Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 | # SPDX-License-Identifier: GPL-2.0-only # Copyright (C) 2020 Renesas Electronics Corp. %YAML 1.2 --- $id: http://devicetree.org/schemas/media/renesas,vin.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Renesas R-Car Video Input (VIN) maintainers: - Niklas Söderlund <niklas.soderlund@ragnatech.se> description: The R-Car Video Input (VIN) device provides video input capabilities for the Renesas R-Car family of devices. Each VIN instance has a single parallel input that supports RGB and YUV video, with both external synchronization and BT.656 synchronization for the latter. Depending on the instance the VIN input is connected to external SoC pins, or on Gen3 and RZ/G2 platforms to a CSI-2 receiver. properties: compatible: oneOf: - items: - enum: - renesas,vin-r8a7742 # RZ/G1H - renesas,vin-r8a7743 # RZ/G1M - renesas,vin-r8a7744 # RZ/G1N - renesas,vin-r8a7745 # RZ/G1E - renesas,vin-r8a77470 # RZ/G1C - renesas,vin-r8a7790 # R-Car H2 - renesas,vin-r8a7791 # R-Car M2-W - renesas,vin-r8a7792 # R-Car V2H - renesas,vin-r8a7793 # R-Car M2-N - renesas,vin-r8a7794 # R-Car E2 - const: renesas,rcar-gen2-vin # Generic R-Car Gen2 or RZ/G1 - items: - enum: - renesas,vin-r8a774a1 # RZ/G2M - renesas,vin-r8a774b1 # RZ/G2N - renesas,vin-r8a774c0 # RZ/G2E - renesas,vin-r8a774e1 # RZ/G2H - renesas,vin-r8a7778 # R-Car M1 - renesas,vin-r8a7779 # R-Car H1 - renesas,vin-r8a7795 # R-Car H3 - renesas,vin-r8a7796 # R-Car M3-W - renesas,vin-r8a77961 # R-Car M3-W+ - renesas,vin-r8a77965 # R-Car M3-N - renesas,vin-r8a77970 # R-Car V3M - renesas,vin-r8a77980 # R-Car V3H - renesas,vin-r8a77990 # R-Car E3 - renesas,vin-r8a77995 # R-Car D3 - renesas,vin-r8a779a0 # R-Car V3U - renesas,vin-r8a779g0 # R-Car V4H reg: maxItems: 1 interrupts: maxItems: 1 clocks: maxItems: 1 power-domains: maxItems: 1 resets: maxItems: 1 # The per-board settings for Gen2 and RZ/G1 platforms: port: $ref: /schemas/graph.yaml#/$defs/port-base unevaluatedProperties: false description: A node containing a parallel input properties: endpoint: $ref: video-interfaces.yaml# unevaluatedProperties: false properties: hsync-active: description: If both HSYNC and VSYNC polarities are not specified, embedded synchronization is selected. default: 1 vsync-active: description: If both HSYNC and VSYNC polarities are not specified, embedded synchronization is selected. default: 1 field-active-even: true bus-width: true data-shift: true data-enable-active: description: Polarity of CLKENB signal default: 1 pclk-sample: true data-active: true # The per-board settings for Gen3 and RZ/G2 platforms: renesas,id: description: VIN channel number $ref: /schemas/types.yaml#/definitions/uint32 minimum: 0 maximum: 31 ports: $ref: /schemas/graph.yaml#/properties/ports properties: port@0: $ref: /schemas/graph.yaml#/$defs/port-base unevaluatedProperties: false description: Input port node, single endpoint describing a parallel input source. properties: endpoint: $ref: video-interfaces.yaml# unevaluatedProperties: false properties: hsync-active: description: If both HSYNC and VSYNC polarities are not specified, embedded synchronization is selected. default: 1 vsync-active: description: If both HSYNC and VSYNC polarities are not specified, embedded synchronization is selected. default: 1 field-active-even: true bus-width: true data-shift: true data-enable-active: description: Polarity of CLKENB signal default: 1 pclk-sample: true data-active: true port@1: $ref: /schemas/graph.yaml#/properties/port description: Input port node, multiple endpoints describing all the R-Car CSI-2 modules connected the VIN. properties: endpoint@0: $ref: /schemas/graph.yaml#/properties/endpoint description: Endpoint connected to CSI20. endpoint@1: $ref: /schemas/graph.yaml#/properties/endpoint description: Endpoint connected to CSI21. endpoint@2: $ref: /schemas/graph.yaml#/properties/endpoint description: Endpoint connected to CSI40. endpoint@3: $ref: /schemas/graph.yaml#/properties/endpoint description: Endpoint connected to CSI41. anyOf: - required: - endpoint@0 - required: - endpoint@1 - required: - endpoint@2 - required: - endpoint@3 port@2: $ref: /schemas/graph.yaml#/properties/port description: Input port node, multiple endpoints describing all the R-Car ISP modules connected the VIN. properties: endpoint@0: $ref: /schemas/graph.yaml#/properties/endpoint description: Endpoint connected to ISP0. endpoint@1: $ref: /schemas/graph.yaml#/properties/endpoint description: Endpoint connected to ISP1. endpoint@2: $ref: /schemas/graph.yaml#/properties/endpoint description: Endpoint connected to ISP2. endpoint@3: $ref: /schemas/graph.yaml#/properties/endpoint description: Endpoint connected to ISP3. required: - compatible - reg - interrupts - clocks - power-domains allOf: - if: not: properties: compatible: contains: enum: - renesas,vin-r8a7778 - renesas,vin-r8a7779 then: required: - resets - if: properties: compatible: contains: enum: - renesas,vin-r8a7778 - renesas,vin-r8a7779 - renesas,rcar-gen2-vin then: required: - port else: required: - renesas,id - ports additionalProperties: false examples: # Device node example for Gen2 platform - | #include <dt-bindings/clock/r8a7790-cpg-mssr.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/power/r8a7790-sysc.h> vin1: vin@e6ef1000 { compatible = "renesas,vin-r8a7790", "renesas,rcar-gen2-vin"; reg = <0xe6ef1000 0x1000>; interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 810>; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; resets = <&cpg 810>; port { vin1ep0: endpoint { remote-endpoint = <&adv7180>; bus-width = <8>; }; }; }; # Device node example for Gen3 platform with only CSI-2 - | #include <dt-bindings/clock/r8a7795-cpg-mssr.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/power/r8a7795-sysc.h> vin0: video@e6ef0000 { compatible = "renesas,vin-r8a7795"; reg = <0xe6ef0000 0x1000>; interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 811>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; resets = <&cpg 811>; renesas,id = <0>; ports { #address-cells = <1>; #size-cells = <0>; port@1 { #address-cells = <1>; #size-cells = <0>; reg = <1>; vin0csi20: endpoint@0 { reg = <0>; remote-endpoint = <&csi20vin0>; }; vin0csi40: endpoint@2 { reg = <2>; remote-endpoint = <&csi40vin0>; }; }; }; }; # Device node example for Gen3 platform with CSI-2 and parallel - | #include <dt-bindings/clock/r8a77970-cpg-mssr.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/power/r8a77970-sysc.h> vin2: video@e6ef2000 { compatible = "renesas,vin-r8a77970"; reg = <0xe6ef2000 0x1000>; interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 809>; power-domains = <&sysc R8A77970_PD_ALWAYS_ON>; resets = <&cpg 809>; renesas,id = <2>; ports { #address-cells = <1>; #size-cells = <0>; port@0 { reg = <0>; vin2_in: endpoint { remote-endpoint = <&adv7612_out>; hsync-active = <0>; vsync-active = <0>; }; }; port@1 { #address-cells = <1>; #size-cells = <0>; reg = <1>; vin2csi40: endpoint@2 { reg = <2>; remote-endpoint = <&csi40vin2>; }; }; }; }; |