Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 | // SPDX-License-Identifier: GPL-2.0 /* Copyright (c) 2022 Baylibre, SAS. * Author: Jerome Brunet <jbrunet@baylibre.com> */ #include <linux/bitfield.h> #include <linux/delay.h> #include <linux/clk.h> #include <linux/io.h> #include <linux/mdio-mux.h> #include <linux/module.h> #include <linux/platform_device.h> #define ETH_REG2 0x0 #define REG2_PHYID GENMASK(21, 0) #define EPHY_GXL_ID 0x110181 #define REG2_LEDACT GENMASK(23, 22) #define REG2_LEDLINK GENMASK(25, 24) #define REG2_DIV4SEL BIT(27) #define REG2_ADCBYPASS BIT(30) #define REG2_CLKINSEL BIT(31) #define ETH_REG3 0x4 #define REG3_ENH BIT(3) #define REG3_CFGMODE GENMASK(6, 4) #define REG3_AUTOMDIX BIT(7) #define REG3_PHYADDR GENMASK(12, 8) #define REG3_PWRUPRST BIT(21) #define REG3_PWRDOWN BIT(22) #define REG3_LEDPOL BIT(23) #define REG3_PHYMDI BIT(26) #define REG3_CLKINEN BIT(29) #define REG3_PHYIP BIT(30) #define REG3_PHYEN BIT(31) #define ETH_REG4 0x8 #define REG4_PWRUPRSTSIG BIT(0) #define MESON_GXL_MDIO_EXTERNAL_ID 0 #define MESON_GXL_MDIO_INTERNAL_ID 1 struct gxl_mdio_mux { void __iomem *regs; void *mux_handle; }; static void gxl_enable_internal_mdio(struct gxl_mdio_mux *priv) { u32 val; /* Setup the internal phy */ val = (REG3_ENH | FIELD_PREP(REG3_CFGMODE, 0x7) | REG3_AUTOMDIX | FIELD_PREP(REG3_PHYADDR, 8) | REG3_LEDPOL | REG3_PHYMDI | REG3_CLKINEN | REG3_PHYIP); writel(REG4_PWRUPRSTSIG, priv->regs + ETH_REG4); writel(val, priv->regs + ETH_REG3); mdelay(10); /* NOTE: The HW kept the phy id configurable at runtime. * The id below is arbitrary. It is the one used in the vendor code. * The only constraint is that it must match the one in * drivers/net/phy/meson-gxl.c to properly match the PHY. */ writel(FIELD_PREP(REG2_PHYID, EPHY_GXL_ID), priv->regs + ETH_REG2); /* Enable the internal phy */ val |= REG3_PHYEN; writel(val, priv->regs + ETH_REG3); writel(0, priv->regs + ETH_REG4); /* The phy needs a bit of time to power up */ mdelay(10); } static void gxl_enable_external_mdio(struct gxl_mdio_mux *priv) { /* Reset the mdio bus mux to the external phy */ writel(0, priv->regs + ETH_REG3); } static int gxl_mdio_switch_fn(int current_child, int desired_child, void *data) { struct gxl_mdio_mux *priv = dev_get_drvdata(data); if (current_child == desired_child) return 0; switch (desired_child) { case MESON_GXL_MDIO_EXTERNAL_ID: gxl_enable_external_mdio(priv); break; case MESON_GXL_MDIO_INTERNAL_ID: gxl_enable_internal_mdio(priv); break; default: return -EINVAL; } return 0; } static const struct of_device_id gxl_mdio_mux_match[] = { { .compatible = "amlogic,gxl-mdio-mux", }, {}, }; MODULE_DEVICE_TABLE(of, gxl_mdio_mux_match); static int gxl_mdio_mux_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; struct gxl_mdio_mux *priv; struct clk *rclk; int ret; priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); if (!priv) return -ENOMEM; platform_set_drvdata(pdev, priv); priv->regs = devm_platform_ioremap_resource(pdev, 0); if (IS_ERR(priv->regs)) return PTR_ERR(priv->regs); rclk = devm_clk_get_enabled(dev, "ref"); if (IS_ERR(rclk)) return dev_err_probe(dev, PTR_ERR(rclk), "failed to get reference clock\n"); ret = mdio_mux_init(dev, dev->of_node, gxl_mdio_switch_fn, &priv->mux_handle, dev, NULL); if (ret) dev_err_probe(dev, ret, "mdio multiplexer init failed\n"); return ret; } static void gxl_mdio_mux_remove(struct platform_device *pdev) { struct gxl_mdio_mux *priv = platform_get_drvdata(pdev); mdio_mux_uninit(priv->mux_handle); } static struct platform_driver gxl_mdio_mux_driver = { .probe = gxl_mdio_mux_probe, .remove_new = gxl_mdio_mux_remove, .driver = { .name = "gxl-mdio-mux", .of_match_table = gxl_mdio_mux_match, }, }; module_platform_driver(gxl_mdio_mux_driver); MODULE_DESCRIPTION("Amlogic GXL MDIO multiplexer driver"); MODULE_AUTHOR("Jerome Brunet <jbrunet@baylibre.com>"); MODULE_LICENSE("GPL"); |