Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 | /* SPDX-License-Identifier: GPL-2.0 */ /* $Id: sunqe.h,v 1.13 2000/02/09 11:15:42 davem Exp $ * sunqe.h: Definitions for the Sun QuadEthernet driver. * * Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu) */ #ifndef _SUNQE_H #define _SUNQE_H /* QEC global registers. */ #define GLOB_CTRL 0x00UL /* Control */ #define GLOB_STAT 0x04UL /* Status */ #define GLOB_PSIZE 0x08UL /* Packet Size */ #define GLOB_MSIZE 0x0cUL /* Local-memory Size */ #define GLOB_RSIZE 0x10UL /* Receive partition size */ #define GLOB_TSIZE 0x14UL /* Transmit partition size */ #define GLOB_REG_SIZE 0x18UL #define GLOB_CTRL_MMODE 0x40000000 /* MACE qec mode */ #define GLOB_CTRL_BMODE 0x10000000 /* BigMAC qec mode */ #define GLOB_CTRL_EPAR 0x00000020 /* Enable parity */ #define GLOB_CTRL_ACNTRL 0x00000018 /* SBUS arbitration control */ #define GLOB_CTRL_B64 0x00000004 /* 64 byte dvma bursts */ #define GLOB_CTRL_B32 0x00000002 /* 32 byte dvma bursts */ #define GLOB_CTRL_B16 0x00000000 /* 16 byte dvma bursts */ #define GLOB_CTRL_RESET 0x00000001 /* Reset the QEC */ #define GLOB_STAT_TX 0x00000008 /* BigMAC Transmit IRQ */ #define GLOB_STAT_RX 0x00000004 /* BigMAC Receive IRQ */ #define GLOB_STAT_BM 0x00000002 /* BigMAC Global IRQ */ #define GLOB_STAT_ER 0x00000001 /* BigMAC Error IRQ */ #define GLOB_PSIZE_2048 0x00 /* 2k packet size */ #define GLOB_PSIZE_4096 0x01 /* 4k packet size */ #define GLOB_PSIZE_6144 0x10 /* 6k packet size */ #define GLOB_PSIZE_8192 0x11 /* 8k packet size */ /* In MACE mode, there are four qe channels. Each channel has it's own * status bits in the QEC status register. This macro picks out the * ones you want. */ #define GLOB_STAT_PER_QE(status, channel) (((status) >> ((channel) * 4)) & 0xf) /* The following registers are for per-qe channel information/status. */ #define CREG_CTRL 0x00UL /* Control */ #define CREG_STAT 0x04UL /* Status */ #define CREG_RXDS 0x08UL /* RX descriptor ring ptr */ #define CREG_TXDS 0x0cUL /* TX descriptor ring ptr */ #define CREG_RIMASK 0x10UL /* RX Interrupt Mask */ #define CREG_TIMASK 0x14UL /* TX Interrupt Mask */ #define CREG_QMASK 0x18UL /* QEC Error Interrupt Mask */ #define CREG_MMASK 0x1cUL /* MACE Error Interrupt Mask */ #define CREG_RXWBUFPTR 0x20UL /* Local memory rx write ptr */ #define CREG_RXRBUFPTR 0x24UL /* Local memory rx read ptr */ #define CREG_TXWBUFPTR 0x28UL /* Local memory tx write ptr */ #define CREG_TXRBUFPTR 0x2cUL /* Local memory tx read ptr */ #define CREG_CCNT 0x30UL /* Collision Counter */ #define CREG_PIPG 0x34UL /* Inter-Frame Gap */ #define CREG_REG_SIZE 0x38UL #define CREG_CTRL_RXOFF 0x00000004 /* Disable this qe's receiver*/ #define CREG_CTRL_RESET 0x00000002 /* Reset this qe channel */ #define CREG_CTRL_TWAKEUP 0x00000001 /* Transmitter Wakeup, 'go'. */ #define CREG_STAT_EDEFER 0x10000000 /* Excessive Defers */ #define CREG_STAT_CLOSS 0x08000000 /* Carrier Loss */ #define CREG_STAT_ERETRIES 0x04000000 /* More than 16 retries */ #define CREG_STAT_LCOLL 0x02000000 /* Late TX Collision */ #define CREG_STAT_FUFLOW 0x01000000 /* FIFO Underflow */ #define CREG_STAT_JERROR 0x00800000 /* Jabber Error */ #define CREG_STAT_BERROR 0x00400000 /* Babble Error */ #define CREG_STAT_TXIRQ 0x00200000 /* Transmit Interrupt */ #define CREG_STAT_CCOFLOW 0x00100000 /* TX Coll-counter Overflow */ #define CREG_STAT_TXDERROR 0x00080000 /* TX Descriptor is bogus */ #define CREG_STAT_TXLERR 0x00040000 /* Late Transmit Error */ #define CREG_STAT_TXPERR 0x00020000 /* Transmit Parity Error */ #define CREG_STAT_TXSERR 0x00010000 /* Transmit SBUS error ack */ #define CREG_STAT_RCCOFLOW 0x00001000 /* RX Coll-counter Overflow */ #define CREG_STAT_RUOFLOW 0x00000800 /* Runt Counter Overflow */ #define CREG_STAT_MCOFLOW 0x00000400 /* Missed Counter Overflow */ #define CREG_STAT_RXFOFLOW 0x00000200 /* RX FIFO Overflow */ #define CREG_STAT_RLCOLL 0x00000100 /* RX Late Collision */ #define CREG_STAT_FCOFLOW 0x00000080 /* Frame Counter Overflow */ #define CREG_STAT_CECOFLOW 0x00000040 /* CRC Error-counter Overflow*/ #define CREG_STAT_RXIRQ 0x00000020 /* Receive Interrupt */ #define CREG_STAT_RXDROP 0x00000010 /* Dropped a RX'd packet */ #define CREG_STAT_RXSMALL 0x00000008 /* Receive buffer too small */ #define CREG_STAT_RXLERR 0x00000004 /* Receive Late Error */ #define CREG_STAT_RXPERR 0x00000002 /* Receive Parity Error */ #define CREG_STAT_RXSERR 0x00000001 /* Receive SBUS Error ACK */ #define CREG_STAT_ERRORS (CREG_STAT_EDEFER|CREG_STAT_CLOSS|CREG_STAT_ERETRIES| \ CREG_STAT_LCOLL|CREG_STAT_FUFLOW|CREG_STAT_JERROR| \ CREG_STAT_BERROR|CREG_STAT_CCOFLOW|CREG_STAT_TXDERROR| \ CREG_STAT_TXLERR|CREG_STAT_TXPERR|CREG_STAT_TXSERR| \ CREG_STAT_RCCOFLOW|CREG_STAT_RUOFLOW|CREG_STAT_MCOFLOW| \ CREG_STAT_RXFOFLOW|CREG_STAT_RLCOLL|CREG_STAT_FCOFLOW| \ CREG_STAT_CECOFLOW|CREG_STAT_RXDROP|CREG_STAT_RXSMALL| \ CREG_STAT_RXLERR|CREG_STAT_RXPERR|CREG_STAT_RXSERR) #define CREG_QMASK_COFLOW 0x00100000 /* CollCntr overflow */ #define CREG_QMASK_TXDERROR 0x00080000 /* TXD error */ #define CREG_QMASK_TXLERR 0x00040000 /* TX late error */ #define CREG_QMASK_TXPERR 0x00020000 /* TX parity error */ #define CREG_QMASK_TXSERR 0x00010000 /* TX sbus error ack */ #define CREG_QMASK_RXDROP 0x00000010 /* RX drop */ #define CREG_QMASK_RXBERROR 0x00000008 /* RX buffer error */ #define CREG_QMASK_RXLEERR 0x00000004 /* RX late error */ #define CREG_QMASK_RXPERR 0x00000002 /* RX parity error */ #define CREG_QMASK_RXSERR 0x00000001 /* RX sbus error ack */ #define CREG_MMASK_EDEFER 0x10000000 /* Excess defer */ #define CREG_MMASK_CLOSS 0x08000000 /* Carrier loss */ #define CREG_MMASK_ERETRY 0x04000000 /* Excess retry */ #define CREG_MMASK_LCOLL 0x02000000 /* Late collision error */ #define CREG_MMASK_UFLOW 0x01000000 /* Underflow */ #define CREG_MMASK_JABBER 0x00800000 /* Jabber error */ #define CREG_MMASK_BABBLE 0x00400000 /* Babble error */ #define CREG_MMASK_OFLOW 0x00000800 /* Overflow */ #define CREG_MMASK_RXCOLL 0x00000400 /* RX Coll-Cntr overflow */ #define CREG_MMASK_RPKT 0x00000200 /* Runt pkt overflow */ #define CREG_MMASK_MPKT 0x00000100 /* Missed pkt overflow */ #define CREG_PIPG_TENAB 0x00000020 /* Enable Throttle */ #define CREG_PIPG_MMODE 0x00000010 /* Manual Mode */ #define CREG_PIPG_WMASK 0x0000000f /* SBUS Wait Mask */ /* Per-channel AMD 79C940 MACE registers. */ #define MREGS_RXFIFO 0x00UL /* Receive FIFO */ #define MREGS_TXFIFO 0x01UL /* Transmit FIFO */ #define MREGS_TXFCNTL 0x02UL /* Transmit Frame Control */ #define MREGS_TXFSTAT 0x03UL /* Transmit Frame Status */ #define MREGS_TXRCNT 0x04UL /* Transmit Retry Count */ #define MREGS_RXFCNTL 0x05UL /* Receive Frame Control */ #define MREGS_RXFSTAT 0x06UL /* Receive Frame Status */ #define MREGS_FFCNT 0x07UL /* FIFO Frame Count */ #define MREGS_IREG 0x08UL /* Interrupt Register */ #define MREGS_IMASK 0x09UL /* Interrupt Mask */ #define MREGS_POLL 0x0aUL /* POLL Register */ #define MREGS_BCONFIG 0x0bUL /* BIU Config */ #define MREGS_FCONFIG 0x0cUL /* FIFO Config */ #define MREGS_MCONFIG 0x0dUL /* MAC Config */ #define MREGS_PLSCONFIG 0x0eUL /* PLS Config */ #define MREGS_PHYCONFIG 0x0fUL /* PHY Config */ #define MREGS_CHIPID1 0x10UL /* Chip-ID, low bits */ #define MREGS_CHIPID2 0x11UL /* Chip-ID, high bits */ #define MREGS_IACONFIG 0x12UL /* Internal Address Config */ /* 0x13UL, reserved */ #define MREGS_FILTER 0x14UL /* Logical Address Filter */ #define MREGS_ETHADDR 0x15UL /* Our Ethernet Address */ /* 0x16UL, reserved */ /* 0x17UL, reserved */ #define MREGS_MPCNT 0x18UL /* Missed Packet Count */ /* 0x19UL, reserved */ #define MREGS_RPCNT 0x1aUL /* Runt Packet Count */ #define MREGS_RCCNT 0x1bUL /* RX Collision Count */ /* 0x1cUL, reserved */ #define MREGS_UTEST 0x1dUL /* User Test */ #define MREGS_RTEST1 0x1eUL /* Reserved Test 1 */ #define MREGS_RTEST2 0x1fUL /* Reserved Test 2 */ #define MREGS_REG_SIZE 0x20UL #define MREGS_TXFCNTL_DRETRY 0x80 /* Retry disable */ #define MREGS_TXFCNTL_DFCS 0x08 /* Disable TX FCS */ #define MREGS_TXFCNTL_AUTOPAD 0x01 /* TX auto pad */ #define MREGS_TXFSTAT_VALID 0x80 /* TX valid */ #define MREGS_TXFSTAT_UNDERFLOW 0x40 /* TX underflow */ #define MREGS_TXFSTAT_LCOLL 0x20 /* TX late collision */ #define MREGS_TXFSTAT_MRETRY 0x10 /* TX > 1 retries */ #define MREGS_TXFSTAT_ORETRY 0x08 /* TX 1 retry */ #define MREGS_TXFSTAT_PDEFER 0x04 /* TX pkt deferred */ #define MREGS_TXFSTAT_CLOSS 0x02 /* TX carrier lost */ #define MREGS_TXFSTAT_RERROR 0x01 /* TX retry error */ #define MREGS_TXRCNT_EDEFER 0x80 /* TX Excess defers */ #define MREGS_TXRCNT_CMASK 0x0f /* TX retry count */ #define MREGS_RXFCNTL_LOWLAT 0x08 /* RX low latency */ #define MREGS_RXFCNTL_AREJECT 0x04 /* RX addr match rej */ #define MREGS_RXFCNTL_AUTOSTRIP 0x01 /* RX auto strip */ #define MREGS_RXFSTAT_OVERFLOW 0x80 /* RX overflow */ #define MREGS_RXFSTAT_LCOLL 0x40 /* RX late collision */ #define MREGS_RXFSTAT_FERROR 0x20 /* RX framing error */ #define MREGS_RXFSTAT_FCSERROR 0x10 /* RX FCS error */ #define MREGS_RXFSTAT_RBCNT 0x0f /* RX msg byte count */ #define MREGS_FFCNT_RX 0xf0 /* RX FIFO frame cnt */ #define MREGS_FFCNT_TX 0x0f /* TX FIFO frame cnt */ #define MREGS_IREG_JABBER 0x80 /* IRQ Jabber error */ #define MREGS_IREG_BABBLE 0x40 /* IRQ Babble error */ #define MREGS_IREG_COLL 0x20 /* IRQ Collision error */ #define MREGS_IREG_RCCO 0x10 /* IRQ Collision cnt overflow */ #define MREGS_IREG_RPKTCO 0x08 /* IRQ Runt packet count overflow */ #define MREGS_IREG_MPKTCO 0x04 /* IRQ missed packet cnt overflow */ #define MREGS_IREG_RXIRQ 0x02 /* IRQ RX'd a packet */ #define MREGS_IREG_TXIRQ 0x01 /* IRQ TX'd a packet */ #define MREGS_IMASK_BABBLE 0x40 /* IMASK Babble errors */ #define MREGS_IMASK_COLL 0x20 /* IMASK Collision errors */ #define MREGS_IMASK_MPKTCO 0x04 /* IMASK Missed pkt cnt overflow */ #define MREGS_IMASK_RXIRQ 0x02 /* IMASK RX interrupts */ #define MREGS_IMASK_TXIRQ 0x01 /* IMASK TX interrupts */ #define MREGS_POLL_TXVALID 0x80 /* TX is valid */ #define MREGS_POLL_TDTR 0x40 /* TX data transfer request */ #define MREGS_POLL_RDTR 0x20 /* RX data transfer request */ #define MREGS_BCONFIG_BSWAP 0x40 /* Byte Swap */ #define MREGS_BCONFIG_4TS 0x00 /* 4byte transmit start point */ #define MREGS_BCONFIG_16TS 0x10 /* 16byte transmit start point */ #define MREGS_BCONFIG_64TS 0x20 /* 64byte transmit start point */ #define MREGS_BCONFIG_112TS 0x30 /* 112byte transmit start point */ #define MREGS_BCONFIG_RESET 0x01 /* SW-Reset the MACE */ #define MREGS_FCONFIG_TXF8 0x00 /* TX fifo 8 write cycles */ #define MREGS_FCONFIG_TXF32 0x80 /* TX fifo 32 write cycles */ #define MREGS_FCONFIG_TXF16 0x40 /* TX fifo 16 write cycles */ #define MREGS_FCONFIG_RXF64 0x20 /* RX fifo 64 write cycles */ #define MREGS_FCONFIG_RXF32 0x10 /* RX fifo 32 write cycles */ #define MREGS_FCONFIG_RXF16 0x00 /* RX fifo 16 write cycles */ #define MREGS_FCONFIG_TFWU 0x08 /* TX fifo watermark update */ #define MREGS_FCONFIG_RFWU 0x04 /* RX fifo watermark update */ #define MREGS_FCONFIG_TBENAB 0x02 /* TX burst enable */ #define MREGS_FCONFIG_RBENAB 0x01 /* RX burst enable */ #define MREGS_MCONFIG_PROMISC 0x80 /* Promiscuous mode enable */ #define MREGS_MCONFIG_TPDDISAB 0x40 /* TX 2part deferral enable */ #define MREGS_MCONFIG_MBAENAB 0x20 /* Modified backoff enable */ #define MREGS_MCONFIG_RPADISAB 0x08 /* RX physical addr disable */ #define MREGS_MCONFIG_RBDISAB 0x04 /* RX broadcast disable */ #define MREGS_MCONFIG_TXENAB 0x02 /* Enable transmitter */ #define MREGS_MCONFIG_RXENAB 0x01 /* Enable receiver */ #define MREGS_PLSCONFIG_TXMS 0x08 /* TX mode select */ #define MREGS_PLSCONFIG_GPSI 0x06 /* Use GPSI connector */ #define MREGS_PLSCONFIG_DAI 0x04 /* Use DAI connector */ #define MREGS_PLSCONFIG_TP 0x02 /* Use TwistedPair connector */ #define MREGS_PLSCONFIG_AUI 0x00 /* Use AUI connector */ #define MREGS_PLSCONFIG_IOENAB 0x01 /* PLS I/O enable */ #define MREGS_PHYCONFIG_LSTAT 0x80 /* Link status */ #define MREGS_PHYCONFIG_LTESTDIS 0x40 /* Disable link test logic */ #define MREGS_PHYCONFIG_RXPOLARITY 0x20 /* RX polarity */ #define MREGS_PHYCONFIG_APCDISAB 0x10 /* AutoPolarityCorrect disab */ #define MREGS_PHYCONFIG_LTENAB 0x08 /* Select low threshold */ #define MREGS_PHYCONFIG_AUTO 0x04 /* Connector port auto-sel */ #define MREGS_PHYCONFIG_RWU 0x02 /* Remote WakeUp */ #define MREGS_PHYCONFIG_AW 0x01 /* Auto Wakeup */ #define MREGS_IACONFIG_ACHNGE 0x80 /* Do address change */ #define MREGS_IACONFIG_PARESET 0x04 /* Physical address reset */ #define MREGS_IACONFIG_LARESET 0x02 /* Logical address reset */ #define MREGS_UTEST_RTRENAB 0x80 /* Enable resv test register */ #define MREGS_UTEST_RTRDISAB 0x40 /* Disab resv test register */ #define MREGS_UTEST_RPACCEPT 0x20 /* Accept runt packets */ #define MREGS_UTEST_FCOLL 0x10 /* Force collision status */ #define MREGS_UTEST_FCSENAB 0x08 /* Enable FCS on RX */ #define MREGS_UTEST_INTLOOPM 0x06 /* Intern lpback w/MENDEC */ #define MREGS_UTEST_INTLOOP 0x04 /* Intern lpback */ #define MREGS_UTEST_EXTLOOP 0x02 /* Extern lpback */ #define MREGS_UTEST_NOLOOP 0x00 /* No loopback */ struct qe_rxd { u32 rx_flags; u32 rx_addr; }; #define RXD_OWN 0x80000000 /* Ownership. */ #define RXD_UPDATE 0x10000000 /* Being Updated? */ #define RXD_LENGTH 0x000007ff /* Packet Length. */ struct qe_txd { u32 tx_flags; u32 tx_addr; }; #define TXD_OWN 0x80000000 /* Ownership. */ #define TXD_SOP 0x40000000 /* Start Of Packet */ #define TXD_EOP 0x20000000 /* End Of Packet */ #define TXD_UPDATE 0x10000000 /* Being Updated? */ #define TXD_LENGTH 0x000007ff /* Packet Length. */ #define TX_RING_MAXSIZE 256 #define RX_RING_MAXSIZE 256 #define TX_RING_SIZE 16 #define RX_RING_SIZE 16 #define NEXT_RX(num) (((num) + 1) & (RX_RING_MAXSIZE - 1)) #define NEXT_TX(num) (((num) + 1) & (TX_RING_MAXSIZE - 1)) #define PREV_RX(num) (((num) - 1) & (RX_RING_MAXSIZE - 1)) #define PREV_TX(num) (((num) - 1) & (TX_RING_MAXSIZE - 1)) #define TX_BUFFS_AVAIL(qp) \ (((qp)->tx_old <= (qp)->tx_new) ? \ (qp)->tx_old + (TX_RING_SIZE - 1) - (qp)->tx_new : \ (qp)->tx_old - (qp)->tx_new - 1) struct qe_init_block { struct qe_rxd qe_rxd[RX_RING_MAXSIZE]; struct qe_txd qe_txd[TX_RING_MAXSIZE]; }; #define qib_offset(mem, elem) \ ((__u32)((unsigned long)(&(((struct qe_init_block *)0)->mem[elem])))) struct sunqe; struct sunqec { void __iomem *gregs; /* QEC Global Registers */ struct sunqe *qes[4]; /* Each child MACE */ unsigned int qec_bursts; /* Support burst sizes */ struct platform_device *op; /* QEC's OF device */ struct sunqec *next_module; /* List of all QECs in system */ }; #define PKT_BUF_SZ 1664 #define RXD_PKT_SZ 1664 struct sunqe_buffers { u8 tx_buf[TX_RING_SIZE][PKT_BUF_SZ]; u8 __pad[2]; u8 rx_buf[RX_RING_SIZE][PKT_BUF_SZ]; }; #define qebuf_offset(mem, elem) \ ((__u32)((unsigned long)(&(((struct sunqe_buffers *)0)->mem[elem][0])))) struct sunqe { void __iomem *qcregs; /* QEC per-channel Registers */ void __iomem *mregs; /* Per-channel MACE Registers */ struct qe_init_block *qe_block; /* RX and TX descriptors */ dma_addr_t qblock_dvma; /* RX and TX descriptors */ spinlock_t lock; /* Protects txfull state */ int rx_new, rx_old; /* RX ring extents */ int tx_new, tx_old; /* TX ring extents */ struct sunqe_buffers *buffers; /* CPU visible address. */ dma_addr_t buffers_dvma; /* DVMA visible address. */ struct sunqec *parent; u8 mconfig; /* Base MACE mconfig value */ struct platform_device *op; /* QE's OF device struct */ struct net_device *dev; /* QE's netdevice struct */ int channel; /* Who am I? */ }; #endif /* !(_SUNQE_H) */ |