Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 593 594 595 596 597 598 599 600 601 602 603 604 605 606 607 608 609 610 611 612 613 614 615 616 617 618 619 620 621 622 623 624 625 626 627 628 629 630 631 632 633 634 635 636 637 638 639 640 641 642 643 644 645 646 647 648 649 650 651 652 653 654 655 656 657 658 659 660 661 662 663 664 665 666 667 668 669 670 671 672 673 674 675 676 677 678 679 680 681 682 683 684 685 686 687 688 689 690 691 692 693 694 695 696 697 698 699 700 701 702 703 704 705 706 707 708 709 710 711 712 713 714 715 716 717 718 719 720 721 722 723 724 725 726 727 728 729 730 731 732 733 734 735 736 737 738 739 740 741 742 743 744 745 746 747 748 749 750 751 752 753 754 755 756 757 758 759 760 761 762 763 764 765 766 767 768 769 770 771 772 773 774 775 776 777 778 779 780 781 782 783 784 785 786 787 788 789 790 791 792 793 794 795 796 797 798 799 800 801 802 803 804 805 806 807 808 809 810 811 812 813 814 815 816 817 818 819 820 821 822 823 824 825 826 827 828 829 830 831 832 833 834 835 836 837 838 839 840 841 842 843 844 845 846 847 848 849 850 851 852 853 854 855 856 857 858 859 860 861 862 863 864 865 866 867 868 869 870 871 872 873 874 875 876 877 878 879 880 881 882 883 884 885 886 887 888 889 890 891 892 893 894 895 896 897 898 899 900 901 902 903 904 905 906 907 908 909 910 911 912 913 914 915 916 917 918 919 920 921 922 923 924 925 926 927 928 929 930 931 932 933 934 935 936 937 938 939 940 941 942 943 944 945 946 947 948 949 950 951 952 953 954 955 956 957 958 959 960 961 962 963 964 965 966 967 968 969 970 971 972 973 974 975 976 977 978 979 980 981 982 983 984 985 986 987 988 989 990 991 992 993 994 995 996 997 998 999 1000 1001 1002 1003 1004 1005 1006 1007 1008 1009 1010 1011 1012 1013 1014 1015 1016 1017 1018 1019 1020 1021 1022 1023 1024 1025 1026 1027 1028 1029 1030 1031 1032 1033 1034 1035 1036 1037 1038 1039 1040 1041 1042 1043 1044 1045 1046 1047 1048 1049 1050 1051 1052 1053 1054 1055 1056 1057 1058 1059 1060 1061 1062 1063 1064 1065 1066 1067 1068 1069 1070 1071 1072 1073 1074 1075 1076 1077 1078 1079 1080 1081 1082 1083 1084 1085 1086 1087 1088 1089 1090 1091 1092 1093 1094 1095 1096 1097 1098 1099 1100 1101 1102 1103 1104 1105 1106 1107 1108 1109 1110 1111 1112 1113 1114 1115 1116 1117 1118 1119 1120 1121 1122 1123 1124 1125 1126 1127 1128 1129 1130 1131 1132 1133 1134 1135 1136 1137 1138 1139 1140 1141 1142 1143 1144 1145 1146 1147 1148 1149 1150 1151 1152 1153 1154 1155 1156 1157 1158 1159 1160 1161 1162 1163 1164 1165 1166 1167 1168 1169 1170 1171 1172 1173 1174 1175 1176 1177 1178 1179 1180 1181 1182 1183 1184 1185 1186 1187 1188 1189 1190 1191 1192 1193 1194 1195 1196 1197 1198 1199 1200 1201 1202 1203 1204 1205 1206 1207 1208 1209 1210 1211 1212 1213 1214 1215 1216 1217 1218 1219 1220 1221 1222 1223 1224 1225 1226 1227 1228 1229 1230 1231 1232 1233 1234 1235 1236 1237 1238 1239 1240 1241 1242 1243 1244 1245 1246 1247 1248 1249 1250 1251 1252 1253 1254 1255 1256 1257 1258 1259 1260 1261 1262 1263 1264 1265 1266 1267 1268 1269 1270 1271 1272 1273 1274 1275 1276 1277 1278 1279 1280 1281 1282 1283 1284 1285 1286 1287 1288 1289 1290 1291 1292 1293 1294 1295 1296 1297 1298 1299 1300 1301 1302 1303 1304 1305 1306 1307 1308 1309 1310 1311 1312 1313 1314 1315 1316 1317 1318 1319 1320 1321 1322 1323 1324 1325 1326 1327 1328 1329 1330 1331 1332 1333 1334 1335 1336 1337 1338 1339 1340 1341 1342 1343 1344 1345 1346 1347 1348 1349 1350 1351 1352 1353 1354 1355 1356 1357 1358 1359 1360 1361 1362 1363 1364 1365 1366 1367 1368 1369 1370 1371 1372 1373 1374 1375 1376 1377 1378 1379 1380 1381 1382 1383 1384 1385 1386 1387 1388 1389 1390 1391 1392 1393 1394 1395 1396 1397 1398 1399 1400 1401 1402 1403 1404 1405 1406 1407 1408 1409 1410 1411 1412 1413 1414 1415 1416 1417 1418 1419 1420 1421 1422 1423 1424 1425 1426 1427 1428 1429 1430 1431 1432 1433 1434 1435 1436 1437 1438 1439 1440 1441 1442 1443 1444 1445 1446 1447 1448 1449 1450 1451 1452 1453 1454 1455 1456 1457 1458 1459 1460 1461 1462 1463 1464 1465 1466 1467 1468 1469 1470 1471 1472 1473 1474 1475 1476 1477 1478 1479 1480 1481 1482 1483 1484 1485 1486 1487 1488 1489 1490 1491 1492 1493 1494 1495 1496 1497 1498 1499 1500 1501 1502 1503 1504 1505 1506 1507 1508 1509 1510 1511 1512 1513 1514 1515 1516 1517 1518 1519 1520 1521 1522 1523 1524 1525 1526 1527 1528 1529 1530 1531 1532 1533 1534 1535 1536 1537 1538 1539 1540 1541 1542 1543 1544 1545 1546 1547 1548 1549 1550 1551 1552 1553 1554 1555 1556 1557 1558 1559 1560 1561 1562 1563 1564 1565 1566 1567 1568 1569 1570 1571 1572 1573 1574 1575 1576 1577 1578 1579 1580 1581 1582 1583 1584 1585 1586 1587 1588 1589 1590 1591 1592 1593 1594 1595 1596 1597 1598 1599 1600 1601 1602 1603 1604 1605 1606 1607 1608 1609 1610 1611 1612 1613 1614 1615 1616 1617 1618 1619 1620 1621 1622 1623 1624 1625 1626 1627 1628 1629 1630 1631 1632 1633 1634 1635 1636 1637 1638 1639 1640 1641 1642 1643 1644 1645 1646 1647 1648 1649 1650 1651 1652 1653 1654 1655 1656 1657 1658 1659 1660 1661 1662 1663 1664 1665 1666 1667 1668 1669 1670 1671 1672 1673 1674 1675 1676 1677 1678 1679 1680 1681 1682 1683 1684 1685 1686 1687 1688 1689 1690 1691 1692 1693 1694 1695 1696 1697 1698 1699 1700 1701 1702 1703 1704 1705 1706 1707 1708 1709 1710 1711 1712 1713 1714 1715 1716 1717 1718 1719 1720 1721 1722 1723 1724 1725 1726 1727 1728 1729 1730 1731 1732 1733 1734 1735 1736 1737 1738 1739 1740 1741 1742 1743 1744 1745 1746 1747 1748 1749 1750 1751 1752 1753 1754 1755 1756 1757 1758 1759 1760 1761 1762 1763 1764 1765 1766 1767 1768 1769 1770 1771 1772 1773 1774 1775 1776 1777 1778 1779 1780 1781 1782 1783 1784 1785 1786 1787 1788 1789 1790 1791 1792 1793 1794 1795 1796 1797 1798 1799 1800 1801 1802 1803 1804 1805 1806 1807 1808 1809 1810 1811 1812 1813 1814 1815 1816 1817 1818 1819 1820 1821 1822 1823 1824 1825 1826 1827 1828 1829 1830 1831 1832 1833 1834 1835 1836 1837 1838 1839 1840 1841 1842 1843 1844 1845 1846 1847 1848 1849 1850 1851 1852 1853 1854 1855 1856 1857 1858 1859 1860 1861 1862 1863 1864 1865 1866 1867 1868 1869 1870 1871 1872 1873 1874 1875 1876 1877 1878 1879 1880 1881 1882 1883 1884 1885 1886 1887 1888 1889 1890 1891 1892 1893 1894 1895 1896 1897 1898 1899 1900 1901 1902 1903 1904 1905 1906 1907 1908 1909 1910 1911 1912 1913 1914 1915 1916 1917 1918 1919 1920 1921 1922 1923 1924 1925 1926 1927 1928 1929 1930 1931 1932 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 1943 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 1961 1962 1963 1964 1965 1966 1967 1968 1969 1970 1971 1972 1973 1974 1975 1976 1977 1978 1979 1980 1981 1982 1983 1984 1985 1986 1987 1988 1989 1990 1991 1992 1993 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 2025 2026 2027 2028 2029 2030 2031 2032 2033 2034 2035 2036 2037 2038 2039 2040 2041 2042 2043 2044 2045 2046 2047 2048 2049 2050 2051 2052 2053 2054 2055 2056 2057 2058 2059 2060 2061 2062 2063 2064 2065 2066 2067 2068 2069 2070 2071 2072 2073 2074 2075 2076 2077 2078 2079 2080 2081 2082 2083 2084 2085 2086 2087 2088 2089 2090 2091 2092 2093 2094 2095 2096 2097 2098 2099 2100 2101 2102 2103 2104 2105 2106 2107 2108 2109 2110 2111 2112 2113 2114 2115 2116 2117 2118 2119 2120 2121 2122 2123 2124 2125 2126 2127 2128 2129 2130 2131 2132 2133 2134 2135 2136 2137 2138 2139 2140 2141 2142 2143 2144 2145 2146 2147 2148 2149 2150 2151 2152 2153 2154 2155 2156 2157 2158 2159 2160 2161 2162 2163 2164 2165 2166 2167 2168 2169 2170 2171 2172 2173 2174 2175 2176 2177 2178 2179 2180 2181 2182 2183 2184 2185 2186 2187 2188 2189 2190 2191 2192 2193 2194 2195 2196 2197 2198 2199 2200 2201 2202 2203 2204 2205 2206 2207 2208 2209 2210 2211 2212 2213 2214 2215 2216 2217 2218 2219 2220 2221 2222 2223 2224 2225 2226 2227 2228 2229 2230 2231 2232 2233 2234 2235 2236 2237 2238 2239 2240 2241 2242 2243 2244 2245 2246 2247 2248 2249 2250 2251 2252 2253 2254 2255 2256 2257 2258 2259 2260 2261 2262 2263 2264 2265 2266 2267 2268 2269 2270 2271 2272 2273 2274 2275 2276 2277 2278 2279 2280 2281 2282 2283 2284 2285 2286 2287 2288 2289 2290 2291 2292 2293 2294 2295 2296 2297 2298 2299 2300 2301 2302 2303 2304 2305 2306 2307 2308 2309 2310 2311 2312 2313 2314 2315 2316 2317 2318 2319 2320 2321 2322 2323 2324 2325 2326 2327 2328 2329 2330 2331 2332 2333 2334 2335 2336 2337 2338 2339 2340 2341 2342 2343 2344 2345 2346 2347 2348 2349 2350 2351 2352 2353 2354 2355 2356 2357 2358 2359 2360 2361 2362 2363 2364 2365 2366 2367 2368 2369 2370 2371 2372 2373 2374 2375 2376 2377 2378 2379 2380 2381 2382 2383 2384 2385 2386 2387 2388 2389 2390 2391 2392 2393 2394 2395 2396 2397 2398 2399 2400 2401 2402 2403 2404 2405 2406 2407 2408 2409 2410 2411 2412 2413 2414 2415 2416 2417 2418 2419 2420 2421 2422 2423 2424 2425 2426 2427 2428 2429 2430 2431 2432 2433 2434 2435 2436 2437 2438 2439 2440 2441 2442 2443 2444 2445 2446 2447 2448 2449 2450 2451 2452 2453 2454 2455 2456 2457 2458 2459 2460 2461 2462 2463 2464 2465 2466 2467 2468 2469 2470 2471 2472 2473 2474 2475 2476 2477 2478 2479 2480 2481 2482 2483 2484 2485 2486 2487 2488 2489 2490 2491 2492 2493 2494 2495 2496 2497 2498 2499 2500 2501 2502 2503 2504 2505 2506 2507 2508 2509 2510 2511 2512 2513 2514 2515 2516 2517 2518 2519 2520 2521 2522 2523 2524 2525 2526 2527 2528 2529 2530 2531 2532 2533 2534 2535 2536 2537 2538 2539 2540 2541 2542 2543 2544 2545 2546 2547 2548 2549 2550 2551 2552 2553 2554 2555 2556 2557 2558 2559 2560 2561 2562 2563 2564 2565 2566 2567 2568 2569 2570 2571 2572 2573 2574 2575 2576 2577 2578 2579 2580 2581 2582 2583 2584 2585 2586 2587 2588 2589 2590 2591 2592 2593 2594 2595 2596 2597 2598 2599 2600 2601 2602 2603 2604 2605 2606 2607 2608 2609 2610 2611 2612 2613 2614 2615 2616 2617 2618 2619 2620 2621 2622 2623 2624 2625 2626 2627 2628 2629 2630 2631 2632 2633 2634 2635 2636 2637 2638 2639 2640 2641 2642 2643 2644 2645 2646 2647 2648 2649 2650 2651 2652 2653 2654 2655 2656 2657 2658 2659 2660 2661 2662 2663 2664 2665 2666 2667 2668 2669 2670 2671 2672 2673 2674 2675 2676 2677 2678 2679 2680 2681 2682 2683 2684 2685 2686 2687 2688 2689 2690 2691 2692 2693 2694 2695 2696 2697 2698 2699 2700 2701 2702 2703 2704 2705 2706 2707 2708 2709 2710 2711 2712 2713 2714 2715 2716 2717 2718 2719 2720 2721 2722 2723 2724 2725 2726 2727 2728 2729 2730 2731 2732 2733 2734 2735 2736 2737 2738 2739 2740 2741 2742 2743 2744 2745 2746 2747 2748 2749 2750 2751 2752 2753 2754 2755 2756 2757 2758 2759 2760 2761 2762 2763 2764 2765 2766 2767 2768 2769 2770 2771 2772 2773 2774 2775 2776 2777 2778 2779 2780 2781 2782 2783 2784 2785 2786 2787 2788 2789 2790 2791 2792 2793 2794 2795 2796 2797 2798 2799 2800 2801 2802 2803 2804 2805 2806 2807 2808 2809 2810 2811 2812 2813 2814 2815 2816 2817 2818 2819 2820 2821 2822 2823 2824 2825 2826 2827 2828 2829 2830 2831 2832 2833 2834 2835 2836 2837 2838 2839 2840 2841 2842 2843 2844 2845 2846 2847 2848 2849 2850 2851 2852 2853 2854 2855 2856 2857 2858 2859 2860 2861 2862 2863 2864 2865 2866 2867 2868 2869 2870 2871 2872 2873 2874 2875 2876 2877 2878 2879 2880 2881 2882 2883 2884 2885 2886 2887 2888 2889 2890 2891 2892 2893 2894 2895 2896 2897 2898 2899 2900 2901 2902 2903 2904 2905 2906 2907 2908 2909 2910 2911 2912 2913 2914 2915 2916 2917 2918 2919 2920 2921 2922 2923 2924 2925 2926 2927 2928 2929 2930 2931 2932 2933 2934 2935 2936 2937 2938 2939 2940 2941 2942 2943 2944 2945 2946 2947 2948 2949 2950 2951 2952 2953 2954 2955 2956 2957 2958 2959 2960 2961 2962 2963 2964 2965 2966 2967 2968 2969 2970 2971 2972 2973 2974 2975 2976 2977 2978 2979 2980 2981 2982 2983 2984 2985 2986 2987 2988 2989 2990 2991 2992 2993 2994 2995 2996 2997 2998 2999 3000 3001 3002 3003 3004 3005 3006 3007 3008 3009 3010 3011 3012 3013 3014 3015 3016 3017 3018 3019 3020 3021 3022 3023 3024 3025 3026 3027 3028 3029 3030 3031 3032 3033 3034 3035 3036 3037 3038 3039 3040 3041 3042 3043 3044 3045 3046 3047 3048 3049 3050 3051 3052 3053 3054 3055 3056 3057 3058 3059 3060 3061 3062 3063 3064 3065 3066 3067 3068 3069 3070 3071 3072 3073 3074 3075 3076 3077 3078 3079 3080 3081 3082 3083 3084 3085 3086 3087 3088 3089 3090 3091 3092 3093 3094 3095 3096 3097 3098 3099 3100 3101 3102 3103 3104 3105 3106 3107 3108 3109 3110 3111 3112 3113 3114 3115 3116 3117 3118 3119 3120 3121 3122 3123 3124 3125 3126 3127 3128 3129 3130 3131 3132 3133 3134 3135 3136 3137 3138 3139 3140 3141 3142 3143 3144 3145 3146 3147 3148 3149 3150 3151 3152 3153 3154 3155 3156 3157 3158 3159 3160 3161 3162 3163 3164 3165 3166 3167 3168 3169 3170 3171 3172 3173 3174 3175 3176 3177 3178 3179 3180 3181 3182 3183 3184 3185 3186 3187 3188 3189 3190 3191 3192 3193 3194 3195 3196 3197 3198 3199 3200 3201 3202 3203 3204 3205 3206 3207 3208 3209 3210 3211 3212 3213 3214 3215 3216 3217 3218 3219 3220 3221 3222 3223 3224 3225 3226 3227 3228 3229 3230 3231 3232 3233 3234 3235 3236 3237 3238 3239 3240 3241 3242 3243 3244 3245 3246 3247 3248 3249 3250 3251 3252 3253 3254 3255 3256 3257 3258 3259 3260 3261 3262 3263 3264 3265 3266 3267 3268 3269 3270 3271 3272 3273 3274 3275 3276 3277 3278 3279 3280 3281 3282 3283 3284 3285 3286 3287 3288 3289 3290 3291 3292 3293 3294 3295 3296 3297 3298 3299 3300 3301 3302 3303 3304 3305 3306 3307 3308 3309 3310 3311 3312 3313 3314 3315 3316 3317 3318 3319 3320 3321 3322 3323 3324 3325 3326 3327 3328 3329 3330 3331 3332 3333 3334 3335 3336 3337 3338 3339 3340 3341 3342 3343 3344 3345 3346 3347 3348 3349 3350 3351 3352 3353 3354 3355 3356 3357 3358 3359 3360 3361 3362 3363 3364 3365 3366 3367 3368 3369 3370 3371 3372 3373 3374 3375 3376 3377 3378 3379 3380 3381 3382 3383 3384 3385 3386 3387 3388 3389 3390 3391 3392 3393 3394 3395 3396 3397 3398 3399 3400 3401 3402 3403 3404 3405 3406 3407 3408 3409 3410 3411 3412 3413 3414 3415 3416 3417 3418 3419 3420 3421 3422 3423 3424 3425 3426 3427 3428 3429 3430 3431 3432 3433 3434 3435 3436 3437 3438 3439 3440 3441 3442 3443 3444 3445 3446 3447 3448 3449 3450 3451 3452 3453 3454 3455 3456 3457 3458 3459 3460 3461 3462 3463 3464 3465 3466 3467 3468 3469 3470 3471 3472 3473 3474 3475 3476 3477 3478 3479 3480 3481 3482 3483 3484 3485 3486 3487 3488 3489 3490 3491 3492 3493 3494 3495 3496 3497 3498 3499 3500 3501 3502 3503 3504 3505 3506 3507 3508 3509 3510 3511 3512 3513 3514 3515 3516 3517 3518 3519 3520 3521 3522 3523 3524 3525 3526 3527 3528 3529 3530 3531 3532 3533 3534 3535 3536 3537 3538 3539 3540 3541 3542 3543 3544 3545 3546 3547 3548 3549 3550 3551 3552 3553 3554 3555 3556 3557 3558 3559 3560 3561 3562 3563 3564 3565 3566 3567 3568 3569 3570 3571 3572 3573 3574 3575 3576 3577 3578 3579 3580 3581 3582 3583 3584 3585 3586 3587 3588 3589 3590 3591 3592 3593 3594 3595 3596 3597 3598 3599 3600 3601 3602 3603 3604 3605 3606 3607 3608 3609 3610 3611 3612 3613 3614 3615 3616 3617 3618 3619 3620 3621 3622 3623 3624 3625 3626 3627 3628 3629 3630 3631 3632 3633 3634 3635 3636 3637 3638 3639 3640 3641 3642 3643 3644 3645 3646 3647 3648 3649 3650 3651 3652 3653 3654 3655 3656 3657 3658 3659 3660 3661 3662 3663 3664 3665 3666 3667 3668 3669 3670 3671 3672 3673 3674 3675 3676 3677 3678 3679 3680 3681 3682 3683 3684 3685 3686 3687 3688 3689 3690 3691 3692 3693 3694 3695 3696 3697 3698 3699 3700 3701 3702 3703 3704 3705 3706 3707 3708 3709 3710 3711 3712 3713 3714 3715 3716 3717 3718 3719 3720 3721 3722 3723 3724 3725 3726 3727 3728 3729 3730 3731 3732 3733 3734 3735 3736 3737 3738 3739 3740 3741 3742 3743 3744 3745 3746 3747 3748 3749 3750 3751 3752 3753 3754 3755 3756 3757 3758 3759 3760 3761 3762 3763 3764 3765 3766 3767 3768 3769 3770 3771 3772 3773 3774 3775 3776 3777 3778 3779 3780 3781 3782 3783 3784 3785 3786 3787 3788 3789 3790 3791 3792 3793 3794 3795 3796 3797 3798 3799 3800 3801 3802 3803 3804 3805 3806 3807 3808 3809 3810 3811 3812 3813 3814 3815 3816 3817 3818 3819 3820 3821 3822 3823 3824 3825 3826 3827 3828 3829 3830 3831 3832 3833 3834 3835 3836 3837 3838 3839 3840 3841 3842 3843 3844 3845 3846 3847 3848 3849 3850 3851 3852 3853 3854 3855 3856 3857 3858 3859 3860 3861 3862 3863 3864 3865 3866 3867 3868 3869 3870 3871 3872 3873 3874 3875 3876 3877 3878 3879 3880 3881 3882 3883 3884 3885 3886 3887 3888 3889 3890 3891 3892 3893 3894 3895 3896 3897 3898 3899 3900 3901 3902 3903 3904 3905 3906 3907 3908 3909 3910 3911 3912 3913 3914 3915 3916 3917 3918 3919 3920 3921 3922 3923 3924 3925 3926 3927 3928 3929 3930 3931 3932 3933 3934 3935 3936 3937 3938 3939 3940 3941 3942 3943 3944 3945 3946 3947 3948 3949 3950 3951 3952 3953 3954 3955 3956 3957 3958 3959 3960 3961 3962 3963 3964 3965 3966 3967 3968 3969 3970 3971 3972 3973 3974 3975 3976 3977 3978 3979 3980 3981 3982 3983 3984 3985 3986 3987 3988 3989 3990 3991 3992 3993 3994 3995 3996 3997 3998 3999 4000 4001 4002 4003 4004 4005 4006 4007 4008 4009 4010 4011 4012 4013 4014 4015 4016 4017 4018 4019 4020 4021 4022 4023 4024 4025 4026 4027 4028 4029 4030 4031 4032 4033 4034 4035 4036 4037 4038 4039 4040 4041 4042 4043 4044 4045 4046 4047 4048 4049 4050 4051 4052 4053 4054 4055 4056 4057 4058 4059 4060 4061 4062 4063 4064 4065 4066 4067 4068 4069 4070 4071 4072 4073 4074 4075 4076 4077 4078 4079 4080 4081 4082 4083 4084 4085 4086 4087 4088 4089 4090 4091 4092 4093 4094 4095 4096 4097 4098 4099 4100 4101 4102 4103 4104 4105 4106 4107 4108 4109 4110 4111 4112 4113 4114 4115 4116 4117 4118 4119 4120 4121 4122 4123 4124 4125 4126 4127 4128 4129 4130 4131 4132 4133 4134 4135 4136 4137 4138 4139 4140 4141 4142 4143 4144 4145 4146 4147 4148 4149 4150 4151 4152 4153 4154 4155 4156 4157 4158 4159 4160 4161 4162 4163 4164 4165 4166 4167 4168 4169 4170 4171 4172 4173 4174 4175 4176 4177 4178 4179 4180 4181 4182 4183 4184 4185 4186 4187 4188 4189 4190 4191 4192 4193 4194 4195 4196 4197 4198 4199 4200 4201 4202 4203 4204 4205 4206 4207 4208 4209 4210 4211 4212 4213 4214 4215 4216 4217 4218 4219 4220 4221 4222 4223 4224 4225 4226 4227 4228 4229 4230 4231 4232 4233 4234 4235 4236 4237 4238 4239 4240 4241 4242 4243 4244 4245 4246 4247 4248 4249 4250 4251 4252 4253 4254 4255 4256 4257 4258 4259 4260 4261 4262 4263 4264 4265 4266 4267 4268 4269 4270 4271 4272 4273 4274 4275 4276 4277 4278 4279 4280 4281 4282 4283 4284 4285 4286 4287 4288 4289 4290 4291 4292 4293 4294 4295 4296 4297 4298 4299 4300 4301 4302 4303 4304 4305 4306 4307 4308 4309 4310 4311 4312 4313 4314 4315 4316 4317 4318 4319 4320 4321 4322 4323 4324 4325 4326 4327 4328 4329 4330 4331 4332 4333 4334 4335 4336 4337 4338 4339 4340 4341 4342 4343 4344 4345 4346 4347 4348 4349 4350 4351 4352 4353 4354 4355 4356 4357 4358 4359 4360 4361 4362 4363 4364 4365 4366 4367 4368 4369 4370 4371 4372 4373 4374 4375 4376 4377 4378 4379 4380 4381 4382 4383 4384 4385 4386 4387 4388 4389 4390 4391 4392 4393 4394 4395 4396 4397 4398 4399 4400 4401 4402 4403 4404 4405 4406 4407 4408 4409 4410 4411 4412 4413 4414 4415 4416 4417 4418 4419 4420 4421 4422 4423 4424 4425 4426 4427 4428 4429 4430 4431 4432 4433 4434 4435 4436 4437 4438 4439 4440 4441 4442 4443 4444 4445 4446 4447 4448 4449 4450 4451 4452 4453 4454 4455 4456 4457 4458 4459 4460 4461 4462 4463 4464 4465 4466 4467 4468 4469 4470 4471 4472 4473 4474 4475 4476 4477 4478 4479 4480 4481 4482 4483 4484 4485 4486 4487 4488 4489 4490 4491 4492 4493 4494 4495 4496 4497 4498 4499 4500 4501 4502 4503 4504 4505 4506 4507 4508 4509 4510 4511 4512 4513 4514 4515 4516 4517 4518 4519 4520 4521 4522 4523 4524 4525 4526 4527 4528 4529 4530 4531 4532 4533 4534 4535 4536 4537 4538 4539 4540 4541 4542 4543 4544 4545 4546 4547 4548 4549 4550 4551 4552 4553 4554 4555 4556 4557 4558 4559 4560 4561 4562 4563 4564 4565 4566 4567 4568 4569 4570 4571 4572 4573 4574 4575 4576 4577 4578 4579 4580 4581 4582 4583 4584 4585 4586 4587 4588 4589 4590 4591 4592 4593 4594 4595 4596 4597 4598 4599 4600 4601 4602 4603 4604 4605 4606 4607 4608 4609 4610 4611 4612 4613 4614 4615 4616 4617 4618 4619 4620 4621 4622 4623 4624 4625 4626 4627 4628 4629 4630 4631 4632 4633 4634 4635 4636 4637 4638 4639 4640 4641 4642 4643 4644 4645 4646 4647 4648 4649 4650 4651 4652 4653 4654 4655 4656 4657 4658 4659 4660 4661 4662 4663 4664 4665 4666 4667 4668 4669 4670 4671 4672 4673 4674 4675 4676 4677 4678 4679 4680 4681 4682 4683 4684 4685 4686 4687 4688 4689 4690 4691 4692 4693 4694 4695 4696 4697 4698 4699 4700 4701 4702 4703 4704 4705 4706 4707 4708 4709 4710 4711 4712 4713 4714 4715 4716 4717 4718 4719 4720 4721 4722 4723 4724 4725 4726 4727 4728 4729 4730 4731 4732 4733 4734 4735 4736 4737 4738 4739 4740 4741 4742 4743 4744 4745 4746 4747 4748 4749 4750 4751 4752 4753 4754 4755 4756 4757 4758 4759 4760 4761 4762 4763 4764 4765 4766 4767 4768 4769 4770 4771 4772 4773 4774 4775 4776 4777 4778 4779 4780 4781 4782 4783 4784 4785 4786 4787 4788 4789 4790 4791 4792 4793 4794 4795 4796 4797 4798 4799 4800 4801 4802 4803 4804 4805 4806 4807 4808 4809 4810 4811 4812 4813 4814 4815 4816 4817 4818 4819 4820 4821 4822 4823 4824 4825 4826 4827 4828 4829 4830 4831 4832 4833 4834 4835 4836 4837 4838 4839 4840 4841 4842 4843 4844 4845 4846 4847 4848 4849 4850 4851 4852 4853 4854 4855 4856 4857 4858 4859 4860 4861 4862 4863 4864 4865 4866 4867 4868 4869 4870 4871 4872 4873 4874 4875 4876 4877 4878 4879 4880 4881 4882 4883 4884 4885 4886 4887 4888 4889 4890 4891 4892 4893 4894 4895 4896 4897 4898 4899 4900 4901 4902 4903 4904 4905 4906 4907 4908 4909 4910 4911 4912 4913 4914 4915 4916 4917 4918 4919 4920 4921 4922 4923 4924 4925 4926 4927 4928 4929 4930 4931 4932 4933 4934 4935 4936 4937 4938 4939 4940 4941 4942 4943 4944 4945 4946 4947 4948 4949 4950 4951 4952 4953 4954 4955 4956 4957 4958 4959 4960 4961 4962 4963 4964 4965 4966 4967 4968 4969 4970 4971 4972 4973 4974 4975 4976 4977 4978 4979 4980 4981 4982 4983 4984 4985 4986 4987 4988 4989 4990 4991 4992 4993 4994 4995 4996 4997 4998 4999 5000 5001 5002 5003 5004 5005 5006 5007 5008 5009 5010 5011 5012 5013 5014 5015 5016 5017 5018 5019 5020 5021 5022 5023 5024 5025 5026 5027 5028 5029 5030 5031 5032 5033 5034 5035 5036 5037 5038 5039 5040 5041 5042 5043 5044 5045 5046 5047 5048 5049 5050 5051 5052 5053 5054 5055 5056 5057 5058 5059 5060 5061 5062 5063 5064 5065 5066 5067 5068 5069 5070 5071 5072 5073 5074 5075 5076 5077 5078 5079 5080 5081 5082 5083 5084 5085 5086 5087 5088 5089 5090 5091 5092 5093 5094 5095 5096 5097 5098 5099 5100 5101 5102 5103 5104 5105 5106 5107 5108 5109 5110 5111 5112 5113 5114 5115 5116 5117 5118 5119 5120 5121 5122 5123 5124 5125 5126 5127 5128 5129 5130 5131 5132 5133 5134 5135 5136 5137 5138 5139 5140 5141 5142 5143 5144 5145 5146 5147 5148 5149 5150 5151 5152 5153 5154 5155 5156 5157 5158 5159 5160 5161 5162 5163 5164 5165 5166 5167 5168 5169 5170 5171 5172 5173 5174 5175 5176 5177 5178 5179 5180 5181 5182 5183 5184 5185 5186 5187 5188 5189 5190 5191 5192 5193 5194 5195 5196 5197 5198 5199 5200 5201 5202 5203 5204 5205 5206 5207 5208 5209 5210 5211 5212 5213 5214 5215 5216 5217 5218 5219 5220 5221 5222 5223 5224 5225 5226 5227 5228 5229 5230 5231 5232 5233 5234 5235 5236 5237 5238 5239 5240 5241 5242 5243 5244 5245 5246 5247 5248 5249 5250 5251 5252 5253 5254 5255 5256 5257 5258 5259 5260 5261 5262 5263 5264 5265 5266 5267 5268 5269 5270 5271 5272 5273 5274 5275 5276 5277 5278 5279 5280 5281 5282 5283 5284 5285 5286 5287 5288 5289 5290 5291 5292 5293 5294 5295 5296 5297 5298 5299 5300 5301 5302 5303 5304 5305 5306 5307 5308 5309 5310 5311 5312 5313 5314 5315 5316 5317 5318 5319 5320 5321 5322 5323 5324 5325 5326 5327 5328 5329 5330 5331 5332 5333 5334 5335 5336 5337 5338 5339 5340 5341 5342 5343 5344 5345 5346 5347 5348 5349 5350 5351 5352 5353 5354 5355 5356 5357 5358 5359 5360 5361 5362 5363 5364 5365 5366 5367 5368 5369 5370 5371 5372 5373 5374 5375 5376 5377 5378 5379 5380 5381 5382 5383 5384 5385 5386 5387 5388 5389 5390 5391 5392 5393 5394 5395 5396 5397 5398 5399 5400 5401 5402 5403 5404 5405 5406 5407 5408 5409 5410 5411 5412 5413 5414 5415 5416 5417 5418 5419 5420 5421 5422 5423 5424 5425 5426 5427 5428 5429 5430 5431 5432 5433 5434 5435 5436 5437 5438 5439 5440 5441 5442 5443 5444 5445 5446 5447 5448 5449 5450 5451 5452 5453 5454 5455 5456 5457 5458 5459 5460 5461 5462 5463 5464 5465 5466 5467 5468 5469 5470 5471 5472 5473 5474 5475 5476 5477 5478 5479 5480 5481 5482 5483 5484 5485 5486 5487 5488 5489 5490 5491 5492 5493 5494 5495 5496 5497 5498 5499 5500 5501 5502 5503 5504 5505 5506 5507 5508 5509 5510 5511 5512 5513 5514 5515 5516 5517 5518 5519 5520 5521 5522 5523 5524 5525 5526 5527 5528 5529 5530 5531 5532 5533 5534 5535 5536 5537 5538 5539 5540 5541 5542 5543 5544 5545 5546 5547 5548 5549 5550 5551 5552 5553 5554 5555 5556 5557 5558 5559 5560 5561 5562 5563 5564 5565 5566 5567 5568 5569 5570 5571 5572 5573 5574 5575 5576 5577 5578 5579 5580 5581 5582 5583 5584 5585 5586 5587 5588 5589 5590 5591 5592 5593 5594 5595 5596 5597 5598 5599 5600 5601 5602 5603 5604 5605 5606 5607 5608 5609 5610 5611 5612 5613 5614 5615 5616 5617 5618 5619 5620 5621 5622 5623 5624 5625 5626 5627 5628 5629 5630 5631 5632 5633 5634 5635 5636 5637 5638 5639 5640 5641 5642 5643 5644 5645 5646 5647 5648 5649 5650 5651 5652 5653 5654 5655 5656 5657 5658 5659 5660 5661 5662 5663 5664 5665 5666 5667 5668 5669 5670 5671 5672 5673 5674 5675 5676 5677 5678 5679 5680 5681 5682 5683 5684 5685 5686 5687 5688 5689 5690 5691 5692 5693 5694 5695 5696 5697 5698 5699 5700 5701 5702 5703 5704 5705 5706 5707 5708 5709 5710 5711 5712 5713 5714 5715 5716 5717 5718 5719 5720 5721 5722 5723 5724 5725 5726 5727 5728 5729 5730 5731 5732 5733 5734 5735 5736 5737 5738 5739 5740 5741 5742 5743 5744 5745 5746 5747 5748 5749 5750 5751 5752 5753 5754 5755 5756 5757 5758 5759 5760 5761 5762 5763 5764 5765 5766 5767 5768 5769 5770 5771 5772 5773 5774 5775 5776 5777 5778 5779 5780 5781 5782 5783 5784 5785 5786 5787 5788 5789 5790 5791 5792 5793 5794 5795 5796 5797 5798 5799 5800 5801 5802 5803 5804 5805 5806 5807 5808 5809 5810 5811 5812 5813 5814 5815 5816 5817 5818 5819 5820 5821 5822 5823 5824 5825 5826 5827 5828 5829 5830 5831 5832 5833 5834 5835 5836 5837 5838 5839 5840 5841 5842 5843 5844 5845 5846 5847 5848 5849 5850 5851 5852 5853 5854 5855 5856 5857 5858 5859 5860 5861 5862 5863 5864 5865 5866 5867 5868 5869 5870 5871 5872 5873 5874 5875 5876 5877 5878 5879 5880 5881 5882 5883 5884 5885 5886 5887 5888 5889 5890 5891 5892 5893 5894 5895 5896 5897 5898 5899 5900 5901 5902 5903 5904 5905 5906 5907 5908 5909 5910 5911 5912 5913 5914 5915 5916 5917 5918 5919 5920 5921 5922 5923 5924 5925 5926 5927 5928 5929 5930 5931 5932 5933 5934 5935 5936 5937 5938 5939 5940 5941 5942 5943 5944 5945 5946 5947 5948 5949 5950 5951 5952 5953 5954 5955 5956 5957 5958 5959 5960 5961 5962 5963 5964 5965 5966 5967 5968 5969 5970 5971 5972 5973 5974 5975 5976 5977 5978 5979 5980 5981 5982 5983 5984 5985 5986 5987 5988 5989 5990 5991 5992 5993 5994 5995 5996 5997 5998 5999 6000 6001 6002 6003 6004 6005 6006 6007 6008 6009 6010 6011 6012 6013 6014 6015 6016 6017 6018 6019 6020 6021 6022 6023 6024 6025 6026 6027 6028 6029 6030 6031 6032 6033 6034 6035 6036 6037 6038 6039 6040 6041 6042 6043 6044 6045 6046 6047 6048 6049 6050 6051 6052 6053 6054 6055 6056 6057 6058 6059 6060 6061 6062 6063 6064 6065 6066 6067 6068 6069 6070 6071 6072 6073 6074 6075 6076 6077 6078 6079 6080 6081 6082 6083 6084 6085 6086 6087 6088 6089 6090 6091 6092 6093 6094 6095 6096 6097 6098 6099 6100 6101 6102 6103 6104 6105 6106 6107 6108 6109 6110 6111 6112 6113 6114 6115 6116 6117 6118 6119 6120 6121 6122 6123 6124 6125 6126 6127 6128 6129 6130 6131 6132 6133 6134 6135 6136 6137 6138 6139 6140 6141 6142 6143 6144 6145 6146 6147 6148 6149 6150 6151 6152 6153 6154 6155 6156 6157 6158 6159 6160 6161 6162 6163 6164 6165 6166 6167 6168 6169 6170 6171 6172 6173 6174 6175 6176 6177 6178 6179 6180 6181 6182 6183 6184 6185 6186 6187 6188 6189 6190 6191 6192 6193 6194 6195 6196 6197 6198 6199 6200 6201 6202 6203 6204 6205 6206 6207 6208 6209 6210 6211 6212 6213 6214 6215 6216 6217 6218 6219 6220 6221 6222 6223 6224 6225 6226 6227 6228 6229 6230 6231 6232 6233 6234 6235 6236 6237 6238 6239 6240 6241 6242 6243 6244 6245 6246 6247 6248 6249 6250 6251 6252 6253 6254 6255 6256 6257 6258 6259 6260 6261 6262 6263 6264 6265 6266 6267 6268 6269 6270 6271 6272 6273 6274 6275 6276 6277 6278 6279 6280 6281 6282 6283 6284 6285 6286 6287 6288 6289 6290 6291 6292 6293 6294 6295 6296 6297 6298 6299 6300 6301 6302 6303 6304 6305 6306 6307 6308 6309 6310 6311 6312 6313 6314 6315 6316 6317 6318 6319 6320 6321 6322 6323 6324 6325 6326 6327 6328 6329 6330 6331 6332 6333 6334 6335 6336 6337 6338 6339 6340 6341 6342 6343 6344 6345 6346 6347 6348 6349 6350 6351 6352 6353 6354 6355 6356 6357 6358 6359 6360 6361 6362 6363 6364 6365 6366 6367 6368 6369 6370 6371 6372 6373 6374 6375 6376 6377 6378 6379 6380 6381 6382 6383 6384 6385 6386 6387 6388 6389 6390 6391 6392 6393 6394 6395 6396 6397 6398 6399 6400 6401 6402 6403 6404 6405 6406 6407 6408 6409 6410 6411 6412 6413 6414 6415 6416 6417 6418 6419 6420 6421 6422 6423 6424 6425 6426 6427 6428 6429 6430 6431 6432 6433 6434 6435 6436 6437 6438 6439 6440 6441 6442 6443 6444 6445 6446 6447 6448 6449 6450 6451 6452 6453 6454 6455 6456 6457 6458 6459 6460 6461 6462 6463 6464 6465 6466 6467 6468 6469 6470 6471 6472 6473 6474 6475 6476 6477 6478 6479 6480 6481 6482 6483 6484 6485 6486 6487 6488 6489 6490 6491 6492 6493 6494 6495 6496 6497 6498 6499 6500 6501 6502 6503 6504 6505 6506 6507 6508 6509 6510 6511 6512 6513 6514 6515 6516 6517 6518 6519 6520 6521 6522 6523 6524 6525 6526 6527 6528 6529 6530 6531 6532 6533 6534 6535 6536 6537 6538 6539 6540 6541 6542 6543 6544 6545 6546 6547 6548 6549 6550 6551 6552 6553 6554 6555 6556 6557 6558 6559 6560 6561 6562 6563 6564 6565 6566 6567 6568 6569 6570 6571 6572 6573 6574 6575 6576 6577 6578 6579 6580 6581 6582 6583 6584 6585 6586 6587 6588 6589 6590 6591 6592 6593 6594 6595 6596 6597 6598 6599 6600 6601 6602 6603 6604 6605 6606 6607 6608 6609 6610 6611 6612 6613 6614 6615 6616 6617 6618 6619 6620 6621 6622 6623 6624 6625 6626 6627 6628 6629 6630 6631 6632 6633 6634 6635 6636 6637 6638 6639 6640 6641 6642 6643 6644 6645 6646 6647 6648 6649 6650 6651 6652 6653 6654 6655 6656 6657 6658 6659 6660 6661 6662 6663 6664 6665 6666 6667 6668 6669 6670 6671 6672 6673 6674 6675 6676 6677 6678 6679 6680 6681 6682 6683 6684 6685 6686 6687 6688 6689 6690 6691 6692 6693 6694 6695 6696 6697 6698 6699 6700 6701 6702 6703 6704 6705 6706 6707 6708 6709 6710 6711 6712 6713 6714 6715 6716 6717 6718 6719 6720 6721 6722 6723 6724 6725 6726 6727 6728 6729 6730 6731 6732 6733 6734 6735 6736 6737 6738 6739 6740 6741 6742 6743 6744 6745 6746 6747 6748 6749 6750 6751 6752 6753 6754 6755 6756 6757 6758 6759 6760 6761 6762 6763 6764 6765 6766 6767 6768 6769 6770 6771 6772 6773 6774 6775 6776 6777 6778 6779 6780 6781 6782 6783 6784 6785 6786 6787 6788 6789 6790 6791 6792 6793 6794 6795 6796 6797 6798 6799 6800 6801 6802 6803 6804 6805 6806 6807 6808 6809 6810 6811 6812 6813 6814 6815 6816 6817 6818 6819 6820 6821 6822 6823 6824 6825 6826 6827 6828 6829 6830 6831 6832 6833 6834 6835 6836 6837 6838 6839 6840 6841 6842 6843 6844 6845 6846 6847 6848 6849 6850 6851 6852 6853 6854 6855 6856 6857 6858 6859 6860 6861 6862 6863 6864 6865 6866 6867 6868 6869 6870 6871 6872 6873 6874 6875 6876 6877 6878 6879 6880 6881 6882 6883 6884 6885 6886 6887 6888 6889 6890 6891 6892 6893 6894 6895 6896 6897 6898 6899 6900 6901 6902 6903 6904 6905 6906 6907 6908 6909 6910 6911 6912 6913 6914 6915 6916 6917 6918 6919 6920 6921 6922 6923 6924 6925 6926 6927 6928 6929 6930 6931 6932 6933 6934 6935 6936 6937 6938 6939 6940 6941 6942 6943 6944 6945 6946 6947 6948 6949 6950 6951 6952 6953 6954 6955 6956 6957 6958 6959 6960 6961 6962 6963 6964 6965 6966 6967 6968 6969 6970 6971 6972 6973 6974 6975 6976 6977 6978 6979 6980 6981 6982 6983 6984 6985 6986 6987 6988 6989 6990 6991 6992 6993 6994 6995 6996 6997 6998 6999 7000 7001 7002 7003 7004 7005 7006 7007 7008 7009 7010 7011 7012 7013 7014 7015 7016 7017 7018 7019 7020 7021 7022 7023 7024 7025 7026 7027 7028 7029 7030 7031 7032 7033 7034 7035 7036 7037 7038 7039 7040 7041 7042 7043 7044 7045 7046 7047 7048 7049 7050 7051 7052 7053 7054 7055 7056 7057 7058 7059 7060 7061 7062 7063 7064 7065 7066 7067 7068 7069 7070 7071 7072 7073 7074 7075 7076 7077 7078 7079 7080 7081 7082 7083 7084 7085 7086 7087 7088 7089 7090 7091 7092 7093 7094 7095 7096 7097 7098 7099 7100 7101 7102 7103 7104 7105 7106 7107 7108 7109 7110 7111 7112 7113 7114 7115 7116 7117 7118 7119 7120 7121 7122 7123 7124 7125 7126 7127 7128 7129 7130 7131 7132 7133 7134 7135 7136 7137 7138 7139 7140 7141 7142 7143 7144 7145 7146 7147 7148 7149 7150 7151 7152 7153 7154 7155 7156 7157 7158 7159 7160 7161 7162 7163 7164 7165 7166 7167 7168 7169 7170 7171 7172 7173 7174 7175 7176 7177 7178 7179 7180 7181 7182 7183 7184 7185 7186 7187 7188 7189 7190 7191 7192 7193 7194 7195 7196 7197 7198 7199 7200 7201 7202 7203 7204 7205 7206 7207 7208 7209 7210 7211 7212 7213 7214 7215 7216 7217 7218 7219 7220 7221 7222 7223 7224 7225 7226 7227 7228 7229 7230 7231 7232 7233 7234 7235 7236 7237 7238 7239 7240 7241 7242 7243 7244 7245 7246 7247 7248 7249 7250 7251 7252 7253 7254 7255 7256 7257 7258 7259 7260 7261 7262 7263 7264 7265 7266 7267 7268 7269 7270 7271 7272 7273 7274 7275 7276 7277 7278 7279 7280 7281 7282 7283 7284 7285 7286 7287 7288 7289 7290 7291 7292 7293 7294 7295 7296 7297 7298 7299 7300 7301 7302 7303 7304 7305 7306 7307 7308 7309 7310 7311 7312 7313 7314 7315 7316 7317 7318 7319 7320 7321 7322 7323 7324 7325 7326 7327 7328 7329 7330 7331 7332 7333 7334 7335 7336 7337 7338 7339 7340 7341 7342 7343 7344 7345 7346 7347 7348 7349 7350 7351 7352 7353 7354 7355 7356 7357 7358 7359 7360 7361 7362 7363 7364 7365 7366 7367 7368 7369 7370 7371 7372 7373 7374 7375 7376 7377 7378 7379 7380 7381 7382 7383 7384 7385 7386 7387 7388 7389 7390 7391 7392 7393 7394 7395 7396 7397 7398 7399 7400 7401 7402 7403 7404 7405 | /******************************************************************* * This file is part of the Emulex Linux Device Driver for * * Fibre Channel Host Bus Adapters. * * Copyright (C) 2017-2024 Broadcom. All Rights Reserved. The term * * “Broadcom” refers to Broadcom Inc. and/or its subsidiaries. * * Copyright (C) 2004-2016 Emulex. All rights reserved. * * EMULEX and SLI are trademarks of Emulex. * * www.broadcom.com * * Portions Copyright (C) 2004-2005 Christoph Hellwig * * * * This program is free software; you can redistribute it and/or * * modify it under the terms of version 2 of the GNU General * * Public License as published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful. * * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND * * WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, * * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE * * DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD * * TO BE LEGALLY INVALID. See the GNU General Public License for * * more details, a copy of which can be found in the file COPYING * * included with this package. * *******************************************************************/ #include <linux/ctype.h> #include <linux/delay.h> #include <linux/pci.h> #include <linux/interrupt.h> #include <linux/module.h> #include <linux/aer.h> #include <linux/gfp.h> #include <linux/kernel.h> #include <scsi/scsi.h> #include <scsi/scsi_device.h> #include <scsi/scsi_host.h> #include <scsi/scsi_tcq.h> #include <scsi/scsi_transport_fc.h> #include <scsi/fc/fc_fs.h> #include "lpfc_hw4.h" #include "lpfc_hw.h" #include "lpfc_sli.h" #include "lpfc_sli4.h" #include "lpfc_nl.h" #include "lpfc_disc.h" #include "lpfc.h" #include "lpfc_scsi.h" #include "lpfc_nvme.h" #include "lpfc_logmsg.h" #include "lpfc_version.h" #include "lpfc_compat.h" #include "lpfc_crtn.h" #include "lpfc_vport.h" #include "lpfc_attr.h" #define LPFC_DEF_DEVLOSS_TMO 30 #define LPFC_MIN_DEVLOSS_TMO 1 #define LPFC_MAX_DEVLOSS_TMO 255 #define LPFC_MAX_INFO_TMP_LEN 100 #define LPFC_INFO_MORE_STR "\nCould be more info...\n" /* * Write key size should be multiple of 4. If write key is changed * make sure that library write key is also changed. */ #define LPFC_REG_WRITE_KEY_SIZE 4 #define LPFC_REG_WRITE_KEY "EMLX" const char *const trunk_errmsg[] = { /* map errcode */ "", /* There is no such error code at index 0*/ "link negotiated speed does not match existing" " trunk - link was \"low\" speed", "link negotiated speed does not match" " existing trunk - link was \"middle\" speed", "link negotiated speed does not match existing" " trunk - link was \"high\" speed", "Attached to non-trunking port - F_Port", "Attached to non-trunking port - N_Port", "FLOGI response timeout", "non-FLOGI frame received", "Invalid FLOGI response", "Trunking initialization protocol", "Trunk peer device mismatch", }; /** * lpfc_jedec_to_ascii - Hex to ascii convertor according to JEDEC rules * @incr: integer to convert. * @hdw: ascii string holding converted integer plus a string terminator. * * Description: * JEDEC Joint Electron Device Engineering Council. * Convert a 32 bit integer composed of 8 nibbles into an 8 byte ascii * character string. The string is then terminated with a NULL in byte 9. * Hex 0-9 becomes ascii '0' to '9'. * Hex a-f becomes ascii '=' to 'B' capital B. * * Notes: * Coded for 32 bit integers only. **/ static void lpfc_jedec_to_ascii(int incr, char hdw[]) { int i, j; for (i = 0; i < 8; i++) { j = (incr & 0xf); if (j <= 9) hdw[7 - i] = 0x30 + j; else hdw[7 - i] = 0x61 + j - 10; incr = (incr >> 4); } hdw[8] = 0; return; } static ssize_t lpfc_cmf_info_show(struct device *dev, struct device_attribute *attr, char *buf) { struct Scsi_Host *shost = class_to_shost(dev); struct lpfc_vport *vport = (struct lpfc_vport *)shost->hostdata; struct lpfc_hba *phba = vport->phba; struct lpfc_cgn_info *cp = NULL; struct lpfc_cgn_stat *cgs; int len = 0; int cpu; u64 rcv, total; char tmp[LPFC_MAX_INFO_TMP_LEN] = {0}; if (phba->cgn_i) cp = (struct lpfc_cgn_info *)phba->cgn_i->virt; scnprintf(tmp, sizeof(tmp), "Congestion Mgmt Info: E2Eattr %d Ver %d " "CMF %d cnt %d\n", phba->sli4_hba.pc_sli4_params.mi_cap, cp ? cp->cgn_info_version : 0, phba->sli4_hba.pc_sli4_params.cmf, phba->cmf_timer_cnt); if (strlcat(buf, tmp, PAGE_SIZE) >= PAGE_SIZE) goto buffer_done; if (!phba->sli4_hba.pc_sli4_params.cmf) goto buffer_done; switch (phba->cgn_init_reg_signal) { case EDC_CG_SIG_WARN_ONLY: scnprintf(tmp, sizeof(tmp), "Register: Init: Signal:WARN "); break; case EDC_CG_SIG_WARN_ALARM: scnprintf(tmp, sizeof(tmp), "Register: Init: Signal:WARN|ALARM "); break; default: scnprintf(tmp, sizeof(tmp), "Register: Init: Signal:NONE "); break; } if (strlcat(buf, tmp, PAGE_SIZE) >= PAGE_SIZE) goto buffer_done; switch (phba->cgn_init_reg_fpin) { case LPFC_CGN_FPIN_WARN: scnprintf(tmp, sizeof(tmp), "FPIN:WARN\n"); break; case LPFC_CGN_FPIN_ALARM: scnprintf(tmp, sizeof(tmp), "FPIN:ALARM\n"); break; case LPFC_CGN_FPIN_BOTH: scnprintf(tmp, sizeof(tmp), "FPIN:WARN|ALARM\n"); break; default: scnprintf(tmp, sizeof(tmp), "FPIN:NONE\n"); break; } if (strlcat(buf, tmp, PAGE_SIZE) >= PAGE_SIZE) goto buffer_done; switch (phba->cgn_reg_signal) { case EDC_CG_SIG_WARN_ONLY: scnprintf(tmp, sizeof(tmp), " Current: Signal:WARN "); break; case EDC_CG_SIG_WARN_ALARM: scnprintf(tmp, sizeof(tmp), " Current: Signal:WARN|ALARM "); break; default: scnprintf(tmp, sizeof(tmp), " Current: Signal:NONE "); break; } if (strlcat(buf, tmp, PAGE_SIZE) >= PAGE_SIZE) goto buffer_done; switch (phba->cgn_reg_fpin) { case LPFC_CGN_FPIN_WARN: scnprintf(tmp, sizeof(tmp), "FPIN:WARN ACQEcnt:%d\n", phba->cgn_acqe_cnt); break; case LPFC_CGN_FPIN_ALARM: scnprintf(tmp, sizeof(tmp), "FPIN:ALARM ACQEcnt:%d\n", phba->cgn_acqe_cnt); break; case LPFC_CGN_FPIN_BOTH: scnprintf(tmp, sizeof(tmp), "FPIN:WARN|ALARM ACQEcnt:%d\n", phba->cgn_acqe_cnt); break; default: scnprintf(tmp, sizeof(tmp), "FPIN:NONE ACQEcnt:%d\n", phba->cgn_acqe_cnt); break; } if (strlcat(buf, tmp, PAGE_SIZE) >= PAGE_SIZE) goto buffer_done; if (phba->cmf_active_mode != phba->cgn_p.cgn_param_mode) { switch (phba->cmf_active_mode) { case LPFC_CFG_OFF: scnprintf(tmp, sizeof(tmp), "Active: Mode:Off\n"); break; case LPFC_CFG_MANAGED: scnprintf(tmp, sizeof(tmp), "Active: Mode:Managed\n"); break; case LPFC_CFG_MONITOR: scnprintf(tmp, sizeof(tmp), "Active: Mode:Monitor\n"); break; default: scnprintf(tmp, sizeof(tmp), "Active: Mode:Unknown\n"); } if (strlcat(buf, tmp, PAGE_SIZE) >= PAGE_SIZE) goto buffer_done; } switch (phba->cgn_p.cgn_param_mode) { case LPFC_CFG_OFF: scnprintf(tmp, sizeof(tmp), "Config: Mode:Off "); break; case LPFC_CFG_MANAGED: scnprintf(tmp, sizeof(tmp), "Config: Mode:Managed "); break; case LPFC_CFG_MONITOR: scnprintf(tmp, sizeof(tmp), "Config: Mode:Monitor "); break; default: scnprintf(tmp, sizeof(tmp), "Config: Mode:Unknown "); } if (strlcat(buf, tmp, PAGE_SIZE) >= PAGE_SIZE) goto buffer_done; total = 0; rcv = 0; for_each_present_cpu(cpu) { cgs = per_cpu_ptr(phba->cmf_stat, cpu); total += atomic64_read(&cgs->total_bytes); rcv += atomic64_read(&cgs->rcv_bytes); } scnprintf(tmp, sizeof(tmp), "IObusy:%d Info:%d Bytes: Rcv:x%llx Total:x%llx\n", atomic_read(&phba->cmf_busy), phba->cmf_active_info, rcv, total); if (strlcat(buf, tmp, PAGE_SIZE) >= PAGE_SIZE) goto buffer_done; scnprintf(tmp, sizeof(tmp), "Port_speed:%d Link_byte_cnt:%ld " "Max_byte_per_interval:%ld\n", lpfc_sli_port_speed_get(phba), (unsigned long)phba->cmf_link_byte_count, (unsigned long)phba->cmf_max_bytes_per_interval); strlcat(buf, tmp, PAGE_SIZE); buffer_done: len = strnlen(buf, PAGE_SIZE); if (unlikely(len >= (PAGE_SIZE - 1))) { lpfc_printf_log(phba, KERN_INFO, LOG_CGN_MGMT, "6312 Catching potential buffer " "overflow > PAGE_SIZE = %lu bytes\n", PAGE_SIZE); strscpy(buf + PAGE_SIZE - 1 - sizeof(LPFC_INFO_MORE_STR), LPFC_INFO_MORE_STR, sizeof(LPFC_INFO_MORE_STR) + 1); } return len; } /** * lpfc_drvr_version_show - Return the Emulex driver string with version number * @dev: class unused variable. * @attr: device attribute, not used. * @buf: on return contains the module description text. * * Returns: size of formatted string. **/ static ssize_t lpfc_drvr_version_show(struct device *dev, struct device_attribute *attr, char *buf) { return scnprintf(buf, PAGE_SIZE, LPFC_MODULE_DESC "\n"); } /** * lpfc_enable_fip_show - Return the fip mode of the HBA * @dev: class unused variable. * @attr: device attribute, not used. * @buf: on return contains the module description text. * * Returns: size of formatted string. **/ static ssize_t lpfc_enable_fip_show(struct device *dev, struct device_attribute *attr, char *buf) { struct Scsi_Host *shost = class_to_shost(dev); struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata; struct lpfc_hba *phba = vport->phba; if (test_bit(HBA_FIP_SUPPORT, &phba->hba_flag)) return scnprintf(buf, PAGE_SIZE, "1\n"); else return scnprintf(buf, PAGE_SIZE, "0\n"); } static ssize_t lpfc_nvme_info_show(struct device *dev, struct device_attribute *attr, char *buf) { struct Scsi_Host *shost = class_to_shost(dev); struct lpfc_vport *vport = shost_priv(shost); struct lpfc_hba *phba = vport->phba; struct lpfc_nvmet_tgtport *tgtp; struct nvme_fc_local_port *localport; struct lpfc_nvme_lport *lport; struct lpfc_nvme_rport *rport; struct lpfc_nodelist *ndlp; struct nvme_fc_remote_port *nrport; struct lpfc_fc4_ctrl_stat *cstat; uint64_t data1, data2, data3; uint64_t totin, totout, tot; unsigned long iflags; char *statep; int i; int len = 0; char tmp[LPFC_MAX_INFO_TMP_LEN] = {0}; if (!(vport->cfg_enable_fc4_type & LPFC_ENABLE_NVME)) { len = scnprintf(buf, PAGE_SIZE, "NVME Disabled\n"); return len; } if (phba->nvmet_support) { if (!phba->targetport) { len = scnprintf(buf, PAGE_SIZE, "NVME Target: x%llx is not allocated\n", wwn_to_u64(vport->fc_portname.u.wwn)); return len; } /* Port state is only one of two values for now. */ if (phba->targetport->port_id) statep = "REGISTERED"; else statep = "INIT"; scnprintf(tmp, sizeof(tmp), "NVME Target Enabled State %s\n", statep); if (strlcat(buf, tmp, PAGE_SIZE) >= PAGE_SIZE) goto buffer_done; scnprintf(tmp, sizeof(tmp), "%s%d WWPN x%llx WWNN x%llx DID x%06x\n", "NVME Target: lpfc", phba->brd_no, wwn_to_u64(vport->fc_portname.u.wwn), wwn_to_u64(vport->fc_nodename.u.wwn), phba->targetport->port_id); if (strlcat(buf, tmp, PAGE_SIZE) >= PAGE_SIZE) goto buffer_done; if (strlcat(buf, "\nNVME Target: Statistics\n", PAGE_SIZE) >= PAGE_SIZE) goto buffer_done; tgtp = (struct lpfc_nvmet_tgtport *)phba->targetport->private; scnprintf(tmp, sizeof(tmp), "LS: Rcv %08x Drop %08x Abort %08x\n", atomic_read(&tgtp->rcv_ls_req_in), atomic_read(&tgtp->rcv_ls_req_drop), atomic_read(&tgtp->xmt_ls_abort)); if (strlcat(buf, tmp, PAGE_SIZE) >= PAGE_SIZE) goto buffer_done; if (atomic_read(&tgtp->rcv_ls_req_in) != atomic_read(&tgtp->rcv_ls_req_out)) { scnprintf(tmp, sizeof(tmp), "Rcv LS: in %08x != out %08x\n", atomic_read(&tgtp->rcv_ls_req_in), atomic_read(&tgtp->rcv_ls_req_out)); if (strlcat(buf, tmp, PAGE_SIZE) >= PAGE_SIZE) goto buffer_done; } scnprintf(tmp, sizeof(tmp), "LS: Xmt %08x Drop %08x Cmpl %08x\n", atomic_read(&tgtp->xmt_ls_rsp), atomic_read(&tgtp->xmt_ls_drop), atomic_read(&tgtp->xmt_ls_rsp_cmpl)); if (strlcat(buf, tmp, PAGE_SIZE) >= PAGE_SIZE) goto buffer_done; scnprintf(tmp, sizeof(tmp), "LS: RSP Abort %08x xb %08x Err %08x\n", atomic_read(&tgtp->xmt_ls_rsp_aborted), atomic_read(&tgtp->xmt_ls_rsp_xb_set), atomic_read(&tgtp->xmt_ls_rsp_error)); if (strlcat(buf, tmp, PAGE_SIZE) >= PAGE_SIZE) goto buffer_done; scnprintf(tmp, sizeof(tmp), "FCP: Rcv %08x Defer %08x Release %08x " "Drop %08x\n", atomic_read(&tgtp->rcv_fcp_cmd_in), atomic_read(&tgtp->rcv_fcp_cmd_defer), atomic_read(&tgtp->xmt_fcp_release), atomic_read(&tgtp->rcv_fcp_cmd_drop)); if (strlcat(buf, tmp, PAGE_SIZE) >= PAGE_SIZE) goto buffer_done; if (atomic_read(&tgtp->rcv_fcp_cmd_in) != atomic_read(&tgtp->rcv_fcp_cmd_out)) { scnprintf(tmp, sizeof(tmp), "Rcv FCP: in %08x != out %08x\n", atomic_read(&tgtp->rcv_fcp_cmd_in), atomic_read(&tgtp->rcv_fcp_cmd_out)); if (strlcat(buf, tmp, PAGE_SIZE) >= PAGE_SIZE) goto buffer_done; } scnprintf(tmp, sizeof(tmp), "FCP Rsp: RD %08x rsp %08x WR %08x rsp %08x " "drop %08x\n", atomic_read(&tgtp->xmt_fcp_read), atomic_read(&tgtp->xmt_fcp_read_rsp), atomic_read(&tgtp->xmt_fcp_write), atomic_read(&tgtp->xmt_fcp_rsp), atomic_read(&tgtp->xmt_fcp_drop)); if (strlcat(buf, tmp, PAGE_SIZE) >= PAGE_SIZE) goto buffer_done; scnprintf(tmp, sizeof(tmp), "FCP Rsp Cmpl: %08x err %08x drop %08x\n", atomic_read(&tgtp->xmt_fcp_rsp_cmpl), atomic_read(&tgtp->xmt_fcp_rsp_error), atomic_read(&tgtp->xmt_fcp_rsp_drop)); if (strlcat(buf, tmp, PAGE_SIZE) >= PAGE_SIZE) goto buffer_done; scnprintf(tmp, sizeof(tmp), "FCP Rsp Abort: %08x xb %08x xricqe %08x\n", atomic_read(&tgtp->xmt_fcp_rsp_aborted), atomic_read(&tgtp->xmt_fcp_rsp_xb_set), atomic_read(&tgtp->xmt_fcp_xri_abort_cqe)); if (strlcat(buf, tmp, PAGE_SIZE) >= PAGE_SIZE) goto buffer_done; scnprintf(tmp, sizeof(tmp), "ABORT: Xmt %08x Cmpl %08x\n", atomic_read(&tgtp->xmt_fcp_abort), atomic_read(&tgtp->xmt_fcp_abort_cmpl)); if (strlcat(buf, tmp, PAGE_SIZE) >= PAGE_SIZE) goto buffer_done; scnprintf(tmp, sizeof(tmp), "ABORT: Sol %08x Usol %08x Err %08x Cmpl %08x\n", atomic_read(&tgtp->xmt_abort_sol), atomic_read(&tgtp->xmt_abort_unsol), atomic_read(&tgtp->xmt_abort_rsp), atomic_read(&tgtp->xmt_abort_rsp_error)); if (strlcat(buf, tmp, PAGE_SIZE) >= PAGE_SIZE) goto buffer_done; scnprintf(tmp, sizeof(tmp), "DELAY: ctx %08x fod %08x wqfull %08x\n", atomic_read(&tgtp->defer_ctx), atomic_read(&tgtp->defer_fod), atomic_read(&tgtp->defer_wqfull)); if (strlcat(buf, tmp, PAGE_SIZE) >= PAGE_SIZE) goto buffer_done; /* Calculate outstanding IOs */ tot = atomic_read(&tgtp->rcv_fcp_cmd_drop); tot += atomic_read(&tgtp->xmt_fcp_release); tot = atomic_read(&tgtp->rcv_fcp_cmd_in) - tot; scnprintf(tmp, sizeof(tmp), "IO_CTX: %08x WAIT: cur %08x tot %08x\n" "CTX Outstanding %08llx\n\n", phba->sli4_hba.nvmet_xri_cnt, phba->sli4_hba.nvmet_io_wait_cnt, phba->sli4_hba.nvmet_io_wait_total, tot); strlcat(buf, tmp, PAGE_SIZE); goto buffer_done; } localport = vport->localport; if (!localport) { len = scnprintf(buf, PAGE_SIZE, "NVME Initiator x%llx is not allocated\n", wwn_to_u64(vport->fc_portname.u.wwn)); return len; } lport = (struct lpfc_nvme_lport *)localport->private; if (strlcat(buf, "\nNVME Initiator Enabled\n", PAGE_SIZE) >= PAGE_SIZE) goto buffer_done; scnprintf(tmp, sizeof(tmp), "XRI Dist lpfc%d Total %d IO %d ELS %d\n", phba->brd_no, phba->sli4_hba.max_cfg_param.max_xri, phba->sli4_hba.io_xri_max, lpfc_sli4_get_els_iocb_cnt(phba)); if (strlcat(buf, tmp, PAGE_SIZE) >= PAGE_SIZE) goto buffer_done; /* Port state is only one of two values for now. */ if (localport->port_id) statep = "ONLINE"; else statep = "UNKNOWN "; scnprintf(tmp, sizeof(tmp), "%s%d WWPN x%llx WWNN x%llx DID x%06x %s\n", "NVME LPORT lpfc", phba->brd_no, wwn_to_u64(vport->fc_portname.u.wwn), wwn_to_u64(vport->fc_nodename.u.wwn), localport->port_id, statep); if (strlcat(buf, tmp, PAGE_SIZE) >= PAGE_SIZE) goto buffer_done; spin_lock_irqsave(&vport->fc_nodes_list_lock, iflags); list_for_each_entry(ndlp, &vport->fc_nodes, nlp_listp) { nrport = NULL; spin_lock(&ndlp->lock); rport = lpfc_ndlp_get_nrport(ndlp); if (rport) nrport = rport->remoteport; spin_unlock(&ndlp->lock); if (!nrport) continue; /* Port state is only one of two values for now. */ switch (nrport->port_state) { case FC_OBJSTATE_ONLINE: statep = "ONLINE"; break; case FC_OBJSTATE_UNKNOWN: statep = "UNKNOWN "; break; default: statep = "UNSUPPORTED"; break; } /* Tab in to show lport ownership. */ if (strlcat(buf, "NVME RPORT ", PAGE_SIZE) >= PAGE_SIZE) goto unlock_buf_done; if (phba->brd_no >= 10) { if (strlcat(buf, " ", PAGE_SIZE) >= PAGE_SIZE) goto unlock_buf_done; } scnprintf(tmp, sizeof(tmp), "WWPN x%llx ", nrport->port_name); if (strlcat(buf, tmp, PAGE_SIZE) >= PAGE_SIZE) goto unlock_buf_done; scnprintf(tmp, sizeof(tmp), "WWNN x%llx ", nrport->node_name); if (strlcat(buf, tmp, PAGE_SIZE) >= PAGE_SIZE) goto unlock_buf_done; scnprintf(tmp, sizeof(tmp), "DID x%06x ", nrport->port_id); if (strlcat(buf, tmp, PAGE_SIZE) >= PAGE_SIZE) goto unlock_buf_done; /* An NVME rport can have multiple roles. */ if (nrport->port_role & FC_PORT_ROLE_NVME_INITIATOR) { if (strlcat(buf, "INITIATOR ", PAGE_SIZE) >= PAGE_SIZE) goto unlock_buf_done; } if (nrport->port_role & FC_PORT_ROLE_NVME_TARGET) { if (strlcat(buf, "TARGET ", PAGE_SIZE) >= PAGE_SIZE) goto unlock_buf_done; } if (nrport->port_role & FC_PORT_ROLE_NVME_DISCOVERY) { if (strlcat(buf, "DISCSRVC ", PAGE_SIZE) >= PAGE_SIZE) goto unlock_buf_done; } if (nrport->port_role & ~(FC_PORT_ROLE_NVME_INITIATOR | FC_PORT_ROLE_NVME_TARGET | FC_PORT_ROLE_NVME_DISCOVERY)) { scnprintf(tmp, sizeof(tmp), "UNKNOWN ROLE x%x", nrport->port_role); if (strlcat(buf, tmp, PAGE_SIZE) >= PAGE_SIZE) goto unlock_buf_done; } scnprintf(tmp, sizeof(tmp), "%s\n", statep); if (strlcat(buf, tmp, PAGE_SIZE) >= PAGE_SIZE) goto unlock_buf_done; } spin_unlock_irqrestore(&vport->fc_nodes_list_lock, iflags); if (!lport) goto buffer_done; if (strlcat(buf, "\nNVME Statistics\n", PAGE_SIZE) >= PAGE_SIZE) goto buffer_done; scnprintf(tmp, sizeof(tmp), "LS: Xmt %010x Cmpl %010x Abort %08x\n", atomic_read(&lport->fc4NvmeLsRequests), atomic_read(&lport->fc4NvmeLsCmpls), atomic_read(&lport->xmt_ls_abort)); if (strlcat(buf, tmp, PAGE_SIZE) >= PAGE_SIZE) goto buffer_done; scnprintf(tmp, sizeof(tmp), "LS XMIT: Err %08x CMPL: xb %08x Err %08x\n", atomic_read(&lport->xmt_ls_err), atomic_read(&lport->cmpl_ls_xb), atomic_read(&lport->cmpl_ls_err)); if (strlcat(buf, tmp, PAGE_SIZE) >= PAGE_SIZE) goto buffer_done; totin = 0; totout = 0; for (i = 0; i < phba->cfg_hdw_queue; i++) { cstat = &phba->sli4_hba.hdwq[i].nvme_cstat; tot = cstat->io_cmpls; totin += tot; data1 = cstat->input_requests; data2 = cstat->output_requests; data3 = cstat->control_requests; totout += (data1 + data2 + data3); } scnprintf(tmp, sizeof(tmp), "Total FCP Cmpl %016llx Issue %016llx " "OutIO %016llx\n", totin, totout, totout - totin); if (strlcat(buf, tmp, PAGE_SIZE) >= PAGE_SIZE) goto buffer_done; scnprintf(tmp, sizeof(tmp), "\tabort %08x noxri %08x nondlp %08x qdepth %08x " "wqerr %08x err %08x\n", atomic_read(&lport->xmt_fcp_abort), atomic_read(&lport->xmt_fcp_noxri), atomic_read(&lport->xmt_fcp_bad_ndlp), atomic_read(&lport->xmt_fcp_qdepth), atomic_read(&lport->xmt_fcp_wqerr), atomic_read(&lport->xmt_fcp_err)); if (strlcat(buf, tmp, PAGE_SIZE) >= PAGE_SIZE) goto buffer_done; scnprintf(tmp, sizeof(tmp), "FCP CMPL: xb %08x Err %08x\n", atomic_read(&lport->cmpl_fcp_xb), atomic_read(&lport->cmpl_fcp_err)); strlcat(buf, tmp, PAGE_SIZE); /* host_lock is already unlocked. */ goto buffer_done; unlock_buf_done: spin_unlock_irqrestore(&vport->fc_nodes_list_lock, iflags); buffer_done: len = strnlen(buf, PAGE_SIZE); if (unlikely(len >= (PAGE_SIZE - 1))) { lpfc_printf_log(phba, KERN_INFO, LOG_NVME, "6314 Catching potential buffer " "overflow > PAGE_SIZE = %lu bytes\n", PAGE_SIZE); strscpy(buf + PAGE_SIZE - 1 - sizeof(LPFC_INFO_MORE_STR), LPFC_INFO_MORE_STR, sizeof(LPFC_INFO_MORE_STR) + 1); } return len; } static ssize_t lpfc_scsi_stat_show(struct device *dev, struct device_attribute *attr, char *buf) { struct Scsi_Host *shost = class_to_shost(dev); struct lpfc_vport *vport = shost_priv(shost); struct lpfc_hba *phba = vport->phba; int len; struct lpfc_fc4_ctrl_stat *cstat; u64 data1, data2, data3; u64 tot, totin, totout; int i; char tmp[LPFC_MAX_SCSI_INFO_TMP_LEN] = {0}; if (!(vport->cfg_enable_fc4_type & LPFC_ENABLE_FCP) || (phba->sli_rev != LPFC_SLI_REV4)) return 0; scnprintf(buf, PAGE_SIZE, "SCSI HDWQ Statistics\n"); totin = 0; totout = 0; for (i = 0; i < phba->cfg_hdw_queue; i++) { cstat = &phba->sli4_hba.hdwq[i].scsi_cstat; tot = cstat->io_cmpls; totin += tot; data1 = cstat->input_requests; data2 = cstat->output_requests; data3 = cstat->control_requests; totout += (data1 + data2 + data3); scnprintf(tmp, sizeof(tmp), "HDWQ (%d): Rd %016llx Wr %016llx " "IO %016llx ", i, data1, data2, data3); if (strlcat(buf, tmp, PAGE_SIZE) >= PAGE_SIZE) goto buffer_done; scnprintf(tmp, sizeof(tmp), "Cmpl %016llx OutIO %016llx\n", tot, ((data1 + data2 + data3) - tot)); if (strlcat(buf, tmp, PAGE_SIZE) >= PAGE_SIZE) goto buffer_done; } scnprintf(tmp, sizeof(tmp), "Total FCP Cmpl %016llx Issue %016llx " "OutIO %016llx\n", totin, totout, totout - totin); strlcat(buf, tmp, PAGE_SIZE); buffer_done: len = strnlen(buf, PAGE_SIZE); return len; } static ssize_t lpfc_bg_info_show(struct device *dev, struct device_attribute *attr, char *buf) { struct Scsi_Host *shost = class_to_shost(dev); struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata; struct lpfc_hba *phba = vport->phba; if (phba->cfg_enable_bg) { if (phba->sli3_options & LPFC_SLI3_BG_ENABLED) return scnprintf(buf, PAGE_SIZE, "BlockGuard Enabled\n"); else return scnprintf(buf, PAGE_SIZE, "BlockGuard Not Supported\n"); } else return scnprintf(buf, PAGE_SIZE, "BlockGuard Disabled\n"); } static ssize_t lpfc_bg_guard_err_show(struct device *dev, struct device_attribute *attr, char *buf) { struct Scsi_Host *shost = class_to_shost(dev); struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata; struct lpfc_hba *phba = vport->phba; return scnprintf(buf, PAGE_SIZE, "%llu\n", (unsigned long long)phba->bg_guard_err_cnt); } static ssize_t lpfc_bg_apptag_err_show(struct device *dev, struct device_attribute *attr, char *buf) { struct Scsi_Host *shost = class_to_shost(dev); struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata; struct lpfc_hba *phba = vport->phba; return scnprintf(buf, PAGE_SIZE, "%llu\n", (unsigned long long)phba->bg_apptag_err_cnt); } static ssize_t lpfc_bg_reftag_err_show(struct device *dev, struct device_attribute *attr, char *buf) { struct Scsi_Host *shost = class_to_shost(dev); struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata; struct lpfc_hba *phba = vport->phba; return scnprintf(buf, PAGE_SIZE, "%llu\n", (unsigned long long)phba->bg_reftag_err_cnt); } /** * lpfc_info_show - Return some pci info about the host in ascii * @dev: class converted to a Scsi_host structure. * @attr: device attribute, not used. * @buf: on return contains the formatted text from lpfc_info(). * * Returns: size of formatted string. **/ static ssize_t lpfc_info_show(struct device *dev, struct device_attribute *attr, char *buf) { struct Scsi_Host *host = class_to_shost(dev); return scnprintf(buf, PAGE_SIZE, "%s\n", lpfc_info(host)); } /** * lpfc_serialnum_show - Return the hba serial number in ascii * @dev: class converted to a Scsi_host structure. * @attr: device attribute, not used. * @buf: on return contains the formatted text serial number. * * Returns: size of formatted string. **/ static ssize_t lpfc_serialnum_show(struct device *dev, struct device_attribute *attr, char *buf) { struct Scsi_Host *shost = class_to_shost(dev); struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata; struct lpfc_hba *phba = vport->phba; return scnprintf(buf, PAGE_SIZE, "%s\n", phba->SerialNumber); } /** * lpfc_temp_sensor_show - Return the temperature sensor level * @dev: class converted to a Scsi_host structure. * @attr: device attribute, not used. * @buf: on return contains the formatted support level. * * Description: * Returns a number indicating the temperature sensor level currently * supported, zero or one in ascii. * * Returns: size of formatted string. **/ static ssize_t lpfc_temp_sensor_show(struct device *dev, struct device_attribute *attr, char *buf) { struct Scsi_Host *shost = class_to_shost(dev); struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata; struct lpfc_hba *phba = vport->phba; return scnprintf(buf, PAGE_SIZE, "%d\n", phba->temp_sensor_support); } /** * lpfc_modeldesc_show - Return the model description of the hba * @dev: class converted to a Scsi_host structure. * @attr: device attribute, not used. * @buf: on return contains the scsi vpd model description. * * Returns: size of formatted string. **/ static ssize_t lpfc_modeldesc_show(struct device *dev, struct device_attribute *attr, char *buf) { struct Scsi_Host *shost = class_to_shost(dev); struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata; struct lpfc_hba *phba = vport->phba; return scnprintf(buf, PAGE_SIZE, "%s\n", phba->ModelDesc); } /** * lpfc_modelname_show - Return the model name of the hba * @dev: class converted to a Scsi_host structure. * @attr: device attribute, not used. * @buf: on return contains the scsi vpd model name. * * Returns: size of formatted string. **/ static ssize_t lpfc_modelname_show(struct device *dev, struct device_attribute *attr, char *buf) { struct Scsi_Host *shost = class_to_shost(dev); struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata; struct lpfc_hba *phba = vport->phba; return scnprintf(buf, PAGE_SIZE, "%s\n", phba->ModelName); } /** * lpfc_programtype_show - Return the program type of the hba * @dev: class converted to a Scsi_host structure. * @attr: device attribute, not used. * @buf: on return contains the scsi vpd program type. * * Returns: size of formatted string. **/ static ssize_t lpfc_programtype_show(struct device *dev, struct device_attribute *attr, char *buf) { struct Scsi_Host *shost = class_to_shost(dev); struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata; struct lpfc_hba *phba = vport->phba; return scnprintf(buf, PAGE_SIZE, "%s\n", phba->ProgramType); } /** * lpfc_vportnum_show - Return the port number in ascii of the hba * @dev: class converted to a Scsi_host structure. * @attr: device attribute, not used. * @buf: on return contains scsi vpd program type. * * Returns: size of formatted string. **/ static ssize_t lpfc_vportnum_show(struct device *dev, struct device_attribute *attr, char *buf) { struct Scsi_Host *shost = class_to_shost(dev); struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata; struct lpfc_hba *phba = vport->phba; return scnprintf(buf, PAGE_SIZE, "%s\n", phba->Port); } /** * lpfc_fwrev_show - Return the firmware rev running in the hba * @dev: class converted to a Scsi_host structure. * @attr: device attribute, not used. * @buf: on return contains the scsi vpd program type. * * Returns: size of formatted string. **/ static ssize_t lpfc_fwrev_show(struct device *dev, struct device_attribute *attr, char *buf) { struct Scsi_Host *shost = class_to_shost(dev); struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata; struct lpfc_hba *phba = vport->phba; uint32_t if_type; uint8_t sli_family; char fwrev[FW_REV_STR_SIZE]; int len; lpfc_decode_firmware_rev(phba, fwrev, 1); if_type = phba->sli4_hba.pc_sli4_params.if_type; sli_family = phba->sli4_hba.pc_sli4_params.sli_family; if (phba->sli_rev < LPFC_SLI_REV4) len = scnprintf(buf, PAGE_SIZE, "%s, sli-%d\n", fwrev, phba->sli_rev); else len = scnprintf(buf, PAGE_SIZE, "%s, sli-%d:%d:%x\n", fwrev, phba->sli_rev, if_type, sli_family); return len; } /** * lpfc_hdw_show - Return the jedec information about the hba * @dev: class converted to a Scsi_host structure. * @attr: device attribute, not used. * @buf: on return contains the scsi vpd program type. * * Returns: size of formatted string. **/ static ssize_t lpfc_hdw_show(struct device *dev, struct device_attribute *attr, char *buf) { char hdw[9]; struct Scsi_Host *shost = class_to_shost(dev); struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata; struct lpfc_hba *phba = vport->phba; lpfc_vpd_t *vp = &phba->vpd; lpfc_jedec_to_ascii(vp->rev.biuRev, hdw); return scnprintf(buf, PAGE_SIZE, "%s %08x %08x\n", hdw, vp->rev.smRev, vp->rev.smFwRev); } /** * lpfc_option_rom_version_show - Return the adapter ROM FCode version * @dev: class converted to a Scsi_host structure. * @attr: device attribute, not used. * @buf: on return contains the ROM and FCode ascii strings. * * Returns: size of formatted string. **/ static ssize_t lpfc_option_rom_version_show(struct device *dev, struct device_attribute *attr, char *buf) { struct Scsi_Host *shost = class_to_shost(dev); struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata; struct lpfc_hba *phba = vport->phba; char fwrev[FW_REV_STR_SIZE]; if (phba->sli_rev < LPFC_SLI_REV4) return scnprintf(buf, PAGE_SIZE, "%s\n", phba->OptionROMVersion); lpfc_decode_firmware_rev(phba, fwrev, 1); return scnprintf(buf, PAGE_SIZE, "%s\n", fwrev); } /** * lpfc_link_state_show - Return the link state of the port * @dev: class converted to a Scsi_host structure. * @attr: device attribute, not used. * @buf: on return contains text describing the state of the link. * * Notes: * The switch statement has no default so zero will be returned. * * Returns: size of formatted string. **/ static ssize_t lpfc_link_state_show(struct device *dev, struct device_attribute *attr, char *buf) { struct Scsi_Host *shost = class_to_shost(dev); struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata; struct lpfc_hba *phba = vport->phba; int len = 0; switch (phba->link_state) { case LPFC_LINK_UNKNOWN: case LPFC_WARM_START: case LPFC_INIT_START: case LPFC_INIT_MBX_CMDS: case LPFC_LINK_DOWN: case LPFC_HBA_ERROR: if (test_bit(LINK_DISABLED, &phba->hba_flag)) len += scnprintf(buf + len, PAGE_SIZE-len, "Link Down - User disabled\n"); else len += scnprintf(buf + len, PAGE_SIZE-len, "Link Down\n"); break; case LPFC_LINK_UP: case LPFC_CLEAR_LA: case LPFC_HBA_READY: len += scnprintf(buf + len, PAGE_SIZE-len, "Link Up - "); switch (vport->port_state) { case LPFC_LOCAL_CFG_LINK: len += scnprintf(buf + len, PAGE_SIZE-len, "Configuring Link\n"); break; case LPFC_FDISC: case LPFC_FLOGI: case LPFC_FABRIC_CFG_LINK: case LPFC_NS_REG: case LPFC_NS_QRY: case LPFC_BUILD_DISC_LIST: case LPFC_DISC_AUTH: len += scnprintf(buf + len, PAGE_SIZE - len, "Discovery\n"); break; case LPFC_VPORT_READY: len += scnprintf(buf + len, PAGE_SIZE - len, "Ready\n"); break; case LPFC_VPORT_FAILED: len += scnprintf(buf + len, PAGE_SIZE - len, "Failed\n"); break; case LPFC_VPORT_UNKNOWN: len += scnprintf(buf + len, PAGE_SIZE - len, "Unknown\n"); break; } if (phba->fc_topology == LPFC_TOPOLOGY_LOOP) { if (test_bit(FC_PUBLIC_LOOP, &vport->fc_flag)) len += scnprintf(buf + len, PAGE_SIZE-len, " Public Loop\n"); else len += scnprintf(buf + len, PAGE_SIZE-len, " Private Loop\n"); } else { if (test_bit(FC_FABRIC, &vport->fc_flag)) { if (phba->sli_rev == LPFC_SLI_REV4 && vport->port_type == LPFC_PHYSICAL_PORT && phba->sli4_hba.fawwpn_flag & LPFC_FAWWPN_FABRIC) len += scnprintf(buf + len, PAGE_SIZE - len, " Fabric FA-PWWN\n"); else len += scnprintf(buf + len, PAGE_SIZE - len, " Fabric\n"); } else { len += scnprintf(buf + len, PAGE_SIZE-len, " Point-2-Point\n"); } } } if ((phba->sli_rev == LPFC_SLI_REV4) && ((bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) == LPFC_SLI_INTF_IF_TYPE_6))) { struct lpfc_trunk_link link = phba->trunk_link; if (bf_get(lpfc_conf_trunk_port0, &phba->sli4_hba)) len += scnprintf(buf + len, PAGE_SIZE - len, "Trunk port 0: Link %s %s\n", (link.link0.state == LPFC_LINK_UP) ? "Up" : "Down. ", trunk_errmsg[link.link0.fault]); if (bf_get(lpfc_conf_trunk_port1, &phba->sli4_hba)) len += scnprintf(buf + len, PAGE_SIZE - len, "Trunk port 1: Link %s %s\n", (link.link1.state == LPFC_LINK_UP) ? "Up" : "Down. ", trunk_errmsg[link.link1.fault]); if (bf_get(lpfc_conf_trunk_port2, &phba->sli4_hba)) len += scnprintf(buf + len, PAGE_SIZE - len, "Trunk port 2: Link %s %s\n", (link.link2.state == LPFC_LINK_UP) ? "Up" : "Down. ", trunk_errmsg[link.link2.fault]); if (bf_get(lpfc_conf_trunk_port3, &phba->sli4_hba)) len += scnprintf(buf + len, PAGE_SIZE - len, "Trunk port 3: Link %s %s\n", (link.link3.state == LPFC_LINK_UP) ? "Up" : "Down. ", trunk_errmsg[link.link3.fault]); } return len; } /** * lpfc_sli4_protocol_show - Return the fip mode of the HBA * @dev: class unused variable. * @attr: device attribute, not used. * @buf: on return contains the module description text. * * Returns: size of formatted string. **/ static ssize_t lpfc_sli4_protocol_show(struct device *dev, struct device_attribute *attr, char *buf) { struct Scsi_Host *shost = class_to_shost(dev); struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata; struct lpfc_hba *phba = vport->phba; if (phba->sli_rev < LPFC_SLI_REV4) return scnprintf(buf, PAGE_SIZE, "fc\n"); if (phba->sli4_hba.lnk_info.lnk_dv == LPFC_LNK_DAT_VAL) { if (phba->sli4_hba.lnk_info.lnk_tp == LPFC_LNK_TYPE_GE) return scnprintf(buf, PAGE_SIZE, "fcoe\n"); if (phba->sli4_hba.lnk_info.lnk_tp == LPFC_LNK_TYPE_FC) return scnprintf(buf, PAGE_SIZE, "fc\n"); } return scnprintf(buf, PAGE_SIZE, "unknown\n"); } /** * lpfc_oas_supported_show - Return whether or not Optimized Access Storage * (OAS) is supported. * @dev: class unused variable. * @attr: device attribute, not used. * @buf: on return contains the module description text. * * Returns: size of formatted string. **/ static ssize_t lpfc_oas_supported_show(struct device *dev, struct device_attribute *attr, char *buf) { struct Scsi_Host *shost = class_to_shost(dev); struct lpfc_vport *vport = (struct lpfc_vport *)shost->hostdata; struct lpfc_hba *phba = vport->phba; return scnprintf(buf, PAGE_SIZE, "%d\n", phba->sli4_hba.pc_sli4_params.oas_supported); } /** * lpfc_link_state_store - Transition the link_state on an HBA port * @dev: class device that is converted into a Scsi_host. * @attr: device attribute, not used. * @buf: one or more lpfc_polling_flags values. * @count: not used. * * Returns: * -EINVAL if the buffer is not "up" or "down" * return from link state change function if non-zero * length of the buf on success **/ static ssize_t lpfc_link_state_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { struct Scsi_Host *shost = class_to_shost(dev); struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata; struct lpfc_hba *phba = vport->phba; int status = -EINVAL; if ((strncmp(buf, "up", sizeof("up") - 1) == 0) && (phba->link_state == LPFC_LINK_DOWN)) status = phba->lpfc_hba_init_link(phba, MBX_NOWAIT); else if ((strncmp(buf, "down", sizeof("down") - 1) == 0) && (phba->link_state >= LPFC_LINK_UP)) status = phba->lpfc_hba_down_link(phba, MBX_NOWAIT); if (status == 0) return strlen(buf); else return status; } /** * lpfc_num_discovered_ports_show - Return sum of mapped and unmapped vports * @dev: class device that is converted into a Scsi_host. * @attr: device attribute, not used. * @buf: on return contains the sum of fc mapped and unmapped. * * Description: * Returns the ascii text number of the sum of the fc mapped and unmapped * vport counts. * * Returns: size of formatted string. **/ static ssize_t lpfc_num_discovered_ports_show(struct device *dev, struct device_attribute *attr, char *buf) { struct Scsi_Host *shost = class_to_shost(dev); struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata; return scnprintf(buf, PAGE_SIZE, "%d\n", atomic_read(&vport->fc_map_cnt) + atomic_read(&vport->fc_unmap_cnt)); } /** * lpfc_issue_lip - Misnomer, name carried over from long ago * @shost: Scsi_Host pointer. * * Description: * Bring the link down gracefully then re-init the link. The firmware will * re-init the fiber channel interface as required. Does not issue a LIP. * * Returns: * -EPERM port offline or management commands are being blocked * -ENOMEM cannot allocate memory for the mailbox command * -EIO error sending the mailbox command * zero for success **/ static int lpfc_issue_lip(struct Scsi_Host *shost) { struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata; struct lpfc_hba *phba = vport->phba; LPFC_MBOXQ_t *pmboxq; int mbxstatus = MBXERR_ERROR; /* * If the link is offline, disabled or BLOCK_MGMT_IO * it doesn't make any sense to allow issue_lip */ if (test_bit(FC_OFFLINE_MODE, &vport->fc_flag) || test_bit(LINK_DISABLED, &phba->hba_flag) || (phba->sli.sli_flag & LPFC_BLOCK_MGMT_IO)) return -EPERM; pmboxq = mempool_alloc(phba->mbox_mem_pool,GFP_KERNEL); if (!pmboxq) return -ENOMEM; memset((void *)pmboxq, 0, sizeof (LPFC_MBOXQ_t)); pmboxq->u.mb.mbxCommand = MBX_DOWN_LINK; pmboxq->u.mb.mbxOwner = OWN_HOST; if (test_bit(FC_PT2PT, &vport->fc_flag)) clear_bit(FC_PT2PT_NO_NVME, &vport->fc_flag); mbxstatus = lpfc_sli_issue_mbox_wait(phba, pmboxq, LPFC_MBOX_TMO * 2); if ((mbxstatus == MBX_SUCCESS) && (pmboxq->u.mb.mbxStatus == 0 || pmboxq->u.mb.mbxStatus == MBXERR_LINK_DOWN)) { memset((void *)pmboxq, 0, sizeof (LPFC_MBOXQ_t)); lpfc_init_link(phba, pmboxq, phba->cfg_topology, phba->cfg_link_speed); mbxstatus = lpfc_sli_issue_mbox_wait(phba, pmboxq, phba->fc_ratov * 2); if ((mbxstatus == MBX_SUCCESS) && (pmboxq->u.mb.mbxStatus == MBXERR_SEC_NO_PERMISSION)) lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI, "2859 SLI authentication is required " "for INIT_LINK but has not done yet\n"); } lpfc_set_loopback_flag(phba); if (mbxstatus != MBX_TIMEOUT) mempool_free(pmboxq, phba->mbox_mem_pool); if (mbxstatus == MBXERR_ERROR) return -EIO; return 0; } int lpfc_emptyq_wait(struct lpfc_hba *phba, struct list_head *q, spinlock_t *lock) { int cnt = 0; spin_lock_irq(lock); while (!list_empty(q)) { spin_unlock_irq(lock); msleep(20); if (cnt++ > 250) { /* 5 secs */ lpfc_printf_log(phba, KERN_WARNING, LOG_INIT, "0466 Outstanding IO when " "bringing Adapter offline\n"); return 0; } spin_lock_irq(lock); } spin_unlock_irq(lock); return 1; } /** * lpfc_do_offline - Issues a mailbox command to bring the link down * @phba: lpfc_hba pointer. * @type: LPFC_EVT_OFFLINE, LPFC_EVT_WARM_START, LPFC_EVT_KILL. * * Notes: * Assumes any error from lpfc_do_offline() will be negative. * Can wait up to 5 seconds for the port ring buffers count * to reach zero, prints a warning if it is not zero and continues. * lpfc_workq_post_event() returns a non-zero return code if call fails. * * Returns: * -EIO error posting the event * zero for success **/ static int lpfc_do_offline(struct lpfc_hba *phba, uint32_t type) { struct completion online_compl; struct lpfc_queue *qp = NULL; struct lpfc_sli_ring *pring; struct lpfc_sli *psli; int status = 0; int i; int rc; init_completion(&online_compl); rc = lpfc_workq_post_event(phba, &status, &online_compl, LPFC_EVT_OFFLINE_PREP); if (rc == 0) return -ENOMEM; wait_for_completion(&online_compl); if (status != 0) return -EIO; psli = &phba->sli; /* * If freeing the queues have already started, don't access them. * Otherwise set FREE_WAIT to indicate that queues are being used * to hold the freeing process until we finish. */ spin_lock_irq(&phba->hbalock); if (!(psli->sli_flag & LPFC_QUEUE_FREE_INIT)) { psli->sli_flag |= LPFC_QUEUE_FREE_WAIT; } else { spin_unlock_irq(&phba->hbalock); goto skip_wait; } spin_unlock_irq(&phba->hbalock); /* Wait a little for things to settle down, but not * long enough for dev loss timeout to expire. */ if (phba->sli_rev != LPFC_SLI_REV4) { for (i = 0; i < psli->num_rings; i++) { pring = &psli->sli3_ring[i]; if (!lpfc_emptyq_wait(phba, &pring->txcmplq, &phba->hbalock)) goto out; } } else { list_for_each_entry(qp, &phba->sli4_hba.lpfc_wq_list, wq_list) { pring = qp->pring; if (!pring) continue; if (!lpfc_emptyq_wait(phba, &pring->txcmplq, &pring->ring_lock)) goto out; } } out: spin_lock_irq(&phba->hbalock); psli->sli_flag &= ~LPFC_QUEUE_FREE_WAIT; spin_unlock_irq(&phba->hbalock); skip_wait: init_completion(&online_compl); rc = lpfc_workq_post_event(phba, &status, &online_compl, type); if (rc == 0) return -ENOMEM; wait_for_completion(&online_compl); if (status != 0) return -EIO; return 0; } /** * lpfc_reset_pci_bus - resets PCI bridge controller's secondary bus of an HBA * @phba: lpfc_hba pointer. * * Description: * Issues a PCI secondary bus reset for the phba->pcidev. * * Notes: * First walks the bus_list to ensure only PCI devices with Emulex * vendor id, device ids that support hot reset, only one occurrence * of function 0, and all ports on the bus are in offline mode to ensure the * hot reset only affects one valid HBA. * * Returns: * -ENOTSUPP, cfg_enable_hba_reset must be of value 2 * -ENODEV, NULL ptr to pcidev * -EBADSLT, detected invalid device * -EBUSY, port is not in offline state * 0, successful */ static int lpfc_reset_pci_bus(struct lpfc_hba *phba) { struct pci_dev *pdev = phba->pcidev; struct Scsi_Host *shost = NULL; struct lpfc_hba *phba_other = NULL; struct pci_dev *ptr = NULL; int res; if (phba->cfg_enable_hba_reset != 2) return -ENOTSUPP; if (!pdev) { lpfc_printf_log(phba, KERN_INFO, LOG_INIT, "8345 pdev NULL!\n"); return -ENODEV; } res = lpfc_check_pci_resettable(phba); if (res) return res; /* Walk the list of devices on the pci_dev's bus */ list_for_each_entry(ptr, &pdev->bus->devices, bus_list) { /* Check port is offline */ shost = pci_get_drvdata(ptr); if (shost) { phba_other = ((struct lpfc_vport *)shost->hostdata)->phba; if (!test_bit(FC_OFFLINE_MODE, &phba_other->pport->fc_flag)) { lpfc_printf_log(phba_other, KERN_INFO, LOG_INIT, "8349 WWPN = 0x%02x%02x%02x%02x" "%02x%02x%02x%02x is not " "offline!\n", phba_other->wwpn[0], phba_other->wwpn[1], phba_other->wwpn[2], phba_other->wwpn[3], phba_other->wwpn[4], phba_other->wwpn[5], phba_other->wwpn[6], phba_other->wwpn[7]); return -EBUSY; } } } /* Issue PCI bus reset */ res = pci_reset_bus(pdev); if (res) { lpfc_printf_log(phba, KERN_ERR, LOG_INIT, "8350 PCI reset bus failed: %d\n", res); } return res; } /** * lpfc_selective_reset - Offline then onlines the port * @phba: lpfc_hba pointer. * * Description: * If the port is configured to allow a reset then the hba is brought * offline then online. * * Notes: * Assumes any error from lpfc_do_offline() will be negative. * Do not make this function static. * * Returns: * lpfc_do_offline() return code if not zero * -EIO reset not configured or error posting the event * zero for success **/ int lpfc_selective_reset(struct lpfc_hba *phba) { struct completion online_compl; int status = 0; int rc; if (!phba->cfg_enable_hba_reset) return -EACCES; if (!test_bit(FC_OFFLINE_MODE, &phba->pport->fc_flag)) { status = lpfc_do_offline(phba, LPFC_EVT_OFFLINE); if (status != 0) return status; } init_completion(&online_compl); rc = lpfc_workq_post_event(phba, &status, &online_compl, LPFC_EVT_ONLINE); if (rc == 0) return -ENOMEM; wait_for_completion(&online_compl); if (status != 0) return -EIO; return 0; } /** * lpfc_issue_reset - Selectively resets an adapter * @dev: class device that is converted into a Scsi_host. * @attr: device attribute, not used. * @buf: containing the string "selective". * @count: unused variable. * * Description: * If the buf contains the string "selective" then lpfc_selective_reset() * is called to perform the reset. * * Notes: * Assumes any error from lpfc_selective_reset() will be negative. * If lpfc_selective_reset() returns zero then the length of the buffer * is returned which indicates success * * Returns: * -EINVAL if the buffer does not contain the string "selective" * length of buf if lpfc-selective_reset() if the call succeeds * return value of lpfc_selective_reset() if the call fails **/ static ssize_t lpfc_issue_reset(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { struct Scsi_Host *shost = class_to_shost(dev); struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata; struct lpfc_hba *phba = vport->phba; int status = -EINVAL; if (!phba->cfg_enable_hba_reset) return -EACCES; if (strncmp(buf, "selective", sizeof("selective") - 1) == 0) status = phba->lpfc_selective_reset(phba); if (status == 0) return strlen(buf); else return status; } /** * lpfc_sli4_pdev_status_reg_wait - Wait for pdev status register for readyness * @phba: lpfc_hba pointer. * * Description: * SLI4 interface type-2 device to wait on the sliport status register for * the readyness after performing a firmware reset. * * Returns: * zero for success, -EPERM when port does not have privilege to perform the * reset, -EIO when port timeout from recovering from the reset. * * Note: * As the caller will interpret the return code by value, be careful in making * change or addition to return codes. **/ int lpfc_sli4_pdev_status_reg_wait(struct lpfc_hba *phba) { struct lpfc_register portstat_reg = {0}; int i; msleep(100); if (lpfc_readl(phba->sli4_hba.u.if_type2.STATUSregaddr, &portstat_reg.word0)) return -EIO; /* verify if privileged for the request operation */ if (!bf_get(lpfc_sliport_status_rn, &portstat_reg) && !bf_get(lpfc_sliport_status_err, &portstat_reg)) return -EPERM; /* There is no point to wait if the port is in an unrecoverable * state. */ if (lpfc_sli4_unrecoverable_port(&portstat_reg)) return -EIO; /* wait for the SLI port firmware ready after firmware reset */ for (i = 0; i < LPFC_FW_RESET_MAXIMUM_WAIT_10MS_CNT; i++) { msleep(10); if (lpfc_readl(phba->sli4_hba.u.if_type2.STATUSregaddr, &portstat_reg.word0)) continue; if (!bf_get(lpfc_sliport_status_err, &portstat_reg)) continue; if (!bf_get(lpfc_sliport_status_rn, &portstat_reg)) continue; if (!bf_get(lpfc_sliport_status_rdy, &portstat_reg)) continue; break; } if (i < LPFC_FW_RESET_MAXIMUM_WAIT_10MS_CNT) return 0; else return -EIO; } /** * lpfc_sli4_pdev_reg_request - Request physical dev to perform a register acc * @phba: lpfc_hba pointer. * @opcode: The sli4 config command opcode. * * Description: * Request SLI4 interface type-2 device to perform a physical register set * access. * * Returns: * zero for success **/ static ssize_t lpfc_sli4_pdev_reg_request(struct lpfc_hba *phba, uint32_t opcode) { struct completion online_compl; struct pci_dev *pdev = phba->pcidev; unsigned long before_fc_flag; uint32_t sriov_nr_virtfn; uint32_t reg_val; int status = 0, rc = 0; int job_posted = 1, sriov_err; if (!phba->cfg_enable_hba_reset) return -EACCES; if ((phba->sli_rev < LPFC_SLI_REV4) || (bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) < LPFC_SLI_INTF_IF_TYPE_2)) return -EPERM; /* Keep state if we need to restore back */ before_fc_flag = phba->pport->fc_flag; sriov_nr_virtfn = phba->cfg_sriov_nr_virtfn; if (opcode == LPFC_FW_DUMP) { init_completion(&online_compl); phba->fw_dump_cmpl = &online_compl; } else { /* Disable SR-IOV virtual functions if enabled */ if (phba->cfg_sriov_nr_virtfn) { pci_disable_sriov(pdev); phba->cfg_sriov_nr_virtfn = 0; } status = lpfc_do_offline(phba, LPFC_EVT_OFFLINE); if (status != 0) return status; /* wait for the device to be quiesced before firmware reset */ msleep(100); } reg_val = readl(phba->sli4_hba.conf_regs_memmap_p + LPFC_CTL_PDEV_CTL_OFFSET); if (opcode == LPFC_FW_DUMP) reg_val |= LPFC_FW_DUMP_REQUEST; else if (opcode == LPFC_FW_RESET) reg_val |= LPFC_CTL_PDEV_CTL_FRST; else if (opcode == LPFC_DV_RESET) reg_val |= LPFC_CTL_PDEV_CTL_DRST; writel(reg_val, phba->sli4_hba.conf_regs_memmap_p + LPFC_CTL_PDEV_CTL_OFFSET); /* flush */ readl(phba->sli4_hba.conf_regs_memmap_p + LPFC_CTL_PDEV_CTL_OFFSET); /* delay driver action following IF_TYPE_2 reset */ rc = lpfc_sli4_pdev_status_reg_wait(phba); if (rc == -EPERM) { /* no privilege for reset */ lpfc_printf_log(phba, KERN_ERR, LOG_SLI, "3150 No privilege to perform the requested " "access: x%x\n", reg_val); } else if (rc == -EIO) { /* reset failed, there is nothing more we can do */ lpfc_printf_log(phba, KERN_ERR, LOG_SLI, "3153 Fail to perform the requested " "access: x%x\n", reg_val); if (phba->fw_dump_cmpl) phba->fw_dump_cmpl = NULL; return rc; } /* keep the original port state */ if (test_bit(FC_OFFLINE_MODE, &before_fc_flag)) { if (phba->fw_dump_cmpl) phba->fw_dump_cmpl = NULL; goto out; } /* Firmware dump will trigger an HA_ERATT event, and * lpfc_handle_eratt_s4 routine already handles bringing the port back * online. */ if (opcode == LPFC_FW_DUMP) { wait_for_completion(phba->fw_dump_cmpl); } else { init_completion(&online_compl); job_posted = lpfc_workq_post_event(phba, &status, &online_compl, LPFC_EVT_ONLINE); if (!job_posted) goto out; wait_for_completion(&online_compl); } out: /* in any case, restore the virtual functions enabled as before */ if (sriov_nr_virtfn) { /* If fw_dump was performed, first disable to clean up */ if (opcode == LPFC_FW_DUMP) { pci_disable_sriov(pdev); phba->cfg_sriov_nr_virtfn = 0; } sriov_err = lpfc_sli_probe_sriov_nr_virtfn(phba, sriov_nr_virtfn); if (!sriov_err) phba->cfg_sriov_nr_virtfn = sriov_nr_virtfn; } /* return proper error code */ if (!rc) { if (!job_posted) rc = -ENOMEM; else if (status) rc = -EIO; } return rc; } /** * lpfc_nport_evt_cnt_show - Return the number of nport events * @dev: class device that is converted into a Scsi_host. * @attr: device attribute, not used. * @buf: on return contains the ascii number of nport events. * * Returns: size of formatted string. **/ static ssize_t lpfc_nport_evt_cnt_show(struct device *dev, struct device_attribute *attr, char *buf) { struct Scsi_Host *shost = class_to_shost(dev); struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata; struct lpfc_hba *phba = vport->phba; return scnprintf(buf, PAGE_SIZE, "%d\n", phba->nport_event_cnt); } static int lpfc_set_trunking(struct lpfc_hba *phba, char *buff_out) { LPFC_MBOXQ_t *mbox = NULL; unsigned long val = 0; char *pval = NULL; int rc = 0; if (!strncmp("enable", buff_out, strlen("enable"))) { pval = buff_out + strlen("enable") + 1; rc = kstrtoul(pval, 0, &val); if (rc) return rc; /* Invalid number */ } else if (!strncmp("disable", buff_out, strlen("disable"))) { val = 0; } else { return -EINVAL; /* Invalid command */ } switch (val) { case 0: val = 0x0; /* Disable */ break; case 2: val = 0x1; /* Enable two port trunk */ break; case 4: val = 0x2; /* Enable four port trunk */ break; default: return -EINVAL; } lpfc_printf_log(phba, KERN_ERR, LOG_MBOX, "0070 Set trunk mode with val %ld ", val); mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); if (!mbox) return -ENOMEM; lpfc_sli4_config(phba, mbox, LPFC_MBOX_SUBSYSTEM_FCOE, LPFC_MBOX_OPCODE_FCOE_FC_SET_TRUNK_MODE, 12, LPFC_SLI4_MBX_EMBED); bf_set(lpfc_mbx_set_trunk_mode, &mbox->u.mqe.un.set_trunk_mode, val); rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL); if (rc) lpfc_printf_log(phba, KERN_ERR, LOG_MBOX, "0071 Set trunk mode failed with status: %d", rc); mempool_free(mbox, phba->mbox_mem_pool); return 0; } static ssize_t lpfc_xcvr_data_show(struct device *dev, struct device_attribute *attr, char *buf) { struct Scsi_Host *shost = class_to_shost(dev); struct lpfc_vport *vport = (struct lpfc_vport *)shost->hostdata; struct lpfc_hba *phba = vport->phba; int rc; int len = 0; struct lpfc_rdp_context *rdp_context; u16 temperature; u16 rx_power; u16 tx_bias; u16 tx_power; u16 vcc; char chbuf[128]; u16 wavelength = 0; struct sff_trasnceiver_codes_byte7 *trasn_code_byte7; /* Get transceiver information */ rdp_context = kmalloc(sizeof(*rdp_context), GFP_KERNEL); rc = lpfc_get_sfp_info_wait(phba, rdp_context); if (rc) { len = scnprintf(buf, PAGE_SIZE - len, "SFP info NA:\n"); goto out_free_rdp; } strscpy(chbuf, &rdp_context->page_a0[SSF_VENDOR_NAME], 16); len = scnprintf(buf, PAGE_SIZE - len, "VendorName:\t%s\n", chbuf); len += scnprintf(buf + len, PAGE_SIZE - len, "VendorOUI:\t%02x-%02x-%02x\n", (uint8_t)rdp_context->page_a0[SSF_VENDOR_OUI], (uint8_t)rdp_context->page_a0[SSF_VENDOR_OUI + 1], (uint8_t)rdp_context->page_a0[SSF_VENDOR_OUI + 2]); strscpy(chbuf, &rdp_context->page_a0[SSF_VENDOR_PN], 16); len += scnprintf(buf + len, PAGE_SIZE - len, "VendorPN:\t%s\n", chbuf); strscpy(chbuf, &rdp_context->page_a0[SSF_VENDOR_SN], 16); len += scnprintf(buf + len, PAGE_SIZE - len, "VendorSN:\t%s\n", chbuf); strscpy(chbuf, &rdp_context->page_a0[SSF_VENDOR_REV], 4); len += scnprintf(buf + len, PAGE_SIZE - len, "VendorRev:\t%s\n", chbuf); strscpy(chbuf, &rdp_context->page_a0[SSF_DATE_CODE], 8); len += scnprintf(buf + len, PAGE_SIZE - len, "DateCode:\t%s\n", chbuf); len += scnprintf(buf + len, PAGE_SIZE - len, "Identifier:\t%xh\n", (uint8_t)rdp_context->page_a0[SSF_IDENTIFIER]); len += scnprintf(buf + len, PAGE_SIZE - len, "ExtIdentifier:\t%xh\n", (uint8_t)rdp_context->page_a0[SSF_EXT_IDENTIFIER]); len += scnprintf(buf + len, PAGE_SIZE - len, "Connector:\t%xh\n", (uint8_t)rdp_context->page_a0[SSF_CONNECTOR]); wavelength = (rdp_context->page_a0[SSF_WAVELENGTH_B1] << 8) | rdp_context->page_a0[SSF_WAVELENGTH_B0]; len += scnprintf(buf + len, PAGE_SIZE - len, "Wavelength:\t%d nm\n", wavelength); trasn_code_byte7 = (struct sff_trasnceiver_codes_byte7 *) &rdp_context->page_a0[SSF_TRANSCEIVER_CODE_B7]; len += scnprintf(buf + len, PAGE_SIZE - len, "Speeds: \t"); if (*(uint8_t *)trasn_code_byte7 == 0) { len += scnprintf(buf + len, PAGE_SIZE - len, "Unknown\n"); } else { if (trasn_code_byte7->fc_sp_100MB) len += scnprintf(buf + len, PAGE_SIZE - len, "1 "); if (trasn_code_byte7->fc_sp_200mb) len += scnprintf(buf + len, PAGE_SIZE - len, "2 "); if (trasn_code_byte7->fc_sp_400MB) len += scnprintf(buf + len, PAGE_SIZE - len, "4 "); if (trasn_code_byte7->fc_sp_800MB) len += scnprintf(buf + len, PAGE_SIZE - len, "8 "); if (trasn_code_byte7->fc_sp_1600MB) len += scnprintf(buf + len, PAGE_SIZE - len, "16 "); if (trasn_code_byte7->fc_sp_3200MB) len += scnprintf(buf + len, PAGE_SIZE - len, "32 "); if (trasn_code_byte7->speed_chk_ecc) len += scnprintf(buf + len, PAGE_SIZE - len, "64 "); len += scnprintf(buf + len, PAGE_SIZE - len, "GB\n"); } temperature = (rdp_context->page_a2[SFF_TEMPERATURE_B1] << 8 | rdp_context->page_a2[SFF_TEMPERATURE_B0]); vcc = (rdp_context->page_a2[SFF_VCC_B1] << 8 | rdp_context->page_a2[SFF_VCC_B0]); tx_power = (rdp_context->page_a2[SFF_TXPOWER_B1] << 8 | rdp_context->page_a2[SFF_TXPOWER_B0]); tx_bias = (rdp_context->page_a2[SFF_TX_BIAS_CURRENT_B1] << 8 | rdp_context->page_a2[SFF_TX_BIAS_CURRENT_B0]); rx_power = (rdp_context->page_a2[SFF_RXPOWER_B1] << 8 | rdp_context->page_a2[SFF_RXPOWER_B0]); len += scnprintf(buf + len, PAGE_SIZE - len, "Temperature:\tx%04x C\n", temperature); len += scnprintf(buf + len, PAGE_SIZE - len, "Vcc:\t\tx%04x V\n", vcc); len += scnprintf(buf + len, PAGE_SIZE - len, "TxBiasCurrent:\tx%04x mA\n", tx_bias); len += scnprintf(buf + len, PAGE_SIZE - len, "TxPower:\tx%04x mW\n", tx_power); len += scnprintf(buf + len, PAGE_SIZE - len, "RxPower:\tx%04x mW\n", rx_power); out_free_rdp: kfree(rdp_context); return len; } /** * lpfc_board_mode_show - Return the state of the board * @dev: class device that is converted into a Scsi_host. * @attr: device attribute, not used. * @buf: on return contains the state of the adapter. * * Returns: size of formatted string. **/ static ssize_t lpfc_board_mode_show(struct device *dev, struct device_attribute *attr, char *buf) { struct Scsi_Host *shost = class_to_shost(dev); struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata; struct lpfc_hba *phba = vport->phba; char * state; if (phba->link_state == LPFC_HBA_ERROR) state = "error"; else if (phba->link_state == LPFC_WARM_START) state = "warm start"; else if (phba->link_state == LPFC_INIT_START) state = "offline"; else state = "online"; return scnprintf(buf, PAGE_SIZE, "%s\n", state); } /** * lpfc_board_mode_store - Puts the hba in online, offline, warm or error state * @dev: class device that is converted into a Scsi_host. * @attr: device attribute, not used. * @buf: containing one of the strings "online", "offline", "warm" or "error". * @count: unused variable. * * Returns: * -EACCES if enable hba reset not enabled * -EINVAL if the buffer does not contain a valid string (see above) * -EIO if lpfc_workq_post_event() or lpfc_do_offline() fails * buf length greater than zero indicates success **/ static ssize_t lpfc_board_mode_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { struct Scsi_Host *shost = class_to_shost(dev); struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata; struct lpfc_hba *phba = vport->phba; struct completion online_compl; char *board_mode_str = NULL; int status = 0; int rc; if (!phba->cfg_enable_hba_reset) { status = -EACCES; goto board_mode_out; } lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT, "3050 lpfc_board_mode set to %s\n", buf); init_completion(&online_compl); if(strncmp(buf, "online", sizeof("online") - 1) == 0) { rc = lpfc_workq_post_event(phba, &status, &online_compl, LPFC_EVT_ONLINE); if (rc == 0) { status = -ENOMEM; goto board_mode_out; } wait_for_completion(&online_compl); if (status) status = -EIO; } else if (strncmp(buf, "offline", sizeof("offline") - 1) == 0) status = lpfc_do_offline(phba, LPFC_EVT_OFFLINE); else if (strncmp(buf, "warm", sizeof("warm") - 1) == 0) if (phba->sli_rev == LPFC_SLI_REV4) status = -EINVAL; else status = lpfc_do_offline(phba, LPFC_EVT_WARM_START); else if (strncmp(buf, "error", sizeof("error") - 1) == 0) if (phba->sli_rev == LPFC_SLI_REV4) status = -EINVAL; else status = lpfc_do_offline(phba, LPFC_EVT_KILL); else if (strncmp(buf, "dump", sizeof("dump") - 1) == 0) status = lpfc_sli4_pdev_reg_request(phba, LPFC_FW_DUMP); else if (strncmp(buf, "fw_reset", sizeof("fw_reset") - 1) == 0) status = lpfc_sli4_pdev_reg_request(phba, LPFC_FW_RESET); else if (strncmp(buf, "dv_reset", sizeof("dv_reset") - 1) == 0) status = lpfc_sli4_pdev_reg_request(phba, LPFC_DV_RESET); else if (strncmp(buf, "pci_bus_reset", sizeof("pci_bus_reset") - 1) == 0) status = lpfc_reset_pci_bus(phba); else if (strncmp(buf, "heartbeat", sizeof("heartbeat") - 1) == 0) lpfc_issue_hb_tmo(phba); else if (strncmp(buf, "trunk", sizeof("trunk") - 1) == 0) status = lpfc_set_trunking(phba, (char *)buf + sizeof("trunk")); else status = -EINVAL; board_mode_out: if (!status) return strlen(buf); else { board_mode_str = strchr(buf, '\n'); if (board_mode_str) *board_mode_str = '\0'; lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT, "3097 Failed \"%s\", status(%d), " "fc_flag(x%lx)\n", buf, status, phba->pport->fc_flag); return status; } } /** * lpfc_get_hba_info - Return various bits of informaton about the adapter * @phba: pointer to the adapter structure. * @mxri: max xri count. * @axri: available xri count. * @mrpi: max rpi count. * @arpi: available rpi count. * @mvpi: max vpi count. * @avpi: available vpi count. * * Description: * If an integer pointer for an count is not null then the value for the * count is returned. * * Returns: * zero on error * one for success **/ static int lpfc_get_hba_info(struct lpfc_hba *phba, uint32_t *mxri, uint32_t *axri, uint32_t *mrpi, uint32_t *arpi, uint32_t *mvpi, uint32_t *avpi) { LPFC_MBOXQ_t *pmboxq; MAILBOX_t *pmb; int rc = 0; struct lpfc_sli4_hba *sli4_hba; struct lpfc_max_cfg_param *max_cfg_param; u16 rsrc_ext_cnt, rsrc_ext_size, max_vpi; /* * prevent udev from issuing mailbox commands until the port is * configured. */ if (phba->link_state < LPFC_LINK_DOWN || !phba->mbox_mem_pool || (phba->sli.sli_flag & LPFC_SLI_ACTIVE) == 0) return 0; if (phba->sli.sli_flag & LPFC_BLOCK_MGMT_IO) return 0; pmboxq = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); if (!pmboxq) return 0; memset(pmboxq, 0, sizeof (LPFC_MBOXQ_t)); pmb = &pmboxq->u.mb; pmb->mbxCommand = MBX_READ_CONFIG; pmb->mbxOwner = OWN_HOST; pmboxq->ctx_buf = NULL; if (test_bit(FC_OFFLINE_MODE, &phba->pport->fc_flag)) rc = MBX_NOT_FINISHED; else rc = lpfc_sli_issue_mbox_wait(phba, pmboxq, phba->fc_ratov * 2); if (rc != MBX_SUCCESS) { if (rc != MBX_TIMEOUT) mempool_free(pmboxq, phba->mbox_mem_pool); return 0; } if (phba->sli_rev == LPFC_SLI_REV4) { sli4_hba = &phba->sli4_hba; max_cfg_param = &sli4_hba->max_cfg_param; /* Normally, extents are not used */ if (!phba->sli4_hba.extents_in_use) { if (mrpi) *mrpi = max_cfg_param->max_rpi; if (mxri) *mxri = max_cfg_param->max_xri; if (mvpi) { max_vpi = max_cfg_param->max_vpi; /* Limit the max we support */ if (max_vpi > LPFC_MAX_VPI) max_vpi = LPFC_MAX_VPI; *mvpi = max_vpi; } } else { /* Extents in use */ if (mrpi) { if (lpfc_sli4_get_avail_extnt_rsrc(phba, LPFC_RSC_TYPE_FCOE_RPI, &rsrc_ext_cnt, &rsrc_ext_size)) { rc = 0; goto free_pmboxq; } *mrpi = rsrc_ext_cnt * rsrc_ext_size; } if (mxri) { if (lpfc_sli4_get_avail_extnt_rsrc(phba, LPFC_RSC_TYPE_FCOE_XRI, &rsrc_ext_cnt, &rsrc_ext_size)) { rc = 0; goto free_pmboxq; } *mxri = rsrc_ext_cnt * rsrc_ext_size; } if (mvpi) { if (lpfc_sli4_get_avail_extnt_rsrc(phba, LPFC_RSC_TYPE_FCOE_VPI, &rsrc_ext_cnt, &rsrc_ext_size)) { rc = 0; goto free_pmboxq; } max_vpi = rsrc_ext_cnt * rsrc_ext_size; /* Limit the max we support */ if (max_vpi > LPFC_MAX_VPI) max_vpi = LPFC_MAX_VPI; *mvpi = max_vpi; } } } else { if (mrpi) *mrpi = pmb->un.varRdConfig.max_rpi; if (arpi) *arpi = pmb->un.varRdConfig.avail_rpi; if (mxri) *mxri = pmb->un.varRdConfig.max_xri; if (axri) *axri = pmb->un.varRdConfig.avail_xri; if (mvpi) *mvpi = pmb->un.varRdConfig.max_vpi; if (avpi) { /* avail_vpi is only valid if link is up and ready */ if (phba->link_state == LPFC_HBA_READY) *avpi = pmb->un.varRdConfig.avail_vpi; else *avpi = pmb->un.varRdConfig.max_vpi; } } /* Success */ rc = 1; free_pmboxq: mempool_free(pmboxq, phba->mbox_mem_pool); return rc; } /** * lpfc_max_rpi_show - Return maximum rpi * @dev: class device that is converted into a Scsi_host. * @attr: device attribute, not used. * @buf: on return contains the maximum rpi count in decimal or "Unknown". * * Description: * Calls lpfc_get_hba_info() asking for just the mrpi count. * If lpfc_get_hba_info() returns zero (failure) the buffer text is set * to "Unknown" and the buffer length is returned, therefore the caller * must check for "Unknown" in the buffer to detect a failure. * * Returns: size of formatted string. **/ static ssize_t lpfc_max_rpi_show(struct device *dev, struct device_attribute *attr, char *buf) { struct Scsi_Host *shost = class_to_shost(dev); struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata; struct lpfc_hba *phba = vport->phba; uint32_t cnt; if (lpfc_get_hba_info(phba, NULL, NULL, &cnt, NULL, NULL, NULL)) return scnprintf(buf, PAGE_SIZE, "%d\n", cnt); return scnprintf(buf, PAGE_SIZE, "Unknown\n"); } /** * lpfc_used_rpi_show - Return maximum rpi minus available rpi * @dev: class device that is converted into a Scsi_host. * @attr: device attribute, not used. * @buf: containing the used rpi count in decimal or "Unknown". * * Description: * Calls lpfc_get_hba_info() asking for just the mrpi and arpi counts. * If lpfc_get_hba_info() returns zero (failure) the buffer text is set * to "Unknown" and the buffer length is returned, therefore the caller * must check for "Unknown" in the buffer to detect a failure. * * Returns: size of formatted string. **/ static ssize_t lpfc_used_rpi_show(struct device *dev, struct device_attribute *attr, char *buf) { struct Scsi_Host *shost = class_to_shost(dev); struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata; struct lpfc_hba *phba = vport->phba; struct lpfc_sli4_hba *sli4_hba; struct lpfc_max_cfg_param *max_cfg_param; u32 cnt = 0, acnt = 0; if (phba->sli_rev == LPFC_SLI_REV4) { sli4_hba = &phba->sli4_hba; max_cfg_param = &sli4_hba->max_cfg_param; return scnprintf(buf, PAGE_SIZE, "%d\n", max_cfg_param->rpi_used); } else { if (lpfc_get_hba_info(phba, NULL, NULL, &cnt, &acnt, NULL, NULL)) return scnprintf(buf, PAGE_SIZE, "%d\n", (cnt - acnt)); } return scnprintf(buf, PAGE_SIZE, "Unknown\n"); } /** * lpfc_max_xri_show - Return maximum xri * @dev: class device that is converted into a Scsi_host. * @attr: device attribute, not used. * @buf: on return contains the maximum xri count in decimal or "Unknown". * * Description: * Calls lpfc_get_hba_info() asking for just the mrpi count. * If lpfc_get_hba_info() returns zero (failure) the buffer text is set * to "Unknown" and the buffer length is returned, therefore the caller * must check for "Unknown" in the buffer to detect a failure. * * Returns: size of formatted string. **/ static ssize_t lpfc_max_xri_show(struct device *dev, struct device_attribute *attr, char *buf) { struct Scsi_Host *shost = class_to_shost(dev); struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata; struct lpfc_hba *phba = vport->phba; uint32_t cnt; if (lpfc_get_hba_info(phba, &cnt, NULL, NULL, NULL, NULL, NULL)) return scnprintf(buf, PAGE_SIZE, "%d\n", cnt); return scnprintf(buf, PAGE_SIZE, "Unknown\n"); } /** * lpfc_used_xri_show - Return maximum xpi minus the available xpi * @dev: class device that is converted into a Scsi_host. * @attr: device attribute, not used. * @buf: on return contains the used xri count in decimal or "Unknown". * * Description: * Calls lpfc_get_hba_info() asking for just the mxri and axri counts. * If lpfc_get_hba_info() returns zero (failure) the buffer text is set * to "Unknown" and the buffer length is returned, therefore the caller * must check for "Unknown" in the buffer to detect a failure. * * Returns: size of formatted string. **/ static ssize_t lpfc_used_xri_show(struct device *dev, struct device_attribute *attr, char *buf) { struct Scsi_Host *shost = class_to_shost(dev); struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata; struct lpfc_hba *phba = vport->phba; struct lpfc_sli4_hba *sli4_hba; struct lpfc_max_cfg_param *max_cfg_param; u32 cnt = 0, acnt = 0; if (phba->sli_rev == LPFC_SLI_REV4) { sli4_hba = &phba->sli4_hba; max_cfg_param = &sli4_hba->max_cfg_param; return scnprintf(buf, PAGE_SIZE, "%d\n", max_cfg_param->xri_used); } else { if (lpfc_get_hba_info(phba, &cnt, &acnt, NULL, NULL, NULL, NULL)) return scnprintf(buf, PAGE_SIZE, "%d\n", (cnt - acnt)); } return scnprintf(buf, PAGE_SIZE, "Unknown\n"); } /** * lpfc_max_vpi_show - Return maximum vpi * @dev: class device that is converted into a Scsi_host. * @attr: device attribute, not used. * @buf: on return contains the maximum vpi count in decimal or "Unknown". * * Description: * Calls lpfc_get_hba_info() asking for just the mvpi count. * If lpfc_get_hba_info() returns zero (failure) the buffer text is set * to "Unknown" and the buffer length is returned, therefore the caller * must check for "Unknown" in the buffer to detect a failure. * * Returns: size of formatted string. **/ static ssize_t lpfc_max_vpi_show(struct device *dev, struct device_attribute *attr, char *buf) { struct Scsi_Host *shost = class_to_shost(dev); struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata; struct lpfc_hba *phba = vport->phba; uint32_t cnt; if (lpfc_get_hba_info(phba, NULL, NULL, NULL, NULL, &cnt, NULL)) return scnprintf(buf, PAGE_SIZE, "%d\n", cnt); return scnprintf(buf, PAGE_SIZE, "Unknown\n"); } /** * lpfc_used_vpi_show - Return maximum vpi minus the available vpi * @dev: class device that is converted into a Scsi_host. * @attr: device attribute, not used. * @buf: on return contains the used vpi count in decimal or "Unknown". * * Description: * Calls lpfc_get_hba_info() asking for just the mvpi and avpi counts. * If lpfc_get_hba_info() returns zero (failure) the buffer text is set * to "Unknown" and the buffer length is returned, therefore the caller * must check for "Unknown" in the buffer to detect a failure. * * Returns: size of formatted string. **/ static ssize_t lpfc_used_vpi_show(struct device *dev, struct device_attribute *attr, char *buf) { struct Scsi_Host *shost = class_to_shost(dev); struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata; struct lpfc_hba *phba = vport->phba; struct lpfc_sli4_hba *sli4_hba; struct lpfc_max_cfg_param *max_cfg_param; u32 cnt = 0, acnt = 0; if (phba->sli_rev == LPFC_SLI_REV4) { sli4_hba = &phba->sli4_hba; max_cfg_param = &sli4_hba->max_cfg_param; return scnprintf(buf, PAGE_SIZE, "%d\n", max_cfg_param->vpi_used); } else { if (lpfc_get_hba_info(phba, NULL, NULL, NULL, NULL, &cnt, &acnt)) return scnprintf(buf, PAGE_SIZE, "%d\n", (cnt - acnt)); } return scnprintf(buf, PAGE_SIZE, "Unknown\n"); } /** * lpfc_npiv_info_show - Return text about NPIV support for the adapter * @dev: class device that is converted into a Scsi_host. * @attr: device attribute, not used. * @buf: text that must be interpreted to determine if npiv is supported. * * Description: * Buffer will contain text indicating npiv is not suppoerted on the port, * the port is an NPIV physical port, or it is an npiv virtual port with * the id of the vport. * * Returns: size of formatted string. **/ static ssize_t lpfc_npiv_info_show(struct device *dev, struct device_attribute *attr, char *buf) { struct Scsi_Host *shost = class_to_shost(dev); struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata; struct lpfc_hba *phba = vport->phba; if (!(phba->max_vpi)) return scnprintf(buf, PAGE_SIZE, "NPIV Not Supported\n"); if (vport->port_type == LPFC_PHYSICAL_PORT) return scnprintf(buf, PAGE_SIZE, "NPIV Physical\n"); return scnprintf(buf, PAGE_SIZE, "NPIV Virtual (VPI %d)\n", vport->vpi); } /** * lpfc_poll_show - Return text about poll support for the adapter * @dev: class device that is converted into a Scsi_host. * @attr: device attribute, not used. * @buf: on return contains the cfg_poll in hex. * * Notes: * cfg_poll should be a lpfc_polling_flags type. * * Returns: size of formatted string. **/ static ssize_t lpfc_poll_show(struct device *dev, struct device_attribute *attr, char *buf) { struct Scsi_Host *shost = class_to_shost(dev); struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata; struct lpfc_hba *phba = vport->phba; return scnprintf(buf, PAGE_SIZE, "%#x\n", phba->cfg_poll); } /** * lpfc_poll_store - Set the value of cfg_poll for the adapter * @dev: class device that is converted into a Scsi_host. * @attr: device attribute, not used. * @buf: one or more lpfc_polling_flags values. * @count: not used. * * Notes: * buf contents converted to integer and checked for a valid value. * * Returns: * -EINVAL if the buffer connot be converted or is out of range * length of the buf on success **/ static ssize_t lpfc_poll_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { struct Scsi_Host *shost = class_to_shost(dev); struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata; struct lpfc_hba *phba = vport->phba; uint32_t creg_val; uint32_t old_val; int val=0; if (!isdigit(buf[0])) return -EINVAL; if (sscanf(buf, "%i", &val) != 1) return -EINVAL; if ((val & 0x3) != val) return -EINVAL; if (phba->sli_rev == LPFC_SLI_REV4) val = 0; lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT, "3051 lpfc_poll changed from %d to %d\n", phba->cfg_poll, val); spin_lock_irq(&phba->hbalock); old_val = phba->cfg_poll; if (val & ENABLE_FCP_RING_POLLING) { if ((val & DISABLE_FCP_RING_INT) && !(old_val & DISABLE_FCP_RING_INT)) { if (lpfc_readl(phba->HCregaddr, &creg_val)) { spin_unlock_irq(&phba->hbalock); return -EINVAL; } creg_val &= ~(HC_R0INT_ENA << LPFC_FCP_RING); writel(creg_val, phba->HCregaddr); readl(phba->HCregaddr); /* flush */ lpfc_poll_start_timer(phba); } } else if (val != 0x0) { spin_unlock_irq(&phba->hbalock); return -EINVAL; } if (!(val & DISABLE_FCP_RING_INT) && (old_val & DISABLE_FCP_RING_INT)) { spin_unlock_irq(&phba->hbalock); del_timer(&phba->fcp_poll_timer); spin_lock_irq(&phba->hbalock); if (lpfc_readl(phba->HCregaddr, &creg_val)) { spin_unlock_irq(&phba->hbalock); return -EINVAL; } creg_val |= (HC_R0INT_ENA << LPFC_FCP_RING); writel(creg_val, phba->HCregaddr); readl(phba->HCregaddr); /* flush */ } phba->cfg_poll = val; spin_unlock_irq(&phba->hbalock); return strlen(buf); } /** * lpfc_sriov_hw_max_virtfn_show - Return maximum number of virtual functions * @dev: class converted to a Scsi_host structure. * @attr: device attribute, not used. * @buf: on return contains the formatted support level. * * Description: * Returns the maximum number of virtual functions a physical function can * support, 0 will be returned if called on virtual function. * * Returns: size of formatted string. **/ static ssize_t lpfc_sriov_hw_max_virtfn_show(struct device *dev, struct device_attribute *attr, char *buf) { struct Scsi_Host *shost = class_to_shost(dev); struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata; struct lpfc_hba *phba = vport->phba; uint16_t max_nr_virtfn; max_nr_virtfn = lpfc_sli_sriov_nr_virtfn_get(phba); return scnprintf(buf, PAGE_SIZE, "%d\n", max_nr_virtfn); } /** * lpfc_enable_bbcr_set: Sets an attribute value. * @phba: pointer to the adapter structure. * @val: integer attribute value. * * Description: * Validates the min and max values then sets the * adapter config field if in the valid range. prints error message * and does not set the parameter if invalid. * * Returns: * zero on success * -EINVAL if val is invalid */ static ssize_t lpfc_enable_bbcr_set(struct lpfc_hba *phba, uint val) { if (lpfc_rangecheck(val, 0, 1) && phba->sli_rev == LPFC_SLI_REV4) { lpfc_printf_log(phba, KERN_ERR, LOG_INIT, "3068 lpfc_enable_bbcr changed from %d to " "%d\n", phba->cfg_enable_bbcr, val); phba->cfg_enable_bbcr = val; return 0; } lpfc_printf_log(phba, KERN_ERR, LOG_INIT, "0451 lpfc_enable_bbcr cannot set to %d, range is 0, " "1\n", val); return -EINVAL; } /* * lpfc_param_show - Return a cfg attribute value in decimal * * Description: * Macro that given an attr e.g. hba_queue_depth expands * into a function with the name lpfc_hba_queue_depth_show. * * lpfc_##attr##_show: Return the decimal value of an adapters cfg_xxx field. * @dev: class device that is converted into a Scsi_host. * @attr: device attribute, not used. * @buf: on return contains the attribute value in decimal. * * Returns: size of formatted string. **/ #define lpfc_param_show(attr) \ static ssize_t \ lpfc_##attr##_show(struct device *dev, struct device_attribute *attr, \ char *buf) \ { \ struct Scsi_Host *shost = class_to_shost(dev);\ struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;\ struct lpfc_hba *phba = vport->phba;\ return scnprintf(buf, PAGE_SIZE, "%d\n",\ phba->cfg_##attr);\ } /* * lpfc_param_hex_show - Return a cfg attribute value in hex * * Description: * Macro that given an attr e.g. hba_queue_depth expands * into a function with the name lpfc_hba_queue_depth_show * * lpfc_##attr##_show: Return the hex value of an adapters cfg_xxx field. * @dev: class device that is converted into a Scsi_host. * @attr: device attribute, not used. * @buf: on return contains the attribute value in hexadecimal. * * Returns: size of formatted string. **/ #define lpfc_param_hex_show(attr) \ static ssize_t \ lpfc_##attr##_show(struct device *dev, struct device_attribute *attr, \ char *buf) \ { \ struct Scsi_Host *shost = class_to_shost(dev);\ struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;\ struct lpfc_hba *phba = vport->phba;\ uint val = 0;\ val = phba->cfg_##attr;\ return scnprintf(buf, PAGE_SIZE, "%#x\n",\ phba->cfg_##attr);\ } /* * lpfc_param_init - Initializes a cfg attribute * * Description: * Macro that given an attr e.g. hba_queue_depth expands * into a function with the name lpfc_hba_queue_depth_init. The macro also * takes a default argument, a minimum and maximum argument. * * lpfc_##attr##_init: Initializes an attribute. * @phba: pointer to the adapter structure. * @val: integer attribute value. * * Validates the min and max values then sets the adapter config field * accordingly, or uses the default if out of range and prints an error message. * * Returns: * zero on success * -EINVAL if default used **/ #define lpfc_param_init(attr, default, minval, maxval) \ static int \ lpfc_##attr##_init(struct lpfc_hba *phba, uint val) \ { \ if (lpfc_rangecheck(val, minval, maxval)) {\ phba->cfg_##attr = val;\ return 0;\ }\ lpfc_printf_log(phba, KERN_ERR, LOG_INIT, \ "0449 lpfc_"#attr" attribute cannot be set to %d, "\ "allowed range is ["#minval", "#maxval"]\n", val); \ phba->cfg_##attr = default;\ return -EINVAL;\ } /* * lpfc_param_set - Set a cfg attribute value * * Description: * Macro that given an attr e.g. hba_queue_depth expands * into a function with the name lpfc_hba_queue_depth_set * * lpfc_##attr##_set: Sets an attribute value. * @phba: pointer to the adapter structure. * @val: integer attribute value. * * Description: * Validates the min and max values then sets the * adapter config field if in the valid range. prints error message * and does not set the parameter if invalid. * * Returns: * zero on success * -EINVAL if val is invalid **/ #define lpfc_param_set(attr, default, minval, maxval) \ static int \ lpfc_##attr##_set(struct lpfc_hba *phba, uint val) \ { \ if (lpfc_rangecheck(val, minval, maxval)) {\ lpfc_printf_log(phba, KERN_ERR, LOG_INIT, \ "3052 lpfc_" #attr " changed from %d to %d\n", \ phba->cfg_##attr, val); \ phba->cfg_##attr = val;\ return 0;\ }\ lpfc_printf_log(phba, KERN_ERR, LOG_INIT, \ "0450 lpfc_"#attr" attribute cannot be set to %d, "\ "allowed range is ["#minval", "#maxval"]\n", val); \ return -EINVAL;\ } /* * lpfc_param_store - Set a vport attribute value * * Description: * Macro that given an attr e.g. hba_queue_depth expands * into a function with the name lpfc_hba_queue_depth_store. * * lpfc_##attr##_store: Set an sttribute value. * @dev: class device that is converted into a Scsi_host. * @attr: device attribute, not used. * @buf: contains the attribute value in ascii. * @count: not used. * * Description: * Convert the ascii text number to an integer, then * use the lpfc_##attr##_set function to set the value. * * Returns: * -EINVAL if val is invalid or lpfc_##attr##_set() fails * length of buffer upon success. **/ #define lpfc_param_store(attr) \ static ssize_t \ lpfc_##attr##_store(struct device *dev, struct device_attribute *attr, \ const char *buf, size_t count) \ { \ struct Scsi_Host *shost = class_to_shost(dev);\ struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;\ struct lpfc_hba *phba = vport->phba;\ uint val = 0;\ if (!isdigit(buf[0]))\ return -EINVAL;\ if (sscanf(buf, "%i", &val) != 1)\ return -EINVAL;\ if (lpfc_##attr##_set(phba, val) == 0) \ return strlen(buf);\ else \ return -EINVAL;\ } /* * lpfc_vport_param_show - Return decimal formatted cfg attribute value * * Description: * Macro that given an attr e.g. hba_queue_depth expands * into a function with the name lpfc_hba_queue_depth_show * * lpfc_##attr##_show: prints the attribute value in decimal. * @dev: class device that is converted into a Scsi_host. * @attr: device attribute, not used. * @buf: on return contains the attribute value in decimal. * * Returns: length of formatted string. **/ #define lpfc_vport_param_show(attr) \ static ssize_t \ lpfc_##attr##_show(struct device *dev, struct device_attribute *attr, \ char *buf) \ { \ struct Scsi_Host *shost = class_to_shost(dev);\ struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;\ return scnprintf(buf, PAGE_SIZE, "%d\n", vport->cfg_##attr);\ } /* * lpfc_vport_param_hex_show - Return hex formatted attribute value * * Description: * Macro that given an attr e.g. * hba_queue_depth expands into a function with the name * lpfc_hba_queue_depth_show * * lpfc_##attr##_show: prints the attribute value in hexadecimal. * @dev: class device that is converted into a Scsi_host. * @attr: device attribute, not used. * @buf: on return contains the attribute value in hexadecimal. * * Returns: length of formatted string. **/ #define lpfc_vport_param_hex_show(attr) \ static ssize_t \ lpfc_##attr##_show(struct device *dev, struct device_attribute *attr, \ char *buf) \ { \ struct Scsi_Host *shost = class_to_shost(dev);\ struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;\ return scnprintf(buf, PAGE_SIZE, "%#x\n", vport->cfg_##attr);\ } /* * lpfc_vport_param_init - Initialize a vport cfg attribute * * Description: * Macro that given an attr e.g. hba_queue_depth expands * into a function with the name lpfc_hba_queue_depth_init. The macro also * takes a default argument, a minimum and maximum argument. * * lpfc_##attr##_init: validates the min and max values then sets the * adapter config field accordingly, or uses the default if out of range * and prints an error message. * @phba: pointer to the adapter structure. * @val: integer attribute value. * * Returns: * zero on success * -EINVAL if default used **/ #define lpfc_vport_param_init(attr, default, minval, maxval) \ static int \ lpfc_##attr##_init(struct lpfc_vport *vport, uint val) \ { \ if (lpfc_rangecheck(val, minval, maxval)) {\ vport->cfg_##attr = val;\ return 0;\ }\ lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT, \ "0423 lpfc_"#attr" attribute cannot be set to %d, "\ "allowed range is ["#minval", "#maxval"]\n", val); \ vport->cfg_##attr = default;\ return -EINVAL;\ } /* * lpfc_vport_param_set - Set a vport cfg attribute * * Description: * Macro that given an attr e.g. hba_queue_depth expands * into a function with the name lpfc_hba_queue_depth_set * * lpfc_##attr##_set: validates the min and max values then sets the * adapter config field if in the valid range. prints error message * and does not set the parameter if invalid. * @phba: pointer to the adapter structure. * @val: integer attribute value. * * Returns: * zero on success * -EINVAL if val is invalid **/ #define lpfc_vport_param_set(attr, default, minval, maxval) \ static int \ lpfc_##attr##_set(struct lpfc_vport *vport, uint val) \ { \ if (lpfc_rangecheck(val, minval, maxval)) {\ lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT, \ "3053 lpfc_" #attr \ " changed from %d (x%x) to %d (x%x)\n", \ vport->cfg_##attr, vport->cfg_##attr, \ val, val); \ vport->cfg_##attr = val;\ return 0;\ }\ lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT, \ "0424 lpfc_"#attr" attribute cannot be set to %d, "\ "allowed range is ["#minval", "#maxval"]\n", val); \ return -EINVAL;\ } /* * lpfc_vport_param_store - Set a vport attribute * * Description: * Macro that given an attr e.g. hba_queue_depth * expands into a function with the name lpfc_hba_queue_depth_store * * lpfc_##attr##_store: convert the ascii text number to an integer, then * use the lpfc_##attr##_set function to set the value. * @cdev: class device that is converted into a Scsi_host. * @buf: contains the attribute value in decimal. * @count: not used. * * Returns: * -EINVAL if val is invalid or lpfc_##attr##_set() fails * length of buffer upon success. **/ #define lpfc_vport_param_store(attr) \ static ssize_t \ lpfc_##attr##_store(struct device *dev, struct device_attribute *attr, \ const char *buf, size_t count) \ { \ struct Scsi_Host *shost = class_to_shost(dev);\ struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;\ uint val = 0;\ if (!isdigit(buf[0]))\ return -EINVAL;\ if (sscanf(buf, "%i", &val) != 1)\ return -EINVAL;\ if (lpfc_##attr##_set(vport, val) == 0) \ return strlen(buf);\ else \ return -EINVAL;\ } static DEVICE_ATTR(nvme_info, 0444, lpfc_nvme_info_show, NULL); static DEVICE_ATTR(scsi_stat, 0444, lpfc_scsi_stat_show, NULL); static DEVICE_ATTR(bg_info, S_IRUGO, lpfc_bg_info_show, NULL); static DEVICE_ATTR(bg_guard_err, S_IRUGO, lpfc_bg_guard_err_show, NULL); static DEVICE_ATTR(bg_apptag_err, S_IRUGO, lpfc_bg_apptag_err_show, NULL); static DEVICE_ATTR(bg_reftag_err, S_IRUGO, lpfc_bg_reftag_err_show, NULL); static DEVICE_ATTR(info, S_IRUGO, lpfc_info_show, NULL); static DEVICE_ATTR(serialnum, S_IRUGO, lpfc_serialnum_show, NULL); static DEVICE_ATTR(modeldesc, S_IRUGO, lpfc_modeldesc_show, NULL); static DEVICE_ATTR(modelname, S_IRUGO, lpfc_modelname_show, NULL); static DEVICE_ATTR(programtype, S_IRUGO, lpfc_programtype_show, NULL); static DEVICE_ATTR(portnum, S_IRUGO, lpfc_vportnum_show, NULL); static DEVICE_ATTR(fwrev, S_IRUGO, lpfc_fwrev_show, NULL); static DEVICE_ATTR(hdw, S_IRUGO, lpfc_hdw_show, NULL); static DEVICE_ATTR(link_state, S_IRUGO | S_IWUSR, lpfc_link_state_show, lpfc_link_state_store); static DEVICE_ATTR(option_rom_version, S_IRUGO, lpfc_option_rom_version_show, NULL); static DEVICE_ATTR(num_discovered_ports, S_IRUGO, lpfc_num_discovered_ports_show, NULL); static DEVICE_ATTR(nport_evt_cnt, S_IRUGO, lpfc_nport_evt_cnt_show, NULL); static DEVICE_ATTR_RO(lpfc_drvr_version); static DEVICE_ATTR_RO(lpfc_enable_fip); static DEVICE_ATTR(board_mode, S_IRUGO | S_IWUSR, lpfc_board_mode_show, lpfc_board_mode_store); static DEVICE_ATTR_RO(lpfc_xcvr_data); static DEVICE_ATTR(issue_reset, S_IWUSR, NULL, lpfc_issue_reset); static DEVICE_ATTR(max_vpi, S_IRUGO, lpfc_max_vpi_show, NULL); static DEVICE_ATTR(used_vpi, S_IRUGO, lpfc_used_vpi_show, NULL); static DEVICE_ATTR(max_rpi, S_IRUGO, lpfc_max_rpi_show, NULL); static DEVICE_ATTR(used_rpi, S_IRUGO, lpfc_used_rpi_show, NULL); static DEVICE_ATTR(max_xri, S_IRUGO, lpfc_max_xri_show, NULL); static DEVICE_ATTR(used_xri, S_IRUGO, lpfc_used_xri_show, NULL); static DEVICE_ATTR(npiv_info, S_IRUGO, lpfc_npiv_info_show, NULL); static DEVICE_ATTR_RO(lpfc_temp_sensor); static DEVICE_ATTR_RO(lpfc_sriov_hw_max_virtfn); static DEVICE_ATTR(protocol, S_IRUGO, lpfc_sli4_protocol_show, NULL); static DEVICE_ATTR(lpfc_xlane_supported, S_IRUGO, lpfc_oas_supported_show, NULL); static DEVICE_ATTR(cmf_info, 0444, lpfc_cmf_info_show, NULL); #define WWN_SZ 8 /** * lpfc_wwn_set - Convert string to the 8 byte WWN value. * @buf: WWN string. * @cnt: Length of string. * @wwn: Array to receive converted wwn value. * * Returns: * -EINVAL if the buffer does not contain a valid wwn * 0 success **/ static size_t lpfc_wwn_set(const char *buf, size_t cnt, char wwn[]) { unsigned int i, j; /* Count may include a LF at end of string */ if (buf[cnt-1] == '\n') cnt--; if ((cnt < 16) || (cnt > 18) || ((cnt == 17) && (*buf++ != 'x')) || ((cnt == 18) && ((*buf++ != '0') || (*buf++ != 'x')))) return -EINVAL; memset(wwn, 0, WWN_SZ); /* Validate and store the new name */ for (i = 0, j = 0; i < 16; i++) { if ((*buf >= 'a') && (*buf <= 'f')) j = ((j << 4) | ((*buf++ - 'a') + 10)); else if ((*buf >= 'A') && (*buf <= 'F')) j = ((j << 4) | ((*buf++ - 'A') + 10)); else if ((*buf >= '0') && (*buf <= '9')) j = ((j << 4) | (*buf++ - '0')); else return -EINVAL; if (i % 2) { wwn[i/2] = j & 0xff; j = 0; } } return 0; } /** * lpfc_oas_tgt_show - Return wwpn of target whose luns maybe enabled for * Optimized Access Storage (OAS) operations. * @dev: class device that is converted into a Scsi_host. * @attr: device attribute, not used. * @buf: buffer for passing information. * * Returns: * value of count **/ static ssize_t lpfc_oas_tgt_show(struct device *dev, struct device_attribute *attr, char *buf) { struct Scsi_Host *shost = class_to_shost(dev); struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba; return scnprintf(buf, PAGE_SIZE, "0x%llx\n", wwn_to_u64(phba->cfg_oas_tgt_wwpn)); } /** * lpfc_oas_tgt_store - Store wwpn of target whose luns maybe enabled for * Optimized Access Storage (OAS) operations. * @dev: class device that is converted into a Scsi_host. * @attr: device attribute, not used. * @buf: buffer for passing information. * @count: Size of the data buffer. * * Returns: * -EINVAL count is invalid, invalid wwpn byte invalid * -EPERM oas is not supported by hba * value of count on success **/ static ssize_t lpfc_oas_tgt_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { struct Scsi_Host *shost = class_to_shost(dev); struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba; unsigned int cnt = count; uint8_t wwpn[WWN_SZ]; int rc; if (!phba->cfg_fof) return -EPERM; /* count may include a LF at end of string */ if (buf[cnt-1] == '\n') cnt--; rc = lpfc_wwn_set(buf, cnt, wwpn); if (rc) return rc; memcpy(phba->cfg_oas_tgt_wwpn, wwpn, (8 * sizeof(uint8_t))); memcpy(phba->sli4_hba.oas_next_tgt_wwpn, wwpn, (8 * sizeof(uint8_t))); if (wwn_to_u64(wwpn) == 0) phba->cfg_oas_flags |= OAS_FIND_ANY_TARGET; else phba->cfg_oas_flags &= ~OAS_FIND_ANY_TARGET; phba->cfg_oas_flags &= ~OAS_LUN_VALID; phba->sli4_hba.oas_next_lun = FIND_FIRST_OAS_LUN; return count; } static DEVICE_ATTR(lpfc_xlane_tgt, S_IRUGO | S_IWUSR, lpfc_oas_tgt_show, lpfc_oas_tgt_store); /** * lpfc_oas_priority_show - Return wwpn of target whose luns maybe enabled for * Optimized Access Storage (OAS) operations. * @dev: class device that is converted into a Scsi_host. * @attr: device attribute, not used. * @buf: buffer for passing information. * * Returns: * value of count **/ static ssize_t lpfc_oas_priority_show(struct device *dev, struct device_attribute *attr, char *buf) { struct Scsi_Host *shost = class_to_shost(dev); struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba; return scnprintf(buf, PAGE_SIZE, "%d\n", phba->cfg_oas_priority); } /** * lpfc_oas_priority_store - Store wwpn of target whose luns maybe enabled for * Optimized Access Storage (OAS) operations. * @dev: class device that is converted into a Scsi_host. * @attr: device attribute, not used. * @buf: buffer for passing information. * @count: Size of the data buffer. * * Returns: * -EINVAL count is invalid, invalid wwpn byte invalid * -EPERM oas is not supported by hba * value of count on success **/ static ssize_t lpfc_oas_priority_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { struct Scsi_Host *shost = class_to_shost(dev); struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba; unsigned int cnt = count; unsigned long val; int ret; if (!phba->cfg_fof) return -EPERM; /* count may include a LF at end of string */ if (buf[cnt-1] == '\n') cnt--; ret = kstrtoul(buf, 0, &val); if (ret || (val > 0x7f)) return -EINVAL; if (val) phba->cfg_oas_priority = (uint8_t)val; else phba->cfg_oas_priority = phba->cfg_XLanePriority; return count; } static DEVICE_ATTR(lpfc_xlane_priority, S_IRUGO | S_IWUSR, lpfc_oas_priority_show, lpfc_oas_priority_store); /** * lpfc_oas_vpt_show - Return wwpn of vport whose targets maybe enabled * for Optimized Access Storage (OAS) operations. * @dev: class device that is converted into a Scsi_host. * @attr: device attribute, not used. * @buf: buffer for passing information. * * Returns: * value of count on success **/ static ssize_t lpfc_oas_vpt_show(struct device *dev, struct device_attribute *attr, char *buf) { struct Scsi_Host *shost = class_to_shost(dev); struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba; return scnprintf(buf, PAGE_SIZE, "0x%llx\n", wwn_to_u64(phba->cfg_oas_vpt_wwpn)); } /** * lpfc_oas_vpt_store - Store wwpn of vport whose targets maybe enabled * for Optimized Access Storage (OAS) operations. * @dev: class device that is converted into a Scsi_host. * @attr: device attribute, not used. * @buf: buffer for passing information. * @count: Size of the data buffer. * * Returns: * -EINVAL count is invalid, invalid wwpn byte invalid * -EPERM oas is not supported by hba * value of count on success **/ static ssize_t lpfc_oas_vpt_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { struct Scsi_Host *shost = class_to_shost(dev); struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba; unsigned int cnt = count; uint8_t wwpn[WWN_SZ]; int rc; if (!phba->cfg_fof) return -EPERM; /* count may include a LF at end of string */ if (buf[cnt-1] == '\n') cnt--; rc = lpfc_wwn_set(buf, cnt, wwpn); if (rc) return rc; memcpy(phba->cfg_oas_vpt_wwpn, wwpn, (8 * sizeof(uint8_t))); memcpy(phba->sli4_hba.oas_next_vpt_wwpn, wwpn, (8 * sizeof(uint8_t))); if (wwn_to_u64(wwpn) == 0) phba->cfg_oas_flags |= OAS_FIND_ANY_VPORT; else phba->cfg_oas_flags &= ~OAS_FIND_ANY_VPORT; phba->cfg_oas_flags &= ~OAS_LUN_VALID; if (phba->cfg_oas_priority == 0) phba->cfg_oas_priority = phba->cfg_XLanePriority; phba->sli4_hba.oas_next_lun = FIND_FIRST_OAS_LUN; return count; } static DEVICE_ATTR(lpfc_xlane_vpt, S_IRUGO | S_IWUSR, lpfc_oas_vpt_show, lpfc_oas_vpt_store); /** * lpfc_oas_lun_state_show - Return the current state (enabled or disabled) * of whether luns will be enabled or disabled * for Optimized Access Storage (OAS) operations. * @dev: class device that is converted into a Scsi_host. * @attr: device attribute, not used. * @buf: buffer for passing information. * * Returns: * size of formatted string. **/ static ssize_t lpfc_oas_lun_state_show(struct device *dev, struct device_attribute *attr, char *buf) { struct Scsi_Host *shost = class_to_shost(dev); struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba; return scnprintf(buf, PAGE_SIZE, "%d\n", phba->cfg_oas_lun_state); } /** * lpfc_oas_lun_state_store - Store the state (enabled or disabled) * of whether luns will be enabled or disabled * for Optimized Access Storage (OAS) operations. * @dev: class device that is converted into a Scsi_host. * @attr: device attribute, not used. * @buf: buffer for passing information. * @count: Size of the data buffer. * * Returns: * -EINVAL count is invalid, invalid wwpn byte invalid * -EPERM oas is not supported by hba * value of count on success **/ static ssize_t lpfc_oas_lun_state_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { struct Scsi_Host *shost = class_to_shost(dev); struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba; int val = 0; if (!phba->cfg_fof) return -EPERM; if (!isdigit(buf[0])) return -EINVAL; if (sscanf(buf, "%i", &val) != 1) return -EINVAL; if ((val != 0) && (val != 1)) return -EINVAL; phba->cfg_oas_lun_state = val; return strlen(buf); } static DEVICE_ATTR(lpfc_xlane_lun_state, S_IRUGO | S_IWUSR, lpfc_oas_lun_state_show, lpfc_oas_lun_state_store); /** * lpfc_oas_lun_status_show - Return the status of the Optimized Access * Storage (OAS) lun returned by the * lpfc_oas_lun_show function. * @dev: class device that is converted into a Scsi_host. * @attr: device attribute, not used. * @buf: buffer for passing information. * * Returns: * size of formatted string. **/ static ssize_t lpfc_oas_lun_status_show(struct device *dev, struct device_attribute *attr, char *buf) { struct Scsi_Host *shost = class_to_shost(dev); struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba; if (!(phba->cfg_oas_flags & OAS_LUN_VALID)) return -EFAULT; return scnprintf(buf, PAGE_SIZE, "%d\n", phba->cfg_oas_lun_status); } static DEVICE_ATTR(lpfc_xlane_lun_status, S_IRUGO, lpfc_oas_lun_status_show, NULL); /** * lpfc_oas_lun_state_set - enable or disable a lun for Optimized Access Storage * (OAS) operations. * @phba: lpfc_hba pointer. * @vpt_wwpn: wwpn of the vport associated with the returned lun * @tgt_wwpn: wwpn of the target associated with the returned lun * @lun: the fc lun for setting oas state. * @oas_state: the oas state to be set to the lun. * @pri: priority * * Returns: * SUCCESS : 0 * -EPERM OAS is not enabled or not supported by this port. * */ static size_t lpfc_oas_lun_state_set(struct lpfc_hba *phba, uint8_t vpt_wwpn[], uint8_t tgt_wwpn[], uint64_t lun, uint32_t oas_state, uint8_t pri) { int rc = 0; if (!phba->cfg_fof) return -EPERM; if (oas_state) { if (!lpfc_enable_oas_lun(phba, (struct lpfc_name *)vpt_wwpn, (struct lpfc_name *)tgt_wwpn, lun, pri)) rc = -ENOMEM; } else { lpfc_disable_oas_lun(phba, (struct lpfc_name *)vpt_wwpn, (struct lpfc_name *)tgt_wwpn, lun, pri); } return rc; } /** * lpfc_oas_lun_get_next - get the next lun that has been enabled for Optimized * Access Storage (OAS) operations. * @phba: lpfc_hba pointer. * @vpt_wwpn: wwpn of the vport associated with the returned lun * @tgt_wwpn: wwpn of the target associated with the returned lun * @lun_status: status of the lun returned lun * @lun_pri: priority of the lun returned lun * * Returns the first or next lun enabled for OAS operations for the vport/target * specified. If a lun is found, its vport wwpn, target wwpn and status is * returned. If the lun is not found, NOT_OAS_ENABLED_LUN is returned. * * Return: * lun that is OAS enabled for the vport/target * NOT_OAS_ENABLED_LUN when no oas enabled lun found. */ static uint64_t lpfc_oas_lun_get_next(struct lpfc_hba *phba, uint8_t vpt_wwpn[], uint8_t tgt_wwpn[], uint32_t *lun_status, uint32_t *lun_pri) { uint64_t found_lun; if (unlikely(!phba) || !vpt_wwpn || !tgt_wwpn) return NOT_OAS_ENABLED_LUN; if (lpfc_find_next_oas_lun(phba, (struct lpfc_name *) phba->sli4_hba.oas_next_vpt_wwpn, (struct lpfc_name *) phba->sli4_hba.oas_next_tgt_wwpn, &phba->sli4_hba.oas_next_lun, (struct lpfc_name *)vpt_wwpn, (struct lpfc_name *)tgt_wwpn, &found_lun, lun_status, lun_pri)) return found_lun; else return NOT_OAS_ENABLED_LUN; } /** * lpfc_oas_lun_state_change - enable/disable a lun for OAS operations * @phba: lpfc_hba pointer. * @vpt_wwpn: vport wwpn by reference. * @tgt_wwpn: target wwpn by reference. * @lun: the fc lun for setting oas state. * @oas_state: the oas state to be set to the oas_lun. * @pri: priority * * This routine enables (OAS_LUN_ENABLE) or disables (OAS_LUN_DISABLE) * a lun for OAS operations. * * Return: * SUCCESS: 0 * -ENOMEM: failed to enable an lun for OAS operations * -EPERM: OAS is not enabled */ static ssize_t lpfc_oas_lun_state_change(struct lpfc_hba *phba, uint8_t vpt_wwpn[], uint8_t tgt_wwpn[], uint64_t lun, uint32_t oas_state, uint8_t pri) { int rc; rc = lpfc_oas_lun_state_set(phba, vpt_wwpn, tgt_wwpn, lun, oas_state, pri); return rc; } /** * lpfc_oas_lun_show - Return oas enabled luns from a chosen target * @dev: class device that is converted into a Scsi_host. * @attr: device attribute, not used. * @buf: buffer for passing information. * * This routine returns a lun enabled for OAS each time the function * is called. * * Returns: * SUCCESS: size of formatted string. * -EFAULT: target or vport wwpn was not set properly. * -EPERM: oas is not enabled. **/ static ssize_t lpfc_oas_lun_show(struct device *dev, struct device_attribute *attr, char *buf) { struct Scsi_Host *shost = class_to_shost(dev); struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba; uint64_t oas_lun; int len = 0; if (!phba->cfg_fof) return -EPERM; if (wwn_to_u64(phba->cfg_oas_vpt_wwpn) == 0) if (!(phba->cfg_oas_flags & OAS_FIND_ANY_VPORT)) return -EFAULT; if (wwn_to_u64(phba->cfg_oas_tgt_wwpn) == 0) if (!(phba->cfg_oas_flags & OAS_FIND_ANY_TARGET)) return -EFAULT; oas_lun = lpfc_oas_lun_get_next(phba, phba->cfg_oas_vpt_wwpn, phba->cfg_oas_tgt_wwpn, &phba->cfg_oas_lun_status, &phba->cfg_oas_priority); if (oas_lun != NOT_OAS_ENABLED_LUN) phba->cfg_oas_flags |= OAS_LUN_VALID; len += scnprintf(buf + len, PAGE_SIZE-len, "0x%llx", oas_lun); return len; } /** * lpfc_oas_lun_store - Sets the OAS state for lun * @dev: class device that is converted into a Scsi_host. * @attr: device attribute, not used. * @buf: buffer for passing information. * @count: size of the formatting string * * This function sets the OAS state for lun. Before this function is called, * the vport wwpn, target wwpn, and oas state need to be set. * * Returns: * SUCCESS: size of formatted string. * -EFAULT: target or vport wwpn was not set properly. * -EPERM: oas is not enabled. * size of formatted string. **/ static ssize_t lpfc_oas_lun_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { struct Scsi_Host *shost = class_to_shost(dev); struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba; uint64_t scsi_lun; uint32_t pri; ssize_t rc; if (!phba->cfg_fof) return -EPERM; if (wwn_to_u64(phba->cfg_oas_vpt_wwpn) == 0) return -EFAULT; if (wwn_to_u64(phba->cfg_oas_tgt_wwpn) == 0) return -EFAULT; if (!isdigit(buf[0])) return -EINVAL; if (sscanf(buf, "0x%llx", &scsi_lun) != 1) return -EINVAL; pri = phba->cfg_oas_priority; if (pri == 0) pri = phba->cfg_XLanePriority; lpfc_printf_log(phba, KERN_INFO, LOG_INIT, "3372 Try to set vport 0x%llx target 0x%llx lun:0x%llx " "priority 0x%x with oas state %d\n", wwn_to_u64(phba->cfg_oas_vpt_wwpn), wwn_to_u64(phba->cfg_oas_tgt_wwpn), scsi_lun, pri, phba->cfg_oas_lun_state); rc = lpfc_oas_lun_state_change(phba, phba->cfg_oas_vpt_wwpn, phba->cfg_oas_tgt_wwpn, scsi_lun, phba->cfg_oas_lun_state, pri); if (rc) return rc; return count; } static DEVICE_ATTR(lpfc_xlane_lun, S_IRUGO | S_IWUSR, lpfc_oas_lun_show, lpfc_oas_lun_store); int lpfc_enable_nvmet_cnt; unsigned long long lpfc_enable_nvmet[LPFC_NVMET_MAX_PORTS] = { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}; module_param_array(lpfc_enable_nvmet, ullong, &lpfc_enable_nvmet_cnt, 0444); MODULE_PARM_DESC(lpfc_enable_nvmet, "Enable HBA port(s) WWPN as a NVME Target"); static int lpfc_poll = 0; module_param(lpfc_poll, int, S_IRUGO); MODULE_PARM_DESC(lpfc_poll, "FCP ring polling mode control:" " 0 - none," " 1 - poll with interrupts enabled" " 3 - poll and disable FCP ring interrupts"); static DEVICE_ATTR_RW(lpfc_poll); int lpfc_no_hba_reset_cnt; unsigned long lpfc_no_hba_reset[MAX_HBAS_NO_RESET] = { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}; module_param_array(lpfc_no_hba_reset, ulong, &lpfc_no_hba_reset_cnt, 0444); MODULE_PARM_DESC(lpfc_no_hba_reset, "WWPN of HBAs that should not be reset"); LPFC_ATTR(sli_mode, 3, 3, 3, "SLI mode selector: 3 - select SLI-3"); LPFC_ATTR_R(enable_npiv, 1, 0, 1, "Enable NPIV functionality"); LPFC_ATTR_R(fcf_failover_policy, 1, 1, 2, "FCF Fast failover=1 Priority failover=2"); /* * lpfc_fcp_wait_abts_rsp: Modifies criteria for reporting completion of * aborted IO. * The range is [0,1]. Default value is 0 * 0, IO completes after ABTS issued (default). * 1, IO completes after receipt of ABTS response or timeout. */ LPFC_ATTR_R(fcp_wait_abts_rsp, 0, 0, 1, "Wait for FCP ABTS completion"); /* # lpfc_enable_rrq: Track XRI/OXID reuse after IO failures # 0x0 = disabled, XRI/OXID use not tracked. # 0x1 = XRI/OXID reuse is timed with ratov, RRQ sent. # 0x2 = XRI/OXID reuse is timed with ratov, No RRQ sent. */ LPFC_ATTR_R(enable_rrq, 2, 0, 2, "Enable RRQ functionality"); /* # lpfc_suppress_link_up: Bring link up at initialization # 0x0 = bring link up (issue MBX_INIT_LINK) # 0x1 = do NOT bring link up at initialization(MBX_INIT_LINK) # 0x2 = never bring up link # Default value is 0. */ LPFC_ATTR_R(suppress_link_up, LPFC_INITIALIZE_LINK, LPFC_INITIALIZE_LINK, LPFC_DELAY_INIT_LINK_INDEFINITELY, "Suppress Link Up at initialization"); static ssize_t lpfc_pls_show(struct device *dev, struct device_attribute *attr, char *buf) { struct Scsi_Host *shost = class_to_shost(dev); struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba; return scnprintf(buf, PAGE_SIZE, "%d\n", phba->sli4_hba.pc_sli4_params.pls); } static DEVICE_ATTR(pls, 0444, lpfc_pls_show, NULL); static ssize_t lpfc_pt_show(struct device *dev, struct device_attribute *attr, char *buf) { struct Scsi_Host *shost = class_to_shost(dev); struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba; return scnprintf(buf, PAGE_SIZE, "%d\n", test_bit(HBA_PERSISTENT_TOPO, &phba->hba_flag) ? 1 : 0); } static DEVICE_ATTR(pt, 0444, lpfc_pt_show, NULL); /* # lpfc_cnt: Number of IOCBs allocated for ELS, CT, and ABTS # 1 - (1024) # 2 - (2048) # 3 - (3072) # 4 - (4096) # 5 - (5120) */ static ssize_t lpfc_iocb_hw_show(struct device *dev, struct device_attribute *attr, char *buf) { struct Scsi_Host *shost = class_to_shost(dev); struct lpfc_hba *phba = ((struct lpfc_vport *) shost->hostdata)->phba; return scnprintf(buf, PAGE_SIZE, "%d\n", phba->iocb_max); } static DEVICE_ATTR(iocb_hw, S_IRUGO, lpfc_iocb_hw_show, NULL); static ssize_t lpfc_txq_hw_show(struct device *dev, struct device_attribute *attr, char *buf) { struct Scsi_Host *shost = class_to_shost(dev); struct lpfc_hba *phba = ((struct lpfc_vport *) shost->hostdata)->phba; struct lpfc_sli_ring *pring = lpfc_phba_elsring(phba); return scnprintf(buf, PAGE_SIZE, "%d\n", pring ? pring->txq_max : 0); } static DEVICE_ATTR(txq_hw, S_IRUGO, lpfc_txq_hw_show, NULL); static ssize_t lpfc_txcmplq_hw_show(struct device *dev, struct device_attribute *attr, char *buf) { struct Scsi_Host *shost = class_to_shost(dev); struct lpfc_hba *phba = ((struct lpfc_vport *) shost->hostdata)->phba; struct lpfc_sli_ring *pring = lpfc_phba_elsring(phba); return scnprintf(buf, PAGE_SIZE, "%d\n", pring ? pring->txcmplq_max : 0); } static DEVICE_ATTR(txcmplq_hw, S_IRUGO, lpfc_txcmplq_hw_show, NULL); /* # lpfc_nodev_tmo: If set, it will hold all I/O errors on devices that disappear # until the timer expires. Value range is [0,255]. Default value is 30. */ static int lpfc_nodev_tmo = LPFC_DEF_DEVLOSS_TMO; static int lpfc_devloss_tmo = LPFC_DEF_DEVLOSS_TMO; module_param(lpfc_nodev_tmo, int, 0); MODULE_PARM_DESC(lpfc_nodev_tmo, "Seconds driver will hold I/O waiting " "for a device to come back"); /** * lpfc_nodev_tmo_show - Return the hba dev loss timeout value * @dev: class converted to a Scsi_host structure. * @attr: device attribute, not used. * @buf: on return contains the dev loss timeout in decimal. * * Returns: size of formatted string. **/ static ssize_t lpfc_nodev_tmo_show(struct device *dev, struct device_attribute *attr, char *buf) { struct Scsi_Host *shost = class_to_shost(dev); struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata; return scnprintf(buf, PAGE_SIZE, "%d\n", vport->cfg_devloss_tmo); } /** * lpfc_nodev_tmo_init - Set the hba nodev timeout value * @vport: lpfc vport structure pointer. * @val: contains the nodev timeout value. * * Description: * If the devloss tmo is already set then nodev tmo is set to devloss tmo, * a kernel error message is printed and zero is returned. * Else if val is in range then nodev tmo and devloss tmo are set to val. * Otherwise nodev tmo is set to the default value. * * Returns: * zero if already set or if val is in range * -EINVAL val out of range **/ static int lpfc_nodev_tmo_init(struct lpfc_vport *vport, int val) { if (vport->cfg_devloss_tmo != LPFC_DEF_DEVLOSS_TMO) { vport->cfg_nodev_tmo = vport->cfg_devloss_tmo; if (val != LPFC_DEF_DEVLOSS_TMO) lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT, "0407 Ignoring lpfc_nodev_tmo module " "parameter because lpfc_devloss_tmo " "is set.\n"); return 0; } if (val >= LPFC_MIN_DEVLOSS_TMO && val <= LPFC_MAX_DEVLOSS_TMO) { vport->cfg_nodev_tmo = val; vport->cfg_devloss_tmo = val; return 0; } lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT, "0400 lpfc_nodev_tmo attribute cannot be set to" " %d, allowed range is [%d, %d]\n", val, LPFC_MIN_DEVLOSS_TMO, LPFC_MAX_DEVLOSS_TMO); vport->cfg_nodev_tmo = LPFC_DEF_DEVLOSS_TMO; return -EINVAL; } /** * lpfc_update_rport_devloss_tmo - Update dev loss tmo value * @vport: lpfc vport structure pointer. * * Description: * Update all the ndlp's dev loss tmo with the vport devloss tmo value. **/ static void lpfc_update_rport_devloss_tmo(struct lpfc_vport *vport) { struct lpfc_nodelist *ndlp; unsigned long iflags; #if (IS_ENABLED(CONFIG_NVME_FC)) struct lpfc_nvme_rport *rport; struct nvme_fc_remote_port *remoteport = NULL; #endif spin_lock_irqsave(&vport->fc_nodes_list_lock, iflags); list_for_each_entry(ndlp, &vport->fc_nodes, nlp_listp) { if (ndlp->rport) ndlp->rport->dev_loss_tmo = vport->cfg_devloss_tmo; #if (IS_ENABLED(CONFIG_NVME_FC)) spin_lock(&ndlp->lock); rport = lpfc_ndlp_get_nrport(ndlp); if (rport) remoteport = rport->remoteport; spin_unlock(&ndlp->lock); if (rport && remoteport) nvme_fc_set_remoteport_devloss(remoteport, vport->cfg_devloss_tmo); #endif } spin_unlock_irqrestore(&vport->fc_nodes_list_lock, iflags); } /** * lpfc_nodev_tmo_set - Set the vport nodev tmo and devloss tmo values * @vport: lpfc vport structure pointer. * @val: contains the tmo value. * * Description: * If the devloss tmo is already set or the vport dev loss tmo has changed * then a kernel error message is printed and zero is returned. * Else if val is in range then nodev tmo and devloss tmo are set to val. * Otherwise nodev tmo is set to the default value. * * Returns: * zero if already set or if val is in range * -EINVAL val out of range **/ static int lpfc_nodev_tmo_set(struct lpfc_vport *vport, int val) { if (vport->dev_loss_tmo_changed || (lpfc_devloss_tmo != LPFC_DEF_DEVLOSS_TMO)) { lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT, "0401 Ignoring change to lpfc_nodev_tmo " "because lpfc_devloss_tmo is set.\n"); return 0; } if (val >= LPFC_MIN_DEVLOSS_TMO && val <= LPFC_MAX_DEVLOSS_TMO) { vport->cfg_nodev_tmo = val; vport->cfg_devloss_tmo = val; /* * For compat: set the fc_host dev loss so new rports * will get the value. */ fc_host_dev_loss_tmo(lpfc_shost_from_vport(vport)) = val; lpfc_update_rport_devloss_tmo(vport); return 0; } lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT, "0403 lpfc_nodev_tmo attribute cannot be set to " "%d, allowed range is [%d, %d]\n", val, LPFC_MIN_DEVLOSS_TMO, LPFC_MAX_DEVLOSS_TMO); return -EINVAL; } lpfc_vport_param_store(nodev_tmo) static DEVICE_ATTR_RW(lpfc_nodev_tmo); /* # lpfc_devloss_tmo: If set, it will hold all I/O errors on devices that # disappear until the timer expires. Value range is [0,255]. Default # value is 30. */ module_param(lpfc_devloss_tmo, int, S_IRUGO); MODULE_PARM_DESC(lpfc_devloss_tmo, "Seconds driver will hold I/O waiting " "for a device to come back"); lpfc_vport_param_init(devloss_tmo, LPFC_DEF_DEVLOSS_TMO, LPFC_MIN_DEVLOSS_TMO, LPFC_MAX_DEVLOSS_TMO) lpfc_vport_param_show(devloss_tmo) /** * lpfc_devloss_tmo_set - Sets vport nodev tmo, devloss tmo values, changed bit * @vport: lpfc vport structure pointer. * @val: contains the tmo value. * * Description: * If val is in a valid range then set the vport nodev tmo, * devloss tmo, also set the vport dev loss tmo changed flag. * Else a kernel error message is printed. * * Returns: * zero if val is in range * -EINVAL val out of range **/ static int lpfc_devloss_tmo_set(struct lpfc_vport *vport, int val) { if (val >= LPFC_MIN_DEVLOSS_TMO && val <= LPFC_MAX_DEVLOSS_TMO) { vport->cfg_nodev_tmo = val; vport->cfg_devloss_tmo = val; vport->dev_loss_tmo_changed = 1; fc_host_dev_loss_tmo(lpfc_shost_from_vport(vport)) = val; lpfc_update_rport_devloss_tmo(vport); return 0; } lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT, "0404 lpfc_devloss_tmo attribute cannot be set to " "%d, allowed range is [%d, %d]\n", val, LPFC_MIN_DEVLOSS_TMO, LPFC_MAX_DEVLOSS_TMO); return -EINVAL; } lpfc_vport_param_store(devloss_tmo) static DEVICE_ATTR_RW(lpfc_devloss_tmo); /* * lpfc_suppress_rsp: Enable suppress rsp feature is firmware supports it * lpfc_suppress_rsp = 0 Disable * lpfc_suppress_rsp = 1 Enable (default) * */ LPFC_ATTR_R(suppress_rsp, 1, 0, 1, "Enable suppress rsp feature is firmware supports it"); /* * lpfc_nvmet_mrq: Specify number of RQ pairs for processing NVMET cmds * lpfc_nvmet_mrq = 0 driver will calcualte optimal number of RQ pairs * lpfc_nvmet_mrq = 1 use a single RQ pair * lpfc_nvmet_mrq >= 2 use specified RQ pairs for MRQ * */ LPFC_ATTR_R(nvmet_mrq, LPFC_NVMET_MRQ_AUTO, LPFC_NVMET_MRQ_AUTO, LPFC_NVMET_MRQ_MAX, "Specify number of RQ pairs for processing NVMET cmds"); /* * lpfc_nvmet_mrq_post: Specify number of RQ buffer to initially post * to each NVMET RQ. Range 64 to 2048, default is 512. */ LPFC_ATTR_R(nvmet_mrq_post, LPFC_NVMET_RQE_DEF_POST, LPFC_NVMET_RQE_MIN_POST, LPFC_NVMET_RQE_DEF_COUNT, "Specify number of RQ buffers to initially post"); /* * lpfc_enable_fc4_type: Defines what FC4 types are supported. * Supported Values: 1 - register just FCP * 3 - register both FCP and NVME * Supported values are [1,3]. Default value is 3 */ LPFC_ATTR_R(enable_fc4_type, LPFC_DEF_ENBL_FC4_TYPE, LPFC_ENABLE_FCP, LPFC_MAX_ENBL_FC4_TYPE, "Enable FC4 Protocol support - FCP / NVME"); /* # lpfc_log_verbose: Only turn this flag on if you are willing to risk being # deluged with LOTS of information. # You can set a bit mask to record specific types of verbose messages: # See lpfc_logmsh.h for definitions. */ LPFC_VPORT_ATTR_HEX_RW(log_verbose, 0x0, 0x0, 0xffffffff, "Verbose logging bit-mask"); /* # lpfc_enable_da_id: This turns on the DA_ID CT command that deregisters # objects that have been registered with the nameserver after login. */ LPFC_VPORT_ATTR_R(enable_da_id, 1, 0, 1, "Deregister nameserver objects before LOGO"); /* # lun_queue_depth: This parameter is used to limit the number of outstanding # commands per FCP LUN. */ LPFC_VPORT_ATTR_R(lun_queue_depth, 64, 1, 512, "Max number of FCP commands we can queue to a specific LUN"); /* # tgt_queue_depth: This parameter is used to limit the number of outstanding # commands per target port. Value range is [10,65535]. Default value is 65535. */ static uint lpfc_tgt_queue_depth = LPFC_MAX_TGT_QDEPTH; module_param(lpfc_tgt_queue_depth, uint, 0444); MODULE_PARM_DESC(lpfc_tgt_queue_depth, "Set max Target queue depth"); lpfc_vport_param_show(tgt_queue_depth); lpfc_vport_param_init(tgt_queue_depth, LPFC_MAX_TGT_QDEPTH, LPFC_MIN_TGT_QDEPTH, LPFC_MAX_TGT_QDEPTH); /** * lpfc_tgt_queue_depth_set: Sets an attribute value. * @vport: lpfc vport structure pointer. * @val: integer attribute value. * * Description: Sets the parameter to the new value. * * Returns: * zero on success * -EINVAL if val is invalid */ static int lpfc_tgt_queue_depth_set(struct lpfc_vport *vport, uint val) { struct lpfc_nodelist *ndlp; unsigned long iflags; if (!lpfc_rangecheck(val, LPFC_MIN_TGT_QDEPTH, LPFC_MAX_TGT_QDEPTH)) return -EINVAL; if (val == vport->cfg_tgt_queue_depth) return 0; vport->cfg_tgt_queue_depth = val; /* Next loop thru nodelist and change cmd_qdepth */ spin_lock_irqsave(&vport->fc_nodes_list_lock, iflags); list_for_each_entry(ndlp, &vport->fc_nodes, nlp_listp) ndlp->cmd_qdepth = vport->cfg_tgt_queue_depth; spin_unlock_irqrestore(&vport->fc_nodes_list_lock, iflags); return 0; } lpfc_vport_param_store(tgt_queue_depth); static DEVICE_ATTR_RW(lpfc_tgt_queue_depth); /* # hba_queue_depth: This parameter is used to limit the number of outstanding # commands per lpfc HBA. Value range is [32,8192]. If this parameter # value is greater than the maximum number of exchanges supported by the HBA, # then maximum number of exchanges supported by the HBA is used to determine # the hba_queue_depth. */ LPFC_ATTR_R(hba_queue_depth, 8192, 32, 8192, "Max number of FCP commands we can queue to a lpfc HBA"); /* # peer_port_login: This parameter allows/prevents logins # between peer ports hosted on the same physical port. # When this parameter is set 0 peer ports of same physical port # are not allowed to login to each other. # When this parameter is set 1 peer ports of same physical port # are allowed to login to each other. # Default value of this parameter is 0. */ LPFC_VPORT_ATTR_R(peer_port_login, 0, 0, 1, "Allow peer ports on the same physical port to login to each " "other."); /* # restrict_login: This parameter allows/prevents logins # between Virtual Ports and remote initiators. # When this parameter is not set (0) Virtual Ports will accept PLOGIs from # other initiators and will attempt to PLOGI all remote ports. # When this parameter is set (1) Virtual Ports will reject PLOGIs from # remote ports and will not attempt to PLOGI to other initiators. # This parameter does not restrict to the physical port. # This parameter does not restrict logins to Fabric resident remote ports. # Default value of this parameter is 1. */ static int lpfc_restrict_login = 1; module_param(lpfc_restrict_login, int, S_IRUGO); MODULE_PARM_DESC(lpfc_restrict_login, "Restrict virtual ports login to remote initiators."); lpfc_vport_param_show(restrict_login); /** * lpfc_restrict_login_init - Set the vport restrict login flag * @vport: lpfc vport structure pointer. * @val: contains the restrict login value. * * Description: * If val is not in a valid range then log a kernel error message and set * the vport restrict login to one. * If the port type is physical clear the restrict login flag and return. * Else set the restrict login flag to val. * * Returns: * zero if val is in range * -EINVAL val out of range **/ static int lpfc_restrict_login_init(struct lpfc_vport *vport, int val) { if (val < 0 || val > 1) { lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT, "0422 lpfc_restrict_login attribute cannot " "be set to %d, allowed range is [0, 1]\n", val); vport->cfg_restrict_login = 1; return -EINVAL; } if (vport->port_type == LPFC_PHYSICAL_PORT) { vport->cfg_restrict_login = 0; return 0; } vport->cfg_restrict_login = val; return 0; } /** * lpfc_restrict_login_set - Set the vport restrict login flag * @vport: lpfc vport structure pointer. * @val: contains the restrict login value. * * Description: * If val is not in a valid range then log a kernel error message and set * the vport restrict login to one. * If the port type is physical and the val is not zero log a kernel * error message, clear the restrict login flag and return zero. * Else set the restrict login flag to val. * * Returns: * zero if val is in range * -EINVAL val out of range **/ static int lpfc_restrict_login_set(struct lpfc_vport *vport, int val) { if (val < 0 || val > 1) { lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT, "0425 lpfc_restrict_login attribute cannot " "be set to %d, allowed range is [0, 1]\n", val); vport->cfg_restrict_login = 1; return -EINVAL; } if (vport->port_type == LPFC_PHYSICAL_PORT && val != 0) { lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT, "0468 lpfc_restrict_login must be 0 for " "Physical ports.\n"); vport->cfg_restrict_login = 0; return 0; } vport->cfg_restrict_login = val; return 0; } lpfc_vport_param_store(restrict_login); static DEVICE_ATTR_RW(lpfc_restrict_login); /* # Some disk devices have a "select ID" or "select Target" capability. # From a protocol standpoint "select ID" usually means select the # Fibre channel "ALPA". In the FC-AL Profile there is an "informative # annex" which contains a table that maps a "select ID" (a number # between 0 and 7F) to an ALPA. By default, for compatibility with # older drivers, the lpfc driver scans this table from low ALPA to high # ALPA. # # Turning on the scan-down variable (on = 1, off = 0) will # cause the lpfc driver to use an inverted table, effectively # scanning ALPAs from high to low. Value range is [0,1]. Default value is 1. # # (Note: This "select ID" functionality is a LOOP ONLY characteristic # and will not work across a fabric. Also this parameter will take # effect only in the case when ALPA map is not available.) */ LPFC_VPORT_ATTR_R(scan_down, 1, 0, 1, "Start scanning for devices from highest ALPA to lowest"); /* # lpfc_topology: link topology for init link # 0x0 = attempt loop mode then point-to-point # 0x01 = internal loopback mode # 0x02 = attempt point-to-point mode only # 0x04 = attempt loop mode only # 0x06 = attempt point-to-point mode then loop # Set point-to-point mode if you want to run as an N_Port. # Set loop mode if you want to run as an NL_Port. Value range is [0,0x6]. # Default value is 0. */ LPFC_ATTR(topology, 0, 0, 6, "Select Fibre Channel topology"); /** * lpfc_topology_store - Set the adapters topology field * @dev: class device that is converted into a scsi_host. * @attr:device attribute, not used. * @buf: buffer for passing information. * @count: size of the data buffer. * * Description: * If val is in a valid range then set the adapter's topology field and * issue a lip; if the lip fails reset the topology to the old value. * * If the value is not in range log a kernel error message and return an error. * * Returns: * zero if val is in range and lip okay * non-zero return value from lpfc_issue_lip() * -EINVAL val out of range **/ static ssize_t lpfc_topology_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { struct Scsi_Host *shost = class_to_shost(dev); struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata; struct lpfc_hba *phba = vport->phba; int val = 0; int nolip = 0; const char *val_buf = buf; int err; uint32_t prev_val; u8 sli_family, if_type; if (!strncmp(buf, "nolip ", strlen("nolip "))) { nolip = 1; val_buf = &buf[strlen("nolip ")]; } if (!isdigit(val_buf[0])) return -EINVAL; if (sscanf(val_buf, "%i", &val) != 1) return -EINVAL; if (val >= 0 && val <= 6) { prev_val = phba->cfg_topology; if (phba->cfg_link_speed == LPFC_USER_LINK_SPEED_16G && val == 4) { lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT, "3113 Loop mode not supported at speed %d\n", val); return -EINVAL; } /* * The 'topology' is not a configurable parameter if : * - persistent topology enabled * - ASIC_GEN_NUM >= 0xC, with no private loop support */ sli_family = bf_get(lpfc_sli_intf_sli_family, &phba->sli4_hba.sli_intf); if_type = bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf); if ((test_bit(HBA_PERSISTENT_TOPO, &phba->hba_flag) || (!phba->sli4_hba.pc_sli4_params.pls && (sli_family == LPFC_SLI_INTF_FAMILY_G6 || if_type == LPFC_SLI_INTF_IF_TYPE_6))) && val == 4) { lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT, "3114 Loop mode not supported\n"); return -EINVAL; } phba->cfg_topology = val; if (nolip) return strlen(buf); lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT, "3054 lpfc_topology changed from %d to %d\n", prev_val, val); if (prev_val != val && phba->sli_rev == LPFC_SLI_REV4) phba->fc_topology_changed = 1; err = lpfc_issue_lip(lpfc_shost_from_vport(phba->pport)); if (err) { phba->cfg_topology = prev_val; return -EINVAL; } else return strlen(buf); } lpfc_printf_log(phba, KERN_ERR, LOG_INIT, "%d:0467 lpfc_topology attribute cannot be set to %d, " "allowed range is [0, 6]\n", phba->brd_no, val); return -EINVAL; } lpfc_param_show(topology) static DEVICE_ATTR_RW(lpfc_topology); /** * lpfc_static_vport_show: Read callback function for * lpfc_static_vport sysfs file. * @dev: Pointer to class device object. * @attr: device attribute structure. * @buf: Data buffer. * * This function is the read call back function for * lpfc_static_vport sysfs file. The lpfc_static_vport * sysfs file report the mageability of the vport. **/ static ssize_t lpfc_static_vport_show(struct device *dev, struct device_attribute *attr, char *buf) { struct Scsi_Host *shost = class_to_shost(dev); struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata; if (vport->vport_flag & STATIC_VPORT) sprintf(buf, "1\n"); else sprintf(buf, "0\n"); return strlen(buf); } /* * Sysfs attribute to control the statistical data collection. */ static DEVICE_ATTR_RO(lpfc_static_vport); /* # lpfc_link_speed: Link speed selection for initializing the Fibre Channel # connection. # Value range is [0,16]. Default value is 0. */ /** * lpfc_link_speed_store - Set the adapters link speed * @dev: Pointer to class device. * @attr: Unused. * @buf: Data buffer. * @count: Size of the data buffer. * * Description: * If val is in a valid range then set the adapter's link speed field and * issue a lip; if the lip fails reset the link speed to the old value. * * Notes: * If the value is not in range log a kernel error message and return an error. * * Returns: * zero if val is in range and lip okay. * non-zero return value from lpfc_issue_lip() * -EINVAL val out of range **/ static ssize_t lpfc_link_speed_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { struct Scsi_Host *shost = class_to_shost(dev); struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata; struct lpfc_hba *phba = vport->phba; int val = LPFC_USER_LINK_SPEED_AUTO; int nolip = 0; const char *val_buf = buf; int err; uint32_t prev_val, if_type; if_type = bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf); if (if_type >= LPFC_SLI_INTF_IF_TYPE_2 && test_bit(HBA_FORCED_LINK_SPEED, &phba->hba_flag)) return -EPERM; if (!strncmp(buf, "nolip ", strlen("nolip "))) { nolip = 1; val_buf = &buf[strlen("nolip ")]; } if (!isdigit(val_buf[0])) return -EINVAL; if (sscanf(val_buf, "%i", &val) != 1) return -EINVAL; lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT, "3055 lpfc_link_speed changed from %d to %d %s\n", phba->cfg_link_speed, val, nolip ? "(nolip)" : "(lip)"); if (((val == LPFC_USER_LINK_SPEED_1G) && !(phba->lmt & LMT_1Gb)) || ((val == LPFC_USER_LINK_SPEED_2G) && !(phba->lmt & LMT_2Gb)) || ((val == LPFC_USER_LINK_SPEED_4G) && !(phba->lmt & LMT_4Gb)) || ((val == LPFC_USER_LINK_SPEED_8G) && !(phba->lmt & LMT_8Gb)) || ((val == LPFC_USER_LINK_SPEED_10G) && !(phba->lmt & LMT_10Gb)) || ((val == LPFC_USER_LINK_SPEED_16G) && !(phba->lmt & LMT_16Gb)) || ((val == LPFC_USER_LINK_SPEED_32G) && !(phba->lmt & LMT_32Gb)) || ((val == LPFC_USER_LINK_SPEED_64G) && !(phba->lmt & LMT_64Gb))) { lpfc_printf_log(phba, KERN_ERR, LOG_INIT, "2879 lpfc_link_speed attribute cannot be set " "to %d. Speed is not supported by this port.\n", val); return -EINVAL; } if (val >= LPFC_USER_LINK_SPEED_16G && phba->fc_topology == LPFC_TOPOLOGY_LOOP) { lpfc_printf_log(phba, KERN_ERR, LOG_INIT, "3112 lpfc_link_speed attribute cannot be set " "to %d. Speed is not supported in loop mode.\n", val); return -EINVAL; } switch (val) { case LPFC_USER_LINK_SPEED_AUTO: case LPFC_USER_LINK_SPEED_1G: case LPFC_USER_LINK_SPEED_2G: case LPFC_USER_LINK_SPEED_4G: case LPFC_USER_LINK_SPEED_8G: case LPFC_USER_LINK_SPEED_16G: case LPFC_USER_LINK_SPEED_32G: case LPFC_USER_LINK_SPEED_64G: prev_val = phba->cfg_link_speed; phba->cfg_link_speed = val; if (nolip) return strlen(buf); err = lpfc_issue_lip(lpfc_shost_from_vport(phba->pport)); if (err) { phba->cfg_link_speed = prev_val; return -EINVAL; } return strlen(buf); default: break; } lpfc_printf_log(phba, KERN_ERR, LOG_INIT, "0469 lpfc_link_speed attribute cannot be set to %d, " "allowed values are [%s]\n", val, LPFC_LINK_SPEED_STRING); return -EINVAL; } static int lpfc_link_speed = 0; module_param(lpfc_link_speed, int, S_IRUGO); MODULE_PARM_DESC(lpfc_link_speed, "Select link speed"); lpfc_param_show(link_speed) /** * lpfc_link_speed_init - Set the adapters link speed * @phba: lpfc_hba pointer. * @val: link speed value. * * Description: * If val is in a valid range then set the adapter's link speed field. * * Notes: * If the value is not in range log a kernel error message, clear the link * speed and return an error. * * Returns: * zero if val saved. * -EINVAL val out of range **/ static int lpfc_link_speed_init(struct lpfc_hba *phba, int val) { if (val >= LPFC_USER_LINK_SPEED_16G && phba->cfg_topology == 4) { lpfc_printf_log(phba, KERN_ERR, LOG_INIT, "3111 lpfc_link_speed of %d cannot " "support loop mode, setting topology to default.\n", val); phba->cfg_topology = 0; } switch (val) { case LPFC_USER_LINK_SPEED_AUTO: case LPFC_USER_LINK_SPEED_1G: case LPFC_USER_LINK_SPEED_2G: case LPFC_USER_LINK_SPEED_4G: case LPFC_USER_LINK_SPEED_8G: case LPFC_USER_LINK_SPEED_16G: case LPFC_USER_LINK_SPEED_32G: case LPFC_USER_LINK_SPEED_64G: phba->cfg_link_speed = val; return 0; default: lpfc_printf_log(phba, KERN_ERR, LOG_INIT, "0405 lpfc_link_speed attribute cannot " "be set to %d, allowed values are " "["LPFC_LINK_SPEED_STRING"]\n", val); phba->cfg_link_speed = LPFC_USER_LINK_SPEED_AUTO; return -EINVAL; } } static DEVICE_ATTR_RW(lpfc_link_speed); /* # lpfc_aer_support: Support PCIe device Advanced Error Reporting (AER) # 1 = aer supported and enabled (default) # PCIe error reporting is always enabled by the PCI core, so this always # shows 1. # # N.B. Parts of LPFC_ATTR open-coded since some of the underlying # infrastructure (phba->cfg_aer_support) is gone. */ static uint lpfc_aer_support = 1; module_param(lpfc_aer_support, uint, S_IRUGO); MODULE_PARM_DESC(lpfc_aer_support, "Enable PCIe device AER support"); static ssize_t lpfc_aer_support_show(struct device *dev, struct device_attribute *attr, char *buf) { return scnprintf(buf, PAGE_SIZE, "%d\n", lpfc_aer_support); } /** * lpfc_aer_support_store - Set the adapter for aer support * * @dev: class device that is converted into a Scsi_host. * @attr: device attribute, not used. * @buf: containing enable or disable aer flag. * @count: unused variable. * * Description: * PCIe error reporting is enabled by the PCI core, so drivers don't need * to do anything. Retain this interface for backwards compatibility, * but do nothing. * * Returns: * length of the buf on success * -EINVAL if val out of range **/ static ssize_t lpfc_aer_support_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { int val = 0; if (!isdigit(buf[0])) return -EINVAL; if (sscanf(buf, "%i", &val) != 1) return -EINVAL; dev_info_once(dev, "PCIe error reporting automatically enabled by the PCI core; sysfs write ignored\n"); return strlen(buf); } static DEVICE_ATTR_RW(lpfc_aer_support); /** * lpfc_aer_cleanup_state - Clean up aer state to the aer enabled device * @dev: class device that is converted into a Scsi_host. * @attr: device attribute, not used. * @buf: containing flag 1 for aer cleanup state. * @count: unused variable. * * Description: * If the @buf contains 1, invokes the kernel AER helper routine * pci_aer_clear_nonfatal_status() to clean up the uncorrectable * error status register. * * Notes: * * Returns: * -EINVAL if the buf does not contain 1 * -EPERM if the OS cannot clear AER error status, i.e., when platform * firmware owns the AER Capability **/ static ssize_t lpfc_aer_cleanup_state(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { struct Scsi_Host *shost = class_to_shost(dev); struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata; struct lpfc_hba *phba = vport->phba; int val, rc = -1; if (!isdigit(buf[0])) return -EINVAL; if (sscanf(buf, "%i", &val) != 1) return -EINVAL; if (val != 1) return -EINVAL; rc = pci_aer_clear_nonfatal_status(phba->pcidev); if (rc == 0) return strlen(buf); else return -EPERM; } static DEVICE_ATTR(lpfc_aer_state_cleanup, S_IWUSR, NULL, lpfc_aer_cleanup_state); /** * lpfc_sriov_nr_virtfn_store - Enable the adapter for sr-iov virtual functions * * @dev: class device that is converted into a Scsi_host. * @attr: device attribute, not used. * @buf: containing the string the number of vfs to be enabled. * @count: unused variable. * * Description: * When this api is called either through user sysfs, the driver shall * try to enable or disable SR-IOV virtual functions according to the * following: * * If zero virtual function has been enabled to the physical function, * the driver shall invoke the pci enable virtual function api trying * to enable the virtual functions. If the nr_vfn provided is greater * than the maximum supported, the maximum virtual function number will * be used for invoking the api; otherwise, the nr_vfn provided shall * be used for invoking the api. If the api call returned success, the * actual number of virtual functions enabled will be set to the driver * cfg_sriov_nr_virtfn; otherwise, -EINVAL shall be returned and driver * cfg_sriov_nr_virtfn remains zero. * * If none-zero virtual functions have already been enabled to the * physical function, as reflected by the driver's cfg_sriov_nr_virtfn, * -EINVAL will be returned and the driver does nothing; * * If the nr_vfn provided is zero and none-zero virtual functions have * been enabled, as indicated by the driver's cfg_sriov_nr_virtfn, the * disabling virtual function api shall be invoded to disable all the * virtual functions and driver's cfg_sriov_nr_virtfn shall be set to * zero. Otherwise, if zero virtual function has been enabled, do * nothing. * * Returns: * length of the buf on success if val is in range the intended mode * is supported. * -EINVAL if val out of range or intended mode is not supported. **/ static ssize_t lpfc_sriov_nr_virtfn_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { struct Scsi_Host *shost = class_to_shost(dev); struct lpfc_vport *vport = (struct lpfc_vport *)shost->hostdata; struct lpfc_hba *phba = vport->phba; struct pci_dev *pdev = phba->pcidev; int val = 0, rc = -EINVAL; /* Sanity check on user data */ if (!isdigit(buf[0])) return -EINVAL; if (sscanf(buf, "%i", &val) != 1) return -EINVAL; if (val < 0) return -EINVAL; /* Request disabling virtual functions */ if (val == 0) { if (phba->cfg_sriov_nr_virtfn > 0) { pci_disable_sriov(pdev); phba->cfg_sriov_nr_virtfn = 0; } return strlen(buf); } /* Request enabling virtual functions */ if (phba->cfg_sriov_nr_virtfn > 0) { lpfc_printf_log(phba, KERN_ERR, LOG_INIT, "3018 There are %d virtual functions " "enabled on physical function.\n", phba->cfg_sriov_nr_virtfn); return -EEXIST; } if (val <= LPFC_MAX_VFN_PER_PFN) phba->cfg_sriov_nr_virtfn = val; else { lpfc_printf_log(phba, KERN_ERR, LOG_INIT, "3019 Enabling %d virtual functions is not " "allowed.\n", val); return -EINVAL; } rc = lpfc_sli_probe_sriov_nr_virtfn(phba, phba->cfg_sriov_nr_virtfn); if (rc) { phba->cfg_sriov_nr_virtfn = 0; rc = -EPERM; } else rc = strlen(buf); return rc; } LPFC_ATTR(sriov_nr_virtfn, LPFC_DEF_VFN_PER_PFN, 0, LPFC_MAX_VFN_PER_PFN, "Enable PCIe device SR-IOV virtual fn"); lpfc_param_show(sriov_nr_virtfn) static DEVICE_ATTR_RW(lpfc_sriov_nr_virtfn); /** * lpfc_request_firmware_upgrade_store - Request for Linux generic firmware upgrade * * @dev: class device that is converted into a Scsi_host. * @attr: device attribute, not used. * @buf: containing the string the number of vfs to be enabled. * @count: unused variable. * * Description: * * Returns: * length of the buf on success if val is in range the intended mode * is supported. * -EINVAL if val out of range or intended mode is not supported. **/ static ssize_t lpfc_request_firmware_upgrade_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { struct Scsi_Host *shost = class_to_shost(dev); struct lpfc_vport *vport = (struct lpfc_vport *)shost->hostdata; struct lpfc_hba *phba = vport->phba; int val = 0, rc; /* Sanity check on user data */ if (!isdigit(buf[0])) return -EINVAL; if (sscanf(buf, "%i", &val) != 1) return -EINVAL; if (val != 1) return -EINVAL; rc = lpfc_sli4_request_firmware_update(phba, RUN_FW_UPGRADE); if (rc) rc = -EPERM; else rc = strlen(buf); return rc; } static int lpfc_req_fw_upgrade; module_param(lpfc_req_fw_upgrade, int, S_IRUGO|S_IWUSR); MODULE_PARM_DESC(lpfc_req_fw_upgrade, "Enable Linux generic firmware upgrade"); lpfc_param_show(request_firmware_upgrade) /** * lpfc_request_firmware_upgrade_init - Enable initial linux generic fw upgrade * @phba: lpfc_hba pointer. * @val: 0 or 1. * * Description: * Set the initial Linux generic firmware upgrade enable or disable flag. * * Returns: * zero if val saved. * -EINVAL val out of range **/ static int lpfc_request_firmware_upgrade_init(struct lpfc_hba *phba, int val) { if (val >= 0 && val <= 1) { phba->cfg_request_firmware_upgrade = val; return 0; } return -EINVAL; } static DEVICE_ATTR(lpfc_req_fw_upgrade, S_IRUGO | S_IWUSR, lpfc_request_firmware_upgrade_show, lpfc_request_firmware_upgrade_store); /** * lpfc_force_rscn_store * * @dev: class device that is converted into a Scsi_host. * @attr: device attribute, not used. * @buf: unused string * @count: unused variable. * * Description: * Force the switch to send a RSCN to all other NPorts in our zone * If we are direct connect pt2pt, build the RSCN command ourself * and send to the other NPort. Not supported for private loop. * * Returns: * 0 - on success * -EIO - if command is not sent **/ static ssize_t lpfc_force_rscn_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { struct Scsi_Host *shost = class_to_shost(dev); struct lpfc_vport *vport = (struct lpfc_vport *)shost->hostdata; int i; i = lpfc_issue_els_rscn(vport, 0); if (i) return -EIO; return strlen(buf); } /* * lpfc_force_rscn: Force an RSCN to be sent to all remote NPorts * connected to the HBA. * * Value range is any ascii value */ static int lpfc_force_rscn; module_param(lpfc_force_rscn, int, 0644); MODULE_PARM_DESC(lpfc_force_rscn, "Force an RSCN to be sent to all remote NPorts"); lpfc_param_show(force_rscn) /** * lpfc_force_rscn_init - Force an RSCN to be sent to all remote NPorts * @phba: lpfc_hba pointer. * @val: unused value. * * Returns: * zero if val saved. **/ static int lpfc_force_rscn_init(struct lpfc_hba *phba, int val) { return 0; } static DEVICE_ATTR_RW(lpfc_force_rscn); /** * lpfc_fcp_imax_store * * @dev: class device that is converted into a Scsi_host. * @attr: device attribute, not used. * @buf: string with the number of fast-path FCP interrupts per second. * @count: unused variable. * * Description: * If val is in a valid range [636,651042], then set the adapter's * maximum number of fast-path FCP interrupts per second. * * Returns: * length of the buf on success if val is in range the intended mode * is supported. * -EINVAL if val out of range or intended mode is not supported. **/ static ssize_t lpfc_fcp_imax_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { struct Scsi_Host *shost = class_to_shost(dev); struct lpfc_vport *vport = (struct lpfc_vport *)shost->hostdata; struct lpfc_hba *phba = vport->phba; struct lpfc_eq_intr_info *eqi; uint32_t usdelay; int val = 0, i; /* fcp_imax is only valid for SLI4 */ if (phba->sli_rev != LPFC_SLI_REV4) return -EINVAL; /* Sanity check on user data */ if (!isdigit(buf[0])) return -EINVAL; if (sscanf(buf, "%i", &val) != 1) return -EINVAL; /* * Value range for the HBA is [5000,5000000] * The value for each EQ depends on how many EQs are configured. * Allow value == 0 */ if (val && (val < LPFC_MIN_IMAX || val > LPFC_MAX_IMAX)) return -EINVAL; phba->cfg_auto_imax = (val) ? 0 : 1; if (phba->cfg_fcp_imax && !val) { queue_delayed_work(phba->wq, &phba->eq_delay_work, msecs_to_jiffies(LPFC_EQ_DELAY_MSECS)); for_each_present_cpu(i) { eqi = per_cpu_ptr(phba->sli4_hba.eq_info, i); eqi->icnt = 0; } } phba->cfg_fcp_imax = (uint32_t)val; if (phba->cfg_fcp_imax) usdelay = LPFC_SEC_TO_USEC / phba->cfg_fcp_imax; else usdelay = 0; for (i = 0; i < phba->cfg_irq_chann; i += LPFC_MAX_EQ_DELAY_EQID_CNT) lpfc_modify_hba_eq_delay(phba, i, LPFC_MAX_EQ_DELAY_EQID_CNT, usdelay); return strlen(buf); } /* # lpfc_fcp_imax: The maximum number of fast-path FCP interrupts per second # for the HBA. # # Value range is [5,000 to 5,000,000]. Default value is 50,000. */ static int lpfc_fcp_imax = LPFC_DEF_IMAX; module_param(lpfc_fcp_imax, int, S_IRUGO|S_IWUSR); MODULE_PARM_DESC(lpfc_fcp_imax, "Set the maximum number of FCP interrupts per second per HBA"); lpfc_param_show(fcp_imax) /** * lpfc_fcp_imax_init - Set the initial sr-iov virtual function enable * @phba: lpfc_hba pointer. * @val: link speed value. * * Description: * If val is in a valid range [636,651042], then initialize the adapter's * maximum number of fast-path FCP interrupts per second. * * Returns: * zero if val saved. * -EINVAL val out of range **/ static int lpfc_fcp_imax_init(struct lpfc_hba *phba, int val) { if (phba->sli_rev != LPFC_SLI_REV4) { phba->cfg_fcp_imax = 0; return 0; } if ((val >= LPFC_MIN_IMAX && val <= LPFC_MAX_IMAX) || (val == 0)) { phba->cfg_fcp_imax = val; return 0; } lpfc_printf_log(phba, KERN_ERR, LOG_INIT, "3016 lpfc_fcp_imax: %d out of range, using default\n", val); phba->cfg_fcp_imax = LPFC_DEF_IMAX; return 0; } static DEVICE_ATTR_RW(lpfc_fcp_imax); /** * lpfc_cq_max_proc_limit_store * * @dev: class device that is converted into a Scsi_host. * @attr: device attribute, not used. * @buf: string with the cq max processing limit of cqes * @count: unused variable. * * Description: * If val is in a valid range, then set value on each cq * * Returns: * The length of the buf: if successful * -ERANGE: if val is not in the valid range * -EINVAL: if bad value format or intended mode is not supported. **/ static ssize_t lpfc_cq_max_proc_limit_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { struct Scsi_Host *shost = class_to_shost(dev); struct lpfc_vport *vport = (struct lpfc_vport *)shost->hostdata; struct lpfc_hba *phba = vport->phba; struct lpfc_queue *eq, *cq; unsigned long val; int i; /* cq_max_proc_limit is only valid for SLI4 */ if (phba->sli_rev != LPFC_SLI_REV4) return -EINVAL; /* Sanity check on user data */ if (!isdigit(buf[0])) return -EINVAL; if (kstrtoul(buf, 0, &val)) return -EINVAL; if (val < LPFC_CQ_MIN_PROC_LIMIT || val > LPFC_CQ_MAX_PROC_LIMIT) return -ERANGE; phba->cfg_cq_max_proc_limit = (uint32_t)val; /* set the values on the cq's */ for (i = 0; i < phba->cfg_irq_chann; i++) { /* Get the EQ corresponding to the IRQ vector */ eq = phba->sli4_hba.hba_eq_hdl[i].eq; if (!eq) continue; list_for_each_entry(cq, &eq->child_list, list) cq->max_proc_limit = min(phba->cfg_cq_max_proc_limit, cq->entry_count); } return strlen(buf); } /* * lpfc_cq_max_proc_limit: The maximum number CQE entries processed in an * itteration of CQ processing. */ static int lpfc_cq_max_proc_limit = LPFC_CQ_DEF_MAX_PROC_LIMIT; module_param(lpfc_cq_max_proc_limit, int, 0644); MODULE_PARM_DESC(lpfc_cq_max_proc_limit, "Set the maximum number CQEs processed in an iteration of " "CQ processing"); lpfc_param_show(cq_max_proc_limit) /* * lpfc_cq_poll_threshold: Set the threshold of CQE completions in a * single handler call which should request a polled completion rather * than re-enabling interrupts. */ LPFC_ATTR_RW(cq_poll_threshold, LPFC_CQ_DEF_THRESHOLD_TO_POLL, LPFC_CQ_MIN_THRESHOLD_TO_POLL, LPFC_CQ_MAX_THRESHOLD_TO_POLL, "CQE Processing Threshold to enable Polling"); /** * lpfc_cq_max_proc_limit_init - Set the initial cq max_proc_limit * @phba: lpfc_hba pointer. * @val: entry limit * * Description: * If val is in a valid range, then initialize the adapter's maximum * value. * * Returns: * Always returns 0 for success, even if value not always set to * requested value. If value out of range or not supported, will fall * back to default. **/ static int lpfc_cq_max_proc_limit_init(struct lpfc_hba *phba, int val) { phba->cfg_cq_max_proc_limit = LPFC_CQ_DEF_MAX_PROC_LIMIT; if (phba->sli_rev != LPFC_SLI_REV4) return 0; if (val >= LPFC_CQ_MIN_PROC_LIMIT && val <= LPFC_CQ_MAX_PROC_LIMIT) { phba->cfg_cq_max_proc_limit = val; return 0; } lpfc_printf_log(phba, KERN_ERR, LOG_INIT, "0371 lpfc_cq_max_proc_limit: %d out of range, using " "default\n", phba->cfg_cq_max_proc_limit); return 0; } static DEVICE_ATTR_RW(lpfc_cq_max_proc_limit); /** * lpfc_fcp_cpu_map_show - Display current driver CPU affinity * @dev: class converted to a Scsi_host structure. * @attr: device attribute, not used. * @buf: on return contains text describing the state of the link. * * Returns: size of formatted string. **/ static ssize_t lpfc_fcp_cpu_map_show(struct device *dev, struct device_attribute *attr, char *buf) { struct Scsi_Host *shost = class_to_shost(dev); struct lpfc_vport *vport = (struct lpfc_vport *)shost->hostdata; struct lpfc_hba *phba = vport->phba; struct lpfc_vector_map_info *cpup; int len = 0; if ((phba->sli_rev != LPFC_SLI_REV4) || (phba->intr_type != MSIX)) return len; switch (phba->cfg_fcp_cpu_map) { case 0: len += scnprintf(buf + len, PAGE_SIZE-len, "fcp_cpu_map: No mapping (%d)\n", phba->cfg_fcp_cpu_map); return len; case 1: len += scnprintf(buf + len, PAGE_SIZE-len, "fcp_cpu_map: HBA centric mapping (%d): " "%d of %d CPUs online from %d possible CPUs\n", phba->cfg_fcp_cpu_map, num_online_cpus(), num_present_cpus(), phba->sli4_hba.num_possible_cpu); break; } while (phba->sli4_hba.curr_disp_cpu < phba->sli4_hba.num_possible_cpu) { cpup = &phba->sli4_hba.cpu_map[phba->sli4_hba.curr_disp_cpu]; if (!cpu_present(phba->sli4_hba.curr_disp_cpu)) len += scnprintf(buf + len, PAGE_SIZE - len, "CPU %02d not present\n", phba->sli4_hba.curr_disp_cpu); else if (cpup->eq == LPFC_VECTOR_MAP_EMPTY) { if (cpup->hdwq == LPFC_VECTOR_MAP_EMPTY) len += scnprintf( buf + len, PAGE_SIZE - len, "CPU %02d hdwq None " "physid %d coreid %d ht %d ua %d\n", phba->sli4_hba.curr_disp_cpu, cpup->phys_id, cpup->core_id, (cpup->flag & LPFC_CPU_MAP_HYPER), (cpup->flag & LPFC_CPU_MAP_UNASSIGN)); else len += scnprintf( buf + len, PAGE_SIZE - len, "CPU %02d EQ None hdwq %04d " "physid %d coreid %d ht %d ua %d\n", phba->sli4_hba.curr_disp_cpu, cpup->hdwq, cpup->phys_id, cpup->core_id, (cpup->flag & LPFC_CPU_MAP_HYPER), (cpup->flag & LPFC_CPU_MAP_UNASSIGN)); } else { if (cpup->hdwq == LPFC_VECTOR_MAP_EMPTY) len += scnprintf( buf + len, PAGE_SIZE - len, "CPU %02d hdwq None " "physid %d coreid %d ht %d ua %d IRQ %d\n", phba->sli4_hba.curr_disp_cpu, cpup->phys_id, cpup->core_id, (cpup->flag & LPFC_CPU_MAP_HYPER), (cpup->flag & LPFC_CPU_MAP_UNASSIGN), lpfc_get_irq(cpup->eq)); else len += scnprintf( buf + len, PAGE_SIZE - len, "CPU %02d EQ %04d hdwq %04d " "physid %d coreid %d ht %d ua %d IRQ %d\n", phba->sli4_hba.curr_disp_cpu, cpup->eq, cpup->hdwq, cpup->phys_id, cpup->core_id, (cpup->flag & LPFC_CPU_MAP_HYPER), (cpup->flag & LPFC_CPU_MAP_UNASSIGN), lpfc_get_irq(cpup->eq)); } phba->sli4_hba.curr_disp_cpu++; /* display max number of CPUs keeping some margin */ if (phba->sli4_hba.curr_disp_cpu < phba->sli4_hba.num_possible_cpu && (len >= (PAGE_SIZE - 64))) { len += scnprintf(buf + len, PAGE_SIZE - len, "more...\n"); break; } } if (phba->sli4_hba.curr_disp_cpu == phba->sli4_hba.num_possible_cpu) phba->sli4_hba.curr_disp_cpu = 0; return len; } /** * lpfc_fcp_cpu_map_store - Change CPU affinity of driver vectors * @dev: class device that is converted into a Scsi_host. * @attr: device attribute, not used. * @buf: one or more lpfc_polling_flags values. * @count: not used. * * Returns: * -EINVAL - Not implemented yet. **/ static ssize_t lpfc_fcp_cpu_map_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { return -EINVAL; } /* # lpfc_fcp_cpu_map: Defines how to map CPUs to IRQ vectors # for the HBA. # # Value range is [0 to 1]. Default value is LPFC_HBA_CPU_MAP (1). # 0 - Do not affinitze IRQ vectors # 1 - Affintize HBA vectors with respect to each HBA # (start with CPU0 for each HBA) # This also defines how Hardware Queues are mapped to specific CPUs. */ static int lpfc_fcp_cpu_map = LPFC_HBA_CPU_MAP; module_param(lpfc_fcp_cpu_map, int, S_IRUGO|S_IWUSR); MODULE_PARM_DESC(lpfc_fcp_cpu_map, "Defines how to map CPUs to IRQ vectors per HBA"); /** * lpfc_fcp_cpu_map_init - Set the initial sr-iov virtual function enable * @phba: lpfc_hba pointer. * @val: link speed value. * * Description: * If val is in a valid range [0-2], then affinitze the adapter's * MSIX vectors. * * Returns: * zero if val saved. * -EINVAL val out of range **/ static int lpfc_fcp_cpu_map_init(struct lpfc_hba *phba, int val) { if (phba->sli_rev != LPFC_SLI_REV4) { phba->cfg_fcp_cpu_map = 0; return 0; } if (val >= LPFC_MIN_CPU_MAP && val <= LPFC_MAX_CPU_MAP) { phba->cfg_fcp_cpu_map = val; return 0; } lpfc_printf_log(phba, KERN_ERR, LOG_INIT, "3326 lpfc_fcp_cpu_map: %d out of range, using " "default\n", val); phba->cfg_fcp_cpu_map = LPFC_HBA_CPU_MAP; return 0; } static DEVICE_ATTR_RW(lpfc_fcp_cpu_map); /* # lpfc_fcp_class: Determines FC class to use for the FCP protocol. # Value range is [2,3]. Default value is 3. */ LPFC_VPORT_ATTR_R(fcp_class, 3, 2, 3, "Select Fibre Channel class of service for FCP sequences"); /* # lpfc_use_adisc: Use ADISC for FCP rediscovery instead of PLOGI. Value range # is [0,1]. Default value is 1. */ LPFC_VPORT_ATTR_RW(use_adisc, 1, 0, 1, "Use ADISC on rediscovery to authenticate FCP devices"); /* # lpfc_first_burst_size: First burst size to use on the NPorts # that support first burst. # Value range is [0,65536]. Default value is 0. */ LPFC_VPORT_ATTR_RW(first_burst_size, 0, 0, 65536, "First burst size for Targets that support first burst"); /* * lpfc_nvmet_fb_size: NVME Target mode supported first burst size. * When the driver is configured as an NVME target, this value is * communicated to the NVME initiator in the PRLI response. It is * used only when the lpfc_nvme_enable_fb and lpfc_nvmet_support * parameters are set and the target is sending the PRLI RSP. * Parameter supported on physical port only - no NPIV support. * Value range is [0,65536]. Default value is 0. */ LPFC_ATTR_RW(nvmet_fb_size, 0, 0, 65536, "NVME Target mode first burst size in 512B increments."); /* * lpfc_nvme_enable_fb: Enable NVME first burst on I and T functions. * For the Initiator (I), enabling this parameter means that an NVMET * PRLI response with FBA enabled and an FB_SIZE set to a nonzero value will be * processed by the initiator for subsequent NVME FCP IO. * Currently, this feature is not supported on the NVME target * Value range is [0,1]. Default value is 0 (disabled). */ LPFC_ATTR_RW(nvme_enable_fb, 0, 0, 1, "Enable First Burst feature for NVME Initiator."); /* # lpfc_max_scsicmpl_time: Use scsi command completion time to control I/O queue # depth. Default value is 0. When the value of this parameter is zero the # SCSI command completion time is not used for controlling I/O queue depth. When # the parameter is set to a non-zero value, the I/O queue depth is controlled # to limit the I/O completion time to the parameter value. # The value is set in milliseconds. */ LPFC_VPORT_ATTR(max_scsicmpl_time, 0, 0, 60000, "Use command completion time to control queue depth"); lpfc_vport_param_show(max_scsicmpl_time); static int lpfc_max_scsicmpl_time_set(struct lpfc_vport *vport, int val) { struct lpfc_nodelist *ndlp, *next_ndlp; unsigned long iflags; if (val == vport->cfg_max_scsicmpl_time) return 0; if ((val < 0) || (val > 60000)) return -EINVAL; vport->cfg_max_scsicmpl_time = val; spin_lock_irqsave(&vport->fc_nodes_list_lock, iflags); list_for_each_entry_safe(ndlp, next_ndlp, &vport->fc_nodes, nlp_listp) { if (ndlp->nlp_state == NLP_STE_UNUSED_NODE) continue; ndlp->cmd_qdepth = vport->cfg_tgt_queue_depth; } spin_unlock_irqrestore(&vport->fc_nodes_list_lock, iflags); return 0; } lpfc_vport_param_store(max_scsicmpl_time); static DEVICE_ATTR_RW(lpfc_max_scsicmpl_time); /* # lpfc_ack0: Use ACK0, instead of ACK1 for class 2 acknowledgement. Value # range is [0,1]. Default value is 0. */ LPFC_ATTR_R(ack0, 0, 0, 1, "Enable ACK0 support"); /* # lpfc_xri_rebalancing: enable or disable XRI rebalancing feature # range is [0,1]. Default value is 1. */ LPFC_ATTR_R(xri_rebalancing, 1, 0, 1, "Enable/Disable XRI rebalancing"); /* * lpfc_io_sched: Determine scheduling algrithmn for issuing FCP cmds * range is [0,1]. Default value is 0. * For [0], FCP commands are issued to Work Queues based on upper layer * hardware queue index. * For [1], FCP commands are issued to a Work Queue associated with the * current CPU. * * LPFC_FCP_SCHED_BY_HDWQ == 0 * LPFC_FCP_SCHED_BY_CPU == 1 * * The driver dynamically sets this to 1 (BY_CPU) if it's able to set up cpu * affinity for FCP/NVME I/Os through Work Queues associated with the current * CPU. Otherwise, the default 0 (Round Robin) scheduling of FCP/NVME I/Os * through WQs will be used. */ LPFC_ATTR_RW(fcp_io_sched, LPFC_FCP_SCHED_BY_CPU, LPFC_FCP_SCHED_BY_HDWQ, LPFC_FCP_SCHED_BY_CPU, "Determine scheduling algorithm for " "issuing commands [0] - Hardware Queue, [1] - Current CPU"); /* * lpfc_ns_query: Determine algrithmn for NameServer queries after RSCN * range is [0,1]. Default value is 0. * For [0], GID_FT is used for NameServer queries after RSCN (default) * For [1], GID_PT is used for NameServer queries after RSCN * */ LPFC_ATTR_RW(ns_query, LPFC_NS_QUERY_GID_FT, LPFC_NS_QUERY_GID_FT, LPFC_NS_QUERY_GID_PT, "Determine algorithm NameServer queries after RSCN " "[0] - GID_FT, [1] - GID_PT"); /* # lpfc_fcp2_no_tgt_reset: Determine bus reset behavior # range is [0,1]. Default value is 0. # For [0], bus reset issues target reset to ALL devices # For [1], bus reset issues target reset to non-FCP2 devices */ LPFC_ATTR_RW(fcp2_no_tgt_reset, 0, 0, 1, "Determine bus reset behavior for " "FCP2 devices [0] - issue tgt reset, [1] - no tgt reset"); /* # lpfc_cr_delay & lpfc_cr_count: Default values for I/O colaesing # cr_delay (msec) or cr_count outstanding commands. cr_delay can take # value [0,63]. cr_count can take value [1,255]. Default value of cr_delay # is 0. Default value of cr_count is 1. The cr_count feature is disabled if # cr_delay is set to 0. */ LPFC_ATTR_RW(cr_delay, 0, 0, 63, "A count of milliseconds after which an " "interrupt response is generated"); LPFC_ATTR_RW(cr_count, 1, 1, 255, "A count of I/O completions after which an " "interrupt response is generated"); /* # lpfc_multi_ring_support: Determines how many rings to spread available # cmd/rsp IOCB entries across. # Value range is [1,2]. Default value is 1. */ LPFC_ATTR_R(multi_ring_support, 1, 1, 2, "Determines number of primary " "SLI rings to spread IOCB entries across"); /* # lpfc_multi_ring_rctl: If lpfc_multi_ring_support is enabled, this # identifies what rctl value to configure the additional ring for. # Value range is [1,0xff]. Default value is 4 (Unsolicated Data). */ LPFC_ATTR_R(multi_ring_rctl, FC_RCTL_DD_UNSOL_DATA, 1, 255, "Identifies RCTL for additional ring configuration"); /* # lpfc_multi_ring_type: If lpfc_multi_ring_support is enabled, this # identifies what type value to configure the additional ring for. # Value range is [1,0xff]. Default value is 5 (LLC/SNAP). */ LPFC_ATTR_R(multi_ring_type, FC_TYPE_IP, 1, 255, "Identifies TYPE for additional ring configuration"); /* # lpfc_enable_SmartSAN: Sets up FDMI support for SmartSAN # 0 = SmartSAN functionality disabled (default) # 1 = SmartSAN functionality enabled # This parameter will override the value of lpfc_fdmi_on module parameter. # Value range is [0,1]. Default value is 0. */ LPFC_ATTR_R(enable_SmartSAN, 0, 0, 1, "Enable SmartSAN functionality"); /* # lpfc_fdmi_on: Controls FDMI support. # 0 No FDMI support # 1 Traditional FDMI support (default) # Traditional FDMI support means the driver will assume FDMI-2 support; # however, if that fails, it will fallback to FDMI-1. # If lpfc_enable_SmartSAN is set to 1, the driver ignores lpfc_fdmi_on. # If lpfc_enable_SmartSAN is set 0, the driver uses the current value of # lpfc_fdmi_on. # Value range [0,1]. Default value is 1. */ LPFC_ATTR_R(fdmi_on, 1, 0, 1, "Enable FDMI support"); /* # Specifies the maximum number of ELS cmds we can have outstanding (for # discovery). Value range is [1,64]. Default value = 32. */ LPFC_VPORT_ATTR(discovery_threads, 32, 1, 64, "Maximum number of ELS commands " "during discovery"); /* # lpfc_max_luns: maximum allowed LUN ID. This is the highest LUN ID that # will be scanned by the SCSI midlayer when sequential scanning is # used; and is also the highest LUN ID allowed when the SCSI midlayer # parses REPORT_LUN responses. The lpfc driver has no LUN count or # LUN ID limit, but the SCSI midlayer requires this field for the uses # above. The lpfc driver limits the default value to 255 for two reasons. # As it bounds the sequential scan loop, scanning for thousands of luns # on a target can take minutes of wall clock time. Additionally, # there are FC targets, such as JBODs, that only recognize 8-bits of # LUN ID. When they receive a value greater than 8 bits, they chop off # the high order bits. In other words, they see LUN IDs 0, 256, 512, # and so on all as LUN ID 0. This causes the linux kernel, which sees # valid responses at each of the LUN IDs, to believe there are multiple # devices present, when in fact, there is only 1. # A customer that is aware of their target behaviors, and the results as # indicated above, is welcome to increase the lpfc_max_luns value. # As mentioned, this value is not used by the lpfc driver, only the # SCSI midlayer. # Value range is [0,65535]. Default value is 255. # NOTE: The SCSI layer might probe all allowed LUN on some old targets. */ LPFC_VPORT_ULL_ATTR_R(max_luns, 255, 0, 65535, "Maximum allowed LUN ID"); /* # lpfc_poll_tmo: .Milliseconds driver will wait between polling FCP ring. # Value range is [1,255], default value is 10. */ LPFC_ATTR_RW(poll_tmo, 10, 1, 255, "Milliseconds driver will wait between polling FCP ring"); /* # lpfc_task_mgmt_tmo: Maximum time to wait for task management commands # to complete in seconds. Value range is [5,180], default value is 60. */ LPFC_ATTR_RW(task_mgmt_tmo, 60, 5, 180, "Maximum time to wait for task management commands to complete"); /* # lpfc_use_msi: Use MSI (Message Signaled Interrupts) in systems that # support this feature # 0 = MSI disabled # 1 = MSI enabled # 2 = MSI-X enabled (default) # Value range is [0,2]. Default value is 2. */ LPFC_ATTR_R(use_msi, 2, 0, 2, "Use Message Signaled Interrupts (1) or " "MSI-X (2), if possible"); /* * lpfc_nvme_oas: Use the oas bit when sending NVME/NVMET IOs * * 0 = NVME OAS disabled * 1 = NVME OAS enabled * * Value range is [0,1]. Default value is 0. */ LPFC_ATTR_RW(nvme_oas, 0, 0, 1, "Use OAS bit on NVME IOs"); /* * lpfc_nvme_embed_cmd: Use the oas bit when sending NVME/NVMET IOs * * 0 = Put NVME Command in SGL * 1 = Embed NVME Command in WQE (unless G7) * 2 = Embed NVME Command in WQE (force) * * Value range is [0,2]. Default value is 1. */ LPFC_ATTR_RW(nvme_embed_cmd, 1, 0, 2, "Embed NVME Command in WQE"); /* * lpfc_fcp_mq_threshold: Set the maximum number of Hardware Queues * the driver will advertise it supports to the SCSI layer. * * 0 = Set nr_hw_queues by the number of CPUs or HW queues. * 1,256 = Manually specify nr_hw_queue value to be advertised, * * Value range is [0,256]. Default value is 8. */ LPFC_ATTR_R(fcp_mq_threshold, LPFC_FCP_MQ_THRESHOLD_DEF, LPFC_FCP_MQ_THRESHOLD_MIN, LPFC_FCP_MQ_THRESHOLD_MAX, "Set the number of SCSI Queues advertised"); /* * lpfc_hdw_queue: Set the number of Hardware Queues the driver * will advertise it supports to the NVME and SCSI layers. This also * will map to the number of CQ/WQ pairs the driver will create. * * The NVME Layer will try to create this many, plus 1 administrative * hardware queue. The administrative queue will always map to WQ 0 * A hardware IO queue maps (qidx) to a specific driver CQ/WQ. * * 0 = Configure the number of hdw queues to the number of active CPUs. * 1,256 = Manually specify how many hdw queues to use. * * Value range is [0,256]. Default value is 0. */ LPFC_ATTR_R(hdw_queue, LPFC_HBA_HDWQ_DEF, LPFC_HBA_HDWQ_MIN, LPFC_HBA_HDWQ_MAX, "Set the number of I/O Hardware Queues"); #if IS_ENABLED(CONFIG_X86) /** * lpfc_cpumask_irq_mode_init - initalizes cpumask of phba based on * irq_chann_mode * @phba: Pointer to HBA context object. **/ static void lpfc_cpumask_irq_mode_init(struct lpfc_hba *phba) { unsigned int cpu, first_cpu, numa_node = NUMA_NO_NODE; const struct cpumask *sibling_mask; struct cpumask *aff_mask = &phba->sli4_hba.irq_aff_mask; cpumask_clear(aff_mask); if (phba->irq_chann_mode == NUMA_MODE) { /* Check if we're a NUMA architecture */ numa_node = dev_to_node(&phba->pcidev->dev); if (numa_node == NUMA_NO_NODE) { phba->irq_chann_mode = NORMAL_MODE; return; } } for_each_possible_cpu(cpu) { switch (phba->irq_chann_mode) { case NUMA_MODE: if (cpu_to_node(cpu) == numa_node) cpumask_set_cpu(cpu, aff_mask); break; case NHT_MODE: sibling_mask = topology_sibling_cpumask(cpu); first_cpu = cpumask_first(sibling_mask); if (first_cpu < nr_cpu_ids) cpumask_set_cpu(first_cpu, aff_mask); break; default: break; } } } #endif static void lpfc_assign_default_irq_chann(struct lpfc_hba *phba) { #if IS_ENABLED(CONFIG_X86) switch (boot_cpu_data.x86_vendor) { case X86_VENDOR_AMD: /* If AMD architecture, then default is NUMA_MODE */ phba->irq_chann_mode = NUMA_MODE; break; case X86_VENDOR_INTEL: /* If Intel architecture, then default is no hyperthread mode */ phba->irq_chann_mode = NHT_MODE; break; default: phba->irq_chann_mode = NORMAL_MODE; break; } lpfc_cpumask_irq_mode_init(phba); #else phba->irq_chann_mode = NORMAL_MODE; #endif } /* * lpfc_irq_chann: Set the number of IRQ vectors that are available * for Hardware Queues to utilize. This also will map to the number * of EQ / MSI-X vectors the driver will create. This should never be * more than the number of Hardware Queues * * 0 = Configure number of IRQ Channels to: * if AMD architecture, number of CPUs on HBA's NUMA node * if Intel architecture, number of physical CPUs. * otherwise, number of active CPUs. * [1,256] = Manually specify how many IRQ Channels to use. * * Value range is [0,256]. Default value is [0]. */ static uint lpfc_irq_chann = LPFC_IRQ_CHANN_DEF; module_param(lpfc_irq_chann, uint, 0444); MODULE_PARM_DESC(lpfc_irq_chann, "Set number of interrupt vectors to allocate"); /* lpfc_irq_chann_init - Set the hba irq_chann initial value * @phba: lpfc_hba pointer. * @val: contains the initial value * * Description: * Validates the initial value is within range and assigns it to the * adapter. If not in range, an error message is posted and the * default value is assigned. * * Returns: * zero if value is in range and is set * -EINVAL if value was out of range **/ static int lpfc_irq_chann_init(struct lpfc_hba *phba, uint32_t val) { const struct cpumask *aff_mask; if (phba->cfg_use_msi != 2) { lpfc_printf_log(phba, KERN_INFO, LOG_INIT, "8532 use_msi = %u ignoring cfg_irq_numa\n", phba->cfg_use_msi); phba->irq_chann_mode = NORMAL_MODE; phba->cfg_irq_chann = LPFC_IRQ_CHANN_DEF; return 0; } /* Check if default setting was passed */ if (val == LPFC_IRQ_CHANN_DEF && phba->cfg_hdw_queue == LPFC_HBA_HDWQ_DEF && phba->sli_rev == LPFC_SLI_REV4) lpfc_assign_default_irq_chann(phba); if (phba->irq_chann_mode != NORMAL_MODE) { aff_mask = &phba->sli4_hba.irq_aff_mask; if (cpumask_empty(aff_mask)) { lpfc_printf_log(phba, KERN_INFO, LOG_INIT, "8533 Could not identify CPUS for " "mode %d, ignoring\n", phba->irq_chann_mode); phba->irq_chann_mode = NORMAL_MODE; phba->cfg_irq_chann = LPFC_IRQ_CHANN_DEF; } else { phba->cfg_irq_chann = cpumask_weight(aff_mask); /* If no hyperthread mode, then set hdwq count to * aff_mask weight as well */ if (phba->irq_chann_mode == NHT_MODE) phba->cfg_hdw_queue = phba->cfg_irq_chann; lpfc_printf_log(phba, KERN_INFO, LOG_INIT, "8543 lpfc_irq_chann set to %u " "(mode: %d)\n", phba->cfg_irq_chann, phba->irq_chann_mode); } } else { if (val > LPFC_IRQ_CHANN_MAX) { lpfc_printf_log(phba, KERN_INFO, LOG_INIT, "8545 lpfc_irq_chann attribute cannot " "be set to %u, allowed range is " "[%u,%u]\n", val, LPFC_IRQ_CHANN_MIN, LPFC_IRQ_CHANN_MAX); phba->cfg_irq_chann = LPFC_IRQ_CHANN_DEF; return -EINVAL; } if (phba->sli_rev == LPFC_SLI_REV4) { phba->cfg_irq_chann = val; } else { phba->cfg_irq_chann = 2; phba->cfg_hdw_queue = 1; } } return 0; } /** * lpfc_irq_chann_show - Display value of irq_chann * @dev: class converted to a Scsi_host structure. * @attr: device attribute, not used. * @buf: on return contains a string with the list sizes * * Returns: size of formatted string. **/ static ssize_t lpfc_irq_chann_show(struct device *dev, struct device_attribute *attr, char *buf) { struct Scsi_Host *shost = class_to_shost(dev); struct lpfc_vport *vport = (struct lpfc_vport *)shost->hostdata; struct lpfc_hba *phba = vport->phba; return scnprintf(buf, PAGE_SIZE, "%u\n", phba->cfg_irq_chann); } static DEVICE_ATTR_RO(lpfc_irq_chann); /* # lpfc_enable_hba_reset: Allow or prevent HBA resets to the hardware. # 0 = HBA resets disabled # 1 = HBA resets enabled (default) # 2 = HBA reset via PCI bus reset enabled # Value range is [0,2]. Default value is 1. */ LPFC_ATTR_RW(enable_hba_reset, 1, 0, 2, "Enable HBA resets from the driver."); /* # lpfc_enable_hba_heartbeat: Disable HBA heartbeat timer.. # 0 = HBA Heartbeat disabled # 1 = HBA Heartbeat enabled (default) # Value range is [0,1]. Default value is 1. */ LPFC_ATTR_R(enable_hba_heartbeat, 0, 0, 1, "Enable HBA Heartbeat."); /* # lpfc_EnableXLane: Enable Express Lane Feature # 0x0 Express Lane Feature disabled # 0x1 Express Lane Feature enabled # Value range is [0,1]. Default value is 0. */ LPFC_ATTR_R(EnableXLane, 0, 0, 1, "Enable Express Lane Feature."); /* # lpfc_XLanePriority: Define CS_CTL priority for Express Lane Feature # 0x0 - 0x7f = CS_CTL field in FC header (high 7 bits) # Value range is [0x0,0x7f]. Default value is 0 */ LPFC_ATTR_RW(XLanePriority, 0, 0x0, 0x7f, "CS_CTL for Express Lane Feature."); /* # lpfc_enable_bg: Enable BlockGuard (Emulex's Implementation of T10-DIF) # 0 = BlockGuard disabled (default) # 1 = BlockGuard enabled # Value range is [0,1]. Default value is 0. */ LPFC_ATTR_R(enable_bg, 0, 0, 1, "Enable BlockGuard Support"); /* # lpfc_prot_mask: # - Bit mask of host protection capabilities used to register with the # SCSI mid-layer # - Only meaningful if BG is turned on (lpfc_enable_bg=1). # - Allows you to ultimately specify which profiles to use # - Default will result in registering capabilities for all profiles. # - SHOST_DIF_TYPE1_PROTECTION 1 # HBA supports T10 DIF Type 1: HBA to Target Type 1 Protection # - SHOST_DIX_TYPE0_PROTECTION 8 # HBA supports DIX Type 0: Host to HBA protection only # - SHOST_DIX_TYPE1_PROTECTION 16 # HBA supports DIX Type 1: Host to HBA Type 1 protection # */ LPFC_ATTR(prot_mask, (SHOST_DIF_TYPE1_PROTECTION | SHOST_DIX_TYPE0_PROTECTION | SHOST_DIX_TYPE1_PROTECTION), 0, (SHOST_DIF_TYPE1_PROTECTION | SHOST_DIX_TYPE0_PROTECTION | SHOST_DIX_TYPE1_PROTECTION), "T10-DIF host protection capabilities mask"); /* # lpfc_prot_guard: # - Bit mask of protection guard types to register with the SCSI mid-layer # - Guard types are currently either 1) T10-DIF CRC 2) IP checksum # - Allows you to ultimately specify which profiles to use # - Default will result in registering capabilities for all guard types # */ LPFC_ATTR(prot_guard, SHOST_DIX_GUARD_IP, SHOST_DIX_GUARD_CRC, SHOST_DIX_GUARD_IP, "T10-DIF host protection guard type"); /* * Delay initial NPort discovery when Clean Address bit is cleared in * FLOGI/FDISC accept and FCID/Fabric name/Fabric portname is changed. * This parameter can have value 0 or 1. * When this parameter is set to 0, no delay is added to the initial * discovery. * When this parameter is set to non-zero value, initial Nport discovery is * delayed by ra_tov seconds when Clean Address bit is cleared in FLOGI/FDISC * accept and FCID/Fabric name/Fabric portname is changed. * Driver always delay Nport discovery for subsequent FLOGI/FDISC completion * when Clean Address bit is cleared in FLOGI/FDISC * accept and FCID/Fabric name/Fabric portname is changed. * Default value is 0. */ LPFC_ATTR(delay_discovery, 0, 0, 1, "Delay NPort discovery when Clean Address bit is cleared."); /* * lpfc_sg_seg_cnt - Initial Maximum DMA Segment Count * This value can be set to values between 64 and 4096. The default value * is 64, but may be increased to allow for larger Max I/O sizes. The scsi * and nvme layers will allow I/O sizes up to (MAX_SEG_COUNT * SEG_SIZE). * Because of the additional overhead involved in setting up T10-DIF, * this parameter will be limited to 128 if BlockGuard is enabled under SLI4 * and will be limited to 512 if BlockGuard is enabled under SLI3. */ static uint lpfc_sg_seg_cnt = LPFC_DEFAULT_SG_SEG_CNT; module_param(lpfc_sg_seg_cnt, uint, 0444); MODULE_PARM_DESC(lpfc_sg_seg_cnt, "Max Scatter Gather Segment Count"); /** * lpfc_sg_seg_cnt_show - Display the scatter/gather list sizes * configured for the adapter * @dev: class converted to a Scsi_host structure. * @attr: device attribute, not used. * @buf: on return contains a string with the list sizes * * Returns: size of formatted string. **/ static ssize_t lpfc_sg_seg_cnt_show(struct device *dev, struct device_attribute *attr, char *buf) { struct Scsi_Host *shost = class_to_shost(dev); struct lpfc_vport *vport = (struct lpfc_vport *)shost->hostdata; struct lpfc_hba *phba = vport->phba; int len; len = scnprintf(buf, PAGE_SIZE, "SGL sz: %d total SGEs: %d\n", phba->cfg_sg_dma_buf_size, phba->cfg_total_seg_cnt); len += scnprintf(buf + len, PAGE_SIZE - len, "Cfg: %d SCSI: %d NVME: %d\n", phba->cfg_sg_seg_cnt, phba->cfg_scsi_seg_cnt, phba->cfg_nvme_seg_cnt); return len; } static DEVICE_ATTR_RO(lpfc_sg_seg_cnt); /** * lpfc_sg_seg_cnt_init - Set the hba sg_seg_cnt initial value * @phba: lpfc_hba pointer. * @val: contains the initial value * * Description: * Validates the initial value is within range and assigns it to the * adapter. If not in range, an error message is posted and the * default value is assigned. * * Returns: * zero if value is in range and is set * -EINVAL if value was out of range **/ static int lpfc_sg_seg_cnt_init(struct lpfc_hba *phba, int val) { if (val >= LPFC_MIN_SG_SEG_CNT && val <= LPFC_MAX_SG_SEG_CNT) { phba->cfg_sg_seg_cnt = val; return 0; } lpfc_printf_log(phba, KERN_ERR, LOG_INIT, "0409 lpfc_sg_seg_cnt attribute cannot be set to %d, " "allowed range is [%d, %d]\n", val, LPFC_MIN_SG_SEG_CNT, LPFC_MAX_SG_SEG_CNT); phba->cfg_sg_seg_cnt = LPFC_DEFAULT_SG_SEG_CNT; return -EINVAL; } /* * lpfc_enable_mds_diags: Enable MDS Diagnostics * 0 = MDS Diagnostics disabled (default) * 1 = MDS Diagnostics enabled * Value range is [0,1]. Default value is 0. */ LPFC_ATTR_RW(enable_mds_diags, 0, 0, 1, "Enable MDS Diagnostics"); /* * lpfc_ras_fwlog_buffsize: Firmware logging host buffer size * 0 = Disable firmware logging (default) * [1-4] = Multiple of 1/4th Mb of host memory for FW logging * Value range [0..4]. Default value is 0 */ LPFC_ATTR(ras_fwlog_buffsize, 0, 0, 4, "Host memory for FW logging"); lpfc_param_show(ras_fwlog_buffsize); static ssize_t lpfc_ras_fwlog_buffsize_set(struct lpfc_hba *phba, uint val) { int ret = 0; enum ras_state state; if (!lpfc_rangecheck(val, 0, 4)) return -EINVAL; if (phba->cfg_ras_fwlog_buffsize == val) return 0; if (phba->cfg_ras_fwlog_func != PCI_FUNC(phba->pcidev->devfn)) return -EINVAL; spin_lock_irq(&phba->ras_fwlog_lock); state = phba->ras_fwlog.state; spin_unlock_irq(&phba->ras_fwlog_lock); if (state == REG_INPROGRESS) { lpfc_printf_log(phba, KERN_ERR, LOG_SLI, "6147 RAS Logging " "registration is in progress\n"); return -EBUSY; } /* For disable logging: stop the logs and free the DMA. * For ras_fwlog_buffsize size change we still need to free and * reallocate the DMA in lpfc_sli4_ras_fwlog_init. */ phba->cfg_ras_fwlog_buffsize = val; if (state == ACTIVE) { lpfc_ras_stop_fwlog(phba); lpfc_sli4_ras_dma_free(phba); } lpfc_sli4_ras_init(phba); if (phba->ras_fwlog.ras_enabled) ret = lpfc_sli4_ras_fwlog_init(phba, phba->cfg_ras_fwlog_level, LPFC_RAS_ENABLE_LOGGING); return ret; } lpfc_param_store(ras_fwlog_buffsize); static DEVICE_ATTR_RW(lpfc_ras_fwlog_buffsize); /* * lpfc_ras_fwlog_level: Firmware logging verbosity level * Valid only if firmware logging is enabled * 0(Least Verbosity) 4 (most verbosity) * Value range is [0..4]. Default value is 0 */ LPFC_ATTR_RW(ras_fwlog_level, 0, 0, 4, "Firmware Logging Level"); /* * lpfc_ras_fwlog_func: Firmware logging enabled on function number * Default function which has RAS support : 0 * Value Range is [0..3]. * FW logging is a global action and enablement is via a specific * port. */ LPFC_ATTR_RW(ras_fwlog_func, 0, 0, 3, "Firmware Logging Enabled on Function"); /* * lpfc_enable_bbcr: Enable BB Credit Recovery * 0 = BB Credit Recovery disabled * 1 = BB Credit Recovery enabled (default) * Value range is [0,1]. Default value is 1. */ LPFC_BBCR_ATTR_RW(enable_bbcr, 1, 0, 1, "Enable BBC Recovery"); /* Signaling module parameters */ int lpfc_fabric_cgn_frequency = 100; /* 100 ms default */ module_param(lpfc_fabric_cgn_frequency, int, 0444); MODULE_PARM_DESC(lpfc_fabric_cgn_frequency, "Congestion signaling fabric freq"); unsigned char lpfc_acqe_cgn_frequency = 10; /* 10 sec default */ module_param(lpfc_acqe_cgn_frequency, byte, 0444); MODULE_PARM_DESC(lpfc_acqe_cgn_frequency, "Congestion signaling ACQE freq"); int lpfc_use_cgn_signal = 1; /* 0 - only use FPINs, 1 - Use signals if avail */ module_param(lpfc_use_cgn_signal, int, 0444); MODULE_PARM_DESC(lpfc_use_cgn_signal, "Use Congestion signaling if available"); /* * lpfc_enable_dpp: Enable DPP on G7 * 0 = DPP on G7 disabled * 1 = DPP on G7 enabled (default) * Value range is [0,1]. Default value is 1. */ LPFC_ATTR_RW(enable_dpp, 1, 0, 1, "Enable Direct Packet Push"); /* * lpfc_enable_mi: Enable FDMI MIB * 0 = disabled * 1 = enabled (default) * Value range is [0,1]. */ LPFC_ATTR_R(enable_mi, 1, 0, 1, "Enable MI"); /* * lpfc_max_vmid: Maximum number of VMs to be tagged. This is valid only if * either vmid_app_header or vmid_priority_tagging is enabled. * 4 - 255 = vmid support enabled for 4-255 VMs * Value range is [4,255]. */ LPFC_ATTR_R(max_vmid, LPFC_MIN_VMID, LPFC_MIN_VMID, LPFC_MAX_VMID, "Maximum number of VMs supported"); /* * lpfc_vmid_inactivity_timeout: Inactivity timeout duration in hours * 0 = Timeout is disabled * Value range is [0,24]. */ LPFC_ATTR_R(vmid_inactivity_timeout, 4, 0, 24, "Inactivity timeout in hours"); /* * lpfc_vmid_app_header: Enable App Header VMID support * 0 = Support is disabled (default) * 1 = Support is enabled * Value range is [0,1]. */ LPFC_ATTR_R(vmid_app_header, LPFC_VMID_APP_HEADER_DISABLE, LPFC_VMID_APP_HEADER_DISABLE, LPFC_VMID_APP_HEADER_ENABLE, "Enable App Header VMID support"); /* * lpfc_vmid_priority_tagging: Enable Priority Tagging VMID support * 0 = Support is disabled (default) * 1 = Allow supported targets only * 2 = Allow all targets * Value range is [0,2]. */ LPFC_ATTR_R(vmid_priority_tagging, LPFC_VMID_PRIO_TAG_DISABLE, LPFC_VMID_PRIO_TAG_DISABLE, LPFC_VMID_PRIO_TAG_ALL_TARGETS, "Enable Priority Tagging VMID support"); static struct attribute *lpfc_hba_attrs[] = { &dev_attr_nvme_info.attr, &dev_attr_scsi_stat.attr, &dev_attr_bg_info.attr, &dev_attr_bg_guard_err.attr, &dev_attr_bg_apptag_err.attr, &dev_attr_bg_reftag_err.attr, &dev_attr_info.attr, &dev_attr_serialnum.attr, &dev_attr_modeldesc.attr, &dev_attr_modelname.attr, &dev_attr_programtype.attr, &dev_attr_portnum.attr, &dev_attr_fwrev.attr, &dev_attr_hdw.attr, &dev_attr_option_rom_version.attr, &dev_attr_link_state.attr, &dev_attr_num_discovered_ports.attr, &dev_attr_lpfc_drvr_version.attr, &dev_attr_lpfc_enable_fip.attr, &dev_attr_lpfc_temp_sensor.attr, &dev_attr_lpfc_log_verbose.attr, &dev_attr_lpfc_lun_queue_depth.attr, &dev_attr_lpfc_tgt_queue_depth.attr, &dev_attr_lpfc_hba_queue_depth.attr, &dev_attr_lpfc_peer_port_login.attr, &dev_attr_lpfc_nodev_tmo.attr, &dev_attr_lpfc_devloss_tmo.attr, &dev_attr_lpfc_enable_fc4_type.attr, &dev_attr_lpfc_fcp_class.attr, &dev_attr_lpfc_use_adisc.attr, &dev_attr_lpfc_first_burst_size.attr, &dev_attr_lpfc_ack0.attr, &dev_attr_lpfc_xri_rebalancing.attr, &dev_attr_lpfc_topology.attr, &dev_attr_lpfc_scan_down.attr, &dev_attr_lpfc_link_speed.attr, &dev_attr_lpfc_fcp_io_sched.attr, &dev_attr_lpfc_ns_query.attr, &dev_attr_lpfc_fcp2_no_tgt_reset.attr, &dev_attr_lpfc_cr_delay.attr, &dev_attr_lpfc_cr_count.attr, &dev_attr_lpfc_multi_ring_support.attr, &dev_attr_lpfc_multi_ring_rctl.attr, &dev_attr_lpfc_multi_ring_type.attr, &dev_attr_lpfc_fdmi_on.attr, &dev_attr_lpfc_enable_SmartSAN.attr, &dev_attr_lpfc_max_luns.attr, &dev_attr_lpfc_enable_npiv.attr, &dev_attr_lpfc_fcf_failover_policy.attr, &dev_attr_lpfc_enable_rrq.attr, &dev_attr_lpfc_fcp_wait_abts_rsp.attr, &dev_attr_nport_evt_cnt.attr, &dev_attr_board_mode.attr, &dev_attr_lpfc_xcvr_data.attr, &dev_attr_max_vpi.attr, &dev_attr_used_vpi.attr, &dev_attr_max_rpi.attr, &dev_attr_used_rpi.attr, &dev_attr_max_xri.attr, &dev_attr_used_xri.attr, &dev_attr_npiv_info.attr, &dev_attr_issue_reset.attr, &dev_attr_lpfc_poll.attr, &dev_attr_lpfc_poll_tmo.attr, &dev_attr_lpfc_task_mgmt_tmo.attr, &dev_attr_lpfc_use_msi.attr, &dev_attr_lpfc_nvme_oas.attr, &dev_attr_lpfc_nvme_embed_cmd.attr, &dev_attr_lpfc_fcp_imax.attr, &dev_attr_lpfc_force_rscn.attr, &dev_attr_lpfc_cq_poll_threshold.attr, &dev_attr_lpfc_cq_max_proc_limit.attr, &dev_attr_lpfc_fcp_cpu_map.attr, &dev_attr_lpfc_fcp_mq_threshold.attr, &dev_attr_lpfc_hdw_queue.attr, &dev_attr_lpfc_irq_chann.attr, &dev_attr_lpfc_suppress_rsp.attr, &dev_attr_lpfc_nvmet_mrq.attr, &dev_attr_lpfc_nvmet_mrq_post.attr, &dev_attr_lpfc_nvme_enable_fb.attr, &dev_attr_lpfc_nvmet_fb_size.attr, &dev_attr_lpfc_enable_bg.attr, &dev_attr_lpfc_enable_hba_reset.attr, &dev_attr_lpfc_enable_hba_heartbeat.attr, &dev_attr_lpfc_EnableXLane.attr, &dev_attr_lpfc_XLanePriority.attr, &dev_attr_lpfc_xlane_lun.attr, &dev_attr_lpfc_xlane_tgt.attr, &dev_attr_lpfc_xlane_vpt.attr, &dev_attr_lpfc_xlane_lun_state.attr, &dev_attr_lpfc_xlane_lun_status.attr, &dev_attr_lpfc_xlane_priority.attr, &dev_attr_lpfc_sg_seg_cnt.attr, &dev_attr_lpfc_max_scsicmpl_time.attr, &dev_attr_lpfc_aer_support.attr, &dev_attr_lpfc_aer_state_cleanup.attr, &dev_attr_lpfc_sriov_nr_virtfn.attr, &dev_attr_lpfc_req_fw_upgrade.attr, &dev_attr_lpfc_suppress_link_up.attr, &dev_attr_iocb_hw.attr, &dev_attr_pls.attr, &dev_attr_pt.attr, &dev_attr_txq_hw.attr, &dev_attr_txcmplq_hw.attr, &dev_attr_lpfc_sriov_hw_max_virtfn.attr, &dev_attr_protocol.attr, &dev_attr_lpfc_xlane_supported.attr, &dev_attr_lpfc_enable_mds_diags.attr, &dev_attr_lpfc_ras_fwlog_buffsize.attr, &dev_attr_lpfc_ras_fwlog_level.attr, &dev_attr_lpfc_ras_fwlog_func.attr, &dev_attr_lpfc_enable_bbcr.attr, &dev_attr_lpfc_enable_dpp.attr, &dev_attr_lpfc_enable_mi.attr, &dev_attr_cmf_info.attr, &dev_attr_lpfc_max_vmid.attr, &dev_attr_lpfc_vmid_inactivity_timeout.attr, &dev_attr_lpfc_vmid_app_header.attr, &dev_attr_lpfc_vmid_priority_tagging.attr, NULL, }; static const struct attribute_group lpfc_hba_attr_group = { .attrs = lpfc_hba_attrs }; const struct attribute_group *lpfc_hba_groups[] = { &lpfc_hba_attr_group, NULL }; static struct attribute *lpfc_vport_attrs[] = { &dev_attr_info.attr, &dev_attr_link_state.attr, &dev_attr_num_discovered_ports.attr, &dev_attr_lpfc_drvr_version.attr, &dev_attr_lpfc_log_verbose.attr, &dev_attr_lpfc_lun_queue_depth.attr, &dev_attr_lpfc_tgt_queue_depth.attr, &dev_attr_lpfc_nodev_tmo.attr, &dev_attr_lpfc_devloss_tmo.attr, &dev_attr_lpfc_hba_queue_depth.attr, &dev_attr_lpfc_peer_port_login.attr, &dev_attr_lpfc_restrict_login.attr, &dev_attr_lpfc_fcp_class.attr, &dev_attr_lpfc_use_adisc.attr, &dev_attr_lpfc_first_burst_size.attr, &dev_attr_lpfc_max_luns.attr, &dev_attr_nport_evt_cnt.attr, &dev_attr_npiv_info.attr, &dev_attr_lpfc_enable_da_id.attr, &dev_attr_lpfc_max_scsicmpl_time.attr, &dev_attr_lpfc_static_vport.attr, &dev_attr_cmf_info.attr, NULL, }; static const struct attribute_group lpfc_vport_attr_group = { .attrs = lpfc_vport_attrs }; const struct attribute_group *lpfc_vport_groups[] = { &lpfc_vport_attr_group, NULL }; /** * sysfs_ctlreg_write - Write method for writing to ctlreg * @filp: open sysfs file * @kobj: kernel kobject that contains the kernel class device. * @bin_attr: kernel attributes passed to us. * @buf: contains the data to be written to the adapter IOREG space. * @off: offset into buffer to beginning of data. * @count: bytes to transfer. * * Description: * Accessed via /sys/class/scsi_host/hostxxx/ctlreg. * Uses the adapter io control registers to send buf contents to the adapter. * * Returns: * -ERANGE off and count combo out of range * -EINVAL off, count or buff address invalid * -EPERM adapter is offline * value of count, buf contents written **/ static ssize_t sysfs_ctlreg_write(struct file *filp, struct kobject *kobj, struct bin_attribute *bin_attr, char *buf, loff_t off, size_t count) { size_t buf_off; struct device *dev = container_of(kobj, struct device, kobj); struct Scsi_Host *shost = class_to_shost(dev); struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata; struct lpfc_hba *phba = vport->phba; if (phba->sli_rev >= LPFC_SLI_REV4) return -EPERM; if ((off + count) > FF_REG_AREA_SIZE) return -ERANGE; if (count <= LPFC_REG_WRITE_KEY_SIZE) return 0; if (off % 4 || count % 4 || (unsigned long)buf % 4) return -EINVAL; /* This is to protect HBA registers from accidental writes. */ if (memcmp(buf, LPFC_REG_WRITE_KEY, LPFC_REG_WRITE_KEY_SIZE)) return -EINVAL; if (!test_bit(FC_OFFLINE_MODE, &vport->fc_flag)) return -EPERM; spin_lock_irq(&phba->hbalock); for (buf_off = 0; buf_off < count - LPFC_REG_WRITE_KEY_SIZE; buf_off += sizeof(uint32_t)) writel(*((uint32_t *)(buf + buf_off + LPFC_REG_WRITE_KEY_SIZE)), phba->ctrl_regs_memmap_p + off + buf_off); spin_unlock_irq(&phba->hbalock); return count; } /** * sysfs_ctlreg_read - Read method for reading from ctlreg * @filp: open sysfs file * @kobj: kernel kobject that contains the kernel class device. * @bin_attr: kernel attributes passed to us. * @buf: if successful contains the data from the adapter IOREG space. * @off: offset into buffer to beginning of data. * @count: bytes to transfer. * * Description: * Accessed via /sys/class/scsi_host/hostxxx/ctlreg. * Uses the adapter io control registers to read data into buf. * * Returns: * -ERANGE off and count combo out of range * -EINVAL off, count or buff address invalid * value of count, buf contents read **/ static ssize_t sysfs_ctlreg_read(struct file *filp, struct kobject *kobj, struct bin_attribute *bin_attr, char *buf, loff_t off, size_t count) { size_t buf_off; uint32_t * tmp_ptr; struct device *dev = container_of(kobj, struct device, kobj); struct Scsi_Host *shost = class_to_shost(dev); struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata; struct lpfc_hba *phba = vport->phba; if (phba->sli_rev >= LPFC_SLI_REV4) return -EPERM; if (off > FF_REG_AREA_SIZE) return -ERANGE; if ((off + count) > FF_REG_AREA_SIZE) count = FF_REG_AREA_SIZE - off; if (count == 0) return 0; if (off % 4 || count % 4 || (unsigned long)buf % 4) return -EINVAL; spin_lock_irq(&phba->hbalock); for (buf_off = 0; buf_off < count; buf_off += sizeof(uint32_t)) { tmp_ptr = (uint32_t *)(buf + buf_off); *tmp_ptr = readl(phba->ctrl_regs_memmap_p + off + buf_off); } spin_unlock_irq(&phba->hbalock); return count; } static struct bin_attribute sysfs_ctlreg_attr = { .attr = { .name = "ctlreg", .mode = S_IRUSR | S_IWUSR, }, .size = 256, .read = sysfs_ctlreg_read, .write = sysfs_ctlreg_write, }; /** * sysfs_mbox_write - Write method for writing information via mbox * @filp: open sysfs file * @kobj: kernel kobject that contains the kernel class device. * @bin_attr: kernel attributes passed to us. * @buf: contains the data to be written to sysfs mbox. * @off: offset into buffer to beginning of data. * @count: bytes to transfer. * * Description: * Deprecated function. All mailbox access from user space is performed via the * bsg interface. * * Returns: * -EPERM operation not permitted **/ static ssize_t sysfs_mbox_write(struct file *filp, struct kobject *kobj, struct bin_attribute *bin_attr, char *buf, loff_t off, size_t count) { return -EPERM; } /** * sysfs_mbox_read - Read method for reading information via mbox * @filp: open sysfs file * @kobj: kernel kobject that contains the kernel class device. * @bin_attr: kernel attributes passed to us. * @buf: contains the data to be read from sysfs mbox. * @off: offset into buffer to beginning of data. * @count: bytes to transfer. * * Description: * Deprecated function. All mailbox access from user space is performed via the * bsg interface. * * Returns: * -EPERM operation not permitted **/ static ssize_t sysfs_mbox_read(struct file *filp, struct kobject *kobj, struct bin_attribute *bin_attr, char *buf, loff_t off, size_t count) { return -EPERM; } static struct bin_attribute sysfs_mbox_attr = { .attr = { .name = "mbox", .mode = S_IRUSR | S_IWUSR, }, .size = MAILBOX_SYSFS_MAX, .read = sysfs_mbox_read, .write = sysfs_mbox_write, }; /** * lpfc_alloc_sysfs_attr - Creates the ctlreg and mbox entries * @vport: address of lpfc vport structure. * * Return codes: * zero on success * error return code from sysfs_create_bin_file() **/ int lpfc_alloc_sysfs_attr(struct lpfc_vport *vport) { struct Scsi_Host *shost = lpfc_shost_from_vport(vport); int error; /* Virtual ports do not need ctrl_reg and mbox */ if (vport->port_type == LPFC_NPIV_PORT) return 0; error = sysfs_create_bin_file(&shost->shost_dev.kobj, &sysfs_ctlreg_attr); if (error) goto out; error = sysfs_create_bin_file(&shost->shost_dev.kobj, &sysfs_mbox_attr); if (error) goto out_remove_ctlreg_attr; return 0; out_remove_ctlreg_attr: sysfs_remove_bin_file(&shost->shost_dev.kobj, &sysfs_ctlreg_attr); out: return error; } /** * lpfc_free_sysfs_attr - Removes the ctlreg and mbox entries * @vport: address of lpfc vport structure. **/ void lpfc_free_sysfs_attr(struct lpfc_vport *vport) { struct Scsi_Host *shost = lpfc_shost_from_vport(vport); /* Virtual ports do not need ctrl_reg and mbox */ if (vport->port_type == LPFC_NPIV_PORT) return; sysfs_remove_bin_file(&shost->shost_dev.kobj, &sysfs_mbox_attr); sysfs_remove_bin_file(&shost->shost_dev.kobj, &sysfs_ctlreg_attr); } /* * Dynamic FC Host Attributes Support */ /** * lpfc_get_host_symbolic_name - Copy symbolic name into the scsi host * @shost: kernel scsi host pointer. **/ static void lpfc_get_host_symbolic_name(struct Scsi_Host *shost) { struct lpfc_vport *vport = (struct lpfc_vport *)shost->hostdata; lpfc_vport_symbolic_node_name(vport, fc_host_symbolic_name(shost), sizeof fc_host_symbolic_name(shost)); } /** * lpfc_get_host_port_id - Copy the vport DID into the scsi host port id * @shost: kernel scsi host pointer. **/ static void lpfc_get_host_port_id(struct Scsi_Host *shost) { struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata; /* note: fc_myDID already in cpu endianness */ fc_host_port_id(shost) = vport->fc_myDID; } /** * lpfc_get_host_port_type - Set the value of the scsi host port type * @shost: kernel scsi host pointer. **/ static void lpfc_get_host_port_type(struct Scsi_Host *shost) { struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata; struct lpfc_hba *phba = vport->phba; if (vport->port_type == LPFC_NPIV_PORT) { fc_host_port_type(shost) = FC_PORTTYPE_NPIV; } else if (lpfc_is_link_up(phba)) { if (phba->fc_topology == LPFC_TOPOLOGY_LOOP) { if (test_bit(FC_PUBLIC_LOOP, &vport->fc_flag)) fc_host_port_type(shost) = FC_PORTTYPE_NLPORT; else fc_host_port_type(shost) = FC_PORTTYPE_LPORT; } else { if (test_bit(FC_FABRIC, &vport->fc_flag)) fc_host_port_type(shost) = FC_PORTTYPE_NPORT; else fc_host_port_type(shost) = FC_PORTTYPE_PTP; } } else fc_host_port_type(shost) = FC_PORTTYPE_UNKNOWN; } /** * lpfc_get_host_port_state - Set the value of the scsi host port state * @shost: kernel scsi host pointer. **/ static void lpfc_get_host_port_state(struct Scsi_Host *shost) { struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata; struct lpfc_hba *phba = vport->phba; if (test_bit(FC_OFFLINE_MODE, &vport->fc_flag)) fc_host_port_state(shost) = FC_PORTSTATE_OFFLINE; else { switch (phba->link_state) { case LPFC_LINK_UNKNOWN: case LPFC_LINK_DOWN: fc_host_port_state(shost) = FC_PORTSTATE_LINKDOWN; break; case LPFC_LINK_UP: case LPFC_CLEAR_LA: case LPFC_HBA_READY: /* Links up, reports port state accordingly */ if (vport->port_state < LPFC_VPORT_READY) fc_host_port_state(shost) = FC_PORTSTATE_BYPASSED; else fc_host_port_state(shost) = FC_PORTSTATE_ONLINE; break; case LPFC_HBA_ERROR: fc_host_port_state(shost) = FC_PORTSTATE_ERROR; break; default: fc_host_port_state(shost) = FC_PORTSTATE_UNKNOWN; break; } } } /** * lpfc_get_host_speed - Set the value of the scsi host speed * @shost: kernel scsi host pointer. **/ static void lpfc_get_host_speed(struct Scsi_Host *shost) { struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata; struct lpfc_hba *phba = vport->phba; if ((lpfc_is_link_up(phba)) && !test_bit(HBA_FCOE_MODE, &phba->hba_flag)) { switch(phba->fc_linkspeed) { case LPFC_LINK_SPEED_1GHZ: fc_host_speed(shost) = FC_PORTSPEED_1GBIT; break; case LPFC_LINK_SPEED_2GHZ: fc_host_speed(shost) = FC_PORTSPEED_2GBIT; break; case LPFC_LINK_SPEED_4GHZ: fc_host_speed(shost) = FC_PORTSPEED_4GBIT; break; case LPFC_LINK_SPEED_8GHZ: fc_host_speed(shost) = FC_PORTSPEED_8GBIT; break; case LPFC_LINK_SPEED_10GHZ: fc_host_speed(shost) = FC_PORTSPEED_10GBIT; break; case LPFC_LINK_SPEED_16GHZ: fc_host_speed(shost) = FC_PORTSPEED_16GBIT; break; case LPFC_LINK_SPEED_32GHZ: fc_host_speed(shost) = FC_PORTSPEED_32GBIT; break; case LPFC_LINK_SPEED_64GHZ: fc_host_speed(shost) = FC_PORTSPEED_64GBIT; break; case LPFC_LINK_SPEED_128GHZ: fc_host_speed(shost) = FC_PORTSPEED_128GBIT; break; case LPFC_LINK_SPEED_256GHZ: fc_host_speed(shost) = FC_PORTSPEED_256GBIT; break; default: fc_host_speed(shost) = FC_PORTSPEED_UNKNOWN; break; } } else if (lpfc_is_link_up(phba) && test_bit(HBA_FCOE_MODE, &phba->hba_flag)) { switch (phba->fc_linkspeed) { case LPFC_ASYNC_LINK_SPEED_1GBPS: fc_host_speed(shost) = FC_PORTSPEED_1GBIT; break; case LPFC_ASYNC_LINK_SPEED_10GBPS: fc_host_speed(shost) = FC_PORTSPEED_10GBIT; break; case LPFC_ASYNC_LINK_SPEED_20GBPS: fc_host_speed(shost) = FC_PORTSPEED_20GBIT; break; case LPFC_ASYNC_LINK_SPEED_25GBPS: fc_host_speed(shost) = FC_PORTSPEED_25GBIT; break; case LPFC_ASYNC_LINK_SPEED_40GBPS: fc_host_speed(shost) = FC_PORTSPEED_40GBIT; break; case LPFC_ASYNC_LINK_SPEED_100GBPS: fc_host_speed(shost) = FC_PORTSPEED_100GBIT; break; default: fc_host_speed(shost) = FC_PORTSPEED_UNKNOWN; break; } } else fc_host_speed(shost) = FC_PORTSPEED_UNKNOWN; } /** * lpfc_get_host_fabric_name - Set the value of the scsi host fabric name * @shost: kernel scsi host pointer. **/ static void lpfc_get_host_fabric_name (struct Scsi_Host *shost) { struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata; struct lpfc_hba *phba = vport->phba; u64 node_name; if (vport->port_state > LPFC_FLOGI && (test_bit(FC_FABRIC, &vport->fc_flag) || (phba->fc_topology == LPFC_TOPOLOGY_LOOP && test_bit(FC_PUBLIC_LOOP, &vport->fc_flag)))) node_name = wwn_to_u64(phba->fc_fabparam.nodeName.u.wwn); else /* fabric is local port if there is no F/FL_Port */ node_name = 0; fc_host_fabric_name(shost) = node_name; } /** * lpfc_get_stats - Return statistical information about the adapter * @shost: kernel scsi host pointer. * * Notes: * NULL on error for link down, no mbox pool, sli2 active, * management not allowed, memory allocation error, or mbox error. * * Returns: * NULL for error * address of the adapter host statistics **/ static struct fc_host_statistics * lpfc_get_stats(struct Scsi_Host *shost) { struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata; struct lpfc_hba *phba = vport->phba; struct lpfc_sli *psli = &phba->sli; struct fc_host_statistics *hs = &phba->link_stats; struct lpfc_lnk_stat * lso = &psli->lnk_stat_offsets; LPFC_MBOXQ_t *pmboxq; MAILBOX_t *pmb; int rc = 0; /* * prevent udev from issuing mailbox commands until the port is * configured. */ if (phba->link_state < LPFC_LINK_DOWN || !phba->mbox_mem_pool || (phba->sli.sli_flag & LPFC_SLI_ACTIVE) == 0) return NULL; if (phba->sli.sli_flag & LPFC_BLOCK_MGMT_IO) return NULL; pmboxq = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); if (!pmboxq) return NULL; memset(pmboxq, 0, sizeof (LPFC_MBOXQ_t)); pmb = &pmboxq->u.mb; pmb->mbxCommand = MBX_READ_STATUS; pmb->mbxOwner = OWN_HOST; pmboxq->ctx_buf = NULL; pmboxq->vport = vport; if (test_bit(FC_OFFLINE_MODE, &vport->fc_flag)) { rc = lpfc_sli_issue_mbox(phba, pmboxq, MBX_POLL); if (rc != MBX_SUCCESS) { mempool_free(pmboxq, phba->mbox_mem_pool); return NULL; } } else { rc = lpfc_sli_issue_mbox_wait(phba, pmboxq, phba->fc_ratov * 2); if (rc != MBX_SUCCESS) { if (rc != MBX_TIMEOUT) mempool_free(pmboxq, phba->mbox_mem_pool); return NULL; } } memset(hs, 0, sizeof (struct fc_host_statistics)); hs->tx_frames = pmb->un.varRdStatus.xmitFrameCnt; hs->rx_frames = pmb->un.varRdStatus.rcvFrameCnt; /* * The MBX_READ_STATUS returns tx_k_bytes which has to be * converted to words. * * Check if extended byte flag is set, to know when to collect upper * bits of 64 bit wide statistics counter. */ if (pmb->un.varRdStatus.xkb & RD_ST_XKB) { hs->tx_words = (u64) ((((u64)(pmb->un.varRdStatus.xmit_xkb & RD_ST_XMIT_XKB_MASK) << 32) | (u64)pmb->un.varRdStatus.xmitByteCnt) * (u64)256); hs->rx_words = (u64) ((((u64)(pmb->un.varRdStatus.rcv_xkb & RD_ST_RCV_XKB_MASK) << 32) | (u64)pmb->un.varRdStatus.rcvByteCnt) * (u64)256); } else { hs->tx_words = (uint64_t) ((uint64_t)pmb->un.varRdStatus.xmitByteCnt * (uint64_t)256); hs->rx_words = (uint64_t) ((uint64_t)pmb->un.varRdStatus.rcvByteCnt * (uint64_t)256); } memset(pmboxq, 0, sizeof (LPFC_MBOXQ_t)); pmb->mbxCommand = MBX_READ_LNK_STAT; pmb->mbxOwner = OWN_HOST; pmboxq->ctx_buf = NULL; pmboxq->vport = vport; if (test_bit(FC_OFFLINE_MODE, &vport->fc_flag)) { rc = lpfc_sli_issue_mbox(phba, pmboxq, MBX_POLL); if (rc != MBX_SUCCESS) { mempool_free(pmboxq, phba->mbox_mem_pool); return NULL; } } else { rc = lpfc_sli_issue_mbox_wait(phba, pmboxq, phba->fc_ratov * 2); if (rc != MBX_SUCCESS) { if (rc != MBX_TIMEOUT) mempool_free(pmboxq, phba->mbox_mem_pool); return NULL; } } hs->link_failure_count = pmb->un.varRdLnk.linkFailureCnt; hs->loss_of_sync_count = pmb->un.varRdLnk.lossSyncCnt; hs->loss_of_signal_count = pmb->un.varRdLnk.lossSignalCnt; hs->prim_seq_protocol_err_count = pmb->un.varRdLnk.primSeqErrCnt; hs->invalid_tx_word_count = pmb->un.varRdLnk.invalidXmitWord; hs->invalid_crc_count = pmb->un.varRdLnk.crcCnt; hs->error_frames = pmb->un.varRdLnk.crcCnt; hs->cn_sig_warn = atomic64_read(&phba->cgn_acqe_stat.warn); hs->cn_sig_alarm = atomic64_read(&phba->cgn_acqe_stat.alarm); hs->link_failure_count -= lso->link_failure_count; hs->loss_of_sync_count -= lso->loss_of_sync_count; hs->loss_of_signal_count -= lso->loss_of_signal_count; hs->prim_seq_protocol_err_count -= lso->prim_seq_protocol_err_count; hs->invalid_tx_word_count -= lso->invalid_tx_word_count; hs->invalid_crc_count -= lso->invalid_crc_count; hs->error_frames -= lso->error_frames; if (test_bit(HBA_FCOE_MODE, &phba->hba_flag)) { hs->lip_count = -1; hs->nos_count = (phba->link_events >> 1); hs->nos_count -= lso->link_events; } else if (phba->fc_topology == LPFC_TOPOLOGY_LOOP) { hs->lip_count = (phba->fc_eventTag >> 1); hs->lip_count -= lso->link_events; hs->nos_count = -1; } else { hs->lip_count = -1; hs->nos_count = (phba->fc_eventTag >> 1); hs->nos_count -= lso->link_events; } hs->dumped_frames = -1; hs->seconds_since_last_reset = ktime_get_seconds() - psli->stats_start; mempool_free(pmboxq, phba->mbox_mem_pool); return hs; } /** * lpfc_reset_stats - Copy the adapter link stats information * @shost: kernel scsi host pointer. **/ static void lpfc_reset_stats(struct Scsi_Host *shost) { struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata; struct lpfc_hba *phba = vport->phba; struct lpfc_sli *psli = &phba->sli; struct lpfc_lnk_stat *lso = &psli->lnk_stat_offsets; LPFC_MBOXQ_t *pmboxq; MAILBOX_t *pmb; int rc = 0; if (phba->sli.sli_flag & LPFC_BLOCK_MGMT_IO) return; pmboxq = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); if (!pmboxq) return; memset(pmboxq, 0, sizeof(LPFC_MBOXQ_t)); pmb = &pmboxq->u.mb; pmb->mbxCommand = MBX_READ_STATUS; pmb->mbxOwner = OWN_HOST; pmb->un.varWords[0] = 0x1; /* reset request */ pmboxq->ctx_buf = NULL; pmboxq->vport = vport; if (test_bit(FC_OFFLINE_MODE, &vport->fc_flag) || !(psli->sli_flag & LPFC_SLI_ACTIVE)) { rc = lpfc_sli_issue_mbox(phba, pmboxq, MBX_POLL); if (rc != MBX_SUCCESS) { mempool_free(pmboxq, phba->mbox_mem_pool); return; } } else { rc = lpfc_sli_issue_mbox_wait(phba, pmboxq, phba->fc_ratov * 2); if (rc != MBX_SUCCESS) { if (rc != MBX_TIMEOUT) mempool_free(pmboxq, phba->mbox_mem_pool); return; } } memset(pmboxq, 0, sizeof(LPFC_MBOXQ_t)); pmb->mbxCommand = MBX_READ_LNK_STAT; pmb->mbxOwner = OWN_HOST; pmboxq->ctx_buf = NULL; pmboxq->vport = vport; if (test_bit(FC_OFFLINE_MODE, &vport->fc_flag) || !(psli->sli_flag & LPFC_SLI_ACTIVE)) { rc = lpfc_sli_issue_mbox(phba, pmboxq, MBX_POLL); if (rc != MBX_SUCCESS) { mempool_free(pmboxq, phba->mbox_mem_pool); return; } } else { rc = lpfc_sli_issue_mbox_wait(phba, pmboxq, phba->fc_ratov * 2); if (rc != MBX_SUCCESS) { if (rc != MBX_TIMEOUT) mempool_free(pmboxq, phba->mbox_mem_pool); return; } } lso->link_failure_count = pmb->un.varRdLnk.linkFailureCnt; lso->loss_of_sync_count = pmb->un.varRdLnk.lossSyncCnt; lso->loss_of_signal_count = pmb->un.varRdLnk.lossSignalCnt; lso->prim_seq_protocol_err_count = pmb->un.varRdLnk.primSeqErrCnt; lso->invalid_tx_word_count = pmb->un.varRdLnk.invalidXmitWord; lso->invalid_crc_count = pmb->un.varRdLnk.crcCnt; lso->error_frames = pmb->un.varRdLnk.crcCnt; if (test_bit(HBA_FCOE_MODE, &phba->hba_flag)) lso->link_events = (phba->link_events >> 1); else lso->link_events = (phba->fc_eventTag >> 1); atomic64_set(&phba->cgn_acqe_stat.warn, 0); atomic64_set(&phba->cgn_acqe_stat.alarm, 0); memset(&shost_to_fc_host(shost)->fpin_stats, 0, sizeof(shost_to_fc_host(shost)->fpin_stats)); psli->stats_start = ktime_get_seconds(); mempool_free(pmboxq, phba->mbox_mem_pool); return; } /* * The LPFC driver treats linkdown handling as target loss events so there * are no sysfs handlers for link_down_tmo. */ /** * lpfc_get_node_by_target - Return the nodelist for a target * @starget: kernel scsi target pointer. * * Returns: * address of the node list if found * NULL target not found **/ static struct lpfc_nodelist * lpfc_get_node_by_target(struct scsi_target *starget) { struct Scsi_Host *shost = dev_to_shost(starget->dev.parent); struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata; struct lpfc_nodelist *ndlp; unsigned long iflags; spin_lock_irqsave(&vport->fc_nodes_list_lock, iflags); /* Search for this, mapped, target ID */ list_for_each_entry(ndlp, &vport->fc_nodes, nlp_listp) { if (ndlp->nlp_state == NLP_STE_MAPPED_NODE && starget->id == ndlp->nlp_sid) { spin_unlock_irqrestore(&vport->fc_nodes_list_lock, iflags); return ndlp; } } spin_unlock_irqrestore(&vport->fc_nodes_list_lock, iflags); return NULL; } /** * lpfc_get_starget_port_id - Set the target port id to the ndlp DID or -1 * @starget: kernel scsi target pointer. **/ static void lpfc_get_starget_port_id(struct scsi_target *starget) { struct lpfc_nodelist *ndlp = lpfc_get_node_by_target(starget); fc_starget_port_id(starget) = ndlp ? ndlp->nlp_DID : -1; } /** * lpfc_get_starget_node_name - Set the target node name * @starget: kernel scsi target pointer. * * Description: Set the target node name to the ndlp node name wwn or zero. **/ static void lpfc_get_starget_node_name(struct scsi_target *starget) { struct lpfc_nodelist *ndlp = lpfc_get_node_by_target(starget); fc_starget_node_name(starget) = ndlp ? wwn_to_u64(ndlp->nlp_nodename.u.wwn) : 0; } /** * lpfc_get_starget_port_name - Set the target port name * @starget: kernel scsi target pointer. * * Description: set the target port name to the ndlp port name wwn or zero. **/ static void lpfc_get_starget_port_name(struct scsi_target *starget) { struct lpfc_nodelist *ndlp = lpfc_get_node_by_target(starget); fc_starget_port_name(starget) = ndlp ? wwn_to_u64(ndlp->nlp_portname.u.wwn) : 0; } /** * lpfc_set_rport_loss_tmo - Set the rport dev loss tmo * @rport: fc rport address. * @timeout: new value for dev loss tmo. * * Description: * If timeout is non zero set the dev_loss_tmo to timeout, else set * dev_loss_tmo to one. **/ static void lpfc_set_rport_loss_tmo(struct fc_rport *rport, uint32_t timeout) { struct lpfc_rport_data *rdata = rport->dd_data; struct lpfc_nodelist *ndlp = rdata->pnode; #if (IS_ENABLED(CONFIG_NVME_FC)) struct lpfc_nvme_rport *nrport = NULL; #endif if (timeout) rport->dev_loss_tmo = timeout; else rport->dev_loss_tmo = 1; if (!ndlp) { dev_info(&rport->dev, "Cannot find remote node to " "set rport dev loss tmo, port_id x%x\n", rport->port_id); return; } #if (IS_ENABLED(CONFIG_NVME_FC)) nrport = lpfc_ndlp_get_nrport(ndlp); if (nrport && nrport->remoteport) nvme_fc_set_remoteport_devloss(nrport->remoteport, rport->dev_loss_tmo); #endif } /* * lpfc_rport_show_function - Return rport target information * * Description: * Macro that uses field to generate a function with the name lpfc_show_rport_ * * lpfc_show_rport_##field: returns the bytes formatted in buf * @cdev: class converted to an fc_rport. * @buf: on return contains the target_field or zero. * * Returns: size of formatted string. **/ #define lpfc_rport_show_function(field, format_string, sz, cast) \ static ssize_t \ lpfc_show_rport_##field (struct device *dev, \ struct device_attribute *attr, \ char *buf) \ { \ struct fc_rport *rport = transport_class_to_rport(dev); \ struct lpfc_rport_data *rdata = rport->hostdata; \ return scnprintf(buf, sz, format_string, \ (rdata->target) ? cast rdata->target->field : 0); \ } #define lpfc_rport_rd_attr(field, format_string, sz) \ lpfc_rport_show_function(field, format_string, sz, ) \ static FC_RPORT_ATTR(field, S_IRUGO, lpfc_show_rport_##field, NULL) /** * lpfc_set_vport_symbolic_name - Set the vport's symbolic name * @fc_vport: The fc_vport who's symbolic name has been changed. * * Description: * This function is called by the transport after the @fc_vport's symbolic name * has been changed. This function re-registers the symbolic name with the * switch to propagate the change into the fabric if the vport is active. **/ static void lpfc_set_vport_symbolic_name(struct fc_vport *fc_vport) { struct lpfc_vport *vport = *(struct lpfc_vport **)fc_vport->dd_data; if (vport->port_state == LPFC_VPORT_READY) lpfc_ns_cmd(vport, SLI_CTNS_RSPN_ID, 0, 0); } /** * lpfc_hba_log_verbose_init - Set hba's log verbose level * @phba: Pointer to lpfc_hba struct. * @verbose: Verbose level to set. * * This function is called by the lpfc_get_cfgparam() routine to set the * module lpfc_log_verbose into the @phba cfg_log_verbose for use with * log message according to the module's lpfc_log_verbose parameter setting * before hba port or vport created. **/ static void lpfc_hba_log_verbose_init(struct lpfc_hba *phba, uint32_t verbose) { phba->cfg_log_verbose = verbose; } struct fc_function_template lpfc_transport_functions = { /* fixed attributes the driver supports */ .show_host_node_name = 1, .show_host_port_name = 1, .show_host_supported_classes = 1, .show_host_supported_fc4s = 1, .show_host_supported_speeds = 1, .show_host_maxframe_size = 1, .get_host_symbolic_name = lpfc_get_host_symbolic_name, .show_host_symbolic_name = 1, /* dynamic attributes the driver supports */ .get_host_port_id = lpfc_get_host_port_id, .show_host_port_id = 1, .get_host_port_type = lpfc_get_host_port_type, .show_host_port_type = 1, .get_host_port_state = lpfc_get_host_port_state, .show_host_port_state = 1, /* active_fc4s is shown but doesn't change (thus no get function) */ .show_host_active_fc4s = 1, .get_host_speed = lpfc_get_host_speed, .show_host_speed = 1, .get_host_fabric_name = lpfc_get_host_fabric_name, .show_host_fabric_name = 1, /* * The LPFC driver treats linkdown handling as target loss events * so there are no sysfs handlers for link_down_tmo. */ .get_fc_host_stats = lpfc_get_stats, .reset_fc_host_stats = lpfc_reset_stats, .dd_fcrport_size = sizeof(struct lpfc_rport_data), .show_rport_maxframe_size = 1, .show_rport_supported_classes = 1, .set_rport_dev_loss_tmo = lpfc_set_rport_loss_tmo, .show_rport_dev_loss_tmo = 1, .get_starget_port_id = lpfc_get_starget_port_id, .show_starget_port_id = 1, .get_starget_node_name = lpfc_get_starget_node_name, .show_starget_node_name = 1, .get_starget_port_name = lpfc_get_starget_port_name, .show_starget_port_name = 1, .issue_fc_host_lip = lpfc_issue_lip, .dev_loss_tmo_callbk = lpfc_dev_loss_tmo_callbk, .terminate_rport_io = lpfc_terminate_rport_io, .dd_fcvport_size = sizeof(struct lpfc_vport *), .vport_disable = lpfc_vport_disable, .set_vport_symbolic_name = lpfc_set_vport_symbolic_name, .bsg_request = lpfc_bsg_request, .bsg_timeout = lpfc_bsg_timeout, }; struct fc_function_template lpfc_vport_transport_functions = { /* fixed attributes the driver supports */ .show_host_node_name = 1, .show_host_port_name = 1, .show_host_supported_classes = 1, .show_host_supported_fc4s = 1, .show_host_supported_speeds = 1, .show_host_maxframe_size = 1, .get_host_symbolic_name = lpfc_get_host_symbolic_name, .show_host_symbolic_name = 1, /* dynamic attributes the driver supports */ .get_host_port_id = lpfc_get_host_port_id, .show_host_port_id = 1, .get_host_port_type = lpfc_get_host_port_type, .show_host_port_type = 1, .get_host_port_state = lpfc_get_host_port_state, .show_host_port_state = 1, /* active_fc4s is shown but doesn't change (thus no get function) */ .show_host_active_fc4s = 1, .get_host_speed = lpfc_get_host_speed, .show_host_speed = 1, .get_host_fabric_name = lpfc_get_host_fabric_name, .show_host_fabric_name = 1, /* * The LPFC driver treats linkdown handling as target loss events * so there are no sysfs handlers for link_down_tmo. */ .get_fc_host_stats = lpfc_get_stats, .reset_fc_host_stats = lpfc_reset_stats, .dd_fcrport_size = sizeof(struct lpfc_rport_data), .show_rport_maxframe_size = 1, .show_rport_supported_classes = 1, .set_rport_dev_loss_tmo = lpfc_set_rport_loss_tmo, .show_rport_dev_loss_tmo = 1, .get_starget_port_id = lpfc_get_starget_port_id, .show_starget_port_id = 1, .get_starget_node_name = lpfc_get_starget_node_name, .show_starget_node_name = 1, .get_starget_port_name = lpfc_get_starget_port_name, .show_starget_port_name = 1, .dev_loss_tmo_callbk = lpfc_dev_loss_tmo_callbk, .terminate_rport_io = lpfc_terminate_rport_io, .vport_disable = lpfc_vport_disable, .set_vport_symbolic_name = lpfc_set_vport_symbolic_name, }; /** * lpfc_get_hba_function_mode - Used to determine the HBA function in FCoE * Mode * @phba: lpfc_hba pointer. **/ static void lpfc_get_hba_function_mode(struct lpfc_hba *phba) { /* If the adapter supports FCoE mode */ switch (phba->pcidev->device) { case PCI_DEVICE_ID_SKYHAWK: case PCI_DEVICE_ID_SKYHAWK_VF: case PCI_DEVICE_ID_LANCER_FCOE: case PCI_DEVICE_ID_LANCER_FCOE_VF: case PCI_DEVICE_ID_ZEPHYR_DCSP: case PCI_DEVICE_ID_TIGERSHARK: case PCI_DEVICE_ID_TOMCAT: set_bit(HBA_FCOE_MODE, &phba->hba_flag); break; default: /* for others, clear the flag */ clear_bit(HBA_FCOE_MODE, &phba->hba_flag); } } /** * lpfc_get_cfgparam - Used during probe_one to init the adapter structure * @phba: lpfc_hba pointer. **/ void lpfc_get_cfgparam(struct lpfc_hba *phba) { lpfc_hba_log_verbose_init(phba, lpfc_log_verbose); lpfc_fcp_io_sched_init(phba, lpfc_fcp_io_sched); lpfc_ns_query_init(phba, lpfc_ns_query); lpfc_fcp2_no_tgt_reset_init(phba, lpfc_fcp2_no_tgt_reset); lpfc_cr_delay_init(phba, lpfc_cr_delay); lpfc_cr_count_init(phba, lpfc_cr_count); lpfc_multi_ring_support_init(phba, lpfc_multi_ring_support); lpfc_multi_ring_rctl_init(phba, lpfc_multi_ring_rctl); lpfc_multi_ring_type_init(phba, lpfc_multi_ring_type); lpfc_ack0_init(phba, lpfc_ack0); lpfc_xri_rebalancing_init(phba, lpfc_xri_rebalancing); lpfc_topology_init(phba, lpfc_topology); lpfc_link_speed_init(phba, lpfc_link_speed); lpfc_poll_tmo_init(phba, lpfc_poll_tmo); lpfc_task_mgmt_tmo_init(phba, lpfc_task_mgmt_tmo); lpfc_enable_npiv_init(phba, lpfc_enable_npiv); lpfc_fcf_failover_policy_init(phba, lpfc_fcf_failover_policy); lpfc_enable_rrq_init(phba, lpfc_enable_rrq); lpfc_fcp_wait_abts_rsp_init(phba, lpfc_fcp_wait_abts_rsp); lpfc_fdmi_on_init(phba, lpfc_fdmi_on); lpfc_enable_SmartSAN_init(phba, lpfc_enable_SmartSAN); lpfc_use_msi_init(phba, lpfc_use_msi); lpfc_nvme_oas_init(phba, lpfc_nvme_oas); lpfc_nvme_embed_cmd_init(phba, lpfc_nvme_embed_cmd); lpfc_fcp_imax_init(phba, lpfc_fcp_imax); lpfc_force_rscn_init(phba, lpfc_force_rscn); lpfc_cq_poll_threshold_init(phba, lpfc_cq_poll_threshold); lpfc_cq_max_proc_limit_init(phba, lpfc_cq_max_proc_limit); lpfc_fcp_cpu_map_init(phba, lpfc_fcp_cpu_map); lpfc_enable_hba_reset_init(phba, lpfc_enable_hba_reset); lpfc_enable_hba_heartbeat_init(phba, lpfc_enable_hba_heartbeat); lpfc_EnableXLane_init(phba, lpfc_EnableXLane); /* VMID Inits */ lpfc_max_vmid_init(phba, lpfc_max_vmid); lpfc_vmid_inactivity_timeout_init(phba, lpfc_vmid_inactivity_timeout); lpfc_vmid_app_header_init(phba, lpfc_vmid_app_header); lpfc_vmid_priority_tagging_init(phba, lpfc_vmid_priority_tagging); if (phba->sli_rev != LPFC_SLI_REV4) phba->cfg_EnableXLane = 0; lpfc_XLanePriority_init(phba, lpfc_XLanePriority); memset(phba->cfg_oas_tgt_wwpn, 0, (8 * sizeof(uint8_t))); memset(phba->cfg_oas_vpt_wwpn, 0, (8 * sizeof(uint8_t))); phba->cfg_oas_lun_state = 0; phba->cfg_oas_lun_status = 0; phba->cfg_oas_flags = 0; phba->cfg_oas_priority = 0; lpfc_enable_bg_init(phba, lpfc_enable_bg); lpfc_prot_mask_init(phba, lpfc_prot_mask); lpfc_prot_guard_init(phba, lpfc_prot_guard); if (phba->sli_rev == LPFC_SLI_REV4) phba->cfg_poll = 0; else phba->cfg_poll = lpfc_poll; /* Get the function mode */ lpfc_get_hba_function_mode(phba); /* BlockGuard allowed for FC only. */ if (phba->cfg_enable_bg && test_bit(HBA_FCOE_MODE, &phba->hba_flag)) { lpfc_printf_log(phba, KERN_INFO, LOG_INIT, "0581 BlockGuard feature not supported\n"); /* If set, clear the BlockGuard support param */ phba->cfg_enable_bg = 0; } else if (phba->cfg_enable_bg) { phba->sli3_options |= LPFC_SLI3_BG_ENABLED; } lpfc_suppress_rsp_init(phba, lpfc_suppress_rsp); lpfc_enable_fc4_type_init(phba, lpfc_enable_fc4_type); lpfc_nvmet_mrq_init(phba, lpfc_nvmet_mrq); lpfc_nvmet_mrq_post_init(phba, lpfc_nvmet_mrq_post); /* Initialize first burst. Target vs Initiator are different. */ lpfc_nvme_enable_fb_init(phba, lpfc_nvme_enable_fb); lpfc_nvmet_fb_size_init(phba, lpfc_nvmet_fb_size); lpfc_fcp_mq_threshold_init(phba, lpfc_fcp_mq_threshold); lpfc_hdw_queue_init(phba, lpfc_hdw_queue); lpfc_irq_chann_init(phba, lpfc_irq_chann); lpfc_enable_bbcr_init(phba, lpfc_enable_bbcr); lpfc_enable_dpp_init(phba, lpfc_enable_dpp); lpfc_enable_mi_init(phba, lpfc_enable_mi); phba->cgn_p.cgn_param_mode = LPFC_CFG_OFF; phba->cmf_active_mode = LPFC_CFG_OFF; if (lpfc_fabric_cgn_frequency > EDC_CG_SIGFREQ_CNT_MAX || lpfc_fabric_cgn_frequency < EDC_CG_SIGFREQ_CNT_MIN) lpfc_fabric_cgn_frequency = 100; /* 100 ms default */ if (phba->sli_rev != LPFC_SLI_REV4) { /* NVME only supported on SLI4 */ phba->nvmet_support = 0; phba->cfg_nvmet_mrq = 0; phba->cfg_enable_fc4_type = LPFC_ENABLE_FCP; phba->cfg_enable_bbcr = 0; phba->cfg_xri_rebalancing = 0; } else { /* We MUST have FCP support */ if (!(phba->cfg_enable_fc4_type & LPFC_ENABLE_FCP)) phba->cfg_enable_fc4_type |= LPFC_ENABLE_FCP; } phba->cfg_auto_imax = (phba->cfg_fcp_imax) ? 0 : 1; phba->cfg_enable_pbde = 0; /* A value of 0 means use the number of CPUs found in the system */ if (phba->cfg_hdw_queue == 0) phba->cfg_hdw_queue = phba->sli4_hba.num_present_cpu; if (phba->cfg_irq_chann == 0) phba->cfg_irq_chann = phba->sli4_hba.num_present_cpu; if (phba->cfg_irq_chann > phba->cfg_hdw_queue && phba->sli_rev == LPFC_SLI_REV4) phba->cfg_irq_chann = phba->cfg_hdw_queue; lpfc_sg_seg_cnt_init(phba, lpfc_sg_seg_cnt); lpfc_hba_queue_depth_init(phba, lpfc_hba_queue_depth); lpfc_sriov_nr_virtfn_init(phba, lpfc_sriov_nr_virtfn); lpfc_request_firmware_upgrade_init(phba, lpfc_req_fw_upgrade); lpfc_suppress_link_up_init(phba, lpfc_suppress_link_up); lpfc_delay_discovery_init(phba, lpfc_delay_discovery); lpfc_sli_mode_init(phba, lpfc_sli_mode); lpfc_enable_mds_diags_init(phba, lpfc_enable_mds_diags); lpfc_ras_fwlog_buffsize_init(phba, lpfc_ras_fwlog_buffsize); lpfc_ras_fwlog_level_init(phba, lpfc_ras_fwlog_level); lpfc_ras_fwlog_func_init(phba, lpfc_ras_fwlog_func); return; } /** * lpfc_nvme_mod_param_dep - Adjust module parameter value based on * dependencies between protocols and roles. * @phba: lpfc_hba pointer. **/ void lpfc_nvme_mod_param_dep(struct lpfc_hba *phba) { int logit = 0; if (phba->cfg_hdw_queue > phba->sli4_hba.num_present_cpu) { phba->cfg_hdw_queue = phba->sli4_hba.num_present_cpu; logit = 1; } if (phba->cfg_irq_chann > phba->sli4_hba.num_present_cpu) { phba->cfg_irq_chann = phba->sli4_hba.num_present_cpu; logit = 1; } if (phba->cfg_irq_chann > phba->cfg_hdw_queue) { phba->cfg_irq_chann = phba->cfg_hdw_queue; logit = 1; } if (logit) lpfc_printf_log(phba, KERN_ERR, LOG_SLI, "2006 Reducing Queues - CPU limitation: " "IRQ %d HDWQ %d\n", phba->cfg_irq_chann, phba->cfg_hdw_queue); if (phba->cfg_enable_fc4_type & LPFC_ENABLE_NVME && phba->nvmet_support) { phba->cfg_enable_fc4_type &= ~LPFC_ENABLE_FCP; lpfc_printf_log(phba, KERN_INFO, LOG_NVME_DISC, "6013 %s x%x fb_size x%x, fb_max x%x\n", "NVME Target PRLI ACC enable_fb ", phba->cfg_nvme_enable_fb, phba->cfg_nvmet_fb_size, LPFC_NVMET_FB_SZ_MAX); if (phba->cfg_nvme_enable_fb == 0) phba->cfg_nvmet_fb_size = 0; else { if (phba->cfg_nvmet_fb_size > LPFC_NVMET_FB_SZ_MAX) phba->cfg_nvmet_fb_size = LPFC_NVMET_FB_SZ_MAX; } if (!phba->cfg_nvmet_mrq) phba->cfg_nvmet_mrq = phba->cfg_hdw_queue; /* Adjust lpfc_nvmet_mrq to avoid running out of WQE slots */ if (phba->cfg_nvmet_mrq > phba->cfg_hdw_queue) { phba->cfg_nvmet_mrq = phba->cfg_hdw_queue; lpfc_printf_log(phba, KERN_ERR, LOG_NVME_DISC, "6018 Adjust lpfc_nvmet_mrq to %d\n", phba->cfg_nvmet_mrq); } if (phba->cfg_nvmet_mrq > LPFC_NVMET_MRQ_MAX) phba->cfg_nvmet_mrq = LPFC_NVMET_MRQ_MAX; } else { /* Not NVME Target mode. Turn off Target parameters. */ phba->nvmet_support = 0; phba->cfg_nvmet_mrq = 0; phba->cfg_nvmet_fb_size = 0; } } /** * lpfc_get_vport_cfgparam - Used during port create, init the vport structure * @vport: lpfc_vport pointer. **/ void lpfc_get_vport_cfgparam(struct lpfc_vport *vport) { lpfc_log_verbose_init(vport, lpfc_log_verbose); lpfc_lun_queue_depth_init(vport, lpfc_lun_queue_depth); lpfc_tgt_queue_depth_init(vport, lpfc_tgt_queue_depth); lpfc_devloss_tmo_init(vport, lpfc_devloss_tmo); lpfc_nodev_tmo_init(vport, lpfc_nodev_tmo); lpfc_peer_port_login_init(vport, lpfc_peer_port_login); lpfc_restrict_login_init(vport, lpfc_restrict_login); lpfc_fcp_class_init(vport, lpfc_fcp_class); lpfc_use_adisc_init(vport, lpfc_use_adisc); lpfc_first_burst_size_init(vport, lpfc_first_burst_size); lpfc_max_scsicmpl_time_init(vport, lpfc_max_scsicmpl_time); lpfc_discovery_threads_init(vport, lpfc_discovery_threads); lpfc_max_luns_init(vport, lpfc_max_luns); lpfc_scan_down_init(vport, lpfc_scan_down); lpfc_enable_da_id_init(vport, lpfc_enable_da_id); return; } |