Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 | // SPDX-License-Identifier: GPL-2.0 /* * ROHM BH1710/BH1715/BH1721/BH1750/BH1751 ambient light sensor driver * * Copyright (c) Tomasz Duszynski <tduszyns@gmail.com> * * Data sheets: * http://rohmfs.rohm.com/en/products/databook/datasheet/ic/sensor/light/bh1710fvc-e.pdf * http://rohmfs.rohm.com/en/products/databook/datasheet/ic/sensor/light/bh1715fvc-e.pdf * http://rohmfs.rohm.com/en/products/databook/datasheet/ic/sensor/light/bh1721fvc-e.pdf * http://rohmfs.rohm.com/en/products/databook/datasheet/ic/sensor/light/bh1750fvi-e.pdf * http://rohmfs.rohm.com/en/products/databook/datasheet/ic/sensor/light/bh1751fvi-e.pdf * * 7-bit I2C slave addresses: * 0x23 (ADDR pin low) * 0x5C (ADDR pin high) * */ #include <linux/delay.h> #include <linux/i2c.h> #include <linux/iio/iio.h> #include <linux/iio/sysfs.h> #include <linux/module.h> #define BH1750_POWER_DOWN 0x00 #define BH1750_ONE_TIME_H_RES_MODE 0x20 /* auto-mode for BH1721 */ #define BH1750_CHANGE_INT_TIME_H_BIT 0x40 #define BH1750_CHANGE_INT_TIME_L_BIT 0x60 enum { BH1710, BH1721, BH1750, }; struct bh1750_chip_info; struct bh1750_data { struct i2c_client *client; struct mutex lock; const struct bh1750_chip_info *chip_info; u16 mtreg; }; struct bh1750_chip_info { u16 mtreg_min; u16 mtreg_max; u16 mtreg_default; int mtreg_to_usec; int mtreg_to_scale; /* * For BH1710/BH1721 all possible integration time values won't fit * into one page so displaying is limited to every second one. * Note, that user can still write proper values which were not * listed. */ int inc; u16 int_time_low_mask; u16 int_time_high_mask; }; static const struct bh1750_chip_info bh1750_chip_info_tbl[] = { [BH1710] = { 140, 1022, 300, 400, 250000000, 2, 0x001F, 0x03E0 }, [BH1721] = { 140, 1020, 300, 400, 250000000, 2, 0x0010, 0x03E0 }, [BH1750] = { 31, 254, 69, 1740, 57500000, 1, 0x001F, 0x00E0 }, }; static int bh1750_change_int_time(struct bh1750_data *data, int usec) { int ret; u16 val; u8 regval; const struct bh1750_chip_info *chip_info = data->chip_info; if ((usec % chip_info->mtreg_to_usec) != 0) return -EINVAL; val = usec / chip_info->mtreg_to_usec; if (val < chip_info->mtreg_min || val > chip_info->mtreg_max) return -EINVAL; ret = i2c_smbus_write_byte(data->client, BH1750_POWER_DOWN); if (ret < 0) return ret; regval = (val & chip_info->int_time_high_mask) >> 5; ret = i2c_smbus_write_byte(data->client, BH1750_CHANGE_INT_TIME_H_BIT | regval); if (ret < 0) return ret; regval = val & chip_info->int_time_low_mask; ret = i2c_smbus_write_byte(data->client, BH1750_CHANGE_INT_TIME_L_BIT | regval); if (ret < 0) return ret; data->mtreg = val; return 0; } static int bh1750_read(struct bh1750_data *data, int *val) { int ret; __be16 result; const struct bh1750_chip_info *chip_info = data->chip_info; unsigned long delay = chip_info->mtreg_to_usec * data->mtreg; /* * BH1721 will enter continuous mode on receiving this command. * Note, that this eliminates need for bh1750_resume(). */ ret = i2c_smbus_write_byte(data->client, BH1750_ONE_TIME_H_RES_MODE); if (ret < 0) return ret; usleep_range(delay + 15000, delay + 40000); ret = i2c_master_recv(data->client, (char *)&result, 2); if (ret < 0) return ret; *val = be16_to_cpu(result); return 0; } static int bh1750_read_raw(struct iio_dev *indio_dev, struct iio_chan_spec const *chan, int *val, int *val2, long mask) { int ret, tmp; struct bh1750_data *data = iio_priv(indio_dev); const struct bh1750_chip_info *chip_info = data->chip_info; switch (mask) { case IIO_CHAN_INFO_RAW: switch (chan->type) { case IIO_LIGHT: mutex_lock(&data->lock); ret = bh1750_read(data, val); mutex_unlock(&data->lock); if (ret < 0) return ret; return IIO_VAL_INT; default: return -EINVAL; } case IIO_CHAN_INFO_SCALE: tmp = chip_info->mtreg_to_scale / data->mtreg; *val = tmp / 1000000; *val2 = tmp % 1000000; return IIO_VAL_INT_PLUS_MICRO; case IIO_CHAN_INFO_INT_TIME: *val = 0; *val2 = chip_info->mtreg_to_usec * data->mtreg; return IIO_VAL_INT_PLUS_MICRO; default: return -EINVAL; } } static int bh1750_write_raw(struct iio_dev *indio_dev, struct iio_chan_spec const *chan, int val, int val2, long mask) { int ret; struct bh1750_data *data = iio_priv(indio_dev); switch (mask) { case IIO_CHAN_INFO_INT_TIME: if (val != 0) return -EINVAL; mutex_lock(&data->lock); ret = bh1750_change_int_time(data, val2); mutex_unlock(&data->lock); return ret; default: return -EINVAL; } } static ssize_t bh1750_show_int_time_available(struct device *dev, struct device_attribute *attr, char *buf) { int i; size_t len = 0; struct bh1750_data *data = iio_priv(dev_to_iio_dev(dev)); const struct bh1750_chip_info *chip_info = data->chip_info; for (i = chip_info->mtreg_min; i <= chip_info->mtreg_max; i += chip_info->inc) len += scnprintf(buf + len, PAGE_SIZE - len, "0.%06d ", chip_info->mtreg_to_usec * i); buf[len - 1] = '\n'; return len; } static IIO_DEV_ATTR_INT_TIME_AVAIL(bh1750_show_int_time_available); static struct attribute *bh1750_attributes[] = { &iio_dev_attr_integration_time_available.dev_attr.attr, NULL, }; static const struct attribute_group bh1750_attribute_group = { .attrs = bh1750_attributes, }; static const struct iio_info bh1750_info = { .attrs = &bh1750_attribute_group, .read_raw = bh1750_read_raw, .write_raw = bh1750_write_raw, }; static const struct iio_chan_spec bh1750_channels[] = { { .type = IIO_LIGHT, .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE) | BIT(IIO_CHAN_INFO_INT_TIME) } }; static int bh1750_probe(struct i2c_client *client, const struct i2c_device_id *id) { int ret, usec; struct bh1750_data *data; struct iio_dev *indio_dev; if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C | I2C_FUNC_SMBUS_WRITE_BYTE)) return -EOPNOTSUPP; indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data)); if (!indio_dev) return -ENOMEM; data = iio_priv(indio_dev); i2c_set_clientdata(client, indio_dev); data->client = client; data->chip_info = &bh1750_chip_info_tbl[id->driver_data]; usec = data->chip_info->mtreg_to_usec * data->chip_info->mtreg_default; ret = bh1750_change_int_time(data, usec); if (ret < 0) return ret; mutex_init(&data->lock); indio_dev->info = &bh1750_info; indio_dev->name = id->name; indio_dev->channels = bh1750_channels; indio_dev->num_channels = ARRAY_SIZE(bh1750_channels); indio_dev->modes = INDIO_DIRECT_MODE; return iio_device_register(indio_dev); } static void bh1750_remove(struct i2c_client *client) { struct iio_dev *indio_dev = i2c_get_clientdata(client); struct bh1750_data *data = iio_priv(indio_dev); iio_device_unregister(indio_dev); mutex_lock(&data->lock); i2c_smbus_write_byte(client, BH1750_POWER_DOWN); mutex_unlock(&data->lock); } static int bh1750_suspend(struct device *dev) { int ret; struct bh1750_data *data = iio_priv(i2c_get_clientdata(to_i2c_client(dev))); /* * This is mainly for BH1721 which doesn't enter power down * mode automatically. */ mutex_lock(&data->lock); ret = i2c_smbus_write_byte(data->client, BH1750_POWER_DOWN); mutex_unlock(&data->lock); return ret; } static DEFINE_SIMPLE_DEV_PM_OPS(bh1750_pm_ops, bh1750_suspend, NULL); static const struct i2c_device_id bh1750_id[] = { { "bh1710", BH1710 }, { "bh1715", BH1750 }, { "bh1721", BH1721 }, { "bh1750", BH1750 }, { "bh1751", BH1750 }, { } }; MODULE_DEVICE_TABLE(i2c, bh1750_id); static const struct of_device_id bh1750_of_match[] = { { .compatible = "rohm,bh1710", }, { .compatible = "rohm,bh1715", }, { .compatible = "rohm,bh1721", }, { .compatible = "rohm,bh1750", }, { .compatible = "rohm,bh1751", }, { } }; MODULE_DEVICE_TABLE(of, bh1750_of_match); static struct i2c_driver bh1750_driver = { .driver = { .name = "bh1750", .of_match_table = bh1750_of_match, .pm = pm_sleep_ptr(&bh1750_pm_ops), }, .probe = bh1750_probe, .remove = bh1750_remove, .id_table = bh1750_id, }; module_i2c_driver(bh1750_driver); MODULE_AUTHOR("Tomasz Duszynski <tduszyns@gmail.com>"); MODULE_DESCRIPTION("ROHM BH1710/BH1715/BH1721/BH1750/BH1751 als driver"); MODULE_LICENSE("GPL v2"); |