Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 | // SPDX-License-Identifier: GPL-2.0 OR X11 /* * Copyright 2016-2019 Toradex AG */ /dts-v1/; #include <dt-bindings/input/input.h> #include "tegra124-apalis.dtsi" / { model = "Toradex Apalis TK1 on Apalis Evaluation Board"; compatible = "toradex,apalis-tk1-eval", "toradex,apalis-tk1", "nvidia,tegra124"; aliases { rtc0 = "/i2c@7000c000/rtc@68"; rtc1 = "/i2c@7000d000/pmic@40"; rtc2 = "/rtc@7000e000"; serial0 = &uarta; serial1 = &uartb; serial2 = &uartc; serial3 = &uartd; }; chosen { stdout-path = "serial0:115200n8"; }; pcie@1003000 { pci@1,0 { status = "okay"; }; }; host1x@50000000 { hdmi@54280000 { status = "okay"; hdmi-supply = <®_5v0>; }; }; gpio: gpio@6000d000 { /* Apalis GPIO7 MXM3 pin 15 PLX PEX 8605 PCIe Switch Reset */ pex-perst-n-hog { gpio-hog; gpios = <TEGRA_GPIO(DD, 1) GPIO_ACTIVE_HIGH>; output-high; line-name = "PEX_PERST_N"; }; }; /* Apalis UART1 */ serial@70006000 { status = "okay"; }; /* Apalis UART2 */ serial@70006040 { status = "okay"; }; /* Apalis UART3 */ serial@70006200 { status = "okay"; }; /* Apalis UART4 */ serial@70006300 { status = "okay"; }; pwm@7000a000 { status = "okay"; }; /* * GEN1_I2C: I2C1_SDA/SCL on MXM3 pin 209/211 (e.g. RTC on carrier * board) */ i2c@7000c000 { status = "okay"; clock-frequency = <400000>; pcie-switch@58 { compatible = "plx,pex8605"; reg = <0x58>; }; /* M41T0M6 real time clock on carrier board */ rtc@68 { compatible = "st,m41t0"; reg = <0x68>; }; }; /* * GEN2_I2C: I2C2_SDA/SCL (DDC) on MXM3 pin 205/207 (e.g. display EDID) */ i2c@7000c400 { status = "okay"; }; /* * CAM_I2C: I2C3_SDA/SCL (CAM) on MXM3 pin 201/203 (e.g. camera sensor * on carrier board) */ i2c@7000c500 { status = "okay"; clock-frequency = <400000>; }; /* I2C4 (DDC): unused */ /* SPI1: Apalis SPI1 */ spi@7000d400 { status = "okay"; spi-max-frequency = <50000000>; }; /* SPI4: Apalis SPI2 */ spi@7000da00 { status = "okay"; spi-max-frequency = <50000000>; }; /* Apalis Serial ATA */ sata@70020000 { status = "okay"; target-5v-supply = <®_5v0>; target-12v-supply = <®_12v0>; }; hda@70030000 { status = "okay"; }; usb@70090000 { status = "okay"; }; /* Apalis MMC1 */ mmc@700b0000 { status = "okay"; bus-width = <4>; /* MMC1_CD# */ cd-gpios = <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_LOW>; vqmmc-supply = <&vddio_sdmmc1>; }; /* Apalis SD1 */ mmc@700b0400 { status = "okay"; bus-width = <4>; /* SD1_CD# */ cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>; vqmmc-supply = <&vddio_sdmmc3>; }; /* EHCI instance 0: USB1_DP/N -> USBO1_DP/N */ usb@7d000000 { status = "okay"; dr_mode = "otg"; }; usb-phy@7d000000 { status = "okay"; vbus-supply = <®_usbo1_vbus>; }; /* EHCI instance 1: USB2_DP/N -> USBH2_DP/N */ usb@7d004000 { status = "okay"; }; usb-phy@7d004000 { status = "okay"; vbus-supply = <®_usbh_vbus>; }; /* EHCI instance 2: USB3_DP/N -> USBH4_DP/N */ usb@7d008000 { status = "okay"; }; usb-phy@7d008000 { status = "okay"; vbus-supply = <®_usbh_vbus>; }; backlight: backlight { compatible = "pwm-backlight"; brightness-levels = <255 231 223 207 191 159 127 0>; default-brightness-level = <6>; /* BKL1_ON */ enable-gpios = <&gpio TEGRA_GPIO(BB, 5) GPIO_ACTIVE_HIGH>; power-supply = <®_3v3>; pwms = <&pwm 3 5000000>; /* BKL1_PWM */ }; gpio-keys { compatible = "gpio-keys"; key-wakeup { label = "WAKE1_MICO"; gpios = <&gpio TEGRA_GPIO(DD, 3) GPIO_ACTIVE_LOW>; linux,code = <KEY_WAKEUP>; debounce-interval = <10>; wakeup-source; }; }; reg_3v3: regulator-3v3 { compatible = "regulator-fixed"; regulator-name = "3.3V_SW"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; reg_5v0: regulator-5v0 { compatible = "regulator-fixed"; regulator-name = "5V_SW"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; }; reg_12v0: regulator-12v0 { compatible = "regulator-fixed"; regulator-name = "12V_SW"; regulator-min-microvolt = <12000000>; regulator-max-microvolt = <12000000>; }; /* USBO1_EN */ reg_usbo1_vbus: regulator-usbo1-vbus { compatible = "regulator-fixed"; regulator-name = "VCC_USBO1"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; gpio = <&gpio TEGRA_GPIO(N, 4) GPIO_ACTIVE_HIGH>; enable-active-high; vin-supply = <®_5v0>; }; /* USBH_EN */ reg_usbh_vbus: regulator-usbh-vbus { compatible = "regulator-fixed"; regulator-name = "VCC_USBH(2A|2C|2D|3|4)"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; gpio = <&gpio TEGRA_GPIO(N, 5) GPIO_ACTIVE_HIGH>; enable-active-high; vin-supply = <®_5v0>; }; }; |