Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 | // SPDX-License-Identifier: GPL-2.0-only /* * LM73 Sensor driver * Based on LM75 * * Copyright (C) 2007, CenoSYS (www.cenosys.com). * Copyright (C) 2009, Bollore telecom (www.bolloretelecom.eu). * * Guillaume Ligneul <guillaume.ligneul@gmail.com> * Adrien Demarez <adrien.demarez@bolloretelecom.eu> * Jeremy Laine <jeremy.laine@bolloretelecom.eu> * Chris Verges <kg4ysn@gmail.com> */ #include <linux/module.h> #include <linux/init.h> #include <linux/i2c.h> #include <linux/hwmon.h> #include <linux/hwmon-sysfs.h> #include <linux/err.h> /* Addresses scanned */ static const unsigned short normal_i2c[] = { 0x48, 0x49, 0x4a, 0x4c, 0x4d, 0x4e, I2C_CLIENT_END }; /* LM73 registers */ #define LM73_REG_INPUT 0x00 #define LM73_REG_CONF 0x01 #define LM73_REG_MAX 0x02 #define LM73_REG_MIN 0x03 #define LM73_REG_CTRL 0x04 #define LM73_REG_ID 0x07 #define LM73_ID 0x9001 /* 0x0190, byte-swapped */ #define DRVNAME "lm73" #define LM73_TEMP_MIN (-256000 / 250) #define LM73_TEMP_MAX (255750 / 250) #define LM73_CTRL_RES_SHIFT 5 #define LM73_CTRL_RES_MASK (BIT(5) | BIT(6)) #define LM73_CTRL_TO_MASK BIT(7) #define LM73_CTRL_HI_SHIFT 2 #define LM73_CTRL_LO_SHIFT 1 static const unsigned short lm73_convrates[] = { 14, /* 11-bits (0.25000 C/LSB): RES1 Bit = 0, RES0 Bit = 0 */ 28, /* 12-bits (0.12500 C/LSB): RES1 Bit = 0, RES0 Bit = 1 */ 56, /* 13-bits (0.06250 C/LSB): RES1 Bit = 1, RES0 Bit = 0 */ 112, /* 14-bits (0.03125 C/LSB): RES1 Bit = 1, RES0 Bit = 1 */ }; struct lm73_data { struct i2c_client *client; struct mutex lock; u8 ctrl; /* control register value */ }; /*-----------------------------------------------------------------------*/ static ssize_t temp_store(struct device *dev, struct device_attribute *da, const char *buf, size_t count) { struct sensor_device_attribute *attr = to_sensor_dev_attr(da); struct lm73_data *data = dev_get_drvdata(dev); long temp; short value; s32 err; int status = kstrtol(buf, 10, &temp); if (status < 0) return status; /* Write value */ value = clamp_val(temp / 250, LM73_TEMP_MIN, LM73_TEMP_MAX) << 5; err = i2c_smbus_write_word_swapped(data->client, attr->index, value); return (err < 0) ? err : count; } static ssize_t temp_show(struct device *dev, struct device_attribute *da, char *buf) { struct sensor_device_attribute *attr = to_sensor_dev_attr(da); struct lm73_data *data = dev_get_drvdata(dev); int temp; s32 err = i2c_smbus_read_word_swapped(data->client, attr->index); if (err < 0) return err; /* use integer division instead of equivalent right shift to guarantee arithmetic shift and preserve the sign */ temp = (((s16) err) * 250) / 32; return scnprintf(buf, PAGE_SIZE, "%d\n", temp); } static ssize_t convrate_store(struct device *dev, struct device_attribute *da, const char *buf, size_t count) { struct lm73_data *data = dev_get_drvdata(dev); unsigned long convrate; s32 err; int res = 0; err = kstrtoul(buf, 10, &convrate); if (err < 0) return err; /* * Convert the desired conversion rate into register bits. * res is already initialized, and everything past the second-to-last * value in the array is treated as belonging to the last value * in the array. */ while (res < (ARRAY_SIZE(lm73_convrates) - 1) && convrate > lm73_convrates[res]) res++; mutex_lock(&data->lock); data->ctrl &= LM73_CTRL_TO_MASK; data->ctrl |= res << LM73_CTRL_RES_SHIFT; err = i2c_smbus_write_byte_data(data->client, LM73_REG_CTRL, data->ctrl); mutex_unlock(&data->lock); if (err < 0) return err; return count; } static ssize_t convrate_show(struct device *dev, struct device_attribute *da, char *buf) { struct lm73_data *data = dev_get_drvdata(dev); int res; res = (data->ctrl & LM73_CTRL_RES_MASK) >> LM73_CTRL_RES_SHIFT; return scnprintf(buf, PAGE_SIZE, "%hu\n", lm73_convrates[res]); } static ssize_t maxmin_alarm_show(struct device *dev, struct device_attribute *da, char *buf) { struct sensor_device_attribute *attr = to_sensor_dev_attr(da); struct lm73_data *data = dev_get_drvdata(dev); s32 ctrl; mutex_lock(&data->lock); ctrl = i2c_smbus_read_byte_data(data->client, LM73_REG_CTRL); if (ctrl < 0) goto abort; data->ctrl = ctrl; mutex_unlock(&data->lock); return scnprintf(buf, PAGE_SIZE, "%d\n", (ctrl >> attr->index) & 1); abort: mutex_unlock(&data->lock); return ctrl; } /*-----------------------------------------------------------------------*/ /* sysfs attributes for hwmon */ static SENSOR_DEVICE_ATTR_RW(temp1_max, temp, LM73_REG_MAX); static SENSOR_DEVICE_ATTR_RW(temp1_min, temp, LM73_REG_MIN); static SENSOR_DEVICE_ATTR_RO(temp1_input, temp, LM73_REG_INPUT); static SENSOR_DEVICE_ATTR_RW(update_interval, convrate, 0); static SENSOR_DEVICE_ATTR_RO(temp1_max_alarm, maxmin_alarm, LM73_CTRL_HI_SHIFT); static SENSOR_DEVICE_ATTR_RO(temp1_min_alarm, maxmin_alarm, LM73_CTRL_LO_SHIFT); static struct attribute *lm73_attrs[] = { &sensor_dev_attr_temp1_input.dev_attr.attr, &sensor_dev_attr_temp1_max.dev_attr.attr, &sensor_dev_attr_temp1_min.dev_attr.attr, &sensor_dev_attr_update_interval.dev_attr.attr, &sensor_dev_attr_temp1_max_alarm.dev_attr.attr, &sensor_dev_attr_temp1_min_alarm.dev_attr.attr, NULL }; ATTRIBUTE_GROUPS(lm73); /*-----------------------------------------------------------------------*/ /* device probe and removal */ static int lm73_probe(struct i2c_client *client) { struct device *dev = &client->dev; struct device *hwmon_dev; struct lm73_data *data; int ctrl; data = devm_kzalloc(dev, sizeof(struct lm73_data), GFP_KERNEL); if (!data) return -ENOMEM; data->client = client; mutex_init(&data->lock); ctrl = i2c_smbus_read_byte_data(client, LM73_REG_CTRL); if (ctrl < 0) return ctrl; data->ctrl = ctrl; hwmon_dev = devm_hwmon_device_register_with_groups(dev, client->name, data, lm73_groups); if (IS_ERR(hwmon_dev)) return PTR_ERR(hwmon_dev); dev_info(dev, "sensor '%s'\n", client->name); return 0; } static const struct i2c_device_id lm73_ids[] = { { "lm73", 0 }, { /* LIST END */ } }; MODULE_DEVICE_TABLE(i2c, lm73_ids); /* Return 0 if detection is successful, -ENODEV otherwise */ static int lm73_detect(struct i2c_client *new_client, struct i2c_board_info *info) { struct i2c_adapter *adapter = new_client->adapter; int id, ctrl, conf; if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA)) return -ENODEV; /* * Do as much detection as possible with byte reads first, as word * reads can confuse other devices. */ ctrl = i2c_smbus_read_byte_data(new_client, LM73_REG_CTRL); if (ctrl < 0 || (ctrl & 0x10)) return -ENODEV; conf = i2c_smbus_read_byte_data(new_client, LM73_REG_CONF); if (conf < 0 || (conf & 0x0c)) return -ENODEV; id = i2c_smbus_read_byte_data(new_client, LM73_REG_ID); if (id < 0 || id != (LM73_ID & 0xff)) return -ENODEV; /* Check device ID */ id = i2c_smbus_read_word_data(new_client, LM73_REG_ID); if (id < 0 || id != LM73_ID) return -ENODEV; strscpy(info->type, "lm73", I2C_NAME_SIZE); return 0; } static const struct of_device_id lm73_of_match[] = { { .compatible = "ti,lm73", }, { }, }; MODULE_DEVICE_TABLE(of, lm73_of_match); static struct i2c_driver lm73_driver = { .class = I2C_CLASS_HWMON, .driver = { .name = "lm73", .of_match_table = lm73_of_match, }, .probe_new = lm73_probe, .id_table = lm73_ids, .detect = lm73_detect, .address_list = normal_i2c, }; module_i2c_driver(lm73_driver); MODULE_AUTHOR("Guillaume Ligneul <guillaume.ligneul@gmail.com>"); MODULE_DESCRIPTION("LM73 driver"); MODULE_LICENSE("GPL"); |