Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 593 594 595 596 597 598 599 600 601 602 603 604 605 606 607 608 609 610 611 612 613 614 615 616 617 618 619 620 621 622 623 624 625 626 627 628 629 630 631 632 633 634 635 636 637 638 639 640 641 642 643 644 645 646 647 648 649 650 651 652 653 654 655 656 657 658 659 660 661 662 663 664 665 666 667 668 669 670 671 672 673 674 675 676 677 678 679 680 681 682 683 684 685 686 687 688 689 690 691 692 693 694 695 696 697 698 699 700 701 702 703 704 705 706 707 708 709 710 711 712 713 714 715 716 717 718 719 720 721 722 723 724 725 726 727 728 729 730 731 732 | #!/bin/bash # SPDX-License-Identifier: GPL-2.0 # End-to-end eBPF tunnel test suite # The script tests BPF network tunnel implementation. # # Topology: # --------- # root namespace | at_ns0 namespace # | # ----------- | ----------- # | tnl dev | | | tnl dev | (overlay network) # ----------- | ----------- # metadata-mode | native-mode # with bpf | # | # ---------- | ---------- # | veth1 | --------- | veth0 | (underlay network) # ---------- peer ---------- # # # Device Configuration # -------------------- # Root namespace with metadata-mode tunnel + BPF # Device names and addresses: # veth1 IP: 172.16.1.200, IPv6: 00::22 (underlay) # tunnel dev <type>11, ex: gre11, IPv4: 10.1.1.200, IPv6: 1::22 (overlay) # # Namespace at_ns0 with native tunnel # Device names and addresses: # veth0 IPv4: 172.16.1.100, IPv6: 00::11 (underlay) # tunnel dev <type>00, ex: gre00, IPv4: 10.1.1.100, IPv6: 1::11 (overlay) # # # End-to-end ping packet flow # --------------------------- # Most of the tests start by namespace creation, device configuration, # then ping the underlay and overlay network. When doing 'ping 10.1.1.100' # from root namespace, the following operations happen: # 1) Route lookup shows 10.1.1.100/24 belongs to tnl dev, fwd to tnl dev. # 2) Tnl device's egress BPF program is triggered and set the tunnel metadata, # with remote_ip=172.16.1.100 and others. # 3) Outer tunnel header is prepended and route the packet to veth1's egress # 4) veth0's ingress queue receive the tunneled packet at namespace at_ns0 # 5) Tunnel protocol handler, ex: vxlan_rcv, decap the packet # 6) Forward the packet to the overlay tnl dev BPF_FILE="test_tunnel_kern.bpf.o" BPF_PIN_TUNNEL_DIR="/sys/fs/bpf/tc/tunnel" PING_ARG="-c 3 -w 10 -q" ret=0 GREEN='\033[0;92m' RED='\033[0;31m' NC='\033[0m' # No Color config_device() { ip netns add at_ns0 ip link add veth0 type veth peer name veth1 ip link set veth0 netns at_ns0 ip netns exec at_ns0 ip addr add 172.16.1.100/24 dev veth0 ip netns exec at_ns0 ip link set dev veth0 up ip link set dev veth1 up mtu 1500 ip addr add dev veth1 172.16.1.200/24 } add_gre_tunnel() { tun_key= if [ -n "$1" ]; then tun_key="key $1" fi # at_ns0 namespace ip netns exec at_ns0 \ ip link add dev $DEV_NS type $TYPE seq $tun_key \ local 172.16.1.100 remote 172.16.1.200 ip netns exec at_ns0 ip link set dev $DEV_NS up ip netns exec at_ns0 ip addr add dev $DEV_NS 10.1.1.100/24 # root namespace ip link add dev $DEV type $TYPE $tun_key external ip link set dev $DEV up ip addr add dev $DEV 10.1.1.200/24 } add_ip6gretap_tunnel() { # assign ipv6 address ip netns exec at_ns0 ip addr add ::11/96 dev veth0 ip netns exec at_ns0 ip link set dev veth0 up ip addr add dev veth1 ::22/96 ip link set dev veth1 up # at_ns0 namespace ip netns exec at_ns0 \ ip link add dev $DEV_NS type $TYPE seq flowlabel 0xbcdef key 2 \ local ::11 remote ::22 ip netns exec at_ns0 ip addr add dev $DEV_NS 10.1.1.100/24 ip netns exec at_ns0 ip addr add dev $DEV_NS fc80::100/96 ip netns exec at_ns0 ip link set dev $DEV_NS up # root namespace ip link add dev $DEV type $TYPE external ip addr add dev $DEV 10.1.1.200/24 ip addr add dev $DEV fc80::200/24 ip link set dev $DEV up } add_erspan_tunnel() { # at_ns0 namespace if [ "$1" == "v1" ]; then ip netns exec at_ns0 \ ip link add dev $DEV_NS type $TYPE seq key 2 \ local 172.16.1.100 remote 172.16.1.200 \ erspan_ver 1 erspan 123 else ip netns exec at_ns0 \ ip link add dev $DEV_NS type $TYPE seq key 2 \ local 172.16.1.100 remote 172.16.1.200 \ erspan_ver 2 erspan_dir egress erspan_hwid 3 fi ip netns exec at_ns0 ip link set dev $DEV_NS up ip netns exec at_ns0 ip addr add dev $DEV_NS 10.1.1.100/24 # root namespace ip link add dev $DEV type $TYPE external ip link set dev $DEV up ip addr add dev $DEV 10.1.1.200/24 } add_ip6erspan_tunnel() { # assign ipv6 address ip netns exec at_ns0 ip addr add ::11/96 dev veth0 ip netns exec at_ns0 ip link set dev veth0 up ip addr add dev veth1 ::22/96 ip link set dev veth1 up # at_ns0 namespace if [ "$1" == "v1" ]; then ip netns exec at_ns0 \ ip link add dev $DEV_NS type $TYPE seq key 2 \ local ::11 remote ::22 \ erspan_ver 1 erspan 123 else ip netns exec at_ns0 \ ip link add dev $DEV_NS type $TYPE seq key 2 \ local ::11 remote ::22 \ erspan_ver 2 erspan_dir egress erspan_hwid 7 fi ip netns exec at_ns0 ip addr add dev $DEV_NS 10.1.1.100/24 ip netns exec at_ns0 ip link set dev $DEV_NS up # root namespace ip link add dev $DEV type $TYPE external ip addr add dev $DEV 10.1.1.200/24 ip link set dev $DEV up } add_geneve_tunnel() { # at_ns0 namespace ip netns exec at_ns0 \ ip link add dev $DEV_NS type $TYPE \ id 2 dstport 6081 remote 172.16.1.200 ip netns exec at_ns0 ip link set dev $DEV_NS up ip netns exec at_ns0 ip addr add dev $DEV_NS 10.1.1.100/24 # root namespace ip link add dev $DEV type $TYPE dstport 6081 external ip link set dev $DEV up ip addr add dev $DEV 10.1.1.200/24 } add_ip6geneve_tunnel() { ip netns exec at_ns0 ip addr add ::11/96 dev veth0 ip netns exec at_ns0 ip link set dev veth0 up ip addr add dev veth1 ::22/96 ip link set dev veth1 up # at_ns0 namespace ip netns exec at_ns0 \ ip link add dev $DEV_NS type $TYPE id 22 \ remote ::22 # geneve has no local option ip netns exec at_ns0 ip addr add dev $DEV_NS 10.1.1.100/24 ip netns exec at_ns0 ip link set dev $DEV_NS up # root namespace ip link add dev $DEV type $TYPE external ip addr add dev $DEV 10.1.1.200/24 ip link set dev $DEV up } add_ipip_tunnel() { # at_ns0 namespace ip netns exec at_ns0 \ ip link add dev $DEV_NS type $TYPE \ local 172.16.1.100 remote 172.16.1.200 ip netns exec at_ns0 ip link set dev $DEV_NS up ip netns exec at_ns0 ip addr add dev $DEV_NS 10.1.1.100/24 # root namespace ip link add dev $DEV type $TYPE external ip link set dev $DEV up ip addr add dev $DEV 10.1.1.200/24 } add_ip6tnl_tunnel() { ip netns exec at_ns0 ip addr add ::11/96 dev veth0 ip netns exec at_ns0 ip link set dev veth0 up ip addr add dev veth1 ::22/96 ip link set dev veth1 up # at_ns0 namespace ip netns exec at_ns0 \ ip link add dev $DEV_NS type $TYPE \ local ::11 remote ::22 ip netns exec at_ns0 ip addr add dev $DEV_NS 10.1.1.100/24 ip netns exec at_ns0 ip addr add dev $DEV_NS 1::11/96 ip netns exec at_ns0 ip link set dev $DEV_NS up # root namespace ip link add dev $DEV type $TYPE external ip addr add dev $DEV 10.1.1.200/24 ip addr add dev $DEV 1::22/96 ip link set dev $DEV up } test_gre() { TYPE=gretap DEV_NS=gretap00 DEV=gretap11 ret=0 check $TYPE config_device add_gre_tunnel 2 attach_bpf $DEV gre_set_tunnel gre_get_tunnel ping $PING_ARG 10.1.1.100 check_err $? ip netns exec at_ns0 ping $PING_ARG 10.1.1.200 check_err $? cleanup if [ $ret -ne 0 ]; then echo -e ${RED}"FAIL: $TYPE"${NC} return 1 fi echo -e ${GREEN}"PASS: $TYPE"${NC} } test_gre_no_tunnel_key() { TYPE=gre DEV_NS=gre00 DEV=gre11 ret=0 check $TYPE config_device add_gre_tunnel attach_bpf $DEV gre_set_tunnel_no_key gre_get_tunnel ping $PING_ARG 10.1.1.100 check_err $? ip netns exec at_ns0 ping $PING_ARG 10.1.1.200 check_err $? cleanup if [ $ret -ne 0 ]; then echo -e ${RED}"FAIL: $TYPE"${NC} return 1 fi echo -e ${GREEN}"PASS: $TYPE"${NC} } test_ip6gre() { TYPE=ip6gre DEV_NS=ip6gre00 DEV=ip6gre11 ret=0 check $TYPE config_device # reuse the ip6gretap function add_ip6gretap_tunnel attach_bpf $DEV ip6gretap_set_tunnel ip6gretap_get_tunnel # underlay ping6 $PING_ARG ::11 # overlay: ipv4 over ipv6 ip netns exec at_ns0 ping $PING_ARG 10.1.1.200 ping $PING_ARG 10.1.1.100 check_err $? # overlay: ipv6 over ipv6 ip netns exec at_ns0 ping6 $PING_ARG fc80::200 check_err $? cleanup if [ $ret -ne 0 ]; then echo -e ${RED}"FAIL: $TYPE"${NC} return 1 fi echo -e ${GREEN}"PASS: $TYPE"${NC} } test_ip6gretap() { TYPE=ip6gretap DEV_NS=ip6gretap00 DEV=ip6gretap11 ret=0 check $TYPE config_device add_ip6gretap_tunnel attach_bpf $DEV ip6gretap_set_tunnel ip6gretap_get_tunnel # underlay ping6 $PING_ARG ::11 # overlay: ipv4 over ipv6 ip netns exec at_ns0 ping $PING_ARG 10.1.1.200 ping $PING_ARG 10.1.1.100 check_err $? # overlay: ipv6 over ipv6 ip netns exec at_ns0 ping6 $PING_ARG fc80::200 check_err $? cleanup if [ $ret -ne 0 ]; then echo -e ${RED}"FAIL: $TYPE"${NC} return 1 fi echo -e ${GREEN}"PASS: $TYPE"${NC} } test_erspan() { TYPE=erspan DEV_NS=erspan00 DEV=erspan11 ret=0 check $TYPE config_device add_erspan_tunnel $1 attach_bpf $DEV erspan_set_tunnel erspan_get_tunnel ping $PING_ARG 10.1.1.100 check_err $? ip netns exec at_ns0 ping $PING_ARG 10.1.1.200 check_err $? cleanup if [ $ret -ne 0 ]; then echo -e ${RED}"FAIL: $TYPE"${NC} return 1 fi echo -e ${GREEN}"PASS: $TYPE"${NC} } test_ip6erspan() { TYPE=ip6erspan DEV_NS=ip6erspan00 DEV=ip6erspan11 ret=0 check $TYPE config_device add_ip6erspan_tunnel $1 attach_bpf $DEV ip4ip6erspan_set_tunnel ip4ip6erspan_get_tunnel ping6 $PING_ARG ::11 ip netns exec at_ns0 ping $PING_ARG 10.1.1.200 check_err $? cleanup if [ $ret -ne 0 ]; then echo -e ${RED}"FAIL: $TYPE"${NC} return 1 fi echo -e ${GREEN}"PASS: $TYPE"${NC} } test_geneve() { TYPE=geneve DEV_NS=geneve00 DEV=geneve11 ret=0 check $TYPE config_device add_geneve_tunnel attach_bpf $DEV geneve_set_tunnel geneve_get_tunnel ping $PING_ARG 10.1.1.100 check_err $? ip netns exec at_ns0 ping $PING_ARG 10.1.1.200 check_err $? cleanup if [ $ret -ne 0 ]; then echo -e ${RED}"FAIL: $TYPE"${NC} return 1 fi echo -e ${GREEN}"PASS: $TYPE"${NC} } test_ip6geneve() { TYPE=geneve DEV_NS=ip6geneve00 DEV=ip6geneve11 ret=0 check $TYPE config_device add_ip6geneve_tunnel attach_bpf $DEV ip6geneve_set_tunnel ip6geneve_get_tunnel ping $PING_ARG 10.1.1.100 check_err $? ip netns exec at_ns0 ping $PING_ARG 10.1.1.200 check_err $? cleanup if [ $ret -ne 0 ]; then echo -e ${RED}"FAIL: ip6$TYPE"${NC} return 1 fi echo -e ${GREEN}"PASS: ip6$TYPE"${NC} } test_ipip() { TYPE=ipip DEV_NS=ipip00 DEV=ipip11 ret=0 check $TYPE config_device add_ipip_tunnel ip link set dev veth1 mtu 1500 attach_bpf $DEV ipip_set_tunnel ipip_get_tunnel ping $PING_ARG 10.1.1.100 check_err $? ip netns exec at_ns0 ping $PING_ARG 10.1.1.200 check_err $? cleanup if [ $ret -ne 0 ]; then echo -e ${RED}"FAIL: $TYPE"${NC} return 1 fi echo -e ${GREEN}"PASS: $TYPE"${NC} } test_ipip6() { TYPE=ip6tnl DEV_NS=ipip6tnl00 DEV=ipip6tnl11 ret=0 check $TYPE config_device add_ip6tnl_tunnel ip link set dev veth1 mtu 1500 attach_bpf $DEV ipip6_set_tunnel ipip6_get_tunnel # underlay ping6 $PING_ARG ::11 # ip4 over ip6 ping $PING_ARG 10.1.1.100 check_err $? ip netns exec at_ns0 ping $PING_ARG 10.1.1.200 check_err $? cleanup if [ $ret -ne 0 ]; then echo -e ${RED}"FAIL: $TYPE"${NC} return 1 fi echo -e ${GREEN}"PASS: $TYPE"${NC} } test_ip6ip6() { TYPE=ip6tnl DEV_NS=ip6ip6tnl00 DEV=ip6ip6tnl11 ret=0 check $TYPE config_device add_ip6tnl_tunnel ip link set dev veth1 mtu 1500 attach_bpf $DEV ip6ip6_set_tunnel ip6ip6_get_tunnel # underlay ping6 $PING_ARG ::11 # ip6 over ip6 ping6 $PING_ARG 1::11 check_err $? ip netns exec at_ns0 ping6 $PING_ARG 1::22 check_err $? cleanup if [ $ret -ne 0 ]; then echo -e ${RED}"FAIL: ip6$TYPE"${NC} return 1 fi echo -e ${GREEN}"PASS: ip6$TYPE"${NC} } setup_xfrm_tunnel() { auth=0x$(printf '1%.0s' {1..40}) enc=0x$(printf '2%.0s' {1..32}) spi_in_to_out=0x1 spi_out_to_in=0x2 # at_ns0 namespace # at_ns0 -> root ip netns exec at_ns0 \ ip xfrm state add src 172.16.1.100 dst 172.16.1.200 proto esp \ spi $spi_in_to_out reqid 1 mode tunnel \ auth-trunc 'hmac(sha1)' $auth 96 enc 'cbc(aes)' $enc ip netns exec at_ns0 \ ip xfrm policy add src 10.1.1.100/32 dst 10.1.1.200/32 dir out \ tmpl src 172.16.1.100 dst 172.16.1.200 proto esp reqid 1 \ mode tunnel # root -> at_ns0 ip netns exec at_ns0 \ ip xfrm state add src 172.16.1.200 dst 172.16.1.100 proto esp \ spi $spi_out_to_in reqid 2 mode tunnel \ auth-trunc 'hmac(sha1)' $auth 96 enc 'cbc(aes)' $enc ip netns exec at_ns0 \ ip xfrm policy add src 10.1.1.200/32 dst 10.1.1.100/32 dir in \ tmpl src 172.16.1.200 dst 172.16.1.100 proto esp reqid 2 \ mode tunnel # address & route ip netns exec at_ns0 \ ip addr add dev veth0 10.1.1.100/32 ip netns exec at_ns0 \ ip route add 10.1.1.200 dev veth0 via 172.16.1.200 \ src 10.1.1.100 # root namespace # at_ns0 -> root ip xfrm state add src 172.16.1.100 dst 172.16.1.200 proto esp \ spi $spi_in_to_out reqid 1 mode tunnel \ auth-trunc 'hmac(sha1)' $auth 96 enc 'cbc(aes)' $enc ip xfrm policy add src 10.1.1.100/32 dst 10.1.1.200/32 dir in \ tmpl src 172.16.1.100 dst 172.16.1.200 proto esp reqid 1 \ mode tunnel # root -> at_ns0 ip xfrm state add src 172.16.1.200 dst 172.16.1.100 proto esp \ spi $spi_out_to_in reqid 2 mode tunnel \ auth-trunc 'hmac(sha1)' $auth 96 enc 'cbc(aes)' $enc ip xfrm policy add src 10.1.1.200/32 dst 10.1.1.100/32 dir out \ tmpl src 172.16.1.200 dst 172.16.1.100 proto esp reqid 2 \ mode tunnel # address & route ip addr add dev veth1 10.1.1.200/32 ip route add 10.1.1.100 dev veth1 via 172.16.1.100 src 10.1.1.200 } test_xfrm_tunnel() { config_device > /sys/kernel/debug/tracing/trace setup_xfrm_tunnel mkdir -p ${BPF_PIN_TUNNEL_DIR} bpftool prog loadall ${BPF_FILE} ${BPF_PIN_TUNNEL_DIR} tc qdisc add dev veth1 clsact tc filter add dev veth1 proto ip ingress bpf da object-pinned \ ${BPF_PIN_TUNNEL_DIR}/xfrm_get_state ip netns exec at_ns0 ping $PING_ARG 10.1.1.200 sleep 1 grep "reqid 1" /sys/kernel/debug/tracing/trace check_err $? grep "spi 0x1" /sys/kernel/debug/tracing/trace check_err $? grep "remote ip 0xac100164" /sys/kernel/debug/tracing/trace check_err $? cleanup if [ $ret -ne 0 ]; then echo -e ${RED}"FAIL: xfrm tunnel"${NC} return 1 fi echo -e ${GREEN}"PASS: xfrm tunnel"${NC} } attach_bpf() { DEV=$1 SET=$2 GET=$3 mkdir -p ${BPF_PIN_TUNNEL_DIR} bpftool prog loadall ${BPF_FILE} ${BPF_PIN_TUNNEL_DIR}/ tc qdisc add dev $DEV clsact tc filter add dev $DEV egress bpf da object-pinned ${BPF_PIN_TUNNEL_DIR}/$SET tc filter add dev $DEV ingress bpf da object-pinned ${BPF_PIN_TUNNEL_DIR}/$GET } cleanup() { rm -rf ${BPF_PIN_TUNNEL_DIR} ip netns delete at_ns0 2> /dev/null ip link del veth1 2> /dev/null ip link del ipip11 2> /dev/null ip link del ipip6tnl11 2> /dev/null ip link del ip6ip6tnl11 2> /dev/null ip link del gretap11 2> /dev/null ip link del gre11 2> /dev/null ip link del ip6gre11 2> /dev/null ip link del ip6gretap11 2> /dev/null ip link del geneve11 2> /dev/null ip link del ip6geneve11 2> /dev/null ip link del erspan11 2> /dev/null ip link del ip6erspan11 2> /dev/null ip xfrm policy delete dir out src 10.1.1.200/32 dst 10.1.1.100/32 2> /dev/null ip xfrm policy delete dir in src 10.1.1.100/32 dst 10.1.1.200/32 2> /dev/null ip xfrm state delete src 172.16.1.100 dst 172.16.1.200 proto esp spi 0x1 2> /dev/null ip xfrm state delete src 172.16.1.200 dst 172.16.1.100 proto esp spi 0x2 2> /dev/null } cleanup_exit() { echo "CATCH SIGKILL or SIGINT, cleanup and exit" cleanup exit 0 } check() { ip link help 2>&1 | grep -q "\s$1\s" if [ $? -ne 0 ];then echo "SKIP $1: iproute2 not support" cleanup return 1 fi } enable_debug() { echo 'file ip_gre.c +p' > /sys/kernel/debug/dynamic_debug/control echo 'file ip6_gre.c +p' > /sys/kernel/debug/dynamic_debug/control echo 'file geneve.c +p' > /sys/kernel/debug/dynamic_debug/control echo 'file ipip.c +p' > /sys/kernel/debug/dynamic_debug/control } check_err() { if [ $ret -eq 0 ]; then ret=$1 fi } bpf_tunnel_test() { local errors=0 echo "Testing GRE tunnel..." test_gre errors=$(( $errors + $? )) echo "Testing GRE tunnel (without tunnel keys)..." test_gre_no_tunnel_key errors=$(( $errors + $? )) echo "Testing IP6GRE tunnel..." test_ip6gre errors=$(( $errors + $? )) echo "Testing IP6GRETAP tunnel..." test_ip6gretap errors=$(( $errors + $? )) echo "Testing ERSPAN tunnel..." test_erspan v2 errors=$(( $errors + $? )) echo "Testing IP6ERSPAN tunnel..." test_ip6erspan v2 errors=$(( $errors + $? )) echo "Testing GENEVE tunnel..." test_geneve errors=$(( $errors + $? )) echo "Testing IP6GENEVE tunnel..." test_ip6geneve errors=$(( $errors + $? )) echo "Testing IPIP tunnel..." test_ipip errors=$(( $errors + $? )) echo "Testing IPIP6 tunnel..." test_ipip6 errors=$(( $errors + $? )) echo "Testing IP6IP6 tunnel..." test_ip6ip6 errors=$(( $errors + $? )) echo "Testing IPSec tunnel..." test_xfrm_tunnel errors=$(( $errors + $? )) return $errors } trap cleanup 0 3 6 trap cleanup_exit 2 9 cleanup bpf_tunnel_test if [ $? -ne 0 ]; then echo -e "$(basename $0): ${RED}FAIL${NC}" exit 1 fi echo -e "$(basename $0): ${GREEN}PASS${NC}" exit 0 |