Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 | // SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2017 Andreas Färber */ #include <dt-bindings/clock/actions,s900-cmu.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/reset/actions,s900-reset.h> / { compatible = "actions,s900"; interrupt-parent = <&gic>; #address-cells = <2>; #size-cells = <2>; cpus { #address-cells = <2>; #size-cells = <0>; cpu0: cpu@0 { device_type = "cpu"; compatible = "arm,cortex-a53"; reg = <0x0 0x0>; enable-method = "psci"; }; cpu1: cpu@1 { device_type = "cpu"; compatible = "arm,cortex-a53"; reg = <0x0 0x1>; enable-method = "psci"; }; cpu2: cpu@2 { device_type = "cpu"; compatible = "arm,cortex-a53"; reg = <0x0 0x2>; enable-method = "psci"; }; cpu3: cpu@3 { device_type = "cpu"; compatible = "arm,cortex-a53"; reg = <0x0 0x3>; enable-method = "psci"; }; }; reserved-memory { #address-cells = <2>; #size-cells = <2>; ranges; secmon@1f000000 { reg = <0x0 0x1f000000 0x0 0x1000000>; no-map; }; }; psci { compatible = "arm,psci-0.2"; method = "smc"; }; arm-pmu { compatible = "arm,cortex-a53-pmu"; interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; }; timer { compatible = "arm,armv8-timer"; interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; }; hosc: hosc { compatible = "fixed-clock"; clock-frequency = <24000000>; #clock-cells = <0>; }; losc: losc { compatible = "fixed-clock"; clock-frequency = <32768>; #clock-cells = <0>; }; diff24M: diff24M { compatible = "fixed-clock"; clock-frequency = <24000000>; #clock-cells = <0>; }; soc { compatible = "simple-bus"; #address-cells = <2>; #size-cells = <2>; ranges; gic: interrupt-controller@e00f1000 { compatible = "arm,gic-400"; reg = <0x0 0xe00f1000 0x0 0x1000>, <0x0 0xe00f2000 0x0 0x2000>, <0x0 0xe00f4000 0x0 0x2000>, <0x0 0xe00f6000 0x0 0x2000>; interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; interrupt-controller; #interrupt-cells = <3>; }; uart0: serial@e0120000 { compatible = "actions,s900-uart", "actions,owl-uart"; reg = <0x0 0xe0120000 0x0 0x2000>; clocks = <&cmu CLK_UART0>; interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; uart1: serial@e0122000 { compatible = "actions,s900-uart", "actions,owl-uart"; reg = <0x0 0xe0122000 0x0 0x2000>; clocks = <&cmu CLK_UART1>; interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; uart2: serial@e0124000 { compatible = "actions,s900-uart", "actions,owl-uart"; reg = <0x0 0xe0124000 0x0 0x2000>; clocks = <&cmu CLK_UART2>; interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; uart3: serial@e0126000 { compatible = "actions,s900-uart", "actions,owl-uart"; reg = <0x0 0xe0126000 0x0 0x2000>; clocks = <&cmu CLK_UART3>; interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; uart4: serial@e0128000 { compatible = "actions,s900-uart", "actions,owl-uart"; reg = <0x0 0xe0128000 0x0 0x2000>; clocks = <&cmu CLK_UART4>; interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; uart5: serial@e012a000 { compatible = "actions,s900-uart", "actions,owl-uart"; reg = <0x0 0xe012a000 0x0 0x2000>; clocks = <&cmu CLK_UART5>; interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; uart6: serial@e012c000 { compatible = "actions,s900-uart", "actions,owl-uart"; reg = <0x0 0xe012c000 0x0 0x2000>; clocks = <&cmu CLK_UART6>; interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; sps: power-controller@e012e000 { compatible = "actions,s900-sps"; reg = <0x0 0xe012e000 0x0 0x2000>; #power-domain-cells = <1>; }; cmu: clock-controller@e0160000 { compatible = "actions,s900-cmu"; reg = <0x0 0xe0160000 0x0 0x1000>; clocks = <&hosc>, <&losc>; #clock-cells = <1>; #reset-cells = <1>; }; i2c0: i2c@e0170000 { compatible = "actions,s900-i2c"; reg = <0 0xe0170000 0 0x1000>; clocks = <&cmu CLK_I2C0>; interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; }; i2c1: i2c@e0172000 { compatible = "actions,s900-i2c"; reg = <0 0xe0172000 0 0x1000>; clocks = <&cmu CLK_I2C1>; interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; }; i2c2: i2c@e0174000 { compatible = "actions,s900-i2c"; reg = <0 0xe0174000 0 0x1000>; clocks = <&cmu CLK_I2C2>; interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; }; i2c3: i2c@e0176000 { compatible = "actions,s900-i2c"; reg = <0 0xe0176000 0 0x1000>; clocks = <&cmu CLK_I2C3>; interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; }; i2c4: i2c@e0178000 { compatible = "actions,s900-i2c"; reg = <0 0xe0178000 0 0x1000>; clocks = <&cmu CLK_I2C4>; interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; }; i2c5: i2c@e017a000 { compatible = "actions,s900-i2c"; reg = <0 0xe017a000 0 0x1000>; clocks = <&cmu CLK_I2C5>; interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; }; pinctrl: pinctrl@e01b0000 { compatible = "actions,s900-pinctrl"; reg = <0x0 0xe01b0000 0x0 0x1000>; clocks = <&cmu CLK_GPIO>; gpio-controller; gpio-ranges = <&pinctrl 0 0 146>; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; }; timer: timer@e0228000 { compatible = "actions,s900-timer"; reg = <0x0 0xe0228000 0x0 0x8000>; interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "timer1"; }; dma: dma-controller@e0260000 { compatible = "actions,s900-dma"; reg = <0x0 0xe0260000 0x0 0x1000>; interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; #dma-cells = <1>; dma-channels = <12>; dma-requests = <46>; clocks = <&cmu CLK_DMAC>; }; mmc0: mmc@e0330000 { compatible = "actions,owl-mmc"; reg = <0x0 0xe0330000 0x0 0x4000>; interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cmu CLK_SD0>; resets = <&cmu RESET_SD0>; dmas = <&dma 2>; dma-names = "mmc"; status = "disabled"; }; mmc1: mmc@e0334000 { compatible = "actions,owl-mmc"; reg = <0x0 0xe0334000 0x0 0x4000>; interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cmu CLK_SD1>; resets = <&cmu RESET_SD1>; dmas = <&dma 3>; dma-names = "mmc"; status = "disabled"; }; mmc2: mmc@e0338000 { compatible = "actions,owl-mmc"; reg = <0x0 0xe0338000 0x0 0x4000>; interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cmu CLK_SD2>; resets = <&cmu RESET_SD2>; dmas = <&dma 4>; dma-names = "mmc"; status = "disabled"; }; mmc3: mmc@e033c000 { compatible = "actions,owl-mmc"; reg = <0x0 0xe033c000 0x0 0x4000>; interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cmu CLK_SD3>; resets = <&cmu RESET_SD3>; dmas = <&dma 46>; dma-names = "mmc"; status = "disabled"; }; }; }; |