Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 | # SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/net/qcom,ipa.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm IP Accelerator (IPA) maintainers: - Alex Elder <elder@kernel.org> description: This binding describes the Qualcomm IPA. The IPA is capable of offloading certain network processing tasks (e.g. filtering, routing, and NAT) from the main processor. The IPA sits between multiple independent "execution environments," including the Application Processor (AP) and the modem. The IPA presents a Generic Software Interface (GSI) to each execution environment. The GSI is an integral part of the IPA, but it is logically isolated and has a distinct interrupt and a separately-defined address space. See also soc/qcom/qcom,smp2p.txt and interconnect/interconnect.txt. See iommu/iommu.txt and iommu/arm,smmu.yaml for more information about SMMU bindings. - | -------- --------- | | | | | AP +<---. .----+ Modem | | +--. | | .->+ | | | | | | | | | -------- | | | | --------- v | v | --+-+---+-+-- | GSI | |-----------| | | | IPA | | | ------------- properties: compatible: enum: - qcom,msm8998-ipa - qcom,sc7180-ipa - qcom,sc7280-ipa - qcom,sdm845-ipa - qcom,sdx55-ipa - qcom,sm8350-ipa reg: items: - description: IPA registers - description: IPA shared memory - description: GSI registers reg-names: items: - const: ipa-reg - const: ipa-shared - const: gsi iommus: minItems: 1 maxItems: 2 clocks: maxItems: 1 clock-names: const: core interrupts: items: - description: IPA interrupt (hardware IRQ) - description: GSI interrupt (hardware IRQ) - description: Modem clock query interrupt (smp2p interrupt) - description: Modem setup ready interrupt (smp2p interrupt) interrupt-names: items: - const: ipa - const: gsi - const: ipa-clock-query - const: ipa-setup-ready interconnects: oneOf: - items: - description: Path leading to system memory - description: Path between the AP and IPA config space - items: - description: Path leading to system memory - description: Path leading to internal memory - description: Path between the AP and IPA config space interconnect-names: oneOf: - items: - const: memory - const: config - items: - const: memory - const: imem - const: config qcom,qmp: $ref: /schemas/types.yaml#/definitions/phandle description: phandle to the AOSS side-channel message RAM qcom,smem-states: $ref: /schemas/types.yaml#/definitions/phandle-array description: State bits used in by the AP to signal the modem. items: - description: Whether the "ipa-clock-enabled" state bit is valid - description: Whether the IPA clock is enabled (if valid) qcom,smem-state-names: description: The names of the state bits used for SMP2P output items: - const: ipa-clock-enabled-valid - const: ipa-clock-enabled modem-init: type: boolean description: If present, it indicates that the modem is responsible for performing early IPA initialization, including loading and validating firwmare used by the GSI. memory-region: maxItems: 1 description: If present, a phandle for a reserved memory area that holds the firmware passed to Trust Zone for authentication. Required when Trust Zone (not the modem) performs early initialization. firmware-name: $ref: /schemas/types.yaml#/definitions/string description: If present, name (or relative path) of the file within the firmware search path containing the firmware image used when initializing IPA hardware. Optional, and only used when Trust Zone performs early initialization. required: - compatible - iommus - reg - clocks - interrupts - interconnects - qcom,smem-states # Either modem-init is present, or memory-region must be present. oneOf: - required: - modem-init - required: - memory-region # If memory-region is present, firmware-name may optionally be present. # But if modem-init is present, firmware-name must not be present. if: required: - modem-init then: not: required: - firmware-name additionalProperties: false examples: - | #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/qcom,rpmh.h> #include <dt-bindings/interconnect/qcom,sdm845.h> smp2p-mpss { compatible = "qcom,smp2p"; interrupts = <GIC_SPI 576 IRQ_TYPE_EDGE_RISING>; mboxes = <&apss_shared 6>; qcom,smem = <94>, <432>; qcom,local-pid = <0>; qcom,remote-pid = <5>; ipa_smp2p_out: ipa-ap-to-modem { qcom,entry-name = "ipa"; #qcom,smem-state-cells = <1>; }; ipa_smp2p_in: ipa-modem-to-ap { qcom,entry-name = "ipa"; interrupt-controller; #interrupt-cells = <2>; }; }; ipa@1e40000 { compatible = "qcom,sdm845-ipa"; modem-init; iommus = <&apps_smmu 0x720 0x3>; reg = <0x1e40000 0x7000>, <0x1e47000 0x2000>, <0x1e04000 0x2c000>; reg-names = "ipa-reg", "ipa-shared", "gsi"; interrupts-extended = <&intc GIC_SPI 311 IRQ_TYPE_EDGE_RISING>, <&intc GIC_SPI 432 IRQ_TYPE_LEVEL_HIGH>, <&ipa_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, <&ipa_smp2p_in 1 IRQ_TYPE_EDGE_RISING>; interrupt-names = "ipa", "gsi", "ipa-clock-query", "ipa-setup-ready"; clocks = <&rpmhcc RPMH_IPA_CLK>; clock-names = "core"; interconnects = <&rsc_hlos MASTER_IPA &rsc_hlos SLAVE_EBI1>, <&rsc_hlos MASTER_IPA &rsc_hlos SLAVE_IMEM>, <&rsc_hlos MASTER_APPSS_PROC &rsc_hlos SLAVE_IPA_CFG>; interconnect-names = "memory", "imem", "config"; qcom,qmp = <&aoss_qmp>; qcom,smem-states = <&ipa_smp2p_out 0>, <&ipa_smp2p_out 1>; qcom,smem-state-names = "ipa-clock-enabled-valid", "ipa-clock-enabled"; }; |