Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 | // SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (C) 2018 PHYTEC Messtechnik GmbH * Author: Christian Hemp <c.hemp@phytec.de> */ / { aliases { rtc0 = &i2c_rtc; }; backlight: backlight { compatible = "pwm-backlight"; brightness-levels = <0 4 8 16 32 64 128 255>; default-brightness-level = <7>; power-supply = <®_backlight>; pwms = <&pwm1 0 5000000>; status = "okay"; }; gpio_leds: leds { compatible = "gpio-leds"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gpioleds>; status = "disabled"; led-red { label = "phyboard-mira:red"; gpios = <&gpio5 22 GPIO_ACTIVE_HIGH>; }; led-green { label = "phyboard-mira:green"; gpios = <&gpio5 23 GPIO_ACTIVE_HIGH>; }; led-blue { label = "phyboard-mira:blue"; gpios = <&gpio5 24 GPIO_ACTIVE_HIGH>; linux,default-trigger = "mmc0"; }; }; reg_backlight: regulator-backlight { compatible = "regulator-fixed"; regulator-name = "backlight_3v3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-always-on; }; reg_en_switch: regulator-en-switch { compatible = "regulator-fixed"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_en_switch>; regulator-name = "Enable Switch"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; enable-active-high; gpio = <&gpio3 4 GPIO_ACTIVE_HIGH>; regulator-always-on; }; reg_flexcan1: regulator-flexcan1 { compatible = "regulator-fixed"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_flexcan1_en>; regulator-name = "flexcan1-reg"; regulator-min-microvolt = <1500000>; regulator-max-microvolt = <1500000>; gpio = <&gpio2 20 GPIO_ACTIVE_HIGH>; enable-active-high; }; reg_panel: regulator-panel { compatible = "regulator-fixed"; regulator-name = "panel-power-supply"; regulator-min-microvolt = <12000000>; regulator-max-microvolt = <12000000>; regulator-always-on; }; reg_pcie: regulator-pcie { compatible = "regulator-fixed"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pcie_reg>; regulator-name = "mPCIe_1V5"; regulator-min-microvolt = <1500000>; regulator-max-microvolt = <1500000>; gpio = <&gpio3 0 GPIO_ACTIVE_HIGH>; enable-active-high; }; reg_usb_h1_vbus: usb-h1-vbus { compatible = "regulator-fixed"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usbh1_vbus>; regulator-name = "usb_h1_vbus"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; gpio = <&gpio2 18 GPIO_ACTIVE_HIGH>; enable-active-high; }; reg_usbotg_vbus: usbotg-vbus { compatible = "regulator-fixed"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usbotg_vbus>; regulator-name = "usb_otg_vbus"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>; enable-active-high; }; panel { compatible = "auo,g104sn02"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_panel_en>; power-supply = <®_panel>; enable-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>; backlight = <&backlight>; port { panel_in: endpoint { remote-endpoint = <&lvds0_out>; }; }; }; }; &can1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_flexcan1>; xceiver-supply = <®_flexcan1>; status = "disabled"; }; &hdmi { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_hdmicec>; ddc-i2c-bus = <&i2c2>; status = "disabled"; }; &i2c1 { pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_i2c1>; pinctrl-1 = <&pinctrl_i2c1_gpio>; scl-gpios = <&gpio3 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; sda-gpios = <&gpio3 28 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; clock-frequency = <400000>; status = "disabled"; stmpe: touchctrl@44 { compatible = "st,stmpe811"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_stmpe>; reg = <0x44>; interrupt-parent = <&gpio7>; interrupts = <12 IRQ_TYPE_NONE>; status = "disabled"; stmpe_touchscreen { compatible = "st,stmpe-ts"; st,sample-time = <4>; st,mod-12b = <1>; st,ref-sel = <0>; st,adc-freq = <1>; st,ave-ctrl = <1>; st,touch-det-delay = <2>; st,settling = <2>; st,fraction-z = <7>; st,i-drive = <1>; }; }; i2c_rtc: rtc@68 { compatible = "microcrystal,rv4162"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_rtc_int>; reg = <0x68>; interrupt-parent = <&gpio7>; interrupts = <8 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; }; &i2c2 { pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_i2c2>; pinctrl-1 = <&pinctrl_i2c2_gpio>; scl-gpios = <&gpio4 12 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; sda-gpios = <&gpio4 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; clock-frequency = <100000>; status = "disabled"; }; &ldb { status = "okay"; lvds-channel@0 { fsl,data-mapping = "spwg"; fsl,data-width = <24>; status = "disabled"; port@4 { reg = <4>; lvds0_out: endpoint { remote-endpoint = <&panel_in>; }; }; }; }; &pcie { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pcie>; reset-gpio = <&gpio2 25 GPIO_ACTIVE_LOW>; vpcie-supply = <®_pcie>; status = "disabled"; }; &pwm1 { #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm1>; status = "okay"; }; &uart2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart2>; status = "okay"; }; &uart3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart3>; uart-has-rtscts; status = "disabled"; }; &usbh1 { vbus-supply = <®_usb_h1_vbus>; disable-over-current; status = "disabled"; }; &usbotg { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usbotg>; vbus-supply = <®_usbotg_vbus>; disable-over-current; status = "disabled"; }; &usdhc1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc1>; cd-gpios = <&gpio6 31 GPIO_ACTIVE_LOW>; no-1-8-v; disable-wp; status = "disabled"; }; &iomuxc { pinctrl_panel_en: panelen1grp { fsl,pins = < MX6QDL_PAD_EIM_EB0__GPIO2_IO28 0xb0b1 >; }; pinctrl_en_switch: enswitchgrp { fsl,pins = < MX6QDL_PAD_EIM_DA4__GPIO3_IO04 0xb0b1 >; }; pinctrl_flexcan1: flexcan1grp { fsl,pins = < MX6QDL_PAD_GPIO_7__FLEXCAN1_TX 0x1b0b0 MX6QDL_PAD_GPIO_8__FLEXCAN1_RX 0x1b0b0 >; }; pinctrl_flexcan1_en: flexcan1engrp { fsl,pins = < MX6QDL_PAD_EIM_A18__GPIO2_IO20 0xb0b1 >; }; pinctrl_gpioleds: gpioledsgrp { fsl,pins = < MX6QDL_PAD_CSI0_DAT4__GPIO5_IO22 0x1b0b0 MX6QDL_PAD_CSI0_DAT5__GPIO5_IO23 0x1b0b0 MX6QDL_PAD_CSI0_DAT6__GPIO5_IO24 0x1b0b0 >; }; pinctrl_hdmicec: hdmicecgrp { fsl,pins = < MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0 >; }; pinctrl_i2c1: i2c1grp { fsl,pins = < MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 >; }; pinctrl_i2c1_gpio: i2c1gpiogrp { fsl,pins = < MX6QDL_PAD_EIM_D21__GPIO3_IO21 0x4001b8b1 MX6QDL_PAD_EIM_D28__GPIO3_IO28 0x4001b8b1 >; }; pinctrl_i2c2: i2c2grp { fsl,pins = < MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 >; }; pinctrl_i2c2_gpio: i2c2gpiogrp { fsl,pins = < MX6QDL_PAD_KEY_ROW3__GPIO4_IO13 0x4001b8b1 MX6QDL_PAD_KEY_COL3__GPIO4_IO12 0x4001b8b1 >; }; pinctrl_pcie: pciegrp { fsl,pins = < MX6QDL_PAD_EIM_OE__GPIO2_IO25 0xb0b1 >; }; pinctrl_pcie_reg: pciereggrp { fsl,pins = < MX6QDL_PAD_EIM_DA0__GPIO3_IO00 0xb0b1 >; }; pinctrl_pwm1: pwm1grp { fsl,pins = < MX6QDL_PAD_GPIO_9__PWM1_OUT 0x1b0b1 >; }; pinctrl_rtc_int: rtcintgrp { fsl,pins = < MX6QDL_PAD_SD3_RST__GPIO7_IO08 0x1b0b0 >; }; pinctrl_stmpe: stmpegrp { fsl,pins = < MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b0b0 >; }; pinctrl_uart2: uart2grp { fsl,pins = < MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1 MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1 >; }; pinctrl_uart3: uart3grp { fsl,pins = < MX6QDL_PAD_EIM_EB3__UART3_CTS_B 0x1b0b1 MX6QDL_PAD_EIM_D23__UART3_RTS_B 0x1b0b1 MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1 >; }; pinctrl_usbh1_vbus: usbh1vbusgrp { fsl,pins = < MX6QDL_PAD_EIM_A20__GPIO2_IO18 0xb0b1 >; }; pinctrl_usbotg: usbotggrp { fsl,pins = < MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 >; }; pinctrl_usbotg_vbus: usbotgvbusgrp { fsl,pins = < MX6QDL_PAD_EIM_A19__GPIO2_IO19 0xb0b1 >; }; pinctrl_usdhc1: usdhc1grp { fsl,pins = < MX6QDL_PAD_SD1_CMD__SD1_CMD 0x170f9 MX6QDL_PAD_SD1_CLK__SD1_CLK 0x100f9 MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x170f9 MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x170f9 MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x170f9 MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x170f9 MX6QDL_PAD_EIM_BCLK__GPIO6_IO31 0xb0b1 /* CD */ >; }; }; |