Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 | // SPDX-License-Identifier: GPL-2.0+ OR MIT /* * Device Tree Source for Qualcomm MDM9615 SoC * * Copyright (C) 2016 BayLibre, SAS. * Author : Neil Armstrong <narmstrong@baylibre.com> */ /dts-v1/; #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/qcom,gcc-mdm9615.h> #include <dt-bindings/reset/qcom,gcc-mdm9615.h> #include <dt-bindings/mfd/qcom-rpm.h> #include <dt-bindings/soc/qcom,gsbi.h> / { #address-cells = <1>; #size-cells = <1>; model = "Qualcomm MDM9615"; compatible = "qcom,mdm9615"; interrupt-parent = <&intc>; cpus { #address-cells = <1>; #size-cells = <0>; cpu0: cpu@0 { compatible = "arm,cortex-a5"; reg = <0>; device_type = "cpu"; next-level-cache = <&L2>; }; }; cpu-pmu { compatible = "arm,cortex-a5-pmu"; interrupts = <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH)>; }; clocks { cxo_board { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <19200000>; }; }; regulators { vsdcc_fixed: vsdcc-regulator { compatible = "regulator-fixed"; regulator-name = "SDCC Power"; regulator-min-microvolt = <2700000>; regulator-max-microvolt = <2700000>; regulator-always-on; }; }; soc: soc { #address-cells = <1>; #size-cells = <1>; ranges; compatible = "simple-bus"; L2: cache-controller@2040000 { compatible = "arm,pl310-cache"; reg = <0x02040000 0x1000>; arm,data-latency = <2 2 0>; cache-unified; cache-level = <2>; }; intc: interrupt-controller@2000000 { compatible = "qcom,msm-qgic2"; interrupt-controller; #interrupt-cells = <3>; reg = <0x02000000 0x1000>, <0x02002000 0x1000>; }; timer@200a000 { compatible = "qcom,kpss-wdt-mdm9615", "qcom,kpss-timer", "qcom,msm-timer"; interrupts = <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_EDGE_RISING)>, <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_EDGE_RISING)>, <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_EDGE_RISING)>; reg = <0x0200a000 0x100>; clock-frequency = <27000000>; cpu-offset = <0x80000>; }; msmgpio: pinctrl@800000 { compatible = "qcom,mdm9615-pinctrl"; gpio-controller; gpio-ranges = <&msmgpio 0 0 88>; #gpio-cells = <2>; interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; interrupt-controller; #interrupt-cells = <2>; reg = <0x800000 0x4000>; }; gcc: clock-controller@900000 { compatible = "qcom,gcc-mdm9615"; #clock-cells = <1>; #power-domain-cells = <1>; #reset-cells = <1>; reg = <0x900000 0x4000>; }; lcc: clock-controller@28000000 { compatible = "qcom,lcc-mdm9615"; reg = <0x28000000 0x1000>; #clock-cells = <1>; #reset-cells = <1>; }; l2cc: clock-controller@2011000 { compatible = "qcom,kpss-gcc", "syscon"; reg = <0x02011000 0x1000>; }; rng@1a500000 { compatible = "qcom,prng"; reg = <0x1a500000 0x200>; clocks = <&gcc PRNG_CLK>; clock-names = "core"; assigned-clocks = <&gcc PRNG_CLK>; assigned-clock-rates = <32000000>; }; gsbi2: gsbi@16100000 { compatible = "qcom,gsbi-v1.0.0"; cell-index = <2>; reg = <0x16100000 0x100>; clocks = <&gcc GSBI2_H_CLK>; clock-names = "iface"; status = "disabled"; #address-cells = <1>; #size-cells = <1>; ranges; gsbi2_i2c: i2c@16180000 { compatible = "qcom,i2c-qup-v1.1.1"; #address-cells = <1>; #size-cells = <0>; reg = <0x16180000 0x1000>; interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GSBI2_QUP_CLK>, <&gcc GSBI2_H_CLK>; clock-names = "core", "iface"; status = "disabled"; }; }; gsbi3: gsbi@16200000 { compatible = "qcom,gsbi-v1.0.0"; cell-index = <3>; reg = <0x16200000 0x100>; clocks = <&gcc GSBI3_H_CLK>; clock-names = "iface"; status = "disabled"; #address-cells = <1>; #size-cells = <1>; ranges; gsbi3_spi: spi@16280000 { compatible = "qcom,spi-qup-v1.1.1"; #address-cells = <1>; #size-cells = <0>; reg = <0x16280000 0x1000>; interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GSBI3_QUP_CLK>, <&gcc GSBI3_H_CLK>; clock-names = "core", "iface"; status = "disabled"; }; }; gsbi4: gsbi@16300000 { compatible = "qcom,gsbi-v1.0.0"; cell-index = <4>; reg = <0x16300000 0x100>; clocks = <&gcc GSBI4_H_CLK>; clock-names = "iface"; status = "disabled"; #address-cells = <1>; #size-cells = <1>; ranges; syscon-tcsr = <&tcsr>; gsbi4_serial: serial@16340000 { compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; reg = <0x16340000 0x1000>, <0x16300000 0x1000>; interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GSBI4_UART_CLK>, <&gcc GSBI4_H_CLK>; clock-names = "core", "iface"; status = "disabled"; }; }; gsbi5: gsbi@16400000 { compatible = "qcom,gsbi-v1.0.0"; cell-index = <5>; reg = <0x16400000 0x100>; clocks = <&gcc GSBI5_H_CLK>; clock-names = "iface"; status = "disabled"; #address-cells = <1>; #size-cells = <1>; ranges; syscon-tcsr = <&tcsr>; gsbi5_i2c: i2c@16480000 { compatible = "qcom,i2c-qup-v1.1.1"; #address-cells = <1>; #size-cells = <0>; reg = <0x16480000 0x1000>; interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; /* QUP clock is not initialized, set rate */ assigned-clocks = <&gcc GSBI5_QUP_CLK>; assigned-clock-rates = <24000000>; clocks = <&gcc GSBI5_QUP_CLK>, <&gcc GSBI5_H_CLK>; clock-names = "core", "iface"; status = "disabled"; }; gsbi5_serial: serial@16440000 { compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; reg = <0x16440000 0x1000>, <0x16400000 0x1000>; interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>; clock-names = "core", "iface"; status = "disabled"; }; }; qcom,ssbi@500000 { compatible = "qcom,ssbi"; reg = <0x500000 0x1000>; qcom,controller-type = "pmic-arbiter"; pmicintc: pmic { compatible = "qcom,pm8018", "qcom,pm8921"; interrupts = <GIC_PPI 226 IRQ_TYPE_LEVEL_HIGH>; #interrupt-cells = <2>; interrupt-controller; #address-cells = <1>; #size-cells = <0>; pwrkey@1c { compatible = "qcom,pm8018-pwrkey", "qcom,pm8921-pwrkey"; reg = <0x1c>; interrupt-parent = <&pmicintc>; interrupts = <50 IRQ_TYPE_EDGE_RISING>, <51 IRQ_TYPE_EDGE_RISING>; debounce = <15625>; pull-up; }; pmicmpp: mpps@50 { compatible = "qcom,pm8018-mpp", "qcom,ssbi-mpp"; interrupt-controller; #interrupt-cells = <2>; reg = <0x50>; gpio-controller; #gpio-cells = <2>; gpio-ranges = <&pmicmpp 0 0 6>; }; rtc@11d { compatible = "qcom,pm8018-rtc", "qcom,pm8921-rtc"; interrupt-parent = <&pmicintc>; interrupts = <39 IRQ_TYPE_EDGE_RISING>; reg = <0x11d>; allow-set-time; }; pmicgpio: gpio@150 { compatible = "qcom,pm8018-gpio", "qcom,ssbi-gpio"; reg = <0x150>; interrupt-controller; #interrupt-cells = <2>; gpio-controller; gpio-ranges = <&pmicgpio 0 0 6>; #gpio-cells = <2>; }; }; }; sdcc1bam: dma-controller@12182000 { compatible = "qcom,bam-v1.3.0"; reg = <0x12182000 0x8000>; interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc SDC1_H_CLK>; clock-names = "bam_clk"; #dma-cells = <1>; qcom,ee = <0>; }; sdcc2bam: dma-controller@12142000 { compatible = "qcom,bam-v1.3.0"; reg = <0x12142000 0x8000>; interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc SDC2_H_CLK>; clock-names = "bam_clk"; #dma-cells = <1>; qcom,ee = <0>; }; sdcc1: mmc@12180000 { status = "disabled"; compatible = "arm,pl18x", "arm,primecell"; arm,primecell-periphid = <0x00051180>; reg = <0x12180000 0x2000>; interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>; clock-names = "mclk", "apb_pclk"; bus-width = <8>; max-frequency = <48000000>; cap-sd-highspeed; cap-mmc-highspeed; vmmc-supply = <&vsdcc_fixed>; dmas = <&sdcc1bam 2>, <&sdcc1bam 1>; dma-names = "tx", "rx"; assigned-clocks = <&gcc SDC1_CLK>; assigned-clock-rates = <400000>; }; sdcc2: mmc@12140000 { compatible = "arm,pl18x", "arm,primecell"; arm,primecell-periphid = <0x00051180>; status = "disabled"; reg = <0x12140000 0x2000>; interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc SDC2_CLK>, <&gcc SDC2_H_CLK>; clock-names = "mclk", "apb_pclk"; bus-width = <4>; cap-sd-highspeed; cap-mmc-highspeed; max-frequency = <48000000>; no-1-8-v; vmmc-supply = <&vsdcc_fixed>; dmas = <&sdcc2bam 2>, <&sdcc2bam 1>; dma-names = "tx", "rx"; assigned-clocks = <&gcc SDC2_CLK>; assigned-clock-rates = <400000>; }; tcsr: syscon@1a400000 { compatible = "qcom,tcsr-mdm9615", "syscon"; reg = <0x1a400000 0x100>; }; rpm: rpm@108000 { compatible = "qcom,rpm-mdm9615"; reg = <0x108000 0x1000>; qcom,ipc = <&l2cc 0x8 2>; interrupts = <GIC_SPI 19 IRQ_TYPE_EDGE_RISING>, <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>, <GIC_SPI 22 IRQ_TYPE_EDGE_RISING>; interrupt-names = "ack", "err", "wakeup"; regulators { compatible = "qcom,rpm-pm8018-regulators"; vin_lvs1-supply = <&pm8018_s3>; vdd_l7-supply = <&pm8018_s4>; vdd_l8-supply = <&pm8018_s3>; vdd_l9_l10_l11_l12-supply = <&pm8018_s5>; /* Buck SMPS */ pm8018_s1: s1 { regulator-min-microvolt = <500000>; regulator-max-microvolt = <1150000>; qcom,switch-mode-frequency = <1600000>; bias-pull-down; }; pm8018_s2: s2 { regulator-min-microvolt = <1225000>; regulator-max-microvolt = <1300000>; qcom,switch-mode-frequency = <1600000>; bias-pull-down; }; pm8018_s3: s3 { regulator-always-on; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; qcom,switch-mode-frequency = <1600000>; bias-pull-down; }; pm8018_s4: s4 { regulator-min-microvolt = <2100000>; regulator-max-microvolt = <2200000>; qcom,switch-mode-frequency = <1600000>; bias-pull-down; }; pm8018_s5: s5 { regulator-always-on; regulator-min-microvolt = <1350000>; regulator-max-microvolt = <1350000>; qcom,switch-mode-frequency = <1600000>; bias-pull-down; }; /* PMOS LDO */ pm8018_l2: l2 { regulator-always-on; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; bias-pull-down; }; pm8018_l3: l3 { regulator-always-on; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; bias-pull-down; }; pm8018_l4: l4 { regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; bias-pull-down; }; pm8018_l5: l5 { regulator-min-microvolt = <2850000>; regulator-max-microvolt = <2850000>; bias-pull-down; }; pm8018_l6: l6 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <2850000>; bias-pull-down; }; pm8018_l7: l7 { regulator-min-microvolt = <1850000>; regulator-max-microvolt = <1900000>; bias-pull-down; }; pm8018_l8: l8 { regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; bias-pull-down; }; pm8018_l9: l9 { regulator-min-microvolt = <750000>; regulator-max-microvolt = <1150000>; bias-pull-down; }; pm8018_l10: l10 { regulator-min-microvolt = <1050000>; regulator-max-microvolt = <1050000>; bias-pull-down; }; pm8018_l11: l11 { regulator-min-microvolt = <1050000>; regulator-max-microvolt = <1050000>; bias-pull-down; }; pm8018_l12: l12 { regulator-min-microvolt = <1050000>; regulator-max-microvolt = <1050000>; bias-pull-down; }; pm8018_l13: l13 { regulator-min-microvolt = <1850000>; regulator-max-microvolt = <2950000>; bias-pull-down; }; pm8018_l14: l14 { regulator-min-microvolt = <2850000>; regulator-max-microvolt = <2850000>; bias-pull-down; }; /* Low Voltage Switch */ pm8018_lvs1: lvs1 { bias-pull-down; }; }; }; }; }; |