Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 593 594 595 596 597 598 599 600 601 602 603 604 605 606 607 608 609 610 611 612 613 614 615 616 617 618 619 620 621 622 623 624 625 626 627 628 629 630 631 632 633 634 635 636 637 638 639 640 641 642 643 644 645 646 647 648 649 650 651 652 653 654 655 656 657 658 659 660 661 662 663 664 665 666 667 668 669 670 671 672 673 674 675 676 677 678 679 680 681 682 683 684 685 686 687 688 689 690 691 692 693 694 695 696 697 698 699 700 701 702 703 704 705 706 707 708 709 710 711 712 713 714 715 716 717 718 719 720 721 722 723 724 725 726 727 728 729 730 731 732 733 734 735 736 737 738 739 740 741 742 743 744 745 746 747 748 749 750 751 752 753 754 755 756 757 758 759 760 761 762 763 764 765 766 767 768 769 770 771 772 773 774 775 776 777 778 779 780 781 782 783 784 785 786 787 788 789 790 791 792 793 794 795 796 797 798 799 800 801 802 803 804 805 806 807 808 809 810 811 812 813 814 815 816 817 818 819 820 821 822 823 824 825 826 827 828 829 830 831 832 833 834 835 836 837 838 839 840 841 842 843 844 845 846 847 848 849 850 851 852 853 854 855 856 857 858 859 860 861 862 863 864 865 866 867 868 869 870 871 872 873 874 875 876 877 878 879 880 881 882 883 884 885 886 887 888 889 890 891 892 893 894 895 896 897 898 899 900 901 902 903 904 905 906 907 908 909 910 911 912 913 914 915 916 917 918 919 920 921 922 923 924 925 926 927 928 929 930 931 932 933 934 935 936 937 938 939 940 941 942 943 944 945 946 947 948 949 950 951 952 953 954 955 956 957 958 959 960 961 962 963 964 965 966 967 968 969 970 971 972 973 974 975 976 977 978 979 980 981 982 983 984 985 986 987 988 989 990 991 992 993 994 995 996 997 998 999 1000 1001 1002 1003 1004 1005 1006 1007 1008 1009 1010 1011 1012 1013 1014 1015 1016 1017 1018 1019 1020 1021 1022 1023 1024 1025 1026 1027 1028 1029 1030 1031 1032 1033 1034 1035 1036 1037 1038 1039 1040 1041 1042 1043 1044 1045 1046 1047 1048 1049 1050 1051 1052 1053 1054 1055 1056 1057 1058 1059 1060 1061 1062 1063 1064 1065 1066 1067 1068 1069 1070 1071 1072 1073 1074 1075 1076 1077 1078 1079 1080 1081 1082 1083 1084 1085 1086 1087 1088 1089 1090 1091 1092 1093 1094 1095 1096 1097 1098 1099 1100 1101 1102 1103 1104 1105 1106 1107 1108 1109 1110 1111 1112 1113 1114 1115 1116 1117 1118 1119 1120 1121 1122 1123 1124 1125 1126 1127 1128 1129 1130 1131 1132 1133 1134 1135 1136 1137 1138 1139 1140 1141 1142 1143 1144 1145 1146 1147 1148 1149 1150 1151 1152 1153 1154 1155 1156 1157 1158 1159 1160 1161 1162 1163 1164 1165 1166 1167 1168 1169 1170 1171 1172 1173 1174 1175 1176 1177 1178 1179 1180 1181 1182 1183 1184 1185 1186 1187 1188 1189 1190 1191 1192 1193 1194 1195 1196 1197 1198 1199 1200 1201 1202 1203 1204 1205 1206 1207 1208 1209 1210 1211 1212 1213 1214 1215 1216 1217 1218 1219 1220 1221 1222 1223 1224 1225 1226 1227 1228 1229 1230 1231 1232 1233 1234 1235 1236 1237 1238 1239 1240 1241 1242 1243 1244 1245 1246 1247 1248 1249 1250 1251 1252 1253 1254 1255 | /* SPDX-License-Identifier: GPL-2.0 */ /* include/asm-m68knommu/MC68EZ328.h: 'EZ328 control registers * * Copyright (C) 1999 Vladimir Gurevich <vgurevic@cisco.com> * Bear & Hare Software, Inc. * * Based on include/asm-m68knommu/MC68332.h * Copyright (C) 1998 Kenneth Albanowski <kjahds@kjahds.com>, * The Silver Hammer Group, Ltd. * */ #include <linux/compiler.h> #ifndef _MC68EZ328_H_ #define _MC68EZ328_H_ #define BYTE_REF(addr) (*((volatile unsigned char*)addr)) #define WORD_REF(addr) (*((volatile unsigned short*)addr)) #define LONG_REF(addr) (*((volatile unsigned long*)addr)) #define PUT_FIELD(field, val) (((val) << field##_SHIFT) & field##_MASK) #define GET_FIELD(reg, field) (((reg) & field##_MASK) >> field##_SHIFT) /********** * * 0xFFFFF0xx -- System Control * **********/ /* * System Control Register (SCR) */ #define SCR_ADDR 0xfffff000 #define SCR BYTE_REF(SCR_ADDR) #define SCR_WDTH8 0x01 /* 8-Bit Width Select */ #define SCR_DMAP 0x04 /* Double Map */ #define SCR_SO 0x08 /* Supervisor Only */ #define SCR_BETEN 0x10 /* Bus-Error Time-Out Enable */ #define SCR_PRV 0x20 /* Privilege Violation */ #define SCR_WPV 0x40 /* Write Protect Violation */ #define SCR_BETO 0x80 /* Bus-Error TimeOut */ /* * Silicon ID Register (Mask Revision Register (MRR) for '328 Compatibility) */ #define MRR_ADDR 0xfffff004 #define MRR LONG_REF(MRR_ADDR) /********** * * 0xFFFFF1xx -- Chip-Select logic * **********/ /* * Chip Select Group Base Registers */ #define CSGBA_ADDR 0xfffff100 #define CSGBB_ADDR 0xfffff102 #define CSGBC_ADDR 0xfffff104 #define CSGBD_ADDR 0xfffff106 #define CSGBA WORD_REF(CSGBA_ADDR) #define CSGBB WORD_REF(CSGBB_ADDR) #define CSGBC WORD_REF(CSGBC_ADDR) #define CSGBD WORD_REF(CSGBD_ADDR) /* * Chip Select Registers */ #define CSA_ADDR 0xfffff110 #define CSB_ADDR 0xfffff112 #define CSC_ADDR 0xfffff114 #define CSD_ADDR 0xfffff116 #define CSA WORD_REF(CSA_ADDR) #define CSB WORD_REF(CSB_ADDR) #define CSC WORD_REF(CSC_ADDR) #define CSD WORD_REF(CSD_ADDR) #define CSA_EN 0x0001 /* Chip-Select Enable */ #define CSA_SIZ_MASK 0x000e /* Chip-Select Size */ #define CSA_SIZ_SHIFT 1 #define CSA_WS_MASK 0x0070 /* Wait State */ #define CSA_WS_SHIFT 4 #define CSA_BSW 0x0080 /* Data Bus Width */ #define CSA_FLASH 0x0100 /* FLASH Memory Support */ #define CSA_RO 0x8000 /* Read-Only */ #define CSB_EN 0x0001 /* Chip-Select Enable */ #define CSB_SIZ_MASK 0x000e /* Chip-Select Size */ #define CSB_SIZ_SHIFT 1 #define CSB_WS_MASK 0x0070 /* Wait State */ #define CSB_WS_SHIFT 4 #define CSB_BSW 0x0080 /* Data Bus Width */ #define CSB_FLASH 0x0100 /* FLASH Memory Support */ #define CSB_UPSIZ_MASK 0x1800 /* Unprotected memory block size */ #define CSB_UPSIZ_SHIFT 11 #define CSB_ROP 0x2000 /* Readonly if protected */ #define CSB_SOP 0x4000 /* Supervisor only if protected */ #define CSB_RO 0x8000 /* Read-Only */ #define CSC_EN 0x0001 /* Chip-Select Enable */ #define CSC_SIZ_MASK 0x000e /* Chip-Select Size */ #define CSC_SIZ_SHIFT 1 #define CSC_WS_MASK 0x0070 /* Wait State */ #define CSC_WS_SHIFT 4 #define CSC_BSW 0x0080 /* Data Bus Width */ #define CSC_FLASH 0x0100 /* FLASH Memory Support */ #define CSC_UPSIZ_MASK 0x1800 /* Unprotected memory block size */ #define CSC_UPSIZ_SHIFT 11 #define CSC_ROP 0x2000 /* Readonly if protected */ #define CSC_SOP 0x4000 /* Supervisor only if protected */ #define CSC_RO 0x8000 /* Read-Only */ #define CSD_EN 0x0001 /* Chip-Select Enable */ #define CSD_SIZ_MASK 0x000e /* Chip-Select Size */ #define CSD_SIZ_SHIFT 1 #define CSD_WS_MASK 0x0070 /* Wait State */ #define CSD_WS_SHIFT 4 #define CSD_BSW 0x0080 /* Data Bus Width */ #define CSD_FLASH 0x0100 /* FLASH Memory Support */ #define CSD_DRAM 0x0200 /* Dram Selection */ #define CSD_COMB 0x0400 /* Combining */ #define CSD_UPSIZ_MASK 0x1800 /* Unprotected memory block size */ #define CSD_UPSIZ_SHIFT 11 #define CSD_ROP 0x2000 /* Readonly if protected */ #define CSD_SOP 0x4000 /* Supervisor only if protected */ #define CSD_RO 0x8000 /* Read-Only */ /* * Emulation Chip-Select Register */ #define EMUCS_ADDR 0xfffff118 #define EMUCS WORD_REF(EMUCS_ADDR) #define EMUCS_WS_MASK 0x0070 #define EMUCS_WS_SHIFT 4 /********** * * 0xFFFFF2xx -- Phase Locked Loop (PLL) & Power Control * **********/ /* * PLL Control Register */ #define PLLCR_ADDR 0xfffff200 #define PLLCR WORD_REF(PLLCR_ADDR) #define PLLCR_DISPLL 0x0008 /* Disable PLL */ #define PLLCR_CLKEN 0x0010 /* Clock (CLKO pin) enable */ #define PLLCR_PRESC 0x0020 /* VCO prescaler */ #define PLLCR_SYSCLK_SEL_MASK 0x0700 /* System Clock Selection */ #define PLLCR_SYSCLK_SEL_SHIFT 8 #define PLLCR_LCDCLK_SEL_MASK 0x3800 /* LCD Clock Selection */ #define PLLCR_LCDCLK_SEL_SHIFT 11 /* '328-compatible definitions */ #define PLLCR_PIXCLK_SEL_MASK PLLCR_LCDCLK_SEL_MASK #define PLLCR_PIXCLK_SEL_SHIFT PLLCR_LCDCLK_SEL_SHIFT /* * PLL Frequency Select Register */ #define PLLFSR_ADDR 0xfffff202 #define PLLFSR WORD_REF(PLLFSR_ADDR) #define PLLFSR_PC_MASK 0x00ff /* P Count */ #define PLLFSR_PC_SHIFT 0 #define PLLFSR_QC_MASK 0x0f00 /* Q Count */ #define PLLFSR_QC_SHIFT 8 #define PLLFSR_PROT 0x4000 /* Protect P & Q */ #define PLLFSR_CLK32 0x8000 /* Clock 32 (kHz) */ /* * Power Control Register */ #define PCTRL_ADDR 0xfffff207 #define PCTRL BYTE_REF(PCTRL_ADDR) #define PCTRL_WIDTH_MASK 0x1f /* CPU Clock bursts width */ #define PCTRL_WIDTH_SHIFT 0 #define PCTRL_PCEN 0x80 /* Power Control Enable */ /********** * * 0xFFFFF3xx -- Interrupt Controller * **********/ /* * Interrupt Vector Register */ #define IVR_ADDR 0xfffff300 #define IVR BYTE_REF(IVR_ADDR) #define IVR_VECTOR_MASK 0xF8 /* * Interrupt control Register */ #define ICR_ADDR 0xfffff302 #define ICR WORD_REF(ICR_ADDR) #define ICR_POL5 0x0080 /* Polarity Control for IRQ5 */ #define ICR_ET6 0x0100 /* Edge Trigger Select for IRQ6 */ #define ICR_ET3 0x0200 /* Edge Trigger Select for IRQ3 */ #define ICR_ET2 0x0400 /* Edge Trigger Select for IRQ2 */ #define ICR_ET1 0x0800 /* Edge Trigger Select for IRQ1 */ #define ICR_POL6 0x1000 /* Polarity Control for IRQ6 */ #define ICR_POL3 0x2000 /* Polarity Control for IRQ3 */ #define ICR_POL2 0x4000 /* Polarity Control for IRQ2 */ #define ICR_POL1 0x8000 /* Polarity Control for IRQ1 */ /* * Interrupt Mask Register */ #define IMR_ADDR 0xfffff304 #define IMR LONG_REF(IMR_ADDR) /* * Define the names for bit positions first. This is useful for * request_irq */ #define SPI_IRQ_NUM 0 /* SPI interrupt */ #define TMR_IRQ_NUM 1 /* Timer interrupt */ #define UART_IRQ_NUM 2 /* UART interrupt */ #define WDT_IRQ_NUM 3 /* Watchdog Timer interrupt */ #define RTC_IRQ_NUM 4 /* RTC interrupt */ #define KB_IRQ_NUM 6 /* Keyboard Interrupt */ #define PWM_IRQ_NUM 7 /* Pulse-Width Modulator int. */ #define INT0_IRQ_NUM 8 /* External INT0 */ #define INT1_IRQ_NUM 9 /* External INT1 */ #define INT2_IRQ_NUM 10 /* External INT2 */ #define INT3_IRQ_NUM 11 /* External INT3 */ #define IRQ1_IRQ_NUM 16 /* IRQ1 */ #define IRQ2_IRQ_NUM 17 /* IRQ2 */ #define IRQ3_IRQ_NUM 18 /* IRQ3 */ #define IRQ6_IRQ_NUM 19 /* IRQ6 */ #define IRQ5_IRQ_NUM 20 /* IRQ5 */ #define SAM_IRQ_NUM 22 /* Sampling Timer for RTC */ #define EMIQ_IRQ_NUM 23 /* Emulator Interrupt */ /* '328-compatible definitions */ #define SPIM_IRQ_NUM SPI_IRQ_NUM #define TMR1_IRQ_NUM TMR_IRQ_NUM /* * Here go the bitmasks themselves */ #define IMR_MSPI (1 << SPI_IRQ_NUM) /* Mask SPI interrupt */ #define IMR_MTMR (1 << TMR_IRQ_NUM) /* Mask Timer interrupt */ #define IMR_MUART (1 << UART_IRQ_NUM) /* Mask UART interrupt */ #define IMR_MWDT (1 << WDT_IRQ_NUM) /* Mask Watchdog Timer interrupt */ #define IMR_MRTC (1 << RTC_IRQ_NUM) /* Mask RTC interrupt */ #define IMR_MKB (1 << KB_IRQ_NUM) /* Mask Keyboard Interrupt */ #define IMR_MPWM (1 << PWM_IRQ_NUM) /* Mask Pulse-Width Modulator int. */ #define IMR_MINT0 (1 << INT0_IRQ_NUM) /* Mask External INT0 */ #define IMR_MINT1 (1 << INT1_IRQ_NUM) /* Mask External INT1 */ #define IMR_MINT2 (1 << INT2_IRQ_NUM) /* Mask External INT2 */ #define IMR_MINT3 (1 << INT3_IRQ_NUM) /* Mask External INT3 */ #define IMR_MIRQ1 (1 << IRQ1_IRQ_NUM) /* Mask IRQ1 */ #define IMR_MIRQ2 (1 << IRQ2_IRQ_NUM) /* Mask IRQ2 */ #define IMR_MIRQ3 (1 << IRQ3_IRQ_NUM) /* Mask IRQ3 */ #define IMR_MIRQ6 (1 << IRQ6_IRQ_NUM) /* Mask IRQ6 */ #define IMR_MIRQ5 (1 << IRQ5_IRQ_NUM) /* Mask IRQ5 */ #define IMR_MSAM (1 << SAM_IRQ_NUM) /* Mask Sampling Timer for RTC */ #define IMR_MEMIQ (1 << EMIQ_IRQ_NUM) /* Mask Emulator Interrupt */ /* '328-compatible definitions */ #define IMR_MSPIM IMR_MSPI #define IMR_MTMR1 IMR_MTMR /* * Interrupt Status Register */ #define ISR_ADDR 0xfffff30c #define ISR LONG_REF(ISR_ADDR) #define ISR_SPI (1 << SPI_IRQ_NUM) /* SPI interrupt */ #define ISR_TMR (1 << TMR_IRQ_NUM) /* Timer interrupt */ #define ISR_UART (1 << UART_IRQ_NUM) /* UART interrupt */ #define ISR_WDT (1 << WDT_IRQ_NUM) /* Watchdog Timer interrupt */ #define ISR_RTC (1 << RTC_IRQ_NUM) /* RTC interrupt */ #define ISR_KB (1 << KB_IRQ_NUM) /* Keyboard Interrupt */ #define ISR_PWM (1 << PWM_IRQ_NUM) /* Pulse-Width Modulator interrupt */ #define ISR_INT0 (1 << INT0_IRQ_NUM) /* External INT0 */ #define ISR_INT1 (1 << INT1_IRQ_NUM) /* External INT1 */ #define ISR_INT2 (1 << INT2_IRQ_NUM) /* External INT2 */ #define ISR_INT3 (1 << INT3_IRQ_NUM) /* External INT3 */ #define ISR_IRQ1 (1 << IRQ1_IRQ_NUM) /* IRQ1 */ #define ISR_IRQ2 (1 << IRQ2_IRQ_NUM) /* IRQ2 */ #define ISR_IRQ3 (1 << IRQ3_IRQ_NUM) /* IRQ3 */ #define ISR_IRQ6 (1 << IRQ6_IRQ_NUM) /* IRQ6 */ #define ISR_IRQ5 (1 << IRQ5_IRQ_NUM) /* IRQ5 */ #define ISR_SAM (1 << SAM_IRQ_NUM) /* Sampling Timer for RTC */ #define ISR_EMIQ (1 << EMIQ_IRQ_NUM) /* Emulator Interrupt */ /* '328-compatible definitions */ #define ISR_SPIM ISR_SPI #define ISR_TMR1 ISR_TMR /* * Interrupt Pending Register */ #define IPR_ADDR 0xfffff30c #define IPR LONG_REF(IPR_ADDR) #define IPR_SPI (1 << SPI_IRQ_NUM) /* SPI interrupt */ #define IPR_TMR (1 << TMR_IRQ_NUM) /* Timer interrupt */ #define IPR_UART (1 << UART_IRQ_NUM) /* UART interrupt */ #define IPR_WDT (1 << WDT_IRQ_NUM) /* Watchdog Timer interrupt */ #define IPR_RTC (1 << RTC_IRQ_NUM) /* RTC interrupt */ #define IPR_KB (1 << KB_IRQ_NUM) /* Keyboard Interrupt */ #define IPR_PWM (1 << PWM_IRQ_NUM) /* Pulse-Width Modulator interrupt */ #define IPR_INT0 (1 << INT0_IRQ_NUM) /* External INT0 */ #define IPR_INT1 (1 << INT1_IRQ_NUM) /* External INT1 */ #define IPR_INT2 (1 << INT2_IRQ_NUM) /* External INT2 */ #define IPR_INT3 (1 << INT3_IRQ_NUM) /* External INT3 */ #define IPR_IRQ1 (1 << IRQ1_IRQ_NUM) /* IRQ1 */ #define IPR_IRQ2 (1 << IRQ2_IRQ_NUM) /* IRQ2 */ #define IPR_IRQ3 (1 << IRQ3_IRQ_NUM) /* IRQ3 */ #define IPR_IRQ6 (1 << IRQ6_IRQ_NUM) /* IRQ6 */ #define IPR_IRQ5 (1 << IRQ5_IRQ_NUM) /* IRQ5 */ #define IPR_SAM (1 << SAM_IRQ_NUM) /* Sampling Timer for RTC */ #define IPR_EMIQ (1 << EMIQ_IRQ_NUM) /* Emulator Interrupt */ /* '328-compatible definitions */ #define IPR_SPIM IPR_SPI #define IPR_TMR1 IPR_TMR /********** * * 0xFFFFF4xx -- Parallel Ports * **********/ /* * Port A */ #define PADIR_ADDR 0xfffff400 /* Port A direction reg */ #define PADATA_ADDR 0xfffff401 /* Port A data register */ #define PAPUEN_ADDR 0xfffff402 /* Port A Pull-Up enable reg */ #define PADIR BYTE_REF(PADIR_ADDR) #define PADATA BYTE_REF(PADATA_ADDR) #define PAPUEN BYTE_REF(PAPUEN_ADDR) #define PA(x) (1 << (x)) /* * Port B */ #define PBDIR_ADDR 0xfffff408 /* Port B direction reg */ #define PBDATA_ADDR 0xfffff409 /* Port B data register */ #define PBPUEN_ADDR 0xfffff40a /* Port B Pull-Up enable reg */ #define PBSEL_ADDR 0xfffff40b /* Port B Select Register */ #define PBDIR BYTE_REF(PBDIR_ADDR) #define PBDATA BYTE_REF(PBDATA_ADDR) #define PBPUEN BYTE_REF(PBPUEN_ADDR) #define PBSEL BYTE_REF(PBSEL_ADDR) #define PB(x) (1 << (x)) #define PB_CSB0 0x01 /* Use CSB0 as PB[0] */ #define PB_CSB1 0x02 /* Use CSB1 as PB[1] */ #define PB_CSC0_RAS0 0x04 /* Use CSC0/RAS0 as PB[2] */ #define PB_CSC1_RAS1 0x08 /* Use CSC1/RAS1 as PB[3] */ #define PB_CSD0_CAS0 0x10 /* Use CSD0/CAS0 as PB[4] */ #define PB_CSD1_CAS1 0x20 /* Use CSD1/CAS1 as PB[5] */ #define PB_TIN_TOUT 0x40 /* Use TIN/TOUT as PB[6] */ #define PB_PWMO 0x80 /* Use PWMO as PB[7] */ /* * Port C */ #define PCDIR_ADDR 0xfffff410 /* Port C direction reg */ #define PCDATA_ADDR 0xfffff411 /* Port C data register */ #define PCPDEN_ADDR 0xfffff412 /* Port C Pull-Down enb. reg */ #define PCSEL_ADDR 0xfffff413 /* Port C Select Register */ #define PCDIR BYTE_REF(PCDIR_ADDR) #define PCDATA BYTE_REF(PCDATA_ADDR) #define PCPDEN BYTE_REF(PCPDEN_ADDR) #define PCSEL BYTE_REF(PCSEL_ADDR) #define PC(x) (1 << (x)) #define PC_LD0 0x01 /* Use LD0 as PC[0] */ #define PC_LD1 0x02 /* Use LD1 as PC[1] */ #define PC_LD2 0x04 /* Use LD2 as PC[2] */ #define PC_LD3 0x08 /* Use LD3 as PC[3] */ #define PC_LFLM 0x10 /* Use LFLM as PC[4] */ #define PC_LLP 0x20 /* Use LLP as PC[5] */ #define PC_LCLK 0x40 /* Use LCLK as PC[6] */ #define PC_LACD 0x80 /* Use LACD as PC[7] */ /* * Port D */ #define PDDIR_ADDR 0xfffff418 /* Port D direction reg */ #define PDDATA_ADDR 0xfffff419 /* Port D data register */ #define PDPUEN_ADDR 0xfffff41a /* Port D Pull-Up enable reg */ #define PDSEL_ADDR 0xfffff41b /* Port D Select Register */ #define PDPOL_ADDR 0xfffff41c /* Port D Polarity Register */ #define PDIRQEN_ADDR 0xfffff41d /* Port D IRQ enable register */ #define PDKBEN_ADDR 0xfffff41e /* Port D Keyboard Enable reg */ #define PDIQEG_ADDR 0xfffff41f /* Port D IRQ Edge Register */ #define PDDIR BYTE_REF(PDDIR_ADDR) #define PDDATA BYTE_REF(PDDATA_ADDR) #define PDPUEN BYTE_REF(PDPUEN_ADDR) #define PDSEL BYTE_REF(PDSEL_ADDR) #define PDPOL BYTE_REF(PDPOL_ADDR) #define PDIRQEN BYTE_REF(PDIRQEN_ADDR) #define PDKBEN BYTE_REF(PDKBEN_ADDR) #define PDIQEG BYTE_REF(PDIQEG_ADDR) #define PD(x) (1 << (x)) #define PD_INT0 0x01 /* Use INT0 as PD[0] */ #define PD_INT1 0x02 /* Use INT1 as PD[1] */ #define PD_INT2 0x04 /* Use INT2 as PD[2] */ #define PD_INT3 0x08 /* Use INT3 as PD[3] */ #define PD_IRQ1 0x10 /* Use IRQ1 as PD[4] */ #define PD_IRQ2 0x20 /* Use IRQ2 as PD[5] */ #define PD_IRQ3 0x40 /* Use IRQ3 as PD[6] */ #define PD_IRQ6 0x80 /* Use IRQ6 as PD[7] */ /* * Port E */ #define PEDIR_ADDR 0xfffff420 /* Port E direction reg */ #define PEDATA_ADDR 0xfffff421 /* Port E data register */ #define PEPUEN_ADDR 0xfffff422 /* Port E Pull-Up enable reg */ #define PESEL_ADDR 0xfffff423 /* Port E Select Register */ #define PEDIR BYTE_REF(PEDIR_ADDR) #define PEDATA BYTE_REF(PEDATA_ADDR) #define PEPUEN BYTE_REF(PEPUEN_ADDR) #define PESEL BYTE_REF(PESEL_ADDR) #define PE(x) (1 << (x)) #define PE_SPMTXD 0x01 /* Use SPMTXD as PE[0] */ #define PE_SPMRXD 0x02 /* Use SPMRXD as PE[1] */ #define PE_SPMCLK 0x04 /* Use SPMCLK as PE[2] */ #define PE_DWE 0x08 /* Use DWE as PE[3] */ #define PE_RXD 0x10 /* Use RXD as PE[4] */ #define PE_TXD 0x20 /* Use TXD as PE[5] */ #define PE_RTS 0x40 /* Use RTS as PE[6] */ #define PE_CTS 0x80 /* Use CTS as PE[7] */ /* * Port F */ #define PFDIR_ADDR 0xfffff428 /* Port F direction reg */ #define PFDATA_ADDR 0xfffff429 /* Port F data register */ #define PFPUEN_ADDR 0xfffff42a /* Port F Pull-Up enable reg */ #define PFSEL_ADDR 0xfffff42b /* Port F Select Register */ #define PFDIR BYTE_REF(PFDIR_ADDR) #define PFDATA BYTE_REF(PFDATA_ADDR) #define PFPUEN BYTE_REF(PFPUEN_ADDR) #define PFSEL BYTE_REF(PFSEL_ADDR) #define PF(x) (1 << (x)) #define PF_LCONTRAST 0x01 /* Use LCONTRAST as PF[0] */ #define PF_IRQ5 0x02 /* Use IRQ5 as PF[1] */ #define PF_CLKO 0x04 /* Use CLKO as PF[2] */ #define PF_A20 0x08 /* Use A20 as PF[3] */ #define PF_A21 0x10 /* Use A21 as PF[4] */ #define PF_A22 0x20 /* Use A22 as PF[5] */ #define PF_A23 0x40 /* Use A23 as PF[6] */ #define PF_CSA1 0x80 /* Use CSA1 as PF[7] */ /* * Port G */ #define PGDIR_ADDR 0xfffff430 /* Port G direction reg */ #define PGDATA_ADDR 0xfffff431 /* Port G data register */ #define PGPUEN_ADDR 0xfffff432 /* Port G Pull-Up enable reg */ #define PGSEL_ADDR 0xfffff433 /* Port G Select Register */ #define PGDIR BYTE_REF(PGDIR_ADDR) #define PGDATA BYTE_REF(PGDATA_ADDR) #define PGPUEN BYTE_REF(PGPUEN_ADDR) #define PGSEL BYTE_REF(PGSEL_ADDR) #define PG(x) (1 << (x)) #define PG_BUSW_DTACK 0x01 /* Use BUSW/DTACK as PG[0] */ #define PG_A0 0x02 /* Use A0 as PG[1] */ #define PG_EMUIRQ 0x04 /* Use EMUIRQ as PG[2] */ #define PG_HIZ_P_D 0x08 /* Use HIZ/P/D as PG[3] */ #define PG_EMUCS 0x10 /* Use EMUCS as PG[4] */ #define PG_EMUBRK 0x20 /* Use EMUBRK as PG[5] */ /********** * * 0xFFFFF5xx -- Pulse-Width Modulator (PWM) * **********/ /* * PWM Control Register */ #define PWMC_ADDR 0xfffff500 #define PWMC WORD_REF(PWMC_ADDR) #define PWMC_CLKSEL_MASK 0x0003 /* Clock Selection */ #define PWMC_CLKSEL_SHIFT 0 #define PWMC_REPEAT_MASK 0x000c /* Sample Repeats */ #define PWMC_REPEAT_SHIFT 2 #define PWMC_EN 0x0010 /* Enable PWM */ #define PMNC_FIFOAV 0x0020 /* FIFO Available */ #define PWMC_IRQEN 0x0040 /* Interrupt Request Enable */ #define PWMC_IRQ 0x0080 /* Interrupt Request (FIFO empty) */ #define PWMC_PRESCALER_MASK 0x7f00 /* Incoming Clock prescaler */ #define PWMC_PRESCALER_SHIFT 8 #define PWMC_CLKSRC 0x8000 /* Clock Source Select */ /* '328-compatible definitions */ #define PWMC_PWMEN PWMC_EN /* * PWM Sample Register */ #define PWMS_ADDR 0xfffff502 #define PWMS WORD_REF(PWMS_ADDR) /* * PWM Period Register */ #define PWMP_ADDR 0xfffff504 #define PWMP BYTE_REF(PWMP_ADDR) /* * PWM Counter Register */ #define PWMCNT_ADDR 0xfffff505 #define PWMCNT BYTE_REF(PWMCNT_ADDR) /********** * * 0xFFFFF6xx -- General-Purpose Timer * **********/ /* * Timer Control register */ #define TCTL_ADDR 0xfffff600 #define TCTL WORD_REF(TCTL_ADDR) #define TCTL_TEN 0x0001 /* Timer Enable */ #define TCTL_CLKSOURCE_MASK 0x000e /* Clock Source: */ #define TCTL_CLKSOURCE_STOP 0x0000 /* Stop count (disabled) */ #define TCTL_CLKSOURCE_SYSCLK 0x0002 /* SYSCLK to prescaler */ #define TCTL_CLKSOURCE_SYSCLK_16 0x0004 /* SYSCLK/16 to prescaler */ #define TCTL_CLKSOURCE_TIN 0x0006 /* TIN to prescaler */ #define TCTL_CLKSOURCE_32KHZ 0x0008 /* 32kHz clock to prescaler */ #define TCTL_IRQEN 0x0010 /* IRQ Enable */ #define TCTL_OM 0x0020 /* Output Mode */ #define TCTL_CAP_MASK 0x00c0 /* Capture Edge: */ #define TCTL_CAP_RE 0x0040 /* Capture on rizing edge */ #define TCTL_CAP_FE 0x0080 /* Capture on falling edge */ #define TCTL_FRR 0x0010 /* Free-Run Mode */ /* '328-compatible definitions */ #define TCTL1_ADDR TCTL_ADDR #define TCTL1 TCTL /* * Timer Prescaler Register */ #define TPRER_ADDR 0xfffff602 #define TPRER WORD_REF(TPRER_ADDR) /* '328-compatible definitions */ #define TPRER1_ADDR TPRER_ADDR #define TPRER1 TPRER /* * Timer Compare Register */ #define TCMP_ADDR 0xfffff604 #define TCMP WORD_REF(TCMP_ADDR) /* '328-compatible definitions */ #define TCMP1_ADDR TCMP_ADDR #define TCMP1 TCMP /* * Timer Capture register */ #define TCR_ADDR 0xfffff606 #define TCR WORD_REF(TCR_ADDR) /* '328-compatible definitions */ #define TCR1_ADDR TCR_ADDR #define TCR1 TCR /* * Timer Counter Register */ #define TCN_ADDR 0xfffff608 #define TCN WORD_REF(TCN_ADDR) /* '328-compatible definitions */ #define TCN1_ADDR TCN_ADDR #define TCN1 TCN /* * Timer Status Register */ #define TSTAT_ADDR 0xfffff60a #define TSTAT WORD_REF(TSTAT_ADDR) #define TSTAT_COMP 0x0001 /* Compare Event occurred */ #define TSTAT_CAPT 0x0001 /* Capture Event occurred */ /* '328-compatible definitions */ #define TSTAT1_ADDR TSTAT_ADDR #define TSTAT1 TSTAT /********** * * 0xFFFFF8xx -- Serial Peripheral Interface Master (SPIM) * **********/ /* * SPIM Data Register */ #define SPIMDATA_ADDR 0xfffff800 #define SPIMDATA WORD_REF(SPIMDATA_ADDR) /* * SPIM Control/Status Register */ #define SPIMCONT_ADDR 0xfffff802 #define SPIMCONT WORD_REF(SPIMCONT_ADDR) #define SPIMCONT_BIT_COUNT_MASK 0x000f /* Transfer Length in Bytes */ #define SPIMCONT_BIT_COUNT_SHIFT 0 #define SPIMCONT_POL 0x0010 /* SPMCLK Signel Polarity */ #define SPIMCONT_PHA 0x0020 /* Clock/Data phase relationship */ #define SPIMCONT_IRQEN 0x0040 /* IRQ Enable */ #define SPIMCONT_IRQ 0x0080 /* Interrupt Request */ #define SPIMCONT_XCH 0x0100 /* Exchange */ #define SPIMCONT_ENABLE 0x0200 /* Enable SPIM */ #define SPIMCONT_DATA_RATE_MASK 0xe000 /* SPIM Data Rate */ #define SPIMCONT_DATA_RATE_SHIFT 13 /* '328-compatible definitions */ #define SPIMCONT_SPIMIRQ SPIMCONT_IRQ #define SPIMCONT_SPIMEN SPIMCONT_ENABLE /********** * * 0xFFFFF9xx -- UART * **********/ /* * UART Status/Control Register */ #define USTCNT_ADDR 0xfffff900 #define USTCNT WORD_REF(USTCNT_ADDR) #define USTCNT_TXAE 0x0001 /* Transmitter Available Interrupt Enable */ #define USTCNT_TXHE 0x0002 /* Transmitter Half Empty Enable */ #define USTCNT_TXEE 0x0004 /* Transmitter Empty Interrupt Enable */ #define USTCNT_RXRE 0x0008 /* Receiver Ready Interrupt Enable */ #define USTCNT_RXHE 0x0010 /* Receiver Half-Full Interrupt Enable */ #define USTCNT_RXFE 0x0020 /* Receiver Full Interrupt Enable */ #define USTCNT_CTSD 0x0040 /* CTS Delta Interrupt Enable */ #define USTCNT_ODEN 0x0080 /* Old Data Interrupt Enable */ #define USTCNT_8_7 0x0100 /* Eight or seven-bit transmission */ #define USTCNT_STOP 0x0200 /* Stop bit transmission */ #define USTCNT_ODD 0x0400 /* Odd Parity */ #define USTCNT_PEN 0x0800 /* Parity Enable */ #define USTCNT_CLKM 0x1000 /* Clock Mode Select */ #define USTCNT_TXEN 0x2000 /* Transmitter Enable */ #define USTCNT_RXEN 0x4000 /* Receiver Enable */ #define USTCNT_UEN 0x8000 /* UART Enable */ /* '328-compatible definitions */ #define USTCNT_TXAVAILEN USTCNT_TXAE #define USTCNT_TXHALFEN USTCNT_TXHE #define USTCNT_TXEMPTYEN USTCNT_TXEE #define USTCNT_RXREADYEN USTCNT_RXRE #define USTCNT_RXHALFEN USTCNT_RXHE #define USTCNT_RXFULLEN USTCNT_RXFE #define USTCNT_CTSDELTAEN USTCNT_CTSD #define USTCNT_ODD_EVEN USTCNT_ODD #define USTCNT_PARITYEN USTCNT_PEN #define USTCNT_CLKMODE USTCNT_CLKM #define USTCNT_UARTEN USTCNT_UEN /* * UART Baud Control Register */ #define UBAUD_ADDR 0xfffff902 #define UBAUD WORD_REF(UBAUD_ADDR) #define UBAUD_PRESCALER_MASK 0x003f /* Actual divisor is 65 - PRESCALER */ #define UBAUD_PRESCALER_SHIFT 0 #define UBAUD_DIVIDE_MASK 0x0700 /* Baud Rate freq. divisor */ #define UBAUD_DIVIDE_SHIFT 8 #define UBAUD_BAUD_SRC 0x0800 /* Baud Rate Source */ #define UBAUD_UCLKDIR 0x2000 /* UCLK Direction */ /* * UART Receiver Register */ #define URX_ADDR 0xfffff904 #define URX WORD_REF(URX_ADDR) #define URX_RXDATA_ADDR 0xfffff905 #define URX_RXDATA BYTE_REF(URX_RXDATA_ADDR) #define URX_RXDATA_MASK 0x00ff /* Received data */ #define URX_RXDATA_SHIFT 0 #define URX_PARITY_ERROR 0x0100 /* Parity Error */ #define URX_BREAK 0x0200 /* Break Detected */ #define URX_FRAME_ERROR 0x0400 /* Framing Error */ #define URX_OVRUN 0x0800 /* Serial Overrun */ #define URX_OLD_DATA 0x1000 /* Old data in FIFO */ #define URX_DATA_READY 0x2000 /* Data Ready (FIFO not empty) */ #define URX_FIFO_HALF 0x4000 /* FIFO is Half-Full */ #define URX_FIFO_FULL 0x8000 /* FIFO is Full */ /* * UART Transmitter Register */ #define UTX_ADDR 0xfffff906 #define UTX WORD_REF(UTX_ADDR) #define UTX_TXDATA_ADDR 0xfffff907 #define UTX_TXDATA BYTE_REF(UTX_TXDATA_ADDR) #define UTX_TXDATA_MASK 0x00ff /* Data to be transmitted */ #define UTX_TXDATA_SHIFT 0 #define UTX_CTS_DELTA 0x0100 /* CTS changed */ #define UTX_CTS_STAT 0x0200 /* CTS State */ #define UTX_BUSY 0x0400 /* FIFO is busy, sending a character */ #define UTX_NOCTS 0x0800 /* Ignore CTS */ #define UTX_SEND_BREAK 0x1000 /* Send a BREAK */ #define UTX_TX_AVAIL 0x2000 /* Transmit FIFO has a slot available */ #define UTX_FIFO_HALF 0x4000 /* Transmit FIFO is half empty */ #define UTX_FIFO_EMPTY 0x8000 /* Transmit FIFO is empty */ /* '328-compatible definitions */ #define UTX_CTS_STATUS UTX_CTS_STAT #define UTX_IGNORE_CTS UTX_NOCTS /* * UART Miscellaneous Register */ #define UMISC_ADDR 0xfffff908 #define UMISC WORD_REF(UMISC_ADDR) #define UMISC_TX_POL 0x0004 /* Transmit Polarity */ #define UMISC_RX_POL 0x0008 /* Receive Polarity */ #define UMISC_IRDA_LOOP 0x0010 /* IrDA Loopback Enable */ #define UMISC_IRDA_EN 0x0020 /* Infra-Red Enable */ #define UMISC_RTS 0x0040 /* Set RTS status */ #define UMISC_RTSCONT 0x0080 /* Choose RTS control */ #define UMISC_IR_TEST 0x0400 /* IRDA Test Enable */ #define UMISC_BAUD_RESET 0x0800 /* Reset Baud Rate Generation Counters */ #define UMISC_LOOP 0x1000 /* Serial Loopback Enable */ #define UMISC_FORCE_PERR 0x2000 /* Force Parity Error */ #define UMISC_CLKSRC 0x4000 /* Clock Source */ #define UMISC_BAUD_TEST 0x8000 /* Enable Baud Test Mode */ /* * UART Non-integer Prescaler Register */ #define NIPR_ADDR 0xfffff90a #define NIPR WORD_REF(NIPR_ADDR) #define NIPR_STEP_VALUE_MASK 0x00ff /* NI prescaler step value */ #define NIPR_STEP_VALUE_SHIFT 0 #define NIPR_SELECT_MASK 0x0700 /* Tap Selection */ #define NIPR_SELECT_SHIFT 8 #define NIPR_PRE_SEL 0x8000 /* Non-integer prescaler select */ /* generalization of uart control registers to support multiple ports: */ typedef volatile struct { volatile unsigned short int ustcnt; volatile unsigned short int ubaud; union { volatile unsigned short int w; struct { volatile unsigned char status; volatile unsigned char rxdata; } b; } urx; union { volatile unsigned short int w; struct { volatile unsigned char status; volatile unsigned char txdata; } b; } utx; volatile unsigned short int umisc; volatile unsigned short int nipr; volatile unsigned short int pad1; volatile unsigned short int pad2; } __packed m68328_uart; /********** * * 0xFFFFFAxx -- LCD Controller * **********/ /* * LCD Screen Starting Address Register */ #define LSSA_ADDR 0xfffffa00 #define LSSA LONG_REF(LSSA_ADDR) #define LSSA_SSA_MASK 0x1ffffffe /* Bits 0 and 29-31 are reserved */ /* * LCD Virtual Page Width Register */ #define LVPW_ADDR 0xfffffa05 #define LVPW BYTE_REF(LVPW_ADDR) /* * LCD Screen Width Register (not compatible with '328 !!!) */ #define LXMAX_ADDR 0xfffffa08 #define LXMAX WORD_REF(LXMAX_ADDR) #define LXMAX_XM_MASK 0x02f0 /* Bits 0-3 and 10-15 are reserved */ /* * LCD Screen Height Register */ #define LYMAX_ADDR 0xfffffa0a #define LYMAX WORD_REF(LYMAX_ADDR) #define LYMAX_YM_MASK 0x01ff /* Bits 9-15 are reserved */ /* * LCD Cursor X Position Register */ #define LCXP_ADDR 0xfffffa18 #define LCXP WORD_REF(LCXP_ADDR) #define LCXP_CC_MASK 0xc000 /* Cursor Control */ #define LCXP_CC_TRAMSPARENT 0x0000 #define LCXP_CC_BLACK 0x4000 #define LCXP_CC_REVERSED 0x8000 #define LCXP_CC_WHITE 0xc000 #define LCXP_CXP_MASK 0x02ff /* Cursor X position */ /* * LCD Cursor Y Position Register */ #define LCYP_ADDR 0xfffffa1a #define LCYP WORD_REF(LCYP_ADDR) #define LCYP_CYP_MASK 0x01ff /* Cursor Y Position */ /* * LCD Cursor Width and Heigth Register */ #define LCWCH_ADDR 0xfffffa1c #define LCWCH WORD_REF(LCWCH_ADDR) #define LCWCH_CH_MASK 0x001f /* Cursor Height */ #define LCWCH_CH_SHIFT 0 #define LCWCH_CW_MASK 0x1f00 /* Cursor Width */ #define LCWCH_CW_SHIFT 8 /* * LCD Blink Control Register */ #define LBLKC_ADDR 0xfffffa1f #define LBLKC BYTE_REF(LBLKC_ADDR) #define LBLKC_BD_MASK 0x7f /* Blink Divisor */ #define LBLKC_BD_SHIFT 0 #define LBLKC_BKEN 0x80 /* Blink Enabled */ /* * LCD Panel Interface Configuration Register */ #define LPICF_ADDR 0xfffffa20 #define LPICF BYTE_REF(LPICF_ADDR) #define LPICF_GS_MASK 0x03 /* Gray-Scale Mode */ #define LPICF_GS_BW 0x00 #define LPICF_GS_GRAY_4 0x01 #define LPICF_GS_GRAY_16 0x02 #define LPICF_PBSIZ_MASK 0x0c /* Panel Bus Width */ #define LPICF_PBSIZ_1 0x00 #define LPICF_PBSIZ_2 0x04 #define LPICF_PBSIZ_4 0x08 /* * LCD Polarity Configuration Register */ #define LPOLCF_ADDR 0xfffffa21 #define LPOLCF BYTE_REF(LPOLCF_ADDR) #define LPOLCF_PIXPOL 0x01 /* Pixel Polarity */ #define LPOLCF_LPPOL 0x02 /* Line Pulse Polarity */ #define LPOLCF_FLMPOL 0x04 /* Frame Marker Polarity */ #define LPOLCF_LCKPOL 0x08 /* LCD Shift Lock Polarity */ /* * LACD (LCD Alternate Crystal Direction) Rate Control Register */ #define LACDRC_ADDR 0xfffffa23 #define LACDRC BYTE_REF(LACDRC_ADDR) #define LACDRC_ACDSLT 0x80 /* Signal Source Select */ #define LACDRC_ACD_MASK 0x0f /* Alternate Crystal Direction Control */ #define LACDRC_ACD_SHIFT 0 /* * LCD Pixel Clock Divider Register */ #define LPXCD_ADDR 0xfffffa25 #define LPXCD BYTE_REF(LPXCD_ADDR) #define LPXCD_PCD_MASK 0x3f /* Pixel Clock Divider */ #define LPXCD_PCD_SHIFT 0 /* * LCD Clocking Control Register */ #define LCKCON_ADDR 0xfffffa27 #define LCKCON BYTE_REF(LCKCON_ADDR) #define LCKCON_DWS_MASK 0x0f /* Display Wait-State */ #define LCKCON_DWS_SHIFT 0 #define LCKCON_DWIDTH 0x40 /* Display Memory Width */ #define LCKCON_LCDON 0x80 /* Enable LCD Controller */ /* '328-compatible definitions */ #define LCKCON_DW_MASK LCKCON_DWS_MASK #define LCKCON_DW_SHIFT LCKCON_DWS_SHIFT /* * LCD Refresh Rate Adjustment Register */ #define LRRA_ADDR 0xfffffa29 #define LRRA BYTE_REF(LRRA_ADDR) /* * LCD Panning Offset Register */ #define LPOSR_ADDR 0xfffffa2d #define LPOSR BYTE_REF(LPOSR_ADDR) #define LPOSR_POS_MASK 0x0f /* Pixel Offset Code */ #define LPOSR_POS_SHIFT 0 /* * LCD Frame Rate Control Modulation Register */ #define LFRCM_ADDR 0xfffffa31 #define LFRCM BYTE_REF(LFRCM_ADDR) #define LFRCM_YMOD_MASK 0x0f /* Vertical Modulation */ #define LFRCM_YMOD_SHIFT 0 #define LFRCM_XMOD_MASK 0xf0 /* Horizontal Modulation */ #define LFRCM_XMOD_SHIFT 4 /* * LCD Gray Palette Mapping Register */ #define LGPMR_ADDR 0xfffffa33 #define LGPMR BYTE_REF(LGPMR_ADDR) #define LGPMR_G1_MASK 0x0f #define LGPMR_G1_SHIFT 0 #define LGPMR_G2_MASK 0xf0 #define LGPMR_G2_SHIFT 4 /* * PWM Contrast Control Register */ #define PWMR_ADDR 0xfffffa36 #define PWMR WORD_REF(PWMR_ADDR) #define PWMR_PW_MASK 0x00ff /* Pulse Width */ #define PWMR_PW_SHIFT 0 #define PWMR_CCPEN 0x0100 /* Contrast Control Enable */ #define PWMR_SRC_MASK 0x0600 /* Input Clock Source */ #define PWMR_SRC_LINE 0x0000 /* Line Pulse */ #define PWMR_SRC_PIXEL 0x0200 /* Pixel Clock */ #define PWMR_SRC_LCD 0x4000 /* LCD clock */ /********** * * 0xFFFFFBxx -- Real-Time Clock (RTC) * **********/ /* * RTC Hours Minutes and Seconds Register */ #define RTCTIME_ADDR 0xfffffb00 #define RTCTIME LONG_REF(RTCTIME_ADDR) #define RTCTIME_SECONDS_MASK 0x0000003f /* Seconds */ #define RTCTIME_SECONDS_SHIFT 0 #define RTCTIME_MINUTES_MASK 0x003f0000 /* Minutes */ #define RTCTIME_MINUTES_SHIFT 16 #define RTCTIME_HOURS_MASK 0x1f000000 /* Hours */ #define RTCTIME_HOURS_SHIFT 24 /* * RTC Alarm Register */ #define RTCALRM_ADDR 0xfffffb04 #define RTCALRM LONG_REF(RTCALRM_ADDR) #define RTCALRM_SECONDS_MASK 0x0000003f /* Seconds */ #define RTCALRM_SECONDS_SHIFT 0 #define RTCALRM_MINUTES_MASK 0x003f0000 /* Minutes */ #define RTCALRM_MINUTES_SHIFT 16 #define RTCALRM_HOURS_MASK 0x1f000000 /* Hours */ #define RTCALRM_HOURS_SHIFT 24 /* * Watchdog Timer Register */ #define WATCHDOG_ADDR 0xfffffb0a #define WATCHDOG WORD_REF(WATCHDOG_ADDR) #define WATCHDOG_EN 0x0001 /* Watchdog Enabled */ #define WATCHDOG_ISEL 0x0002 /* Select the watchdog interrupt */ #define WATCHDOG_INTF 0x0080 /* Watchdog interrupt occurred */ #define WATCHDOG_CNT_MASK 0x0300 /* Watchdog Counter */ #define WATCHDOG_CNT_SHIFT 8 /* * RTC Control Register */ #define RTCCTL_ADDR 0xfffffb0c #define RTCCTL WORD_REF(RTCCTL_ADDR) #define RTCCTL_XTL 0x0020 /* Crystal Selection */ #define RTCCTL_EN 0x0080 /* RTC Enable */ /* '328-compatible definitions */ #define RTCCTL_384 RTCCTL_XTL #define RTCCTL_ENABLE RTCCTL_EN /* * RTC Interrupt Status Register */ #define RTCISR_ADDR 0xfffffb0e #define RTCISR WORD_REF(RTCISR_ADDR) #define RTCISR_SW 0x0001 /* Stopwatch timed out */ #define RTCISR_MIN 0x0002 /* 1-minute interrupt has occurred */ #define RTCISR_ALM 0x0004 /* Alarm interrupt has occurred */ #define RTCISR_DAY 0x0008 /* 24-hour rollover interrupt has occurred */ #define RTCISR_1HZ 0x0010 /* 1Hz interrupt has occurred */ #define RTCISR_HR 0x0020 /* 1-hour interrupt has occurred */ #define RTCISR_SAM0 0x0100 /* 4Hz / 4.6875Hz interrupt has occurred */ #define RTCISR_SAM1 0x0200 /* 8Hz / 9.3750Hz interrupt has occurred */ #define RTCISR_SAM2 0x0400 /* 16Hz / 18.7500Hz interrupt has occurred */ #define RTCISR_SAM3 0x0800 /* 32Hz / 37.5000Hz interrupt has occurred */ #define RTCISR_SAM4 0x1000 /* 64Hz / 75.0000Hz interrupt has occurred */ #define RTCISR_SAM5 0x2000 /* 128Hz / 150.0000Hz interrupt has occurred */ #define RTCISR_SAM6 0x4000 /* 256Hz / 300.0000Hz interrupt has occurred */ #define RTCISR_SAM7 0x8000 /* 512Hz / 600.0000Hz interrupt has occurred */ /* * RTC Interrupt Enable Register */ #define RTCIENR_ADDR 0xfffffb10 #define RTCIENR WORD_REF(RTCIENR_ADDR) #define RTCIENR_SW 0x0001 /* Stopwatch interrupt enable */ #define RTCIENR_MIN 0x0002 /* 1-minute interrupt enable */ #define RTCIENR_ALM 0x0004 /* Alarm interrupt enable */ #define RTCIENR_DAY 0x0008 /* 24-hour rollover interrupt enable */ #define RTCIENR_1HZ 0x0010 /* 1Hz interrupt enable */ #define RTCIENR_HR 0x0020 /* 1-hour interrupt enable */ #define RTCIENR_SAM0 0x0100 /* 4Hz / 4.6875Hz interrupt enable */ #define RTCIENR_SAM1 0x0200 /* 8Hz / 9.3750Hz interrupt enable */ #define RTCIENR_SAM2 0x0400 /* 16Hz / 18.7500Hz interrupt enable */ #define RTCIENR_SAM3 0x0800 /* 32Hz / 37.5000Hz interrupt enable */ #define RTCIENR_SAM4 0x1000 /* 64Hz / 75.0000Hz interrupt enable */ #define RTCIENR_SAM5 0x2000 /* 128Hz / 150.0000Hz interrupt enable */ #define RTCIENR_SAM6 0x4000 /* 256Hz / 300.0000Hz interrupt enable */ #define RTCIENR_SAM7 0x8000 /* 512Hz / 600.0000Hz interrupt enable */ /* * Stopwatch Minutes Register */ #define STPWCH_ADDR 0xfffffb12 #define STPWCH WORD_REF(STPWCH) #define STPWCH_CNT_MASK 0x003f /* Stopwatch countdown value */ #define SPTWCH_CNT_SHIFT 0 /* * RTC Day Count Register */ #define DAYR_ADDR 0xfffffb1a #define DAYR WORD_REF(DAYR_ADDR) #define DAYR_DAYS_MASK 0x1ff /* Day Setting */ #define DAYR_DAYS_SHIFT 0 /* * RTC Day Alarm Register */ #define DAYALARM_ADDR 0xfffffb1c #define DAYALARM WORD_REF(DAYALARM_ADDR) #define DAYALARM_DAYSAL_MASK 0x01ff /* Day Setting of the Alarm */ #define DAYALARM_DAYSAL_SHIFT 0 /********** * * 0xFFFFFCxx -- DRAM Controller * **********/ /* * DRAM Memory Configuration Register */ #define DRAMMC_ADDR 0xfffffc00 #define DRAMMC WORD_REF(DRAMMC_ADDR) #define DRAMMC_ROW12_MASK 0xc000 /* Row address bit for MD12 */ #define DRAMMC_ROW12_PA10 0x0000 #define DRAMMC_ROW12_PA21 0x4000 #define DRAMMC_ROW12_PA23 0x8000 #define DRAMMC_ROW0_MASK 0x3000 /* Row address bit for MD0 */ #define DRAMMC_ROW0_PA11 0x0000 #define DRAMMC_ROW0_PA22 0x1000 #define DRAMMC_ROW0_PA23 0x2000 #define DRAMMC_ROW11 0x0800 /* Row address bit for MD11 PA20/PA22 */ #define DRAMMC_ROW10 0x0400 /* Row address bit for MD10 PA19/PA21 */ #define DRAMMC_ROW9 0x0200 /* Row address bit for MD9 PA9/PA19 */ #define DRAMMC_ROW8 0x0100 /* Row address bit for MD8 PA10/PA20 */ #define DRAMMC_COL10 0x0080 /* Col address bit for MD10 PA11/PA0 */ #define DRAMMC_COL9 0x0040 /* Col address bit for MD9 PA10/PA0 */ #define DRAMMC_COL8 0x0020 /* Col address bit for MD8 PA9/PA0 */ #define DRAMMC_REF_MASK 0x001f /* Refresh Cycle */ #define DRAMMC_REF_SHIFT 0 /* * DRAM Control Register */ #define DRAMC_ADDR 0xfffffc02 #define DRAMC WORD_REF(DRAMC_ADDR) #define DRAMC_DWE 0x0001 /* DRAM Write Enable */ #define DRAMC_RST 0x0002 /* Reset Burst Refresh Enable */ #define DRAMC_LPR 0x0004 /* Low-Power Refresh Enable */ #define DRAMC_SLW 0x0008 /* Slow RAM */ #define DRAMC_LSP 0x0010 /* Light Sleep */ #define DRAMC_MSW 0x0020 /* Slow Multiplexing */ #define DRAMC_WS_MASK 0x00c0 /* Wait-states */ #define DRAMC_WS_SHIFT 6 #define DRAMC_PGSZ_MASK 0x0300 /* Page Size for fast page mode */ #define DRAMC_PGSZ_SHIFT 8 #define DRAMC_PGSZ_256K 0x0000 #define DRAMC_PGSZ_512K 0x0100 #define DRAMC_PGSZ_1024K 0x0200 #define DRAMC_PGSZ_2048K 0x0300 #define DRAMC_EDO 0x0400 /* EDO DRAM */ #define DRAMC_CLK 0x0800 /* Refresh Timer Clock source select */ #define DRAMC_BC_MASK 0x3000 /* Page Access Clock Cycle (FP mode) */ #define DRAMC_BC_SHIFT 12 #define DRAMC_RM 0x4000 /* Refresh Mode */ #define DRAMC_EN 0x8000 /* DRAM Controller enable */ /********** * * 0xFFFFFDxx -- In-Circuit Emulation (ICE) * **********/ /* * ICE Module Address Compare Register */ #define ICEMACR_ADDR 0xfffffd00 #define ICEMACR LONG_REF(ICEMACR_ADDR) /* * ICE Module Address Mask Register */ #define ICEMAMR_ADDR 0xfffffd04 #define ICEMAMR LONG_REF(ICEMAMR_ADDR) /* * ICE Module Control Compare Register */ #define ICEMCCR_ADDR 0xfffffd08 #define ICEMCCR WORD_REF(ICEMCCR_ADDR) #define ICEMCCR_PD 0x0001 /* Program/Data Cycle Selection */ #define ICEMCCR_RW 0x0002 /* Read/Write Cycle Selection */ /* * ICE Module Control Mask Register */ #define ICEMCMR_ADDR 0xfffffd0a #define ICEMCMR WORD_REF(ICEMCMR_ADDR) #define ICEMCMR_PDM 0x0001 /* Program/Data Cycle Mask */ #define ICEMCMR_RWM 0x0002 /* Read/Write Cycle Mask */ /* * ICE Module Control Register */ #define ICEMCR_ADDR 0xfffffd0c #define ICEMCR WORD_REF(ICEMCR_ADDR) #define ICEMCR_CEN 0x0001 /* Compare Enable */ #define ICEMCR_PBEN 0x0002 /* Program Break Enable */ #define ICEMCR_SB 0x0004 /* Single Breakpoint */ #define ICEMCR_HMDIS 0x0008 /* HardMap disable */ #define ICEMCR_BBIEN 0x0010 /* Bus Break Interrupt Enable */ /* * ICE Module Status Register */ #define ICEMSR_ADDR 0xfffffd0e #define ICEMSR WORD_REF(ICEMSR_ADDR) #define ICEMSR_EMUEN 0x0001 /* Emulation Enable */ #define ICEMSR_BRKIRQ 0x0002 /* A-Line Vector Fetch Detected */ #define ICEMSR_BBIRQ 0x0004 /* Bus Break Interrupt Detected */ #define ICEMSR_EMIRQ 0x0008 /* EMUIRQ Falling Edge Detected */ #endif /* _MC68EZ328_H_ */ |