# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/phy/qcom,ipq8074-qmp-pcie-phy.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Qualcomm QMP PHY controller (PCIe, IPQ8074)

maintainers:
  - Vinod Koul <vkoul@kernel.org>

description:
  QMP PHY controller supports physical layer functionality for a number of
  controllers on Qualcomm chipsets, such as, PCIe, UFS, and USB.

  Note that these bindings are for SoCs up to SC8180X. For newer SoCs, see
  qcom,sc8280xp-qmp-pcie-phy.yaml.

properties:
  compatible:
    enum:
      - qcom,ipq6018-qmp-pcie-phy
      - qcom,ipq8074-qmp-gen3-pcie-phy
      - qcom,ipq8074-qmp-pcie-phy
      - qcom,msm8998-qmp-pcie-phy
      - qcom,sc8180x-qmp-pcie-phy
      - qcom,sdm845-qhp-pcie-phy
      - qcom,sdm845-qmp-pcie-phy
      - qcom,sdx55-qmp-pcie-phy
      - qcom,sm8250-qmp-gen3x1-pcie-phy
      - qcom,sm8250-qmp-gen3x2-pcie-phy
      - qcom,sm8250-qmp-modem-pcie-phy
      - qcom,sm8450-qmp-gen3x1-pcie-phy
      - qcom,sm8450-qmp-gen4x2-pcie-phy

  reg:
    items:
      - description: serdes

  "#address-cells":
    enum: [ 1, 2 ]

  "#size-cells":
    enum: [ 1, 2 ]

  ranges: true

  clocks:
    minItems: 2
    maxItems: 4

  clock-names:
    minItems: 2
    maxItems: 4

  resets:
    minItems: 1
    maxItems: 2

  reset-names:
    minItems: 1
    maxItems: 2

  vdda-phy-supply: true

  vdda-pll-supply: true

  vddp-ref-clk-supply: true

patternProperties:
  "^phy@[0-9a-f]+$":
    type: object
    description: single PHY-provider child node
    properties:
      reg:
        minItems: 3
        maxItems: 6

      clocks:
        items:
          - description: PIPE clock

      clock-names:
        deprecated: true
        items:
          - const: pipe0

      "#clock-cells":
        const: 0

      clock-output-names:
        maxItems: 1

      "#phy-cells":
        const: 0

    required:
      - reg
      - clocks
      - "#clock-cells"
      - clock-output-names
      - "#phy-cells"

    additionalProperties: false

required:
  - compatible
  - reg
  - "#address-cells"
  - "#size-cells"
  - ranges
  - clocks
  - clock-names
  - resets
  - reset-names

additionalProperties: false

allOf:
  - if:
      properties:
        compatible:
          contains:
            enum:
              - qcom,msm8998-qmp-pcie-phy
    then:
      properties:
        clocks:
          maxItems: 3
        clock-names:
          items:
            - const: aux
            - const: cfg_ahb
            - const: ref
        resets:
          maxItems: 2
        reset-names:
          items:
            - const: phy
            - const: common
      required:
        - vdda-phy-supply
        - vdda-pll-supply

  - if:
      properties:
        compatible:
          contains:
            enum:
              - qcom,ipq6018-qmp-pcie-phy
              - qcom,ipq8074-qmp-gen3-pcie-phy
              - qcom,ipq8074-qmp-pcie-phy
    then:
      properties:
        clocks:
          maxItems: 2
        clock-names:
          items:
            - const: aux
            - const: cfg_ahb
        resets:
          maxItems: 2
        reset-names:
          items:
            - const: phy
            - const: common

  - if:
      properties:
        compatible:
          contains:
            enum:
              - qcom,sc8180x-qmp-pcie-phy
              - qcom,sdm845-qhp-pcie-phy
              - qcom,sdm845-qmp-pcie-phy
              - qcom,sdx55-qmp-pcie-phy
              - qcom,sm8250-qmp-gen3x1-pcie-phy
              - qcom,sm8250-qmp-gen3x2-pcie-phy
              - qcom,sm8250-qmp-modem-pcie-phy
              - qcom,sm8450-qmp-gen3x1-pcie-phy
              - qcom,sm8450-qmp-gen4x2-pcie-phy
    then:
      properties:
        clocks:
          maxItems: 4
        clock-names:
          items:
            - const: aux
            - const: cfg_ahb
            - const: ref
            - const: refgen
        resets:
          maxItems: 1
        reset-names:
          items:
            - const: phy
      required:
        - vdda-phy-supply
        - vdda-pll-supply

  - if:
      properties:
        compatible:
          contains:
            enum:
              - qcom,sc8180x-qmp-pcie-phy
              - qcom,sm8250-qmp-gen3x2-pcie-phy
              - qcom,sm8250-qmp-modem-pcie-phy
              - qcom,sm8450-qmp-gen4x2-pcie-phy
    then:
      patternProperties:
        "^phy@[0-9a-f]+$":
          properties:
            reg:
              items:
                - description: TX lane 1
                - description: RX lane 1
                - description: PCS
                - description: TX lane 2
                - description: RX lane 2
                - description: PCS_MISC

  - if:
      properties:
        compatible:
          contains:
            enum:
              - qcom,sdm845-qmp-pcie-phy
              - qcom,sdx55-qmp-pcie-phy
              - qcom,sm8250-qmp-gen3x1-pcie-phy
              - qcom,sm8450-qmp-gen3x1-pcie-phy
    then:
      patternProperties:
        "^phy@[0-9a-f]+$":
          properties:
            reg:
              items:
                - description: TX
                - description: RX
                - description: PCS
                - description: PCS_MISC

  - if:
      properties:
        compatible:
          contains:
            enum:
              - qcom,ipq6018-qmp-pcie-phy
              - qcom,ipq8074-qmp-pcie-phy
              - qcom,msm8998-qmp-pcie-phy
              - qcom,sdm845-qhp-pcie-phy
    then:
      patternProperties:
        "^phy@[0-9a-f]+$":
          properties:
            reg:
              items:
                - description: TX
                - description: RX
                - description: PCS

examples:
  - |
    #include <dt-bindings/clock/qcom,gcc-sm8250.h>
    phy-wrapper@1c0e000 {
        compatible = "qcom,sm8250-qmp-gen3x2-pcie-phy";
        reg = <0x01c0e000 0x1c0>;
        #address-cells = <1>;
        #size-cells = <1>;
        ranges = <0x0 0x01c0e000 0x1000>;

        clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
                 <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
                 <&gcc GCC_PCIE_WIGIG_CLKREF_EN>,
                 <&gcc GCC_PCIE1_PHY_REFGEN_CLK>;
        clock-names = "aux", "cfg_ahb", "ref", "refgen";

        resets = <&gcc GCC_PCIE_1_PHY_BCR>;
        reset-names = "phy";

        vdda-phy-supply = <&vreg_l10c_0p88>;
        vdda-pll-supply = <&vreg_l6b_1p2>;

        phy@200 {
            reg = <0x200 0x170>,
                  <0x400 0x200>,
                  <0xa00 0x1f0>,
                  <0x600 0x170>,
                  <0x800 0x200>,
                  <0xe00 0xf4>;

            clocks = <&gcc GCC_PCIE_1_PIPE_CLK>;

            #clock-cells = <0>;
            clock-output-names = "pcie_1_pipe_clk";

            #phy-cells = <0>;
        };
    };