Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 | // SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2019 BayLibre SAS. All rights reserved. * Copyright (c) 2020 Christian Hewitt <christianshewitt@gmail.com> */ /dts-v1/; #include "meson-sm1-ac2xx.dtsi" #include <dt-bindings/sound/meson-g12a-tohdmitx.h> / { compatible = "amediatech,x96-air-gbit", "amlogic,sm1"; model = "Shenzhen Amediatech Technology Co., Ltd X96 Air"; sound { compatible = "amlogic,axg-sound-card"; model = "X96-AIR"; audio-aux-devs = <&tdmout_b>; audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1", "TDMOUT_B IN 1", "FRDDR_B OUT 1", "TDMOUT_B IN 2", "FRDDR_C OUT 1", "TDM_B Playback", "TDMOUT_B OUT"; assigned-clocks = <&clkc CLKID_MPLL2>, <&clkc CLKID_MPLL0>, <&clkc CLKID_MPLL1>; assigned-clock-parents = <0>, <0>, <0>; assigned-clock-rates = <294912000>, <270950400>, <393216000>; status = "okay"; dai-link-0 { sound-dai = <&frddr_a>; }; dai-link-1 { sound-dai = <&frddr_b>; }; dai-link-2 { sound-dai = <&frddr_c>; }; /* 8ch hdmi interface */ dai-link-3 { sound-dai = <&tdmif_b>; dai-format = "i2s"; dai-tdm-slot-tx-mask-0 = <1 1>; dai-tdm-slot-tx-mask-1 = <1 1>; dai-tdm-slot-tx-mask-2 = <1 1>; dai-tdm-slot-tx-mask-3 = <1 1>; mclk-fs = <256>; codec { sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>; }; }; /* hdmi glue */ dai-link-4 { sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>; codec { sound-dai = <&hdmi_tx>; }; }; }; }; &arb { status = "okay"; }; &clkc_audio { status = "okay"; }; ðmac { status = "okay"; pinctrl-0 = <ð_pins>, <ð_rgmii_pins>; pinctrl-names = "default"; phy-mode = "rgmii-txid"; phy-handle = <&external_phy>; rx-internal-delay-ps = <800>; }; &ext_mdio { external_phy: ethernet-phy@0 { /* Realtek RTL8211F (0x001cc916) */ reg = <0>; max-speed = <1000>; reset-assert-us = <10000>; reset-deassert-us = <80000>; reset-gpios = <&gpio GPIOZ_15 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>; interrupt-parent = <&gpio_intc>; /* MAC_INTR on GPIOZ_14 */ interrupts = <26 IRQ_TYPE_LEVEL_LOW>; }; }; &frddr_a { status = "okay"; }; &frddr_b { status = "okay"; }; &frddr_c { status = "okay"; }; &ir { linux,rc-map-name = "rc-x96max"; }; &tdmif_b { status = "okay"; }; &tdmout_b { status = "okay"; }; &tohdmitx { status = "okay"; }; |