Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 593 594 595 596 597 598 599 600 601 602 603 604 605 606 607 608 609 610 611 612 613 614 615 616 617 618 619 620 621 622 623 624 625 626 627 628 629 630 631 632 633 634 635 636 637 638 639 640 641 642 643 644 645 646 647 648 649 650 651 652 653 654 655 656 657 658 659 660 661 662 663 664 665 666 667 668 669 670 671 672 673 674 675 676 677 678 679 680 681 682 683 684 685 686 687 688 689 690 691 692 693 694 695 696 697 698 699 700 701 702 703 704 705 706 707 708 709 710 711 712 713 714 715 716 717 718 719 720 721 722 723 724 725 726 727 728 729 730 731 732 733 734 735 736 737 738 739 740 741 742 743 744 745 746 747 748 749 750 751 752 753 754 755 756 757 758 759 760 761 762 763 764 765 766 767 768 769 770 771 772 773 774 775 776 777 778 779 780 781 782 783 784 785 786 787 788 789 790 791 792 793 794 795 796 797 798 799 800 801 802 803 804 805 806 807 808 809 810 811 812 813 814 815 816 817 818 819 820 821 822 823 824 825 826 827 828 829 830 831 832 833 834 835 836 837 838 839 840 841 842 843 844 845 846 847 848 849 850 851 852 853 854 855 856 857 858 859 860 861 862 863 864 865 866 867 868 869 870 871 872 873 874 875 876 877 878 879 880 881 882 883 884 885 886 887 888 889 890 891 892 893 894 895 896 897 898 899 900 901 902 903 904 905 906 907 908 909 910 911 912 913 914 915 916 917 918 919 920 921 922 923 924 925 926 927 928 929 930 931 932 933 934 935 936 937 938 939 940 941 942 943 944 945 946 947 948 949 950 951 952 953 954 955 956 957 958 959 960 961 962 963 964 965 966 967 968 969 970 971 972 | #!/bin/bash # SPDX-License-Identifier: GPL-2.0 # # Test various interface configuration scenarios. Observe that configurations # deemed valid by mlxsw succeed, invalid configurations fail and that no traces # are produced. To prevent the test from passing in case traces are produced, # the user can set the 'kernel.panic_on_warn' and 'kernel.panic_on_oops' # sysctls in its environment. lib_dir=$(dirname $0)/../../../net/forwarding ALL_TESTS=" rif_vrf_set_addr_test rif_non_inherit_bridge_addr_test vlan_interface_deletion_test bridge_deletion_test bridge_vlan_flags_test vlan_1_test lag_bridge_upper_test duplicate_vlans_test vlan_rif_refcount_test subport_rif_refcount_test subport_rif_lag_join_test vlan_dev_deletion_test lag_unlink_slaves_test lag_dev_deletion_test vlan_interface_uppers_test bridge_extern_learn_test neigh_offload_test nexthop_offload_test nexthop_obj_invalid_test nexthop_obj_offload_test nexthop_obj_group_offload_test nexthop_obj_bucket_offload_test nexthop_obj_blackhole_offload_test nexthop_obj_route_offload_test bridge_locked_port_test devlink_reload_test " NUM_NETIFS=2 : ${TIMEOUT:=20000} # ms source $lib_dir/lib.sh source $lib_dir/devlink_lib.sh setup_prepare() { swp1=${NETIFS[p1]} swp2=${NETIFS[p2]} ip link set dev $swp1 up ip link set dev $swp2 up } cleanup() { pre_cleanup ip link set dev $swp2 down ip link set dev $swp1 down } rif_vrf_set_addr_test() { # Test that it is possible to set an IP address on a VRF upper despite # its random MAC address. RET=0 ip link add name vrf-test type vrf table 10 ip link set dev $swp1 master vrf-test ip -4 address add 192.0.2.1/24 dev vrf-test check_err $? "failed to set IPv4 address on VRF" ip -6 address add 2001:db8:1::1/64 dev vrf-test check_err $? "failed to set IPv6 address on VRF" log_test "RIF - setting IP address on VRF" ip link del dev vrf-test } rif_non_inherit_bridge_addr_test() { local swp2_mac=$(mac_get $swp2) RET=0 # Create first RIF ip addr add dev $swp1 192.0.2.1/28 check_err $? # Create a FID RIF ip link add name br1 up type bridge vlan_filtering 0 ip link set dev br1 addr $swp2_mac ip link set dev $swp2 master br1 ip addr add dev br1 192.0.2.17/28 check_err $? # Prepare a device with a low MAC address ip link add name d up type dummy ip link set dev d addr 00:11:22:33:44:55 # Attach the device to br1. Since the bridge address was set, it should # work. ip link set dev d master br1 &>/dev/null check_err $? "Could not attach a device with low MAC to a bridge with RIF" # Port MAC address change should be allowed for a bridge with set MAC. ip link set dev $swp2 addr 00:11:22:33:44:55 check_err $? "Changing swp2's MAC address not permitted" log_test "RIF - attach port with bad MAC to bridge with set MAC" ip link set dev $swp2 addr $swp2_mac ip link del dev d ip link del dev br1 ip addr del dev $swp1 192.0.2.1/28 } vlan_interface_deletion_test() { # Test that when a VLAN interface is deleted, its associated router # interface (RIF) is correctly deleted and not leaked. See commit # c360867ec46a ("mlxsw: spectrum: Delete RIF when VLAN device is # removed") for more details RET=0 ip link add name br0 type bridge vlan_filtering 1 ip link set dev $swp1 master br0 ip link add link br0 name br0.10 type vlan id 10 ip -6 address add 2001:db8:1::1/64 dev br0.10 ip link del dev br0.10 # If we leaked the previous RIF, then this should produce a trace ip link add link br0 name br0.20 type vlan id 20 ip -6 address add 2001:db8:1::1/64 dev br0.20 ip link del dev br0.20 log_test "vlan interface deletion" ip link del dev br0 } bridge_deletion_test() { # Test that when a bridge with VLAN interfaces is deleted, we correctly # delete the associated RIFs. See commit 602b74eda813 ("mlxsw: # spectrum_switchdev: Do not leak RIFs when removing bridge") for more # details RET=0 ip link add name br0 type bridge vlan_filtering 1 ip link set dev $swp1 master br0 ip -6 address add 2001:db8::1/64 dev br0 ip link add link br0 name br0.10 type vlan id 10 ip -6 address add 2001:db8:1::1/64 dev br0.10 ip link add link br0 name br0.20 type vlan id 20 ip -6 address add 2001:db8:2::1/64 dev br0.20 ip link del dev br0 # If we leaked previous RIFs, then this should produce a trace ip -6 address add 2001:db8:1::1/64 dev $swp1 ip -6 address del 2001:db8:1::1/64 dev $swp1 log_test "bridge deletion" } bridge_vlan_flags_test() { # Test that when bridge VLAN flags are toggled, we do not take # unnecessary references on related structs. See commit 9e25826ffc94 # ("mlxsw: spectrum_switchdev: Fix port_vlan refcounting") for more # details RET=0 ip link add name br0 type bridge vlan_filtering 1 ip link set dev $swp1 master br0 bridge vlan add vid 10 dev $swp1 pvid untagged bridge vlan add vid 10 dev $swp1 untagged bridge vlan add vid 10 dev $swp1 pvid bridge vlan add vid 10 dev $swp1 ip link del dev br0 # If we did not handle references correctly, then this should produce a # trace devlink dev reload "$DEVLINK_DEV" # Allow netdevices to be re-created following the reload sleep 20 log_test "bridge vlan flags" } vlan_1_test() { # Test that VLAN 1 can be configured over mlxsw ports. In the past it # was used internally for untagged traffic. See commit 47bf9df2e820 # ("mlxsw: spectrum: Forbid creation of VLAN 1 over port/LAG") for more # details RET=0 ip link add link $swp1 name $swp1.1 type vlan id 1 check_err $? "did not manage to create vlan 1 when should" log_test "vlan 1" ip link del dev $swp1.1 } lag_bridge_upper_test() { # Test that ports cannot be enslaved to LAG devices that have uppers # and that failure is handled gracefully. See commit b3529af6bb0d # ("spectrum: Reference count VLAN entries") for more details RET=0 ip link add name bond1 type bond mode 802.3ad ip link add name br0 type bridge vlan_filtering 1 ip link set dev bond1 master br0 ip link set dev $swp1 down ip link set dev $swp1 master bond1 &> /dev/null check_fail $? "managed to enslave port to lag when should not" # This might generate a trace, if we did not handle the failure # correctly ip -6 address add 2001:db8:1::1/64 dev $swp1 ip -6 address del 2001:db8:1::1/64 dev $swp1 log_test "lag with bridge upper" ip link del dev br0 ip link del dev bond1 } duplicate_vlans_test() { # Test that on a given port a VLAN is only used once. Either as VLAN # in a VLAN-aware bridge or as a VLAN device RET=0 ip link add name br0 type bridge vlan_filtering 1 ip link set dev $swp1 master br0 bridge vlan add vid 10 dev $swp1 ip link add link $swp1 name $swp1.10 type vlan id 10 &> /dev/null check_fail $? "managed to create vlan device when should not" bridge vlan del vid 10 dev $swp1 ip link add link $swp1 name $swp1.10 type vlan id 10 check_err $? "did not manage to create vlan device when should" bridge vlan add vid 10 dev $swp1 &> /dev/null check_fail $? "managed to add bridge vlan when should not" log_test "duplicate vlans" ip link del dev $swp1.10 ip link del dev br0 } vlan_rif_refcount_test() { # Test that RIFs representing VLAN interfaces are not affected from # ports member in the VLAN. We use the offload indication on routes # configured on the RIF to understand if it was created / destroyed RET=0 ip link add name br0 type bridge vlan_filtering 1 ip link set dev $swp1 master br0 ip link set dev $swp1 up ip link set dev br0 up ip link add link br0 name br0.10 up type vlan id 10 ip -6 address add 2001:db8:1::1/64 dev br0.10 busywait "$TIMEOUT" wait_for_offload \ ip -6 route get fibmatch 2001:db8:1::2 dev br0.10 check_err $? "vlan rif was not created before adding port to vlan" bridge vlan add vid 10 dev $swp1 busywait "$TIMEOUT" wait_for_offload \ ip -6 route get fibmatch 2001:db8:1::2 dev br0.10 check_err $? "vlan rif was destroyed after adding port to vlan" bridge vlan del vid 10 dev $swp1 busywait "$TIMEOUT" wait_for_offload \ ip -6 route get fibmatch 2001:db8:1::2 dev br0.10 check_err $? "vlan rif was destroyed after removing port from vlan" ip link set dev $swp1 nomaster busywait "$TIMEOUT" not wait_for_offload \ ip -6 route get fibmatch 2001:db8:1::2 dev br0.10 check_err $? "vlan rif was not destroyed after unlinking port from bridge" log_test "vlan rif refcount" ip link del dev br0.10 ip link set dev $swp1 down ip link del dev br0 } subport_rif_refcount_test() { # Test that RIFs representing upper devices of physical ports are # reference counted correctly and destroyed when should. We use the # offload indication on routes configured on the RIF to understand if # it was created / destroyed RET=0 ip link add name bond1 type bond mode 802.3ad ip link set dev $swp1 down ip link set dev $swp2 down ip link set dev $swp1 master bond1 ip link set dev $swp2 master bond1 ip link set dev bond1 up ip link add link bond1 name bond1.10 up type vlan id 10 ip -6 address add 2001:db8:1::1/64 dev bond1 ip -6 address add 2001:db8:2::1/64 dev bond1.10 busywait "$TIMEOUT" wait_for_offload \ ip -6 route get fibmatch 2001:db8:1::2 dev bond1 check_err $? "subport rif was not created on lag device" busywait "$TIMEOUT" wait_for_offload \ ip -6 route get fibmatch 2001:db8:2::2 dev bond1.10 check_err $? "subport rif was not created on vlan device" ip link set dev $swp1 nomaster busywait "$TIMEOUT" wait_for_offload \ ip -6 route get fibmatch 2001:db8:1::2 dev bond1 check_err $? "subport rif of lag device was destroyed when should not" busywait "$TIMEOUT" wait_for_offload \ ip -6 route get fibmatch 2001:db8:2::2 dev bond1.10 check_err $? "subport rif of vlan device was destroyed when should not" ip link set dev $swp2 nomaster busywait "$TIMEOUT" not wait_for_offload \ ip -6 route get fibmatch 2001:db8:1::2 dev bond1 check_err $? "subport rif of lag device was not destroyed when should" busywait "$TIMEOUT" not wait_for_offload \ ip -6 route get fibmatch 2001:db8:2::2 dev bond1.10 check_err $? "subport rif of vlan device was not destroyed when should" log_test "subport rif refcount" ip link del dev bond1.10 ip link del dev bond1 } subport_rif_lag_join_test() { # Test that the reference count of a RIF configured for a LAG is # incremented / decremented when ports join / leave the LAG. We use the # offload indication on routes configured on the RIF to understand if # it was created / destroyed RET=0 ip link add name bond1 type bond mode 802.3ad ip link set dev $swp1 down ip link set dev $swp2 down ip link set dev $swp1 master bond1 ip link set dev $swp2 master bond1 ip link set dev bond1 up ip -6 address add 2001:db8:1::1/64 dev bond1 busywait "$TIMEOUT" wait_for_offload \ ip -6 route get fibmatch 2001:db8:1::2 dev bond1 check_err $? "subport rif was not created on lag device" ip link set dev $swp1 nomaster busywait "$TIMEOUT" wait_for_offload \ ip -6 route get fibmatch 2001:db8:1::2 dev bond1 check_err $? "subport rif of lag device was destroyed after removing one port" ip link set dev $swp1 master bond1 ip link set dev $swp2 nomaster busywait "$TIMEOUT" wait_for_offload \ ip -6 route get fibmatch 2001:db8:1::2 dev bond1 check_err $? "subport rif of lag device was destroyed after re-adding a port and removing another" ip link set dev $swp1 nomaster busywait "$TIMEOUT" not wait_for_offload \ ip -6 route get fibmatch 2001:db8:1::2 dev bond1 check_err $? "subport rif of lag device was not destroyed when should" log_test "subport rif lag join" ip link del dev bond1 } vlan_dev_deletion_test() { # Test that VLAN devices are correctly deleted / unlinked when enslaved # to bridge RET=0 ip link add name br10 type bridge ip link add name br20 type bridge ip link add name br30 type bridge ip link add link $swp1 name $swp1.10 type vlan id 10 ip link add link $swp1 name $swp1.20 type vlan id 20 ip link add link $swp1 name $swp1.30 type vlan id 30 ip link set dev $swp1.10 master br10 ip link set dev $swp1.20 master br20 ip link set dev $swp1.30 master br30 # If we did not handle the situation correctly, then these operations # might produce a trace ip link set dev $swp1.30 nomaster ip link del dev $swp1.20 # Deletion via ioctl uses different code paths from netlink vconfig rem $swp1.10 &> /dev/null log_test "vlan device deletion" ip link del dev $swp1.30 ip link del dev br30 ip link del dev br20 ip link del dev br10 } lag_create() { ip link add name bond1 type bond mode 802.3ad ip link set dev $swp1 down ip link set dev $swp2 down ip link set dev $swp1 master bond1 ip link set dev $swp2 master bond1 ip link add link bond1 name bond1.10 type vlan id 10 ip link add link bond1 name bond1.20 type vlan id 20 ip link add name br0 type bridge vlan_filtering 1 ip link set dev bond1 master br0 ip link add name br10 type bridge ip link set dev bond1.10 master br10 ip link add name br20 type bridge ip link set dev bond1.20 master br20 } lag_unlink_slaves_test() { # Test that ports are correctly unlinked from their LAG master, when # the LAG and its VLAN uppers are enslaved to bridges RET=0 lag_create ip link set dev $swp1 nomaster check_err $? "lag slave $swp1 was not unlinked from master" ip link set dev $swp2 nomaster check_err $? "lag slave $swp2 was not unlinked from master" # Try to configure corresponding VLANs as router interfaces ip -6 address add 2001:db8:1::1/64 dev $swp1 check_err $? "failed to configure ip address on $swp1" ip link add link $swp1 name $swp1.10 type vlan id 10 ip -6 address add 2001:db8:10::1/64 dev $swp1.10 check_err $? "failed to configure ip address on $swp1.10" ip link add link $swp1 name $swp1.20 type vlan id 20 ip -6 address add 2001:db8:20::1/64 dev $swp1.20 check_err $? "failed to configure ip address on $swp1.20" log_test "lag slaves unlinking" ip link del dev $swp1.20 ip link del dev $swp1.10 ip address flush dev $swp1 ip link del dev br20 ip link del dev br10 ip link del dev br0 ip link del dev bond1 } lag_dev_deletion_test() { # Test that LAG device is correctly deleted, when the LAG and its VLAN # uppers are enslaved to bridges RET=0 lag_create ip link del dev bond1 log_test "lag device deletion" ip link del dev br20 ip link del dev br10 ip link del dev br0 } vlan_interface_uppers_test() { # Test that uppers of a VLAN interface are correctly sanitized RET=0 ip link add name br0 type bridge vlan_filtering 1 ip link set dev $swp1 master br0 ip link add link br0 name br0.10 type vlan id 10 ip link add link br0.10 name macvlan0 \ type macvlan mode private &> /dev/null check_fail $? "managed to create a macvlan when should not" ip -6 address add 2001:db8:1::1/64 dev br0.10 ip link add link br0.10 name macvlan0 type macvlan mode private check_err $? "did not manage to create a macvlan when should" ip link del dev macvlan0 ip link add name vrf-test type vrf table 10 ip link set dev br0.10 master vrf-test check_err $? "did not manage to enslave vlan interface to vrf" ip link del dev vrf-test ip link add name br-test type bridge ip link set dev br0.10 master br-test &> /dev/null check_fail $? "managed to enslave vlan interface to bridge when should not" ip link del dev br-test log_test "vlan interface uppers" ip link del dev br0 } bridge_extern_learn_test() { # Test that externally learned entries added from user space are # marked as offloaded RET=0 ip link add name br0 type bridge ip link set dev $swp1 master br0 bridge fdb add de:ad:be:ef:13:37 dev $swp1 master extern_learn busywait "$TIMEOUT" wait_for_offload \ bridge fdb show brport $swp1 de:ad:be:ef:13:37 check_err $? "fdb entry not marked as offloaded when should" log_test "externally learned fdb entry" ip link del dev br0 } neigh_offload_test() { # Test that IPv4 and IPv6 neighbour entries are marked as offloaded RET=0 ip -4 address add 192.0.2.1/24 dev $swp1 ip -6 address add 2001:db8:1::1/64 dev $swp1 ip -4 neigh add 192.0.2.2 lladdr de:ad:be:ef:13:37 nud perm dev $swp1 ip -6 neigh add 2001:db8:1::2 lladdr de:ad:be:ef:13:37 nud perm \ dev $swp1 busywait "$TIMEOUT" wait_for_offload \ ip -4 neigh show dev $swp1 192.0.2.2 check_err $? "ipv4 neigh entry not marked as offloaded when should" busywait "$TIMEOUT" wait_for_offload \ ip -6 neigh show dev $swp1 2001:db8:1::2 check_err $? "ipv6 neigh entry not marked as offloaded when should" log_test "neighbour offload indication" ip -6 neigh del 2001:db8:1::2 dev $swp1 ip -4 neigh del 192.0.2.2 dev $swp1 ip -6 address del 2001:db8:1::1/64 dev $swp1 ip -4 address del 192.0.2.1/24 dev $swp1 } nexthop_offload_test() { # Test that IPv4 and IPv6 nexthops are marked as offloaded RET=0 sysctl_set net.ipv6.conf.$swp2.keep_addr_on_down 1 simple_if_init $swp1 192.0.2.1/24 2001:db8:1::1/64 simple_if_init $swp2 192.0.2.2/24 2001:db8:1::2/64 setup_wait ip -4 route add 198.51.100.0/24 vrf v$swp1 \ nexthop via 192.0.2.2 dev $swp1 ip -6 route add 2001:db8:2::/64 vrf v$swp1 \ nexthop via 2001:db8:1::2 dev $swp1 busywait "$TIMEOUT" wait_for_offload \ ip -4 route show 198.51.100.0/24 vrf v$swp1 check_err $? "ipv4 nexthop not marked as offloaded when should" busywait "$TIMEOUT" wait_for_offload \ ip -6 route show 2001:db8:2::/64 vrf v$swp1 check_err $? "ipv6 nexthop not marked as offloaded when should" ip link set dev $swp2 down sleep 1 busywait "$TIMEOUT" not wait_for_offload \ ip -4 route show 198.51.100.0/24 vrf v$swp1 check_err $? "ipv4 nexthop marked as offloaded when should not" busywait "$TIMEOUT" not wait_for_offload \ ip -6 route show 2001:db8:2::/64 vrf v$swp1 check_err $? "ipv6 nexthop marked as offloaded when should not" ip link set dev $swp2 up setup_wait busywait "$TIMEOUT" wait_for_offload \ ip -4 route show 198.51.100.0/24 vrf v$swp1 check_err $? "ipv4 nexthop not marked as offloaded after neigh add" busywait "$TIMEOUT" wait_for_offload \ ip -6 route show 2001:db8:2::/64 vrf v$swp1 check_err $? "ipv6 nexthop not marked as offloaded after neigh add" log_test "nexthop offload indication" ip -6 route del 2001:db8:2::/64 vrf v$swp1 ip -4 route del 198.51.100.0/24 vrf v$swp1 simple_if_fini $swp2 192.0.2.2/24 2001:db8:1::2/64 simple_if_fini $swp1 192.0.2.1/24 2001:db8:1::1/64 sysctl_restore net.ipv6.conf.$swp2.keep_addr_on_down } nexthop_obj_invalid_test() { # Test that invalid nexthop object configurations are rejected RET=0 simple_if_init $swp1 192.0.2.1/24 2001:db8:1::1/64 simple_if_init $swp2 192.0.2.2/24 2001:db8:1::2/64 setup_wait ip nexthop add id 1 via 192.0.2.3 fdb check_fail $? "managed to configure an FDB nexthop when should not" ip nexthop add id 1 encap mpls 200/300 via 192.0.2.3 dev $swp1 check_fail $? "managed to configure a nexthop with MPLS encap when should not" ip nexthop add id 1 dev $swp1 ip nexthop add id 2 dev $swp1 ip nexthop add id 3 via 192.0.2.3 dev $swp1 ip nexthop add id 10 group 1/2 check_fail $? "managed to configure a nexthop group with device-only nexthops when should not" ip nexthop add id 10 group 3 type resilient buckets 7 check_fail $? "managed to configure a too small resilient nexthop group when should not" ip nexthop add id 10 group 3 type resilient buckets 129 check_fail $? "managed to configure a resilient nexthop group with invalid number of buckets when should not" ip nexthop add id 10 group 1/2 type resilient buckets 32 check_fail $? "managed to configure a resilient nexthop group with device-only nexthops when should not" ip nexthop add id 10 group 3 type resilient buckets 32 check_err $? "failed to configure a valid resilient nexthop group" ip nexthop replace id 3 dev $swp1 check_fail $? "managed to populate a nexthop bucket with a device-only nexthop when should not" log_test "nexthop objects - invalid configurations" ip nexthop del id 10 ip nexthop del id 3 ip nexthop del id 2 ip nexthop del id 1 simple_if_fini $swp2 192.0.2.2/24 2001:db8:1::2/64 simple_if_fini $swp1 192.0.2.1/24 2001:db8:1::1/64 } nexthop_obj_offload_test() { # Test offload indication of nexthop objects RET=0 simple_if_init $swp1 192.0.2.1/24 2001:db8:1::1/64 simple_if_init $swp2 setup_wait ip nexthop add id 1 via 192.0.2.2 dev $swp1 ip neigh replace 192.0.2.2 lladdr 00:11:22:33:44:55 nud perm \ dev $swp1 busywait "$TIMEOUT" wait_for_offload \ ip nexthop show id 1 check_err $? "nexthop not marked as offloaded when should" ip neigh replace 192.0.2.2 nud failed dev $swp1 busywait "$TIMEOUT" not wait_for_offload \ ip nexthop show id 1 check_err $? "nexthop marked as offloaded after setting neigh to failed state" ip neigh replace 192.0.2.2 lladdr 00:11:22:33:44:55 nud perm \ dev $swp1 busywait "$TIMEOUT" wait_for_offload \ ip nexthop show id 1 check_err $? "nexthop not marked as offloaded after neigh replace" ip nexthop replace id 1 via 192.0.2.3 dev $swp1 busywait "$TIMEOUT" not wait_for_offload \ ip nexthop show id 1 check_err $? "nexthop marked as offloaded after replacing to use an invalid address" ip nexthop replace id 1 via 192.0.2.2 dev $swp1 busywait "$TIMEOUT" wait_for_offload \ ip nexthop show id 1 check_err $? "nexthop not marked as offloaded after replacing to use a valid address" log_test "nexthop objects offload indication" ip neigh del 192.0.2.2 dev $swp1 ip nexthop del id 1 simple_if_fini $swp2 simple_if_fini $swp1 192.0.2.1/24 2001:db8:1::1/64 } nexthop_obj_group_offload_test() { # Test offload indication of nexthop group objects RET=0 simple_if_init $swp1 192.0.2.1/24 2001:db8:1::1/64 simple_if_init $swp2 setup_wait ip nexthop add id 1 via 192.0.2.2 dev $swp1 ip nexthop add id 2 via 2001:db8:1::2 dev $swp1 ip nexthop add id 10 group 1/2 ip neigh replace 192.0.2.2 lladdr 00:11:22:33:44:55 nud perm \ dev $swp1 ip neigh replace 192.0.2.3 lladdr 00:11:22:33:44:55 nud perm \ dev $swp1 ip neigh replace 2001:db8:1::2 lladdr 00:11:22:33:44:55 nud perm \ dev $swp1 busywait "$TIMEOUT" wait_for_offload \ ip nexthop show id 1 check_err $? "IPv4 nexthop not marked as offloaded when should" busywait "$TIMEOUT" wait_for_offload \ ip nexthop show id 2 check_err $? "IPv6 nexthop not marked as offloaded when should" busywait "$TIMEOUT" wait_for_offload \ ip nexthop show id 10 check_err $? "nexthop group not marked as offloaded when should" # Invalidate nexthop id 1 ip neigh replace 192.0.2.2 nud failed dev $swp1 busywait "$TIMEOUT" not wait_for_offload \ ip nexthop show id 10 check_fail $? "nexthop group not marked as offloaded with one valid nexthop" # Invalidate nexthop id 2 ip neigh replace 2001:db8:1::2 nud failed dev $swp1 busywait "$TIMEOUT" not wait_for_offload \ ip nexthop show id 10 check_err $? "nexthop group marked as offloaded when should not" # Revalidate nexthop id 1 ip nexthop replace id 1 via 192.0.2.3 dev $swp1 busywait "$TIMEOUT" wait_for_offload \ ip nexthop show id 10 check_err $? "nexthop group not marked as offloaded after revalidating nexthop" log_test "nexthop group objects offload indication" ip neigh del 2001:db8:1::2 dev $swp1 ip neigh del 192.0.2.3 dev $swp1 ip neigh del 192.0.2.2 dev $swp1 ip nexthop del id 10 ip nexthop del id 2 ip nexthop del id 1 simple_if_fini $swp2 simple_if_fini $swp1 192.0.2.1/24 2001:db8:1::1/64 } nexthop_obj_bucket_offload_test() { # Test offload indication of nexthop buckets RET=0 simple_if_init $swp1 192.0.2.1/24 2001:db8:1::1/64 simple_if_init $swp2 setup_wait ip nexthop add id 1 via 192.0.2.2 dev $swp1 ip nexthop add id 2 via 2001:db8:1::2 dev $swp1 ip nexthop add id 10 group 1/2 type resilient buckets 32 idle_timer 0 ip neigh replace 192.0.2.2 lladdr 00:11:22:33:44:55 nud perm \ dev $swp1 ip neigh replace 192.0.2.3 lladdr 00:11:22:33:44:55 nud perm \ dev $swp1 ip neigh replace 2001:db8:1::2 lladdr 00:11:22:33:44:55 nud perm \ dev $swp1 busywait "$TIMEOUT" wait_for_offload \ ip nexthop bucket show nhid 1 check_err $? "IPv4 nexthop buckets not marked as offloaded when should" busywait "$TIMEOUT" wait_for_offload \ ip nexthop bucket show nhid 2 check_err $? "IPv6 nexthop buckets not marked as offloaded when should" # Invalidate nexthop id 1 ip neigh replace 192.0.2.2 nud failed dev $swp1 busywait "$TIMEOUT" wait_for_trap \ ip nexthop bucket show nhid 1 check_err $? "IPv4 nexthop buckets not marked with trap when should" # Invalidate nexthop id 2 ip neigh replace 2001:db8:1::2 nud failed dev $swp1 busywait "$TIMEOUT" wait_for_trap \ ip nexthop bucket show nhid 2 check_err $? "IPv6 nexthop buckets not marked with trap when should" # Revalidate nexthop id 1 by changing its configuration ip nexthop replace id 1 via 192.0.2.3 dev $swp1 busywait "$TIMEOUT" wait_for_offload \ ip nexthop bucket show nhid 1 check_err $? "nexthop bucket not marked as offloaded after revalidating nexthop" # Revalidate nexthop id 2 by changing its neighbour ip neigh replace 2001:db8:1::2 lladdr 00:11:22:33:44:55 nud perm \ dev $swp1 busywait "$TIMEOUT" wait_for_offload \ ip nexthop bucket show nhid 2 check_err $? "nexthop bucket not marked as offloaded after revalidating neighbour" log_test "nexthop bucket offload indication" ip neigh del 2001:db8:1::2 dev $swp1 ip neigh del 192.0.2.3 dev $swp1 ip neigh del 192.0.2.2 dev $swp1 ip nexthop del id 10 ip nexthop del id 2 ip nexthop del id 1 simple_if_fini $swp2 simple_if_fini $swp1 192.0.2.1/24 2001:db8:1::1/64 } nexthop_obj_blackhole_offload_test() { # Test offload indication of blackhole nexthop objects RET=0 ip nexthop add id 1 blackhole busywait "$TIMEOUT" wait_for_offload \ ip nexthop show id 1 check_err $? "Blackhole nexthop not marked as offloaded when should" ip nexthop add id 10 group 1 busywait "$TIMEOUT" wait_for_offload \ ip nexthop show id 10 check_err $? "Nexthop group not marked as offloaded when should" log_test "blackhole nexthop objects offload indication" ip nexthop del id 10 ip nexthop del id 1 } nexthop_obj_route_offload_test() { # Test offload indication of routes using nexthop objects RET=0 simple_if_init $swp1 192.0.2.1/24 2001:db8:1::1/64 simple_if_init $swp2 setup_wait ip nexthop add id 1 via 192.0.2.2 dev $swp1 ip neigh replace 192.0.2.2 lladdr 00:11:22:33:44:55 nud perm \ dev $swp1 ip neigh replace 192.0.2.3 lladdr 00:11:22:33:44:55 nud perm \ dev $swp1 ip route replace 198.51.100.0/24 nhid 1 busywait "$TIMEOUT" wait_for_offload \ ip route show 198.51.100.0/24 check_err $? "route not marked as offloaded when using valid nexthop" ip nexthop replace id 1 via 192.0.2.3 dev $swp1 busywait "$TIMEOUT" wait_for_offload \ ip route show 198.51.100.0/24 check_err $? "route not marked as offloaded after replacing valid nexthop with a valid one" ip nexthop replace id 1 via 192.0.2.4 dev $swp1 busywait "$TIMEOUT" not wait_for_offload \ ip route show 198.51.100.0/24 check_err $? "route marked as offloaded after replacing valid nexthop with an invalid one" ip nexthop replace id 1 via 192.0.2.2 dev $swp1 busywait "$TIMEOUT" wait_for_offload \ ip route show 198.51.100.0/24 check_err $? "route not marked as offloaded after replacing invalid nexthop with a valid one" log_test "routes using nexthop objects offload indication" ip route del 198.51.100.0/24 ip neigh del 192.0.2.3 dev $swp1 ip neigh del 192.0.2.2 dev $swp1 ip nexthop del id 1 simple_if_fini $swp2 simple_if_fini $swp1 192.0.2.1/24 2001:db8:1::1/64 } bridge_locked_port_test() { RET=0 ip link add name br1 up type bridge vlan_filtering 0 ip link add link $swp1 name $swp1.10 type vlan id 10 ip link set dev $swp1.10 master br1 bridge link set dev $swp1.10 locked on check_fail $? "managed to set locked flag on a VLAN upper" ip link set dev $swp1.10 nomaster ip link set dev $swp1 master br1 bridge link set dev $swp1 locked on check_fail $? "managed to set locked flag on a bridge port that has a VLAN upper" ip link del dev $swp1.10 bridge link set dev $swp1 locked on ip link add link $swp1 name $swp1.10 type vlan id 10 check_fail $? "managed to configure a VLAN upper on a locked port" log_test "bridge locked port" ip link del dev $swp1.10 &> /dev/null ip link del dev br1 } devlink_reload_test() { # Test that after executing all the above configuration tests, a # devlink reload can be performed without errors RET=0 devlink dev reload "$DEVLINK_DEV" check_err $? "devlink reload failed" log_test "devlink reload - last test" sleep 20 } trap cleanup EXIT setup_prepare setup_wait tests_run exit $EXIT_STATUS |