb_t *)scb->ccb; scb->dev_channel = 0xFF; scb->dev_target = target; mbox = ccb->mbox; mbox64 = ccb->mbox64; mbox->logdrv = target; /* * A little HACK: 2nd bit is zero for all scsi read * commands and is set for all scsi write commands */ mbox->cmd = (scp->cmnd[0] & 0x02) ? MBOXCMD_LWRITE64: MBOXCMD_LREAD64 ; /* * 6-byte READ(0x08) or WRITE(0x0A) cdb */ if (scp->cmd_len == 6) { mbox->numsectors = (uint32_t)scp->cmnd[4]; mbox->lba = ((uint32_t)scp->cmnd[1] << 16) | ((uint32_t)scp->cmnd[2] << 8) | (uint32_t)scp->cmnd[3]; mbox->lba &= 0x1FFFFF; } /* * 10-byte READ(0x28) or WRITE(0x2A) cdb */ else if (scp->cmd_len == 10) { mbox->numsectors = (uint32_t)scp->cmnd[8] | ((uint32_t)scp->cmnd[7] << 8); mbox->lba = ((uint32_t)scp->cmnd[2] << 24) | ((uint32_t)scp->cmnd[3] << 16) | ((uint32_t)scp->cmnd[4] << 8) | (uint32_t)scp->cmnd[5]; } /* * 12-byte READ(0xA8) or WRITE(0xAA) cdb */ else if (scp->cmd_len == 12) { mbox->lba = ((uint32_t)scp->cmnd[2] << 24) | ((uint32_t)scp->cmnd[3] << 16) | ((uint32_t)scp->cmnd[4] << 8) | (uint32_t)scp->cmnd[5]; mbox->numsectors = ((uint32_t)scp->cmnd[6] << 24) | ((uint32_t)scp->cmnd[7] << 16) | ((uint32_t)scp->cmnd[8] << 8) | (uint32_t)scp->cmnd[9]; } else { con_log(CL_ANN, (KERN_WARNING "megaraid: unsupported CDB length\n")); megaraid_dealloc_scb(adapter, scb); scp->result = (DID_ERROR << 16); return NULL; } scb->dma_direction = scp->sc_data_direction; // Calculate Scatter-Gather info mbox64->xferaddr_lo = (uint32_t )ccb->sgl_dma_h; mbox->numsge = megaraid_mbox_mksgl(adapter, scb); mbox->xferaddr = 0xFFFFFFFF; mbox64->xferaddr_hi = 0; return scb; case RESERVE: case RELEASE: /* * Do we support clustering and is the support enabled */ if (!adapter->ha) { scp->result = (DID_BAD_TARGET << 16); return NULL; } /* * Allocate a SCB and initialize mailbox */ if (!(scb = megaraid_alloc_scb(adapter, scp))) { scp->result = (DID_ERROR << 16); *busy = 1; return NULL; } ccb = (mbox_ccb_t *)scb->ccb; scb->dev_channel = 0xFF; scb->dev_target = target; ccb->raw_mbox[0] = CLUSTER_CMD; ccb->raw_mbox[2] = (scp->cmnd[0] == RESERVE) ? RESERVE_LD : RELEASE_LD; ccb->raw_mbox[3] = target; scb->dma_direction = scp->sc_data_direction; return scb; default: scp->result = (DID_BAD_TARGET << 16); return NULL; } } else { // Passthru device commands // Do not allow access to target id > 15 or LUN > 7 if (target > 15 || SCP2LUN(scp) > 7) { scp->result = (DID_BAD_TARGET << 16); return NULL; } // if fast load option was set and scan for last device is // over, reset the fast_load flag so that during a possible // next scan, devices can be made available if (rdev->fast_load && (target == 15) && (SCP2CHANNEL(scp) == adapter->max_channel -1)) { con_log(CL_ANN, (KERN_INFO "megaraid[%d]: physical device scan re-enabled\n", adapter->host->host_no)); rdev->fast_load = 0; } /* * Display the channel scan for physical devices */ if (!(rdev->last_disp & (1L << SCP2CHANNEL(scp)))) { ss = rdev->fast_load ? skip : scan; con_log(CL_ANN, (KERN_INFO "scsi[%d]: %s scsi channel %d [Phy %d]", adapter->host->host_no, ss, SCP2CHANNEL(scp), channel)); con_log(CL_ANN, ( " for non-raid devices\n")); rdev->last_disp |= (1L << SCP2CHANNEL(scp)); } // disable channel sweep if fast load option given if (rdev->fast_load) { scp->result = (DID_BAD_TARGET << 16); return NULL; } // Allocate a SCB and initialize passthru if (!(scb = megaraid_alloc_scb(adapter, scp))) { scp->result = (DID_ERROR << 16); *busy = 1; return NULL; } ccb = (mbox_ccb_t *)scb->ccb; scb->dev_channel = channel; scb->dev_target = target; scb->dma_direction = scp->sc_data_direction; mbox = ccb->mbox; mbox64 = ccb->mbox64; // Does this firmware support extended CDBs if (adapter->max_cdb_sz == 16) { mbox->cmd = MBOXCMD_EXTPTHRU; megaraid_mbox_prepare_epthru(adapter, scb, scp); mbox64->xferaddr_lo = (uint32_t)ccb->epthru_dma_h; mbox64->xferaddr_hi = 0; mbox->xferaddr = 0xFFFFFFFF; } else { mbox->cmd = MBOXCMD_PASSTHRU64; megaraid_mbox_prepare_pthru(adapter, scb, scp); mbox64->xferaddr_lo = (uint32_t)ccb->pthru_dma_h; mbox64->xferaddr_hi = 0; mbox->xferaddr = 0xFFFFFFFF; } return scb; } // NOT REACHED } /** * megaraid_mbox_runpendq - execute commands queued in the pending queue * @adapter : controller's soft state * @scb_q : SCB to be queued in the pending list * * Scan the pending list for commands which are not yet issued and try to * post to the controller. The SCB can be a null pointer, which would indicate * no SCB to be queue, just try to execute the ones in the pending list. * * NOTE: We do not actually traverse the pending list. The SCBs are plucked * out from the head of the pending list. If it is successfully issued, the * next SCB is at the head now. */ static void megaraid_mbox_runpendq(adapter_t *adapter, scb_t *scb_q) { scb_t *scb; unsigned long flags; spin_lock_irqsave(PENDING_LIST_LOCK(adapter), flags); if (scb_q) { scb_q->state = SCB_PENDQ; list_add_tail(&scb_q->list, &adapter->pend_list); } // if the adapter in not in quiescent mode, post the commands to FW if (adapter->quiescent) { spin_unlock_irqrestore(PENDING_LIST_LOCK(adapter), flags); return; } while (!list_empty(&adapter->pend_list)) { assert_spin_locked(PENDING_LIST_LOCK(adapter)); scb = list_entry(adapter->pend_list.next, scb_t, list); // remove the scb from the pending list and try to // issue. If we are unable to issue it, put back in // the pending list and return list_del_init(&scb->list); spin_unlock_irqrestore(PENDING_LIST_LOCK(adapter), flags); // if mailbox was busy, return SCB back to pending // list. Make sure to add at the head, since that's // where it would have been removed from scb->state = SCB_ISSUED; if (mbox_post_cmd(adapter, scb) != 0) { spin_lock_irqsave(PENDING_LIST_LOCK(adapter), flags); scb->state = SCB_PENDQ; list_add(&scb->list, &adapter->pend_list); spin_unlock_irqrestore(PENDING_LIST_LOCK(adapter), flags); return; } spin_lock_irqsave(PENDING_LIST_LOCK(adapter), flags); } spin_unlock_irqrestore(PENDING_LIST_LOCK(adapter), flags); return; } /** * megaraid_mbox_prepare_pthru - prepare a command for physical devices * @adapter : pointer to controller's soft state * @scb : scsi control block * @scp : scsi command from the mid-layer * * Prepare a command for the scsi physical devices. */ static void megaraid_mbox_prepare_pthru(adapter_t *adapter, scb_t *scb, struct scsi_cmnd *scp) { mbox_ccb_t *ccb; mraid_passthru_t *pthru; uint8_t channel; uint8_t target; ccb = (mbox_ccb_t *)scb->ccb; pthru = ccb->pthru; channel = scb->dev_channel; target = scb->dev_target; // 0=6sec, 1=60sec, 2=10min, 3=3hrs, 4=NO timeout pthru->timeout = 4; pthru->ars = 1; pthru->islogical = 0; pthru->channel = 0; pthru->target = (channel << 4) | target; pthru->logdrv = SCP2LUN(scp); pthru->reqsenselen = 14; pthru->cdblen = scp->cmd_len; memcpy(pthru->cdb, scp->cmnd, scp->cmd_len); if (scsi_bufflen(scp)) { pthru->dataxferlen = scsi_bufflen(scp); pthru->dataxferaddr = ccb->sgl_dma_h; pthru->numsge = megaraid_mbox_mksgl(adapter, scb); } else { pthru->dataxferaddr = 0; pthru->dataxferlen = 0; pthru->numsge = 0; } return; } /** * megaraid_mbox_prepare_epthru - prepare a command for physical devices * @adapter : pointer to controller's soft state * @scb : scsi control block * @scp : scsi command from the mid-layer * * Prepare a command for the scsi physical devices. This routine prepares * commands for devices which can take extended CDBs (>10 bytes). */ static void megaraid_mbox_prepare_epthru(adapter_t *adapter, scb_t *scb, struct scsi_cmnd *scp) { mbox_ccb_t *ccb; mraid_epassthru_t *epthru; uint8_t channel; uint8_t target; ccb = (mbox_ccb_t *)scb->ccb; epthru = ccb->epthru; channel = scb->dev_channel; target = scb->dev_target; // 0=6sec, 1=60sec, 2=10min, 3=3hrs, 4=NO timeout epthru->timeout = 4; epthru->ars = 1; epthru->islogical = 0; epthru->channel = 0; epthru->target = (channel << 4) | target; epthru->logdrv = SCP2LUN(scp); epthru->reqsenselen = 14; epthru->cdblen = scp->cmd_len; memcpy(epthru->cdb, scp->cmnd, scp->cmd_len); if (scsi_bufflen(scp)) { epthru->dataxferlen = scsi_bufflen(scp); epthru->dataxferaddr = ccb->sgl_dma_h; epthru->numsge = megaraid_mbox_mksgl(adapter, scb); } else { epthru->dataxferaddr = 0; epthru->dataxferlen = 0; epthru->numsge = 0; } return; } /** * megaraid_ack_sequence - interrupt ack sequence for memory mapped HBAs * @adapter : controller's soft state * * Interrupt acknowledgement sequence for memory mapped HBAs. Find out the * completed command and put them on the completed list for later processing. * * Returns: 1 if the interrupt is valid, 0 otherwise */ static int megaraid_ack_sequence(adapter_t *adapter) { mraid_device_t *raid_dev = ADAP2RAIDDEV(adapter); mbox_t *mbox; scb_t *scb; uint8_t nstatus; uint8_t completed[MBOX_MAX_FIRMWARE_STATUS]; struct list_head clist; int handled; uint32_t dword; unsigned long flags; int i, j; mbox = raid_dev->mbox; // move the SCBs from the firmware completed array to our local list INIT_LIST_HEAD(&clist); // loop till F/W has more commands for us to complete handled = 0; spin_lock_irqsave(MAILBOX_LOCK(raid_dev), flags); do { /* * Check if a valid interrupt is pending. If found, force the * interrupt line low. */ dword = RDOUTDOOR(raid_dev); if (dword != 0x10001234) break; handled = 1; WROUTDOOR(raid_dev, 0x10001234); nstatus = 0; // wait for valid numstatus to post for (i = 0; i < 0xFFFFF; i++) { if (mbox->numstatus != 0xFF) { nstatus = mbox->numstatus; break; } rmb(); } mbox->numstatus = 0xFF; adapter->outstanding_cmds -= nstatus; for (i = 0; i < nstatus; i++) { // wait for valid command index to post for (j = 0; j < 0xFFFFF; j++) { if (mbox->completed[i] != 0xFF) break; rmb(); } completed[i] = mbox->completed[i]; mbox->completed[i] = 0xFF; if (completed[i] == 0xFF) { con_log(CL_ANN, (KERN_CRIT "megaraid: command posting timed out\n")); BUG(); continue; } // Get SCB associated with this command id if (completed[i] >= MBOX_MAX_SCSI_CMDS) { // a cmm command scb = adapter->uscb_list + (completed[i] - MBOX_MAX_SCSI_CMDS); } else { // an os command scb = adapter->kscb_list + completed[i]; } scb->status = mbox->status; list_add_tail(&scb->list, &clist); } // Acknowledge interrupt WRINDOOR(raid_dev, 0x02); } while(1); spin_unlock_irqrestore(MAILBOX_LOCK(raid_dev), flags); // put the completed commands in the completed list. DPC would // complete these commands later spin_lock_irqsave(COMPLETED_LIST_LOCK(adapter), flags); list_splice(&clist, &adapter->completed_list); spin_unlock_irqrestore(COMPLETED_LIST_LOCK(adapter), flags); // schedule the DPC if there is some work for it if (handled) tasklet_schedule(&adapter->dpc_h); return handled; } /** * megaraid_isr - isr for memory based mailbox based controllers * @irq : irq * @devp : pointer to our soft state * * Interrupt service routine for memory-mapped mailbox controllers. */ static irqreturn_t megaraid_isr(int irq, void *devp) { adapter_t *adapter = devp; int handled; handled = megaraid_ack_sequence(adapter); /* Loop through any pending requests */ if (!adapter->quiescent) { megaraid_mbox_runpendq(adapter, NULL); } return IRQ_RETVAL(handled); } /** * megaraid_mbox_dpc - the tasklet to complete the commands from completed list * @devp : pointer to HBA soft state * * Pick up the commands from the completed list and send back to the owners. * This is a reentrant function and does not assume any locks are held while * it is being called. */ static void megaraid_mbox_dpc(unsigned long devp) { adapter_t *adapter = (adapter_t *)devp; mraid_device_t *raid_dev; struct list_head clist; struct scatterlist *sgl; scb_t *scb; scb_t *tmp; struct scsi_cmnd *scp; mraid_passthru_t *pthru; mraid_epassthru_t *epthru; mbox_ccb_t *ccb; int islogical; int pdev_index; int pdev_state; mbox_t *mbox; unsigned long flags; uint8_t c; int status; uioc_t *kioc; if (!adapter) return; raid_dev = ADAP2RAIDDEV(adapter); // move the SCBs from the completed list to our local list INIT_LIST_HEAD(&clist); spin_lock_irqsave(COMPLETED_LIST_LOCK(adapter), flags); list_splice_init(&adapter->completed_list, &clist); spin_unlock_irqrestore(COMPLETED_LIST_LOCK(adapter), flags); list_for_each_entry_safe(scb, tmp, &clist, list) { status = scb->status; scp = scb->scp; ccb = (mbox_ccb_t *)scb->ccb; pthru = ccb->pthru; epthru = ccb->epthru; mbox = ccb->mbox; // Make sure f/w has completed a valid command if (scb->state != SCB_ISSUED) { con_log(CL_ANN, (KERN_CRIT "megaraid critical err: invalid command %d:%d:%p\n", scb->sno, scb->state, scp)); BUG(); continue; // Must never happen! } // check for the management command and complete it right away if (scb->sno >= MBOX_MAX_SCSI_CMDS) { scb->state = SCB_FREE; scb->status = status; // remove from local clist list_del_init(&scb->list); kioc = (uioc_t *)scb->gp; kioc->status = 0; megaraid_mbox_mm_done(adapter, scb); continue; } // Was an abort issued for this command earlier if (scb->state & SCB_ABORT) { con_log(CL_ANN, (KERN_NOTICE "megaraid: aborted cmd [%x] completed\n", scb->sno)); } /* * If the inquiry came of a disk drive which is not part of * any RAID array, expose it to the kernel. For this to be * enabled, user must set the "megaraid_expose_unconf_disks" * flag to 1 by specifying it on module parameter list. * This would enable data migration off drives from other * configurations. */ islogical = MRAID_IS_LOGICAL(adapter, scp); if (scp->cmnd[0] == INQUIRY && status == 0 && islogical == 0 && IS_RAID_CH(raid_dev, scb->dev_channel)) { sgl = scsi_sglist(scp); if (sg_page(sgl)) { c = *(unsigned char *) sg_virt(&sgl[0]); } else { con_log(CL_ANN, (KERN_WARNING "megaraid mailbox: invalid sg:%d\n", __LINE__)); c = 0; } if ((c & 0x1F ) == TYPE_DISK) { pdev_index = (scb->dev_channel * 16) + scb->dev_target; pdev_state = raid_dev->pdrv_state[pdev_index] & 0x0F; if (pdev_state == PDRV_ONLINE || pdev_state == PDRV_FAILED || pdev_state == PDRV_RBLD || pdev_state == PDRV_HOTSPARE || megaraid_expose_unconf_disks == 0) { status = 0xF0; } } } // Convert MegaRAID status to Linux error code switch (status) { case 0x00: scp->result = (DID_OK << 16); break; case 0x02: /* set sense_buffer and result fields */ if (mbox->cmd == MBOXCMD_PASSTHRU || mbox->cmd == MBOXCMD_PASSTHRU64) { memcpy(scp->sense_buffer, pthru->reqsensearea, 14); scp->result = SAM_STAT_CHECK_CONDITION; } else { if (mbox->cmd == MBOXCMD_EXTPTHRU) { memcpy(scp->sense_buffer, epthru->reqsensearea, 14); scp->result = SAM_STAT_CHECK_CONDITION; } else scsi_build_sense(scp, 0, ABORTED_COMMAND, 0, 0); } break; case 0x08: scp->result = DID_BUS_BUSY << 16 | status; break; default: /* * If TEST_UNIT_READY fails, we know RESERVATION_STATUS * failed */ if (scp->cmnd[0] == TEST_UNIT_READY) { scp->result = DID_ERROR << 16 | SAM_STAT_RESERVATION_CONFLICT; } else /* * Error code returned is 1 if Reserve or Release * failed or the input parameter is invalid */ if (status == 1 && (scp->cmnd[0] == RESERVE || scp->cmnd[0] == RELEASE)) { scp->result = DID_ERROR << 16 | SAM_STAT_RESERVATION_CONFLICT; } else { scp->result = DID_BAD_TARGET << 16 | status; } } // print a debug message for all failed commands if (status) { megaraid_mbox_display_scb(adapter, scb); } scsi_dma_unmap(scp); // remove from local clist list_del_init(&scb->list); // put back in free list megaraid_dealloc_scb(adapter, scb); // send the scsi packet back to kernel scsi_done(scp); } return; } /** * megaraid_abort_handler - abort the scsi command * @scp : command to be aborted * * Abort a previous SCSI request. Only commands on the pending list can be * aborted. All the commands issued to the F/W must complete. **/ static int megaraid_abort_handler(struct scsi_cmnd *scp) { adapter_t *adapter; mraid_device_t *raid_dev; scb_t *scb; scb_t *tmp; int found; unsigned long flags; int i; adapter = SCP2ADAPTER(scp); raid_dev = ADAP2RAIDDEV(adapter); con_log(CL_ANN, (KERN_WARNING "megaraid: aborting cmd=%x <c=%d t=%d l=%d>\n", scp->cmnd[0], SCP2CHANNEL(scp), SCP2TARGET(scp), SCP2LUN(scp))); // If FW has stopped responding, simply return failure if (raid_dev->hw_error) { con_log(CL_ANN, (KERN_NOTICE "megaraid: hw error, not aborting\n")); return FAILED; } // There might a race here, where the command was completed by the // firmware and now it is on the completed list. Before we could // complete the command to the kernel in dpc, the abort came. // Find out if this is the case to avoid the race. scb = NULL; spin_lock_irqsave(COMPLETED_LIST_LOCK(adapter), flags); list_for_each_entry_safe(scb, tmp, &adapter->completed_list, list) { if (scb->scp == scp) { // Found command list_del_init(&scb->list); // from completed list con_log(CL_ANN, (KERN_WARNING "megaraid: %d[%d:%d], abort from completed list\n", scb->sno, scb->dev_channel, scb->dev_target)); scp->result = (DID_ABORT << 16); scsi_done(scp); megaraid_dealloc_scb(adapter, scb); spin_unlock_irqrestore(COMPLETED_LIST_LOCK(adapter), flags); return SUCCESS; } } spin_unlock_irqrestore(COMPLETED_LIST_LOCK(adapter), flags); // Find out if this command is still on the pending list. If it is and // was never issued, abort and return success. If the command is owned // by the firmware, we must wait for it to complete by the FW. spin_lock_irqsave(PENDING_LIST_LOCK(adapter), flags); list_for_each_entry_safe(scb, tmp, &adapter->pend_list, list) { if (scb->scp == scp) { // Found command list_del_init(&scb->list); // from pending list ASSERT(!(scb->state & SCB_ISSUED)); con_log(CL_ANN, (KERN_WARNING "megaraid abort: [%d:%d], driver owner\n", scb->dev_channel, scb->dev_target)); scp->result = (DID_ABORT << 16); scsi_done(scp); megaraid_dealloc_scb(adapter, scb); spin_unlock_irqrestore(PENDING_LIST_LOCK(adapter), flags); return SUCCESS; } } spin_unlock_irqrestore(PENDING_LIST_LOCK(adapter), flags); // Check do we even own this command, in which case this would be // owned by the firmware. The only way to locate the FW scb is to // traverse through the list of all SCB, since driver does not // maintain these SCBs on any list found = 0; spin_lock_irq(&adapter->lock); for (i = 0; i < MBOX_MAX_SCSI_CMDS; i++) { scb = adapter->kscb_list + i; if (scb->scp == scp) { found = 1; if (!(scb->state & SCB_ISSUED)) { con_log(CL_ANN, (KERN_WARNING "megaraid abort: %d[%d:%d], invalid state\n", scb->sno, scb->dev_channel, scb->dev_target)); BUG(); } else { con_log(CL_ANN, (KERN_WARNING "megaraid abort: %d[%d:%d], fw owner\n", scb->sno, scb->dev_channel, scb->dev_target)); } } } spin_unlock_irq(&adapter->lock); if (!found) { con_log(CL_ANN, (KERN_WARNING "megaraid abort: do now own\n")); // FIXME: Should there be a callback for this command? return SUCCESS; } // We cannot actually abort a command owned by firmware, return // failure and wait for reset. In host reset handler, we will find out // if the HBA is still live return FAILED; } /** * megaraid_reset_handler - device reset handler for mailbox based driver * @scp : reference command * * Reset handler for the mailbox based controller. First try to find out if * the FW is still live, in which case the outstanding commands counter mut go * down to 0. If that happens, also issue the reservation reset command to * relinquish (possible) reservations on the logical drives connected to this * host. **/ static int megaraid_reset_handler(struct scsi_cmnd *scp) { adapter_t *adapter; scb_t *scb; scb_t *tmp; mraid_device_t *raid_dev; unsigned long flags; uint8_t raw_mbox[sizeof(mbox_t)]; int rval; int recovery_window; int i; uioc_t *kioc; adapter = SCP2ADAPTER(scp); raid_dev = ADAP2RAIDDEV(adapter); // return failure if adapter is not responding if (raid_dev->hw_error) { con_log(CL_ANN, (KERN_NOTICE "megaraid: hw error, cannot reset\n")); return FAILED; } // Under exceptional conditions, FW can take up to 3 minutes to // complete command processing. Wait for additional 2 minutes for the // pending commands counter to go down to 0. If it doesn't, let the // controller be marked offline // Also, reset all the commands currently owned by the driver spin_lock_irqsave(PENDING_LIST_LOCK(adapter), flags); list_for_each_entry_safe(scb, tmp, &adapter->pend_list, list) { list_del_init(&scb->list); // from pending list if (scb->sno >= MBOX_MAX_SCSI_CMDS) { con_log(CL_ANN, (KERN_WARNING "megaraid: IOCTL packet with %d[%d:%d] being reset\n", scb->sno, scb->dev_channel, scb->dev_target)); scb->status = -1; kioc = (uioc_t *)scb->gp; kioc->status = -EFAULT; megaraid_mbox_mm_done(adapter, scb); } else { if (scb->scp == scp) { // Found command con_log(CL_ANN, (KERN_WARNING "megaraid: %d[%d:%d], reset from pending list\n", scb->sno, scb->dev_channel, scb->dev_target)); } else { con_log(CL_ANN, (KERN_WARNING "megaraid: IO packet with %d[%d:%d] being reset\n", scb->sno, scb->dev_channel, scb->dev_target)); } scb->scp->result = (DID_RESET << 16); scsi_done(scb->scp); megaraid_dealloc_scb(adapter, scb); } } spin_unlock_irqrestore(PENDING_LIST_LOCK(adapter), flags); if (adapter->outstanding_cmds) { con_log(CL_ANN, (KERN_NOTICE "megaraid: %d outstanding commands. Max wait %d sec\n", adapter->outstanding_cmds, (MBOX_RESET_WAIT + MBOX_RESET_EXT_WAIT))); } recovery_window = MBOX_RESET_WAIT + MBOX_RESET_EXT_WAIT; for (i = 0; i < recovery_window; i++) { megaraid_ack_sequence(adapter); // print a message once every 5 seconds only if (!(i % 5)) { con_log(CL_ANN, ( "megaraid mbox: Wait for %d commands to complete:%d\n", adapter->outstanding_cmds, (MBOX_RESET_WAIT + MBOX_RESET_EXT_WAIT) - i)); } // bailout if no recovery happened in reset time if (adapter->outstanding_cmds == 0) { break; } msleep(1000); } spin_lock(&adapter->lock); // If still outstanding commands, bail out if (adapter->outstanding_cmds) { con_log(CL_ANN, (KERN_WARNING "megaraid mbox: critical hardware error!\n")); raid_dev->hw_error = 1; rval = FAILED; goto out; } else { con_log(CL_ANN, (KERN_NOTICE "megaraid mbox: reset sequence completed successfully\n")); } // If the controller supports clustering, reset reservations if (!adapter->ha) { rval = SUCCESS; goto out; } // clear reservations if any raw_mbox[0] = CLUSTER_CMD; raw_mbox[2] = RESET_RESERVATIONS; rval = SUCCESS; if (mbox_post_sync_cmd_fast(adapter, raw_mbox) == 0) { con_log(CL_ANN, (KERN_INFO "megaraid: reservation reset\n")); } else { rval = FAILED; con_log(CL_ANN, (KERN_WARNING "megaraid: reservation reset failed\n")); } out: spin_unlock(&adapter->lock); return rval; } /* * START: internal commands library * * This section of the driver has the common routine used by the driver and * also has all the FW routines */ /** * mbox_post_sync_cmd() - blocking command to the mailbox based controllers * @adapter : controller's soft state * @raw_mbox : the mailbox * * Issue a scb in synchronous and non-interrupt mode for mailbox based * controllers. */ static int mbox_post_sync_cmd(adapter_t *adapter, uint8_t raw_mbox[]) { mraid_device_t *raid_dev = ADAP2RAIDDEV(adapter); mbox_t *mbox; uint8_t status; int i; mbox = raid_dev->mbox; /* * Wait until mailbox is free */ if (megaraid_busywait_mbox(raid_dev) != 0) goto blocked_mailbox; /* * Copy mailbox data into host structure */ memcpy((caddr_t)mbox, (caddr_t)raw_mbox, 16); mbox->cmdid = 0xFE; mbox->busy = 1; mbox->poll = 0; mbox->ack = 0; mbox->numstatus = 0xFF; mbox->status = 0xFF; wmb(); WRINDOOR(raid_dev, raid_dev->mbox_dma | 0x1); // wait for maximum 1 second for status to post. If the status is not // available within 1 second, assume FW is initializing and wait // for an extended amount of time if (mbox->numstatus == 0xFF) { // status not yet available udelay(25); for (i = 0; mbox->numstatus == 0xFF && i < 1000; i++) { rmb(); msleep(1); } if (i == 1000) { con_log(CL_ANN, (KERN_NOTICE "megaraid mailbox: wait for FW to boot ")); for (i = 0; (mbox->numstatus == 0xFF) && (i < MBOX_RESET_WAIT); i++) { rmb(); con_log(CL_ANN, ("\b\b\b\b\b[%03d]", MBOX_RESET_WAIT - i)); msleep(1000); } if (i == MBOX_RESET_WAIT) { con_log(CL_ANN, ( "\nmegaraid mailbox: status not available\n")); return -1; } con_log(CL_ANN, ("\b\b\b\b\b[ok] \n")); } } // wait for maximum 1 second for poll semaphore if (mbox->poll != 0x77) { udelay(25); for (i = 0; (mbox->poll != 0x77) && (i < 1000); i++) { rmb(); msleep(1); } if (i == 1000) { con_log(CL_ANN, (KERN_WARNING "megaraid mailbox: could not get poll semaphore\n")); return -1; } } WRINDOOR(raid_dev, raid_dev->mbox_dma | 0x2); wmb(); // wait for maximum 1 second for acknowledgement if (RDINDOOR(raid_dev) & 0x2) { udelay(25); for (i = 0; (RDINDOOR(raid_dev) & 0x2) && (i < 1000); i++) { rmb(); msleep(1); } if (i == 1000) { con_log(CL_ANN, (KERN_WARNING "megaraid mailbox: could not acknowledge\n")); return -1; } } mbox->poll = 0; mbox->ack = 0x77; status = mbox->status; // invalidate the completed command id array. After command // completion, firmware would write the valid id. mbox->numstatus = 0xFF; mbox->status = 0xFF; for (i = 0; i < MBOX_MAX_FIRMWARE_STATUS; i++) { mbox->completed[i] = 0xFF; } return status; blocked_mailbox: con_log(CL_ANN, (KERN_WARNING "megaraid: blocked mailbox\n") ); return -1; } /** * mbox_post_sync_cmd_fast - blocking command to the mailbox based controllers * @adapter : controller's soft state * @raw_mbox : the mailbox * * Issue a scb in synchronous and non-interrupt mode for mailbox based * controllers. This is a faster version of the synchronous command and * therefore can be called in interrupt-context as well. */ static int mbox_post_sync_cmd_fast(adapter_t *adapter, uint8_t raw_mbox[]) { mraid_device_t *raid_dev = ADAP2RAIDDEV(adapter); mbox_t *mbox; long i; mbox = raid_dev->mbox; // return immediately if the mailbox is busy if (mbox->busy) return -1; // Copy mailbox data into host structure memcpy((caddr_t)mbox, (caddr_t)raw_mbox, 14); mbox->cmdid = 0xFE; mbox->busy = 1; mbox->poll = 0; mbox->ack = 0; mbox->numstatus = 0xFF; mbox->status = 0xFF; wmb(); WRINDOOR(raid_dev, raid_dev->mbox_dma | 0x1); for (i = 0; i < MBOX_SYNC_WAIT_CNT; i++) { if (mbox->numstatus != 0xFF) break; rmb(); udelay(MBOX_SYNC_DELAY_200); } if (i == MBOX_SYNC_WAIT_CNT) { // We may need to re-calibrate the counter con_log(CL_ANN, (KERN_CRIT "megaraid: fast sync command timed out\n")); } WRINDOOR(raid_dev, raid_dev->mbox_dma | 0x2); wmb(); return mbox->status; } /** * megaraid_busywait_mbox() - Wait until the controller's mailbox is available * @raid_dev : RAID device (HBA) soft state * * Wait until the controller's mailbox is available to accept more commands. * Wait for at most 1 second. */ static int megaraid_busywait_mbox(mraid_device_t *raid_dev) { mbox_t *mbox = raid_dev->mbox; int i = 0; if (mbox->busy) { udelay(25); for (i = 0; mbox->busy && i < 1000; i++) msleep(1); } if (i < 1000) return 0; else return -1; } /** * megaraid_mbox_product_info - some static information about the controller * @adapter : our soft state * * Issue commands to the controller to grab some parameters required by our * caller. */ static int megaraid_mbox_product_info(adapter_t *adapter) { mraid_device_t *raid_dev = ADAP2RAIDDEV(adapter); mbox_t *mbox; uint8_t raw_mbox[sizeof(mbox_t)]; mraid_pinfo_t *pinfo; dma_addr_t pinfo_dma_h; mraid_inquiry3_t *mraid_inq3; int i; memset((caddr_t)raw_mbox, 0, sizeof(raw_mbox)); mbox = (mbox_t *)raw_mbox; /* * Issue an ENQUIRY3 command to find out certain adapter parameters, * e.g., max channels, max commands etc. */ pinfo = dma_alloc_coherent(&adapter->pdev->dev, sizeof(mraid_pinfo_t), &pinfo_dma_h, GFP_KERNEL); if (pinfo == NULL) { con_log(CL_ANN, (KERN_WARNING "megaraid: out of memory, %s %d\n", __func__, __LINE__)); return -1; } mbox->xferaddr = (uint32_t)adapter->ibuf_dma_h; memset((void *)adapter->ibuf, 0, MBOX_IBUF_SIZE); raw_mbox[0] = FC_NEW_CONFIG; raw_mbox[2] = NC_SUBOP_ENQUIRY3; raw_mbox[3] = ENQ3_GET_SOLICITED_FULL; // Issue the command if (mbox_post_sync_cmd(adapter, raw_mbox) != 0) { con_log(CL_ANN, (KERN_WARNING "megaraid: Inquiry3 failed\n")); dma_free_coherent(&adapter->pdev->dev, sizeof(mraid_pinfo_t), pinfo, pinfo_dma_h); return -1; } /* * Collect information about state of each physical drive * attached to the controller. We will expose all the disks * which are not part of RAID */ mraid_inq3 = (mraid_inquiry3_t *)adapter->ibuf; for (i = 0; i < MBOX_MAX_PHYSICAL_DRIVES; i++) { raid_dev->pdrv_state[i] = mraid_inq3->pdrv_state[i]; } /* * Get product info for information like number of channels, * maximum commands supported. */ memset((caddr_t)raw_mbox, 0, sizeof(raw_mbox)); mbox->xferaddr = (uint32_t)pinfo_dma_h; raw_mbox[0] = FC_NEW_CONFIG; raw_mbox[2] = NC_SUBOP_PRODUCT_INFO; if (mbox_post_sync_cmd(adapter, raw_mbox) != 0) { con_log(CL_ANN, (KERN_WARNING "megaraid: product info failed\n")); dma_free_coherent(&adapter->pdev->dev, sizeof(mraid_pinfo_t), pinfo, pinfo_dma_h); return -1; } /* * Setup some parameters for host, as required by our caller */ adapter->max_channel = pinfo->nchannels; /* * we will export all the logical drives on a single channel. * Add 1 since inquires do not come for inititor ID */ adapter->max_target = MAX_LOGICAL_DRIVES_40LD + 1; adapter->max_lun = 8; // up to 8 LUNs for non-disk devices /* * These are the maximum outstanding commands for the scsi-layer */ adapter->max_cmds = MBOX_MAX_SCSI_CMDS; memset(adapter->fw_version, 0, VERSION_SIZE); memset(adapter->bios_version, 0, VERSION_SIZE); memcpy(adapter->fw_version, pinfo->fw_version, 4); adapter->fw_version[4] = 0; memcpy(adapter->bios_version, pinfo->bios_version, 4); adapter->bios_version[4] = 0; con_log(CL_ANN, (KERN_NOTICE "megaraid: fw version:[%s] bios version:[%s]\n", adapter->fw_version, adapter->bios_version)); dma_free_coherent(&adapter->pdev->dev, sizeof(mraid_pinfo_t), pinfo, pinfo_dma_h); return 0; } /** * megaraid_mbox_extended_cdb - check for support for extended CDBs * @adapter : soft state for the controller * * This routine check whether the controller in question supports extended * ( > 10 bytes ) CDBs. */ static int megaraid_mbox_extended_cdb(adapter_t *adapter) { mbox_t *mbox; uint8_t raw_mbox[sizeof(mbox_t)]; int rval; mbox = (mbox_t *)raw_mbox; memset((caddr_t)raw_mbox, 0, sizeof(raw_mbox)); mbox->xferaddr = (uint32_t)adapter->ibuf_dma_h; memset((void *)adapter->ibuf, 0, MBOX_IBUF_SIZE); raw_mbox[0] = MAIN_MISC_OPCODE; raw_mbox[2] = SUPPORT_EXT_CDB; /* * Issue the command */ rval = 0; if (mbox_post_sync_cmd(adapter, raw_mbox) != 0) { rval = -1; } return rval; } /** * megaraid_mbox_support_ha - Do we support clustering * @adapter : soft state for the controller * @init_id : ID of the initiator * * Determine if the firmware supports clustering and the ID of the initiator. */ static int megaraid_mbox_support_ha(adapter_t *adapter, uint16_t *init_id) { mbox_t *mbox; uint8_t raw_mbox[sizeof(mbox_t)]; int rval; mbox = (mbox_t *)raw_mbox; memset((caddr_t)raw_mbox, 0, sizeof(raw_mbox)); mbox->xferaddr = (uint32_t)adapter->ibuf_dma_h; memset((void *)adapter->ibuf, 0, MBOX_IBUF_SIZE); raw_mbox[0] = GET_TARGET_ID; // Issue the command *init_id = 7; rval = -1; if (mbox_post_sync_cmd(adapter, raw_mbox) == 0) { *init_id = *(uint8_t *)adapter->ibuf; con_log(CL_ANN, (KERN_INFO "megaraid: cluster firmware, initiator ID: %d\n", *init_id)); rval = 0; } return rval; } /** * megaraid_mbox_support_random_del - Do we support random deletion * @adapter : soft state for the controller * * Determine if the firmware supports random deletion. * Return: 1 is operation supported, 0 otherwise */ static int megaraid_mbox_support_random_del(adapter_t *adapter) { uint8_t raw_mbox[sizeof(mbox_t)]; int rval; /* * Newer firmware on Dell CERC expect a different * random deletion handling, so disable it. */ if (adapter->pdev->vendor == PCI_VENDOR_ID_AMI && adapter->pdev->device == PCI_DEVICE_ID_AMI_MEGARAID3 && adapter->pdev->subsystem_vendor == PCI_VENDOR_ID_DELL && adapter->pdev->subsystem_device == PCI_SUBSYS_ID_CERC_ATA100_4CH && (adapter->fw_version[0] > '6' || (adapter->fw_version[0] == '6' && adapter->fw_version[2] > '6') || (adapter->fw_version[0] == '6' && adapter->fw_version[2] == '6' && adapter->fw_version[3] > '1'))) { con_log(CL_DLEVEL1, ("megaraid: disable random deletion\n")); return 0; } memset((caddr_t)raw_mbox, 0, sizeof(mbox_t)); raw_mbox[0] = FC_DEL_LOGDRV; raw_mbox[2] = OP_SUP_DEL_LOGDRV; // Issue the command rval = 0; if (mbox_post_sync_cmd(adapter, raw_mbox) == 0) { con_log(CL_DLEVEL1, ("megaraid: supports random deletion\n")); rval = 1; } return rval; } /** * megaraid_mbox_get_max_sg - maximum sg elements supported by the firmware * @adapter : soft state for the controller * * Find out the maximum number of scatter-gather elements supported by the * firmware. */ static int megaraid_mbox_get_max_sg(adapter_t *adapter) { mbox_t *mbox; uint8_t raw_mbox[sizeof(mbox_t)]; int nsg; mbox = (mbox_t *)raw_mbox; memset((caddr_t)raw_mbox, 0, sizeof(mbox_t)); mbox->xferaddr = (uint32_t)adapter->ibuf_dma_h; memset((void *)adapter->ibuf, 0, MBOX_IBUF_SIZE); raw_mbox[0] = MAIN_MISC_OPCODE; raw_mbox[2] = GET_MAX_SG_SUPPORT; // Issue the command if (mbox_post_sync_cmd(adapter, raw_mbox) == 0) { nsg = *(uint8_t *)adapter->ibuf; } else { nsg = MBOX_DEFAULT_SG_SIZE; } if (nsg > MBOX_MAX_SG_SIZE) nsg = MBOX_MAX_SG_SIZE; return nsg; } /** * megaraid_mbox_enum_raid_scsi - enumerate the RAID and SCSI channels * @adapter : soft state for the controller * * Enumerate the RAID and SCSI channels for ROMB platforms so that channels * can be exported as regular SCSI channels. */ static void megaraid_mbox_enum_raid_scsi(adapter_t *adapter) { mraid_device_t *raid_dev = ADAP2RAIDDEV(adapter); mbox_t *mbox; uint8_t raw_mbox[sizeof(mbox_t)]; mbox = (mbox_t *)raw_mbox; memset((caddr_t)raw_mbox, 0, sizeof(mbox_t)); mbox->xferaddr = (uint32_t)adapter->ibuf_dma_h; memset((void *)adapter->ibuf, 0, MBOX_IBUF_SIZE); raw_mbox[0] = CHNL_CLASS; raw_mbox[2] = GET_CHNL_CLASS; // Issue the command. If the command fails, all channels are RAID // channels raid_dev->channel_class = 0xFF; if (mbox_post_sync_cmd(adapter, raw_mbox) == 0) { raid_dev->channel_class = *(uint8_t *)adapter->ibuf; } return; } /** * megaraid_mbox_flush_cache - flush adapter and disks cache * @adapter : soft state for the controller * * Flush adapter cache followed by disks cache. */ static void megaraid_mbox_flush_cache(adapter_t *adapter) { uint8_t raw_mbox[sizeof(mbox_t)]; memset((caddr_t)raw_mbox, 0, sizeof(mbox_t)); raw_mbox[0] = FLUSH_ADAPTER; if (mbox_post_sync_cmd(adapter, raw_mbox) != 0) { con_log(CL_ANN, ("megaraid: flush adapter failed\n")); } raw_mbox[0] = FLUSH_SYSTEM; if (mbox_post_sync_cmd(adapter, raw_mbox) != 0) { con_log(CL_ANN, ("megaraid: flush disks cache failed\n")); } return; } /** * megaraid_mbox_fire_sync_cmd - fire the sync cmd * @adapter : soft state for the controller * * Clears the pending cmds in FW and reinits its RAID structs. */ static int megaraid_mbox_fire_sync_cmd(adapter_t *adapter) { mbox_t *mbox; uint8_t raw_mbox[sizeof(mbox_t)]; mraid_device_t *raid_dev = ADAP2RAIDDEV(adapter); int status = 0; int i; uint32_t dword; memset((caddr_t)raw_mbox, 0, sizeof(mbox_t)); raw_mbox[0] = 0xFF; mbox = raid_dev->mbox; /* Wait until mailbox is free */ if (megaraid_busywait_mbox(raid_dev) != 0) { status = 1; goto blocked_mailbox; } /* Copy mailbox data into host structure */ memcpy((caddr_t)mbox, (caddr_t)raw_mbox, 16); mbox->cmdid = 0xFE; mbox->busy = 1; mbox->poll = 0; mbox->ack = 0; mbox->numstatus = 0; mbox->status = 0; wmb(); WRINDOOR(raid_dev, raid_dev->mbox_dma | 0x1); /* Wait for maximum 1 min for status to post. * If the Firmware SUPPORTS the ABOVE COMMAND, * mbox->cmd will be set to 0 * else * the firmware will reject the command with * mbox->numstatus set to 1 */ i = 0; status = 0; while (!mbox->numstatus && mbox->cmd == 0xFF) { rmb(); msleep(1); i++; if (i > 1000 * 60) { status = 1; break; } } if (mbox->numstatus == 1) status = 1; /*cmd not supported*/ /* Check for interrupt line */ dword = RDOUTDOOR(raid_dev); WROUTDOOR(raid_dev, dword); WRINDOOR(raid_dev,2); return status; blocked_mailbox: con_log(CL_ANN, (KERN_WARNING "megaraid: blocked mailbox\n")); return status; } /** * megaraid_mbox_display_scb - display SCB information, mostly debug purposes * @adapter : controller's soft state * @scb : SCB to be displayed * * Diplay information about the given SCB iff the current debug level is * verbose. */ static void megaraid_mbox_display_scb(adapter_t *adapter, scb_t *scb) { mbox_ccb_t *ccb; struct scsi_cmnd *scp; mbox_t *mbox; int level; int i; ccb = (mbox_ccb_t *)scb->ccb; scp = scb->scp; mbox = ccb->mbox; level = CL_DLEVEL3; con_log(level, (KERN_NOTICE "megaraid mailbox: status:%#x cmd:%#x id:%#x ", scb->status, mbox->cmd, scb->sno)); con_log(level, ("sec:%#x lba:%#x addr:%#x ld:%d sg:%d\n", mbox->numsectors, mbox->lba, mbox->xferaddr, mbox->logdrv, mbox->numsge)); if (!scp) return; con_log(level, (KERN_NOTICE "scsi cmnd: ")); for (i = 0; i < scp->cmd_len; i++) { con_log(level, ("%#2.02x ", scp->cmnd[i])); } con_log(level, ("\n")); return; } /** * megaraid_mbox_setup_device_map - manage device ids * @adapter : Driver's soft state * * Manage the device ids to have an appropriate mapping between the kernel * scsi addresses and megaraid scsi and logical drive addresses. We export * scsi devices on their actual addresses, whereas the logical drives are * exported on a virtual scsi channel. */ static void megaraid_mbox_setup_device_map(adapter_t *adapter) { uint8_t c; uint8_t t; /* * First fill the values on the logical drive channel */ for (t = 0; t < LSI_MAX_LOGICAL_DRIVES_64LD; t++) adapter->device_ids[adapter->max_channel][t] = (t < adapter->init_id) ? t : t - 1; adapter->device_ids[adapter->max_channel][adapter->init_id] = 0xFF; /* * Fill the values on the physical devices channels */ for (c = 0; c < adapter->max_channel; c++) for (t = 0; t < LSI_MAX_LOGICAL_DRIVES_64LD; t++) adapter->device_ids[c][t] = (c << 8) | t; } /* * END: internal commands library */ /* * START: Interface for the common management module * * This is the module, which interfaces with the common management module to * provide support for ioctl and sysfs */ /** * megaraid_cmm_register - register with the management module * @adapter : HBA soft state * * Register with the management module, which allows applications to issue * ioctl calls to the drivers. This interface is used by the management module * to setup sysfs support as well. */ static int megaraid_cmm_register(adapter_t *adapter) { mraid_device_t *raid_dev = ADAP2RAIDDEV(adapter); mraid_mmadp_t adp; scb_t *scb; mbox_ccb_t *ccb; int rval; int i; // Allocate memory for the base list of scb for management module. adapter->uscb_list = kcalloc(MBOX_MAX_USER_CMDS, sizeof(scb_t), GFP_KERNEL); if (adapter->uscb_list == NULL) { con_log(CL_ANN, (KERN_WARNING "megaraid: out of memory, %s %d\n", __func__, __LINE__)); return -1; } // Initialize the synchronization parameters for resources for // commands for management module INIT_LIST_HEAD(&adapter->uscb_pool); spin_lock_init(USER_FREE_LIST_LOCK(adapter)); // link all the packets. Note, CCB for commands, coming from the // commom management module, mailbox physical address are already // setup by it. We just need placeholder for that in our local command // control blocks for (i = 0; i < MBOX_MAX_USER_CMDS; i++) { scb = adapter->uscb_list + i; ccb = raid_dev->uccb_list + i; scb->ccb = (caddr_t)ccb; ccb->mbox64 = raid_dev->umbox64 + i; ccb->mbox = &ccb->mbox64->mbox32; ccb->raw_mbox = (uint8_t *)ccb->mbox; scb->gp = 0; // COMMAND ID 0 - (MBOX_MAX_SCSI_CMDS-1) ARE RESERVED FOR // COMMANDS COMING FROM IO SUBSYSTEM (MID-LAYER) scb->sno = i + MBOX_MAX_SCSI_CMDS; scb->scp = NULL; scb->state = SCB_FREE; scb->dma_direction = DMA_NONE; scb->dma_type = MRAID_DMA_NONE; scb->dev_channel = -1; scb->dev_target = -1; // put scb in the free pool list_add_tail(&scb->list, &adapter->uscb_pool); } adp.unique_id = adapter->unique_id; adp.drvr_type = DRVRTYPE_MBOX; adp.drvr_data = (unsigned long)adapter; adp.pdev = adapter->pdev; adp.issue_uioc = megaraid_mbox_mm_handler; adp.timeout = MBOX_RESET_WAIT + MBOX_RESET_EXT_WAIT; adp.max_kioc = MBOX_MAX_USER_CMDS; if ((rval = mraid_mm_register_adp(&adp)) != 0) { con_log(CL_ANN, (KERN_WARNING "megaraid mbox: did not register with CMM\n")); kfree(adapter->uscb_list); } return rval; } /** * megaraid_cmm_unregister - un-register with the management module * @adapter : HBA soft state * * Un-register with the management module. * FIXME: mgmt module must return failure for unregister if it has pending * commands in LLD. */ static int megaraid_cmm_unregister(adapter_t *adapter) { kfree(adapter->uscb_list); mraid_mm_unregister_adp(adapter->unique_id); return 0; } /** * megaraid_mbox_mm_handler - interface for CMM to issue commands to LLD * @drvr_data : LLD specific data * @kioc : CMM interface packet * @action : command action * * This routine is invoked whenever the Common Management Module (CMM) has a * command for us. The 'action' parameter specifies if this is a new command * or otherwise. */ static int megaraid_mbox_mm_handler(unsigned long drvr_data, uioc_t *kioc, uint32_t action) { adapter_t *adapter; if (action != IOCTL_ISSUE) { con_log(CL_ANN, (KERN_WARNING "megaraid: unsupported management action:%#2x\n", action)); return (-ENOTSUPP); } adapter = (adapter_t *)drvr_data; // make sure this adapter is not being detached right now. if (atomic_read(&adapter->being_detached)) { con_log(CL_ANN, (KERN_WARNING "megaraid: reject management request, detaching\n")); return (-ENODEV); } switch (kioc->opcode) { case GET_ADAP_INFO: kioc->status = gather_hbainfo(adapter, (mraid_hba_info_t *) (unsigned long)kioc->buf_vaddr); kioc->done(kioc); return kioc->status; case MBOX_CMD: return megaraid_mbox_mm_command(adapter, kioc); default: kioc->status = (-EINVAL); kioc->done(kioc); return (-EINVAL); } return 0; // not reached } /** * megaraid_mbox_mm_command - issues commands routed through CMM * @adapter : HBA soft state * @kioc : management command packet * * Issues commands, which are routed through the management module. */ static int megaraid_mbox_mm_command(adapter_t *adapter, uioc_t *kioc) { struct list_head *head = &adapter->uscb_pool; mbox64_t *mbox64; uint8_t *raw_mbox; scb_t *scb; mbox_ccb_t *ccb; unsigned long flags; // detach one scb from free pool spin_lock_irqsave(USER_FREE_LIST_LOCK(adapter), flags); if (list_empty(head)) { // should never happen because of CMM con_log(CL_ANN, (KERN_WARNING "megaraid mbox: bug in cmm handler, lost resources\n")); spin_unlock_irqrestore(USER_FREE_LIST_LOCK(adapter), flags); return (-EINVAL); } scb = list_entry(head->next, scb_t, list); list_del_init(&scb->list); spin_unlock_irqrestore(USER_FREE_LIST_LOCK(adapter), flags); scb->state = SCB_ACTIVE; scb->dma_type = MRAID_DMA_NONE; scb->dma_direction = DMA_NONE; ccb = (mbox_ccb_t *)scb->ccb; mbox64 = (mbox64_t *)(unsigned long)kioc->cmdbuf; raw_mbox = (uint8_t *)&mbox64->mbox32; memcpy(ccb->mbox64, mbox64, sizeof(mbox64_t)); scb->gp = (unsigned long)kioc; /* * If it is a logdrv random delete operation, we have to wait till * there are no outstanding cmds at the fw and then issue it directly */ if (raw_mbox[0] == FC_DEL_LOGDRV && raw_mbox[2] == OP_DEL_LOGDRV) { if (wait_till_fw_empty(adapter)) { con_log(CL_ANN, (KERN_NOTICE "megaraid mbox: LD delete, timed out\n")); kioc->status = -ETIME; scb->status = -1; megaraid_mbox_mm_done(adapter, scb); return (-ETIME); } INIT_LIST_HEAD(&scb->list); scb->state = SCB_ISSUED; if (mbox_post_cmd(adapter, scb) != 0) { con_log(CL_ANN, (KERN_NOTICE "megaraid mbox: LD delete, mailbox busy\n")); kioc->status = -EBUSY; scb->status = -1; megaraid_mbox_mm_done(adapter, scb); return (-EBUSY); } return 0; } // put the command on the pending list and execute megaraid_mbox_runpendq(adapter, scb); return 0; } static int wait_till_fw_empty(adapter_t *adapter) { unsigned long flags = 0; int i; /* * Set the quiescent flag to stop issuing cmds to FW. */ spin_lock_irqsave(&adapter->lock, flags); adapter->quiescent++; spin_unlock_irqrestore(&adapter->lock, flags); /* * Wait till there are no more cmds outstanding at FW. Try for at most * 60 seconds */ for (i = 0; i < 60 && adapter->outstanding_cmds; i++) { con_log(CL_DLEVEL1, (KERN_INFO "megaraid: FW has %d pending commands\n", adapter->outstanding_cmds)); msleep(1000); } return adapter->outstanding_cmds; } /** * megaraid_mbox_mm_done - callback for CMM commands * @adapter : HBA soft state * @scb : completed command * * Callback routine for internal commands originated from the management * module. */ static void megaraid_mbox_mm_done(adapter_t *adapter, scb_t *scb) { uioc_t *kioc; mbox64_t *mbox64; uint8_t *raw_mbox; unsigned long flags; kioc = (uioc_t *)scb->gp; mbox64 = (mbox64_t *)(unsigned long)kioc->cmdbuf; mbox64->mbox32.status = scb->status; raw_mbox = (uint8_t *)&mbox64->mbox32; // put scb in the free pool scb->state = SCB_FREE; scb->scp = NULL; spin_lock_irqsave(USER_FREE_LIST_LOCK(adapter), flags); list_add(&scb->list, &adapter->uscb_pool); spin_unlock_irqrestore(USER_FREE_LIST_LOCK(adapter), flags); // if a delete logical drive operation succeeded, restart the // controller if (raw_mbox[0] == FC_DEL_LOGDRV && raw_mbox[2] == OP_DEL_LOGDRV) { adapter->quiescent--; megaraid_mbox_runpendq(adapter, NULL); } kioc->done(kioc); return; } /** * gather_hbainfo - HBA characteristics for the applications * @adapter : HBA soft state * @hinfo : pointer to the caller's host info strucuture */ static int gather_hbainfo(adapter_t *adapter, mraid_hba_info_t *hinfo) { hinfo->pci_vendor_id = adapter->pdev->vendor; hinfo->pci_device_id = adapter->pdev->device; hinfo->subsys_vendor_id = adapter->pdev->subsystem_vendor; hinfo->subsys_device_id = adapter->pdev->subsystem_device; hinfo->pci_bus = adapter->pdev->bus->number; hinfo->pci_dev_fn = adapter->pdev->devfn; hinfo->pci_slot = PCI_SLOT(adapter->pdev->devfn); hinfo->irq = adapter->host->irq; hinfo->baseport = ADAP2RAIDDEV(adapter)->baseport; hinfo->unique_id = (hinfo->pci_bus << 8) | adapter->pdev->devfn; hinfo->host_no = adapter->host->host_no; return 0; } /* * END: Interface for the common management module */ /** * megaraid_sysfs_alloc_resources - allocate sysfs related resources * @adapter : controller's soft state * * Allocate packets required to issue FW calls whenever the sysfs attributes * are read. These attributes would require up-to-date information from the * FW. Also set up resources for mutual exclusion to share these resources and * the wait queue. * * Return 0 on success. * Return -ERROR_CODE on failure. */ static int megaraid_sysfs_alloc_resources(adapter_t *adapter) { mraid_device_t *raid_dev = ADAP2RAIDDEV(adapter); int rval = 0; raid_dev->sysfs_uioc = kmalloc(sizeof(uioc_t), GFP_KERNEL); raid_dev->sysfs_mbox64 = kmalloc(sizeof(mbox64_t), GFP_KERNEL); raid_dev->sysfs_buffer = dma_alloc_coherent(&adapter->pdev->dev, PAGE_SIZE, &raid_dev->sysfs_buffer_dma, GFP_KERNEL); if (!raid_dev->sysfs_uioc || !raid_dev->sysfs_mbox64 || !raid_dev->sysfs_buffer) { con_log(CL_ANN, (KERN_WARNING "megaraid: out of memory, %s %d\n", __func__, __LINE__)); rval = -ENOMEM; megaraid_sysfs_free_resources(adapter); } mutex_init(&raid_dev->sysfs_mtx); init_waitqueue_head(&raid_dev->sysfs_wait_q); return rval; } /** * megaraid_sysfs_free_resources - free sysfs related resources * @adapter : controller's soft state * * Free packets allocated for sysfs FW commands */ static void megaraid_sysfs_free_resources(adapter_t *adapter) { mraid_device_t *raid_dev = ADAP2RAIDDEV(adapter); kfree(raid_dev->sysfs_uioc); kfree(raid_dev->sysfs_mbox64); if (raid_dev->sysfs_buffer) { dma_free_coherent(&adapter->pdev->dev, PAGE_SIZE, raid_dev->sysfs_buffer, raid_dev->sysfs_buffer_dma); } } /** * megaraid_sysfs_get_ldmap_done - callback for get ldmap * @uioc : completed packet * * Callback routine called in the ISR/tasklet context for get ldmap call */ static void megaraid_sysfs_get_ldmap_done(uioc_t *uioc) { adapter_t *adapter = (adapter_t *)uioc->buf_vaddr; mraid_device_t *raid_dev = ADAP2RAIDDEV(adapter); uioc->status = 0; wake_up(&raid_dev->sysfs_wait_q); } /** * megaraid_sysfs_get_ldmap_timeout - timeout handling for get ldmap * @t : timed out timer * * Timeout routine to recover and return to application, in case the adapter * has stopped responding. A timeout of 60 seconds for this command seems like * a good value. */ static void megaraid_sysfs_get_ldmap_timeout(struct timer_list *t) { struct uioc_timeout *timeout = from_timer(timeout, t, timer); uioc_t *uioc = timeout->uioc; adapter_t *adapter = (adapter_t *)uioc->buf_vaddr; mraid_device_t *raid_dev = ADAP2RAIDDEV(adapter); uioc->status = -ETIME; wake_up(&raid_dev->sysfs_wait_q); } /** * megaraid_sysfs_get_ldmap - get update logical drive map * @adapter : controller's soft state * * This routine will be called whenever user reads the logical drive * attributes, go get the current logical drive mapping table from the * firmware. We use the management API's to issue commands to the controller. * * NOTE: The commands issuance functionality is not generalized and * implemented in context of "get ld map" command only. If required, the * command issuance logical can be trivially pulled out and implemented as a * standalone library. For now, this should suffice since there is no other * user of this interface. * * Return 0 on success. * Return -1 on failure. */ static int megaraid_sysfs_get_ldmap(adapter_t *adapter) { mraid_device_t *raid_dev = ADAP2RAIDDEV(adapter); uioc_t *uioc; mbox64_t *mbox64; mbox_t *mbox; char *raw_mbox; struct uioc_timeout timeout; caddr_t ldmap; int rval = 0; /* * Allow only one read at a time to go through the sysfs attributes */ mutex_lock(&raid_dev->sysfs_mtx); uioc = raid_dev->sysfs_uioc; mbox64 = raid_dev->sysfs_mbox64; ldmap = raid_dev->sysfs_buffer; memset(uioc, 0, sizeof(uioc_t)); memset(mbox64, 0, sizeof(mbox64_t)); memset(ldmap, 0, sizeof(raid_dev->curr_ldmap)); mbox = &mbox64->mbox32; raw_mbox = (char *)mbox; uioc->cmdbuf = (uint64_t)(unsigned long)mbox64; uioc->buf_vaddr = (caddr_t)adapter; uioc->status = -ENODATA; uioc->done = megaraid_sysfs_get_ldmap_done; /* * Prepare the mailbox packet to get the current logical drive mapping * table */ mbox->xferaddr = (uint32_t)raid_dev->sysfs_buffer_dma; raw_mbox[0] = FC_DEL_LOGDRV; raw_mbox[2] = OP_GET_LDID_MAP; /* * Setup a timer to recover from a non-responding controller */ timeout.uioc = uioc; timer_setup_on_stack(&timeout.timer, megaraid_sysfs_get_ldmap_timeout, 0); timeout.timer.expires = jiffies + 60 * HZ; add_timer(&timeout.timer); /* * Send the command to the firmware */ rval = megaraid_mbox_mm_command(adapter, uioc); if (rval == 0) { // command successfully issued wait_event(raid_dev->sysfs_wait_q, (uioc->status != -ENODATA)); /* * Check if the command timed out */ if (uioc->status == -ETIME) { con_log(CL_ANN, (KERN_NOTICE "megaraid: sysfs get ld map timed out\n")); rval = -ETIME; } else { rval = mbox->status; } if (rval == 0) { memcpy(raid_dev->curr_ldmap, ldmap, sizeof(raid_dev->curr_ldmap)); } else { con_log(CL_ANN, (KERN_NOTICE "megaraid: get ld map failed with %x\n", rval)); } } else { con_log(CL_ANN, (KERN_NOTICE "megaraid: could not issue ldmap command:%x\n", rval)); } del_timer_sync(&timeout.timer); destroy_timer_on_stack(&timeout.timer); mutex_unlock(&raid_dev->sysfs_mtx); return rval; } /** * megaraid_mbox_app_hndl_show - display application handle for this adapter * @dev : class device object representation for the host * @attr : device attribute (unused) * @buf : buffer to send data to * * Display the handle used by the applications while executing management * tasks on the adapter. We invoke a management module API to get the adapter * handle, since we do not interface with applications directly. */ static ssize_t megaraid_mbox_app_hndl_show(struct device *dev, struct device_attribute *attr, char *buf) { struct Scsi_Host *shost = class_to_shost(dev); adapter_t *adapter = (adapter_t *)SCSIHOST2ADAP(shost); uint32_t app_hndl; app_hndl = mraid_mm_adapter_app_handle(adapter->unique_id); return sysfs_emit(buf, "%u\n", app_hndl); } /** * megaraid_mbox_ld_show - display the logical drive number for this device * @dev : device object representation for the scsi device * @attr : device attribute to show * @buf : buffer to send data to * * Display the logical drive number for the device in question, if it a valid * logical drive. For physical devices, "-1" is returned. * * The logical drive number is displayed in following format: * * <SCSI ID> <LD NUM> <LD STICKY ID> <APP ADAPTER HANDLE> * * <int> <int> <int> <int> */ static ssize_t megaraid_mbox_ld_show(struct device *dev, struct device_attribute *attr, char *buf) { struct scsi_device *sdev = to_scsi_device(dev); adapter_t *adapter = (adapter_t *)SCSIHOST2ADAP(sdev->host); mraid_device_t *raid_dev = ADAP2RAIDDEV(adapter); int scsi_id = -1; int logical_drv = -1; int ldid_map = -1; uint32_t app_hndl = 0; int mapped_sdev_id; int rval; int i; if (raid_dev->random_del_supported && MRAID_IS_LOGICAL_SDEV(adapter, sdev)) { rval = megaraid_sysfs_get_ldmap(adapter); if (rval == 0) { for (i = 0; i < MAX_LOGICAL_DRIVES_40LD; i++) { mapped_sdev_id = sdev->id; if (sdev->id > adapter->init_id) { mapped_sdev_id -= 1; } if (raid_dev->curr_ldmap[i] == mapped_sdev_id) { scsi_id = sdev->id; logical_drv = i; ldid_map = raid_dev->curr_ldmap[i]; app_hndl = mraid_mm_adapter_app_handle( adapter->unique_id); break; } } } else { con_log(CL_ANN, (KERN_NOTICE "megaraid: sysfs get ld map failed: %x\n", rval)); } } return sysfs_emit(buf, "%d %d %d %d\n", scsi_id, logical_drv, ldid_map, app_hndl); } /* * END: Mailbox Low Level Driver */ module_init(megaraid_init); module_exit(megaraid_exit); |