Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 | # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) # Copyright (c) 2020 MediaTek Inc. %YAML 1.2 --- $id: http://devicetree.org/schemas/memory-controllers/mediatek,smi-common.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: SMI (Smart Multimedia Interface) Common maintainers: - Yong Wu <yong.wu@mediatek.com> description: | The hardware block diagram please check bindings/iommu/mediatek,iommu.yaml MediaTek SMI have two generations of HW architecture, here is the list which generation the SoCs use: generation 1: mt2701 and mt7623. generation 2: mt2712, mt6779, mt8167, mt8173, mt8183, mt8186, mt8188, mt8192 and mt8195. There's slight differences between the two SMI, for generation 2, the register which control the iommu port is at each larb's register base. But for generation 1, the register is at smi ao base(smi always on register base). Besides that, the smi async clock should be prepared and enabled for SMI generation 1 to transform the smi clock into emi clock domain, but that is not needed for SMI generation 2. properties: compatible: oneOf: - enum: - mediatek,mt2701-smi-common - mediatek,mt2712-smi-common - mediatek,mt6779-smi-common - mediatek,mt6795-smi-common - mediatek,mt8167-smi-common - mediatek,mt8173-smi-common - mediatek,mt8183-smi-common - mediatek,mt8186-smi-common - mediatek,mt8188-smi-common-vdo - mediatek,mt8188-smi-common-vpp - mediatek,mt8192-smi-common - mediatek,mt8195-smi-common-vdo - mediatek,mt8195-smi-common-vpp - mediatek,mt8195-smi-sub-common - description: for mt7623 items: - const: mediatek,mt7623-smi-common - const: mediatek,mt2701-smi-common reg: maxItems: 1 power-domains: maxItems: 1 clocks: description: | apb and smi are mandatory. the async is only for generation 1 smi HW. gals(global async local sync) also is optional, see below. minItems: 2 items: - description: apb is Advanced Peripheral Bus clock, It's the clock for setting the register. - description: smi is the clock for transfer data and command. - description: Either asynchronous clock to help transform the smi clock into the emi clock domain on Gen1 h/w, or the path0 clock of gals. - description: gals1 is the path1 clock of gals. clock-names: minItems: 2 maxItems: 4 mediatek,smi: $ref: /schemas/types.yaml#/definitions/phandle description: a phandle to the smi-common node above. Only for sub-common. required: - compatible - reg - power-domains - clocks - clock-names allOf: - if: # only for gen1 HW properties: compatible: contains: enum: - mediatek,mt2701-smi-common then: properties: clocks: minItems: 3 maxItems: 3 clock-names: items: - const: apb - const: smi - const: async - if: # only for sub common properties: compatible: contains: enum: - mediatek,mt8195-smi-sub-common then: required: - mediatek,smi properties: clocks: minItems: 3 maxItems: 3 clock-names: items: - const: apb - const: smi - const: gals0 else: properties: mediatek,smi: false - if: # for gen2 HW that have gals properties: compatible: enum: - mediatek,mt6779-smi-common - mediatek,mt8183-smi-common - mediatek,mt8186-smi-common - mediatek,mt8192-smi-common - mediatek,mt8195-smi-common-vdo - mediatek,mt8195-smi-common-vpp then: properties: clocks: minItems: 4 maxItems: 4 clock-names: items: - const: apb - const: smi - const: gals0 - const: gals1 - if: # for gen2 HW that don't have gals properties: compatible: enum: - mediatek,mt2712-smi-common - mediatek,mt6795-smi-common - mediatek,mt8167-smi-common - mediatek,mt8173-smi-common then: properties: clocks: minItems: 2 maxItems: 2 clock-names: items: - const: apb - const: smi additionalProperties: false examples: - |+ #include <dt-bindings/clock/mt8173-clk.h> #include <dt-bindings/power/mt8173-power.h> smi_common: smi@14022000 { compatible = "mediatek,mt8173-smi-common"; reg = <0x14022000 0x1000>; power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; clocks = <&mmsys CLK_MM_SMI_COMMON>, <&mmsys CLK_MM_SMI_COMMON>; clock-names = "apb", "smi"; }; |