// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Applied Micro X-Gene SoC Ethernet v2 Driver
*
* Copyright (c) 2017, Applied Micro Circuits Corporation
* Author(s): Iyappan Subramanian <isubramanian@apm.com>
* Keyur Chudgar <kchudgar@apm.com>
*/
#include "main.h"
static int xge_mdio_write(struct mii_bus *bus, int phy_id, int reg, u16 data)
{
struct xge_pdata *pdata = bus->priv;
u32 done, val = 0;
u8 wait = 10;
SET_REG_BITS(&val, PHY_ADDR, phy_id);
SET_REG_BITS(&val, REG_ADDR, reg);
xge_wr_csr(pdata, MII_MGMT_ADDRESS, val);
xge_wr_csr(pdata, MII_MGMT_CONTROL, data);
do {
usleep_range(5, 10);
done = xge_rd_csr(pdata, MII_MGMT_INDICATORS);
} while ((done & MII_MGMT_BUSY) && wait--);
if (done & MII_MGMT_BUSY) {
dev_err(&bus->dev, "MII_MGMT write failed\n");
return -ETIMEDOUT;
}
return 0;
}
static int xge_mdio_read(struct mii_bus *bus, int phy_id, int reg)
{
struct xge_pdata *pdata = bus->priv;
u32 data, done, val = 0;
u8 wait = 10;
SET_REG_BITS(&val, PHY_ADDR, phy_id);
SET_REG_BITS(&val, REG_ADDR, reg);
xge_wr_csr(pdata, MII_MGMT_ADDRESS, val);
xge_wr_csr(pdata, MII_MGMT_COMMAND, MII_READ_CYCLE);
do {
usleep_range(5, 10);
done = xge_rd_csr(pdata, MII_MGMT_INDICATORS);
} while ((done & MII_MGMT_BUSY) && wait--);
if (done & MII_MGMT_BUSY) {
dev_err(&bus->dev, "MII_MGMT read failed\n");
return -ETIMEDOUT;
}
data = xge_rd_csr(pdata, MII_MGMT_STATUS);
xge_wr_csr(pdata, MII_MGMT_COMMAND, 0);
return data;
}
static void xge_adjust_link(struct net_device *ndev)
{
struct xge_pdata *pdata = netdev_priv(ndev);
struct phy_device *phydev = ndev->phydev;
if (phydev->link) {
if (pdata->phy_speed != phydev->speed) {
pdata->phy_speed = phydev->speed;
xge_mac_set_speed(pdata);
xge_mac_enable(pdata);
phy_print_status(phydev);
}
} else {
if (pdata->phy_speed != SPEED_UNKNOWN) {
pdata->phy_speed = SPEED_UNKNOWN;
xge_mac_disable(pdata);
phy_print_status(phydev);
}
}
}
void xge_mdio_remove(struct net_device *ndev)
{
struct xge_pdata *pdata = netdev_priv(ndev);
struct mii_bus *mdio_bus = pdata->mdio_bus;
if (ndev->phydev)
phy_disconnect(ndev->phydev);
if (mdio_bus->state == MDIOBUS_REGISTERED)
mdiobus_unregister(mdio_bus);
mdiobus_free(mdio_bus);
}
int xge_mdio_config(struct net_device *ndev)
{
__ETHTOOL_DECLARE_LINK_MODE_MASK(mask) = { 0, };
struct xge_pdata *pdata = netdev_priv(ndev);
struct device *dev = &pdata->pdev->dev;
struct mii_bus *mdio_bus;
struct phy_device *phydev;
int ret;
mdio_bus = mdiobus_alloc();
if (!mdio_bus)
return -ENOMEM;
mdio_bus->name = "APM X-Gene Ethernet (v2) MDIO Bus";
mdio_bus->read = xge_mdio_read;
mdio_bus->write = xge_mdio_write;
mdio_bus->priv = pdata;
mdio_bus->parent = dev;
snprintf(mdio_bus->id, MII_BUS_ID_SIZE, "%s-mii", dev_name(dev));
pdata->mdio_bus = mdio_bus;
mdio_bus->phy_mask = 0x1;
ret = mdiobus_register(mdio_bus);
if (ret)
goto err;
phydev = phy_find_first(mdio_bus);
if (!phydev) {
dev_err(dev, "no PHY found\n");
ret = -ENODEV;
goto err;
}
phydev = phy_connect(ndev, phydev_name(phydev),
&xge_adjust_link,
pdata->resources.phy_mode);
if (IS_ERR(phydev)) {
netdev_err(ndev, "Could not attach to PHY\n");
ret = PTR_ERR(phydev);
goto err;
}
linkmode_set_bit_array(phy_10_100_features_array,
ARRAY_SIZE(phy_10_100_features_array),
mask);
linkmode_set_bit(ETHTOOL_LINK_MODE_1000baseT_Half_BIT, mask);
linkmode_set_bit(ETHTOOL_LINK_MODE_AUI_BIT, mask);
linkmode_set_bit(ETHTOOL_LINK_MODE_MII_BIT, mask);
linkmode_set_bit(ETHTOOL_LINK_MODE_FIBRE_BIT, mask);
linkmode_set_bit(ETHTOOL_LINK_MODE_BNC_BIT, mask);
linkmode_andnot(phydev->supported, phydev->supported, mask);
linkmode_copy(phydev->advertising, phydev->supported);
pdata->phy_speed = SPEED_UNKNOWN;
return 0;
err:
xge_mdio_remove(ndev);
return ret;
}