Linux Audio
Check our new training course
Embedded Linux Audio
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109
/* SPDX-License-Identifier: GPL-2.0-only */ #ifndef P54PCI_H #define P54PCI_H #include <linux/interrupt.h> /* * Defines for PCI based mac80211 Prism54 driver * * Copyright (c) 2006, Michael Wu <flamingice@sourmilk.net> * * Based on the islsm (softmac prism54) driver, which is: * Copyright 2004-2006 Jean-Baptiste Note <jbnote@gmail.com>, et al. */ /* Device Interrupt register bits */ #define ISL38XX_DEV_INT_RESET 0x0001 #define ISL38XX_DEV_INT_UPDATE 0x0002 #define ISL38XX_DEV_INT_WAKEUP 0x0008 #define ISL38XX_DEV_INT_SLEEP 0x0010 #define ISL38XX_DEV_INT_ABORT 0x0020 /* these two only used in USB */ #define ISL38XX_DEV_INT_DATA 0x0040 #define ISL38XX_DEV_INT_MGMT 0x0080 #define ISL38XX_DEV_INT_PCIUART_CTS 0x4000 #define ISL38XX_DEV_INT_PCIUART_DR 0x8000 /* Interrupt Identification/Acknowledge/Enable register bits */ #define ISL38XX_INT_IDENT_UPDATE 0x0002 #define ISL38XX_INT_IDENT_INIT 0x0004 #define ISL38XX_INT_IDENT_WAKEUP 0x0008 #define ISL38XX_INT_IDENT_SLEEP 0x0010 #define ISL38XX_INT_IDENT_PCIUART_CTS 0x4000 #define ISL38XX_INT_IDENT_PCIUART_DR 0x8000 /* Control/Status register bits */ #define ISL38XX_CTRL_STAT_SLEEPMODE 0x00000200 #define ISL38XX_CTRL_STAT_CLKRUN 0x00800000 #define ISL38XX_CTRL_STAT_RESET 0x10000000 #define ISL38XX_CTRL_STAT_RAMBOOT 0x20000000 #define ISL38XX_CTRL_STAT_STARTHALTED 0x40000000 #define ISL38XX_CTRL_STAT_HOST_OVERRIDE 0x80000000 struct p54p_csr { __le32 dev_int; u8 unused_1[12]; __le32 int_ident; __le32 int_ack; __le32 int_enable; u8 unused_2[4]; union { __le32 ring_control_base; __le32 gen_purp_com[2]; }; u8 unused_3[8]; __le32 direct_mem_base; u8 unused_4[44]; __le32 dma_addr; __le32 dma_len; __le32 dma_ctrl; u8 unused_5[12]; __le32 ctrl_stat; u8 unused_6[1924]; u8 cardbus_cis[0x800]; u8 direct_mem_win[0x1000]; } __packed; /* usb backend only needs the register defines above */ #ifndef P54USB_H struct p54p_desc { __le32 host_addr; __le32 device_addr; __le16 len; __le16 flags; } __packed; struct p54p_ring_control { __le32 host_idx[4]; __le32 device_idx[4]; struct p54p_desc rx_data[8]; struct p54p_desc tx_data[32]; struct p54p_desc rx_mgmt[4]; struct p54p_desc tx_mgmt[4]; } __packed; #define P54P_READ(r) (__force __le32)__raw_readl(&priv->map->r) #define P54P_WRITE(r, val) __raw_writel((__force u32)(__le32)(val), &priv->map->r) struct p54p_priv { struct p54_common common; struct pci_dev *pdev; struct p54p_csr __iomem *map; struct tasklet_struct tasklet; const struct firmware *firmware; spinlock_t lock; struct p54p_ring_control *ring_control; dma_addr_t ring_control_dma; u32 rx_idx_data, tx_idx_data; u32 rx_idx_mgmt, tx_idx_mgmt; struct sk_buff *rx_buf_data[8]; struct sk_buff *rx_buf_mgmt[4]; struct sk_buff *tx_buf_data[32]; struct sk_buff *tx_buf_mgmt[4]; struct completion boot_comp; struct completion fw_loaded; }; #endif /* P54USB_H */ #endif /* P54PCI_H */