Loading...
// SPDX-License-Identifier: GPL-2.0 /* Copyright (c) 2019 - 2022 Beijing WangXun Technology Co., Ltd. */ #include <linux/etherdevice.h> #include <linux/iopoll.h> #include <linux/pci.h> #include "../libwx/wx_type.h" #include "../libwx/wx_hw.h" #include "ngbe_type.h" #include "ngbe_hw.h" int ngbe_eeprom_chksum_hostif(struct wx *wx) { struct wx_hic_read_shadow_ram buffer; int status; int tmp; buffer.hdr.req.cmd = NGBE_FW_EEPROM_CHECKSUM_CMD; buffer.hdr.req.buf_lenh = 0; buffer.hdr.req.buf_lenl = 0; buffer.hdr.req.checksum = NGBE_FW_CMD_DEFAULT_CHECKSUM; /* convert offset from words to bytes */ buffer.address = 0; /* one word */ buffer.length = 0; status = wx_host_interface_command(wx, (u32 *)&buffer, sizeof(buffer), WX_HI_COMMAND_TIMEOUT, false); if (status < 0) return status; tmp = rd32a(wx, WX_MNG_MBOX, 1); if (tmp == NGBE_FW_CMD_ST_PASS) return 0; return -EIO; } static int ngbe_reset_misc(struct wx *wx) { wx_reset_misc(wx); if (wx->gpio_ctrl) { /* gpio0 is used to power on/off control*/ wr32(wx, NGBE_GPIO_DDR, 0x1); ngbe_sfp_modules_txrx_powerctl(wx, false); } return 0; } void ngbe_sfp_modules_txrx_powerctl(struct wx *wx, bool swi) { /* gpio0 is used to power on control . 0 is on */ wr32(wx, NGBE_GPIO_DR, swi ? 0 : NGBE_GPIO_DR_0); } /** * ngbe_reset_hw - Perform hardware reset * @wx: pointer to hardware structure * * Resets the hardware by resetting the transmit and receive units, masks * and clears all interrupts, perform a PHY reset, and perform a link (MAC) * reset. **/ int ngbe_reset_hw(struct wx *wx) { u32 val = 0; int ret = 0; /* Call wx stop to disable tx/rx and clear interrupts */ ret = wx_stop_adapter(wx); if (ret != 0) return ret; if (wx->mac_type != em_mac_type_mdi) { val = WX_MIS_RST_LAN_RST(wx->bus.func); wr32(wx, WX_MIS_RST, val | rd32(wx, WX_MIS_RST)); ret = read_poll_timeout(rd32, val, !(val & (BIT(9) << wx->bus.func)), 1000, 100000, false, wx, 0x10028); if (ret) { wx_err(wx, "Lan reset exceed s maximum times.\n"); return ret; } } ngbe_reset_misc(wx); /* Store the permanent mac address */ wx_get_mac_addr(wx, wx->mac.perm_addr); /* reset num_rar_entries to 128 */ wx->mac.num_rar_entries = NGBE_RAR_ENTRIES; wx_init_rx_addrs(wx); pci_set_master(wx->pdev); return 0; } |