Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 | # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) # Copyright (C) 2021 Renesas Electronics Corp. %YAML 1.2 --- $id: http://devicetree.org/schemas/media/i2c/maxim,max96712.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Quad GMSL2 to CSI-2 Deserializer with GMSL1 Compatibility maintainers: - Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> description: | The MAX96712 deserializer converts GMSL2 or GMSL1 serial inputs into MIPI CSI-2 D-PHY or C-PHY formatted outputs. The device allows each link to simultaneously transmit bidirectional control-channel data while forward video transmissions are in progress. The MAX96712 can accommodate as many as four remotely located sensors using industry-standard coax or STP interconnects. Each GMSL2 serial link operates at a fixed rate of 3Gbps or 6Gbps in the forward direction and 187.5Mbps in the reverse direction. In GMSL1 mode, the MAX96712 can be paired with first-generation 3.12Gbps or 1.5Gbps GMSL1 serializers or operate up to 3.12Gbps with GMSL2 serializers in GMSL1 mode. properties: compatible: const: maxim,max96712 reg: description: I2C device address maxItems: 1 enable-gpios: true ports: $ref: /schemas/graph.yaml#/properties/ports properties: port@0: $ref: /schemas/graph.yaml#/properties/port description: GMSL Input 0 port@1: $ref: /schemas/graph.yaml#/properties/port description: GMSL Input 1 port@2: $ref: /schemas/graph.yaml#/properties/port description: GMSL Input 2 port@3: $ref: /schemas/graph.yaml#/properties/port description: GMSL Input 3 port@4: $ref: /schemas/graph.yaml#/$defs/port-base unevaluatedProperties: false description: CSI-2 Output properties: endpoint: $ref: /schemas/media/video-interfaces.yaml# unevaluatedProperties: false properties: data-lanes: true required: - data-lanes required: - port@4 required: - compatible - reg - ports additionalProperties: false examples: - | #include <dt-bindings/gpio/gpio.h> i2c@e6508000 { #address-cells = <1>; #size-cells = <0>; reg = <0 0xe6508000>; gmsl0: gmsl-deserializer@49 { compatible = "maxim,max96712"; reg = <0x49>; enable-gpios = <&pca9654_a 0 GPIO_ACTIVE_HIGH>; ports { #address-cells = <1>; #size-cells = <0>; port@4 { reg = <4>; max96712_out0: endpoint { clock-lanes = <0>; data-lanes = <1 2 3 4>; remote-endpoint = <&csi40_in>; }; }; }; }; }; |