.. _stable_kernel_rules:

Everything you ever wanted to know about Linux -stable releases
===============================================================

Rules on what kind of patches are accepted, and which ones are not, into the
"-stable" tree:

 - It must be obviously correct and tested.
 - It cannot be bigger than 100 lines, with context.
 - It must fix only one thing.
 - It must fix a real bug that bothers people (not a, "This could be a
   problem..." type thing).
 - It must fix a problem that causes a build error (but not for things
   marked CONFIG_BROKEN), an oops, a hang, data corruption, a real
   security issue, or some "oh, that's not good" issue.  In short, something
   critical.
 - Serious issues as reported by a user of a distribution kernel may also
   be considered if they fix a notable performance or interactivity issue.
   As these fixes are not as obvious and have a higher risk of a subtle
   regression they should only be submitted by a distribution kernel
   maintainer and include an addendum linking to a bugzilla entry if it
   exists and additional information on the user-visible impact.
 - New device IDs and quirks are also accepted.
 - No "theoretical race condition" issues, unless an explanation of how the
   race can be exploited is also provided.
 - It cannot contain any "trivial" fixes in it (spelling changes,
   whitespace cleanups, etc).
 - It must follow the
   :ref:`Documentation/process/submitting-patches.rst <submittingpatches>`
   rules.
 - It or an equivalent fix must already exist in Linus' tree (upstream).


Procedure for submitting patches to the -stable tree
----------------------------------------------------

.. note::

   Security patches should not be handled (solely) by the -stable review
   process but should follow the procedures in
   :ref:`Documentation/admin-guide/security-bugs.rst <securitybugs>`.

For all other submissions, choose one of the following procedures
-----------------------------------------------------------------

.. _option_1:

Option 1
********

To have the patch automatically included in the stable tree, add the tag

.. code-block:: none

     Cc: stable@vger.kernel.org

in the sign-off area. Once the patch is merged it will be applied to
the stable tree without anything else needing to be done by the author
or subsystem maintainer.

.. _option_2:

Option 2
********

After the patch has been merged to Linus' tree, send an email to
stable@vger.kernel.org containing the subject of the patch, the commit ID,
why you think it should be applied, and what kernel version you wish it to
be applied to.

.. _option_3:

Option 3
********

Send the patch, after verifying that it follows the above rules, to
stable@vger.kernel.org.  You must note the upstream commit ID in the
changelog of your submission, as well as the kernel version you wish
it to be applied to.

:ref:`option_1` is **strongly** preferred, is the easiest and most common.
:ref:`option_2` and :ref:`option_3` are more useful if the patch isn't deemed
worthy at the time it is applied to a public git tree (for instance, because
it deserves more regression testing first).  :ref:`option_3` is especially
useful if the original upstream patch needs to be backported (for example
the backport needs some special handling due to e.g. API changes).

Note that for :ref:`option_3`, if the patch deviates from the original
upstream patch (for example because it had to be backported) this must be very
clearly documented and justified in the patch description.

The upstream commit ID must be specified with a separate line above the commit
text, like this:

.. code-block:: none

    commit <sha1> upstream.

or alternatively:

.. code-block:: none

    [ Upstream commit <sha1> ]

Additionally, some patches submitted via :ref:`option_1` may have additional
patch prerequisites which can be cherry-picked. This can be specified in the
following format in the sign-off area:

.. code-block:: none

     Cc: <stable@vger.kernel.org> # 3.3.x: a1f84a3: sched: Check for idle
     Cc: <stable@vger.kernel.org> # 3.3.x: 1b9508f: sched: Rate-limit newidle
     Cc: <stable@vger.kernel.org> # 3.3.x: fd21073: sched: Fix affinity logic
     Cc: <stable@vger.kernel.org> # 3.3.x
     Signed-off-by: Ingo Molnar <mingo@elte.hu>

The tag sequence has the meaning of:

.. code-block:: none

     git cherry-pick a1f84a3
     git cherry-pick 1b9508f
     git cherry-pick fd21073
     git cherry-pick <this commit>

Also, some patches may have kernel version prerequisites.  This can be
specified in the following format in the sign-off area:

.. code-block:: none

     Cc: <stable@vger.kernel.org> # 3.3.x

The tag has the meaning of:

.. code-block:: none

     git cherry-pick <this commit>

For each "-stable" tree starting with the specified version.

Following the submission:

 - The sender will receive an ACK when the patch has been accepted into the
   queue, or a NAK if the patch is rejected.  This response might take a few
   days, according to the developer's schedules.
 - If accepted, the patch will be added to the -stable queue, for review by
   other developers and by the relevant subsystem maintainer.


Review cycle
------------

 - When the -stable maintainers decide for a review cycle, the patches will be
   sent to the review committee, and the maintainer of the affected area of
   the patch (unless the submitter is the maintainer of the area) and CC: to
   the linux-kernel mailing list.
 - The review committee has 48 hours in which to ACK or NAK the patch.
 - If the patch is rejected by a member of the committee, or linux-kernel
   members object to the patch, bringing up issues that the maintainers and
   members did not realize, the patch will be dropped from the queue.
 - The ACKed patches will be posted again as part of release candidate (-rc)
   to be tested by developers and testers.
 - Usually only one -rc release is made, however if there are any outstanding
   issues, some patches may be modified or dropped or additional patches may
   be queued. Additional -rc releases are then released and tested until no
   issues are found.
 - Responding to the -rc releases can be done on the mailing list by sending
   a "Tested-by:" email with any testing information desired. The "Tested-by:"
   tags will be collected and added to the release commit.
 - At the end of the review cycle, the new -stable release will be released
   containing all the queued and tested patches.
 - Security patches will be accepted into the -stable tree directly from the
   security kernel team, and not go through the normal review cycle.
   Contact the kernel security team for more details on this procedure.

Trees
-----

 - The queues of patches, for both completed versions and in progress
   versions can be found at:

	https://git.kernel.org/pub/scm/linux/kernel/git/stable/stable-queue.git

 - The finalized and tagged releases of all stable kernels can be found
   in separate branches per version at:

	https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git

 - The release candidate of all stable kernel versions can be found at:

        https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git/

   .. warning::
      The -stable-rc tree is a snapshot in time of the stable-queue tree and
      will change frequently, hence will be rebased often. It should only be
      used for testing purposes (e.g. to be consumed by CI systems).


Review committee
----------------

 - This is made up of a number of kernel developers who have volunteered for
   this task, and a few that haven't.