/*
* Copyright 2019-2021 Advanced Micro Devices, Inc.
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"),
* to deal in the Software without restriction, including without limitation
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
* and/or sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
* OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
* ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*
* Authors: AMD
*
*/
#include "resource.h"
#include "clk_mgr.h"
#include "dcn31/dcn31_resource.h"
#include "dcn315/dcn315_resource.h"
#include "dcn316/dcn316_resource.h"
#include "dml/dcn20/dcn20_fpu.h"
#include "dcn31_fpu.h"
/**
* DOC: DCN31x FPU manipulation Overview
*
* The DCN architecture relies on FPU operations, which require special
* compilation flags and the use of kernel_fpu_begin/end functions; ideally, we
* want to avoid spreading FPU access across multiple files. With this idea in
* mind, this file aims to centralize all DCN3.1.x functions that require FPU
* access in a single place. Code in this file follows the following code
* pattern:
*
* 1. Functions that use FPU operations should be isolated in static functions.
* 2. The FPU functions should have the noinline attribute to ensure anything
* that deals with FP register is contained within this call.
* 3. All function that needs to be accessed outside this file requires a
* public interface that not uses any FPU reference.
* 4. Developers **must not** use DC_FP_START/END in this file, but they need
* to ensure that the caller invokes it before access any function available
* in this file. For this reason, public functions in this file must invoke
* dc_assert_fp_enabled();
*/
struct _vcs_dpi_ip_params_st dcn3_1_ip = {
.gpuvm_enable = 1,
.gpuvm_max_page_table_levels = 1,
.hostvm_enable = 1,
.hostvm_max_page_table_levels = 2,
.rob_buffer_size_kbytes = 64,
.det_buffer_size_kbytes = DCN3_1_DEFAULT_DET_SIZE,
.config_return_buffer_size_in_kbytes = 1792,
.compressed_buffer_segment_size_in_kbytes = 64,
.meta_fifo_size_in_kentries = 32,
.zero_size_buffer_entries = 512,
.compbuf_reserved_space_64b = 256,
.compbuf_reserved_space_zs = 64,
.dpp_output_buffer_pixels = 2560,
.opp_output_buffer_lines = 1,
.pixel_chunk_size_kbytes = 8,
.meta_chunk_size_kbytes = 2,
.min_meta_chunk_size_bytes = 256,
.writeback_chunk_size_kbytes = 8,
.ptoi_supported = false,
.num_dsc = 3,
.maximum_dsc_bits_per_component = 10,
.dsc422_native_support = false,
.is_line_buffer_bpp_fixed = true,
.line_buffer_fixed_bpp = 48,
.line_buffer_size_bits = 789504,
.max_line_buffer_lines = 12,
.writeback_interface_buffer_size_kbytes = 90,
.max_num_dpp = 4,
.max_num_otg = 4,
.max_num_hdmi_frl_outputs = 1,
.max_num_wb = 1,
.max_dchub_pscl_bw_pix_per_clk = 4,
.max_pscl_lb_bw_pix_per_clk = 2,
.max_lb_vscl_bw_pix_per_clk = 4,
.max_vscl_hscl_bw_pix_per_clk = 4,
.max_hscl_ratio = 6,
.max_vscl_ratio = 6,
.max_hscl_taps = 8,
.max_vscl_taps = 8,
.dpte_buffer_size_in_pte_reqs_luma = 64,
.dpte_buffer_size_in_pte_reqs_chroma = 34,
.dispclk_ramp_margin_percent = 1,
.max_inter_dcn_tile_repeaters = 8,
.cursor_buffer_size = 16,
.cursor_chunk_size = 2,
.writeback_line_buffer_buffer_size = 0,
.writeback_min_hscl_ratio = 1,
.writeback_min_vscl_ratio = 1,
.writeback_max_hscl_ratio = 1,
.writeback_max_vscl_ratio = 1,
.writeback_max_hscl_taps = 1,
.writeback_max_vscl_taps = 1,
.dppclk_delay_subtotal = 46,
.dppclk_delay_scl = 50,
.dppclk_delay_scl_lb_only = 16,
.dppclk_delay_cnvc_formatter = 27,
.dppclk_delay_cnvc_cursor = 6,
.dispclk_delay_subtotal = 119,
.dynamic_metadata_vm_enabled = false,
.odm_combine_4to1_supported = false,
.dcc_supported = true,
};
static struct _vcs_dpi_soc_bounding_box_st dcn3_1_soc = {
/*TODO: correct dispclk/dppclk voltage level determination*/
.clock_limits = {
{
.state = 0,
.dispclk_mhz = 1200.0,
.dppclk_mhz = 1200.0,
.phyclk_mhz = 600.0,
.phyclk_d18_mhz = 667.0,
.dscclk_mhz = 186.0,
.dtbclk_mhz = 625.0,
},
{
.state = 1,
.dispclk_mhz = 1200.0,
.dppclk_mhz = 1200.0,
.phyclk_mhz = 810.0,
.phyclk_d18_mhz = 667.0,
.dscclk_mhz = 209.0,
.dtbclk_mhz = 625.0,
},
{
.state = 2,
.dispclk_mhz = 1200.0,
.dppclk_mhz = 1200.0,
.phyclk_mhz = 810.0,
.phyclk_d18_mhz = 667.0,
.dscclk_mhz = 209.0,
.dtbclk_mhz = 625.0,
},
{
.state = 3,
.dispclk_mhz = 1200.0,
.dppclk_mhz = 1200.0,
.phyclk_mhz = 810.0,
.phyclk_d18_mhz = 667.0,
.dscclk_mhz = 371.0,
.dtbclk_mhz = 625.0,
},
{
.state = 4,
.dispclk_mhz = 1200.0,
.dppclk_mhz = 1200.0,
.phyclk_mhz = 810.0,
.phyclk_d18_mhz = 667.0,
.dscclk_mhz = 417.0,
.dtbclk_mhz = 625.0,
},
},
.num_states = 5,
.sr_exit_time_us = 9.0,
.sr_enter_plus_exit_time_us = 11.0,
.sr_exit_z8_time_us = 442.0,
.sr_enter_plus_exit_z8_time_us = 560.0,
.writeback_latency_us = 12.0,
.dram_channel_width_bytes = 4,
.round_trip_ping_latency_dcfclk_cycles = 106,
.urgent_latency_pixel_data_only_us = 4.0,
.urgent_latency_pixel_mixed_with_vm_data_us = 4.0,
.urgent_latency_vm_data_only_us = 4.0,
.urgent_out_of_order_return_per_channel_pixel_only_bytes = 4096,
.urgent_out_of_order_return_per_channel_pixel_and_vm_bytes = 4096,
.urgent_out_of_order_return_per_channel_vm_only_bytes = 4096,
.pct_ideal_sdp_bw_after_urgent = 80.0,
.pct_ideal_dram_sdp_bw_after_urgent_pixel_only = 65.0,
.pct_ideal_dram_sdp_bw_after_urgent_pixel_and_vm = 60.0,
.pct_ideal_dram_sdp_bw_after_urgent_vm_only = 30.0,
.max_avg_sdp_bw_use_normal_percent = 60.0,
.max_avg_dram_bw_use_normal_percent = 60.0,
.fabric_datapath_to_dcn_data_return_bytes = 32,
.return_bus_width_bytes = 64,
.downspread_percent = 0.38,
.dcn_downspread_percent = 0.5,
.gpuvm_min_page_size_bytes = 4096,
.hostvm_min_page_size_bytes = 4096,
.do_urgent_latency_adjustment = false,
.urgent_latency_adjustment_fabric_clock_component_us = 0,
.urgent_latency_adjustment_fabric_clock_reference_mhz = 0,
};
struct _vcs_dpi_ip_params_st dcn3_15_ip = {
.gpuvm_enable = 1,
.gpuvm_max_page_table_levels = 1,
.hostvm_enable = 1,
.hostvm_max_page_table_levels = 2,
.rob_buffer_size_kbytes = 64,
.det_buffer_size_kbytes = DCN3_15_DEFAULT_DET_SIZE,
.min_comp_buffer_size_kbytes = 64,
.config_return_buffer_size_in_kbytes = 1024,
.compressed_buffer_segment_size_in_kbytes = 64,
.meta_fifo_size_in_kentries = 32,
.zero_size_buffer_entries = 512,
.compbuf_reserved_space_64b = 256,
.compbuf_reserved_space_zs = 64,
.dpp_output_buffer_pixels = 2560,
.opp_output_buffer_lines = 1,
.pixel_chunk_size_kbytes = 8,
.meta_chunk_size_kbytes = 2,
.min_meta_chunk_size_bytes = 256,
.writeback_chunk_size_kbytes = 8,
.ptoi_supported = false,
.num_dsc = 3,
.maximum_dsc_bits_per_component = 10,
.dsc422_native_support = false,
.is_line_buffer_bpp_fixed = true,
.line_buffer_fixed_bpp = 48,
.line_buffer_size_bits = 789504,
.max_line_buffer_lines = 12,
.writeback_interface_buffer_size_kbytes = 90,
.max_num_dpp = 4,
.max_num_otg = 4,
.max_num_hdmi_frl_outputs = 1,
.max_num_wb = 1,
.max_dchub_pscl_bw_pix_per_clk = 4,
.max_pscl_lb_bw_pix_per_clk = 2,
.max_lb_vscl_bw_pix_per_clk = 4,
.max_vscl_hscl_bw_pix_per_clk = 4,
.max_hscl_ratio = 6,
.max_vscl_ratio = 6,
.max_hscl_taps = 8,
.max_vscl_taps = 8,
.dpte_buffer_size_in_pte_reqs_luma = 64,
.dpte_buffer_size_in_pte_reqs_chroma = 34,
.dispclk_ramp_margin_percent = 1,
.max_inter_dcn_tile_repeaters = 9,
.cursor_buffer_size = 16,
.cursor_chunk_size = 2,
.writeback_line_buffer_buffer_size = 0,
.writeback_min_hscl_ratio = 1,
.writeback_min_vscl_ratio = 1,
.writeback_max_hscl_ratio = 1,
.writeback_max_vscl_ratio = 1,
.writeback_max_hscl_taps = 1,
.writeback_max_vscl_taps = 1,
.dppclk_delay_subtotal = 46,
.dppclk_delay_scl = 50,
.dppclk_delay_scl_lb_only = 16,
.dppclk_delay_cnvc_formatter = 27,
.dppclk_delay_cnvc_cursor = 6,
.dispclk_delay_subtotal = 119,
.dynamic_metadata_vm_enabled = false,
.odm_combine_4to1_supported = false,
.dcc_supported = true,
};
static struct _vcs_dpi_soc_bounding_box_st dcn3_15_soc = {
.sr_exit_time_us = 9.0,
.sr_enter_plus_exit_time_us = 11.0,
.sr_exit_z8_time_us = 50.0,
.sr_enter_plus_exit_z8_time_us = 50.0,
.writeback_latency_us = 12.0,
.dram_channel_width_bytes = 4,
.round_trip_ping_latency_dcfclk_cycles = 106,
.urgent_latency_pixel_data_only_us = 4.0,
.urgent_latency_pixel_mixed_with_vm_data_us = 4.0,
.urgent_latency_vm_data_only_us = 4.0,
.urgent_out_of_order_return_per_channel_pixel_only_bytes = 4096,
.urgent_out_of_order_return_per_channel_pixel_and_vm_bytes = 4096,
.urgent_out_of_order_return_per_channel_vm_only_bytes = 4096,
.pct_ideal_sdp_bw_after_urgent = 80.0,
.pct_ideal_dram_sdp_bw_after_urgent_pixel_only = 65.0,
.pct_ideal_dram_sdp_bw_after_urgent_pixel_and_vm = 60.0,
.pct_ideal_dram_sdp_bw_after_urgent_vm_only = 30.0,
.max_avg_sdp_bw_use_normal_percent = 60.0,
.max_avg_dram_bw_use_normal_percent = 60.0,
.fabric_datapath_to_dcn_data_return_bytes = 32,
.return_bus_width_bytes = 64,
.downspread_percent = 0.38,
.dcn_downspread_percent = 0.38,
.gpuvm_min_page_size_bytes = 4096,
.hostvm_min_page_size_bytes = 4096,
.do_urgent_latency_adjustment = false,
.urgent_latency_adjustment_fabric_clock_component_us = 0,
.urgent_latency_adjustment_fabric_clock_reference_mhz = 0,
.num_chans = 4,
.dummy_pstate_latency_us = 10.0
};
struct _vcs_dpi_ip_params_st dcn3_16_ip = {
.gpuvm_enable = 1,
.gpuvm_max_page_table_levels = 1,
.hostvm_enable = 1,
.hostvm_max_page_table_levels = 2,
.rob_buffer_size_kbytes = 64,
.det_buffer_size_kbytes = DCN3_16_DEFAULT_DET_SIZE,
.min_comp_buffer_size_kbytes = 64,
.config_return_buffer_size_in_kbytes = 1024,
.compressed_buffer_segment_size_in_kbytes = 64,
.meta_fifo_size_in_kentries = 32,
.zero_size_buffer_entries = 512,
.compbuf_reserved_space_64b = 256,
.compbuf_reserved_space_zs = 64,
.dpp_output_buffer_pixels = 2560,
.opp_output_buffer_lines = 1,
.pixel_chunk_size_kbytes = 8,
.meta_chunk_size_kbytes = 2,
.min_meta_chunk_size_bytes = 256,
.writeback_chunk_size_kbytes = 8,
.ptoi_supported = false,
.num_dsc = 3,
.maximum_dsc_bits_per_component = 10,
.dsc422_native_support = false,
.is_line_buffer_bpp_fixed = true,
.line_buffer_fixed_bpp = 48,
.line_buffer_size_bits = 789504,
.max_line_buffer_lines = 12,
.writeback_interface_buffer_size_kbytes = 90,
.max_num_dpp = 4,
.max_num_otg = 4,
.max_num_hdmi_frl_outputs = 1,
.max_num_wb = 1,
.max_dchub_pscl_bw_pix_per_clk = 4,
.max_pscl_lb_bw_pix_per_clk = 2,
.max_lb_vscl_bw_pix_per_clk = 4,
.max_vscl_hscl_bw_pix_per_clk = 4,
.max_hscl_ratio = 6,
.max_vscl_ratio = 6,
.max_hscl_taps = 8,
.max_vscl_taps = 8,
.dpte_buffer_size_in_pte_reqs_luma = 64,
.dpte_buffer_size_in_pte_reqs_chroma = 34,
.dispclk_ramp_margin_percent = 1,
.max_inter_dcn_tile_repeaters = 8,
.cursor_buffer_size = 16,
.cursor_chunk_size = 2,
.writeback_line_buffer_buffer_size = 0,
.writeback_min_hscl_ratio = 1,
.writeback_min_vscl_ratio = 1,
.writeback_max_hscl_ratio = 1,
.writeback_max_vscl_ratio = 1,
.writeback_max_hscl_taps = 1,
.writeback_max_vscl_taps = 1,
.dppclk_delay_subtotal = 46,
.dppclk_delay_scl = 50,
.dppclk_delay_scl_lb_only = 16,
.dppclk_delay_cnvc_formatter = 27,
.dppclk_delay_cnvc_cursor = 6,
.dispclk_delay_subtotal = 119,
.dynamic_metadata_vm_enabled = false,
.odm_combine_4to1_supported = false,
.dcc_supported = true,
};
static struct _vcs_dpi_soc_bounding_box_st dcn3_16_soc = {
/*TODO: correct dispclk/dppclk voltage level determination*/
.clock_limits = {
{
.state = 0,
.dispclk_mhz = 556.0,
.dppclk_mhz = 556.0,
.phyclk_mhz = 600.0,
.phyclk_d18_mhz = 445.0,
.dscclk_mhz = 186.0,
.dtbclk_mhz = 625.0,
},
{
.state = 1,
.dispclk_mhz = 625.0,
.dppclk_mhz = 625.0,
.phyclk_mhz = 810.0,
.phyclk_d18_mhz = 667.0,
.dscclk_mhz = 209.0,
.dtbclk_mhz = 625.0,
},
{
.state = 2,
.dispclk_mhz = 625.0,
.dppclk_mhz = 625.0,
.phyclk_mhz = 810.0,
.phyclk_d18_mhz = 667.0,
.dscclk_mhz = 209.0,
.dtbclk_mhz = 625.0,
},
{
.state = 3,
.dispclk_mhz = 1112.0,
.dppclk_mhz = 1112.0,
.phyclk_mhz = 810.0,
.phyclk_d18_mhz = 667.0,
.dscclk_mhz = 371.0,
.dtbclk_mhz = 625.0,
},
{
.state = 4,
.dispclk_mhz = 1250.0,
.dppclk_mhz = 1250.0,
.phyclk_mhz = 810.0,
.phyclk_d18_mhz = 667.0,
.dscclk_mhz = 417.0,
.dtbclk_mhz = 625.0,
},
},
.num_states = 5,
.sr_exit_time_us = 9.0,
.sr_enter_plus_exit_time_us = 11.0,
.sr_exit_z8_time_us = 442.0,
.sr_enter_plus_exit_z8_time_us = 560.0,
.writeback_latency_us = 12.0,
.dram_channel_width_bytes = 4,
.round_trip_ping_latency_dcfclk_cycles = 106,
.urgent_latency_pixel_data_only_us = 4.0,
.urgent_latency_pixel_mixed_with_vm_data_us = 4.0,
.urgent_latency_vm_data_only_us = 4.0,
.urgent_out_of_order_return_per_channel_pixel_only_bytes = 4096,
.urgent_out_of_order_return_per_channel_pixel_and_vm_bytes = 4096,
.urgent_out_of_order_return_per_channel_vm_only_bytes = 4096,
.pct_ideal_sdp_bw_after_urgent = 80.0,
.pct_ideal_dram_sdp_bw_after_urgent_pixel_only = 65.0,
.pct_ideal_dram_sdp_bw_after_urgent_pixel_and_vm = 60.0,
.pct_ideal_dram_sdp_bw_after_urgent_vm_only = 30.0,
.max_avg_sdp_bw_use_normal_percent = 60.0,
.max_avg_dram_bw_use_normal_percent = 60.0,
.fabric_datapath_to_dcn_data_return_bytes = 32,
.return_bus_width_bytes = 64,
.downspread_percent = 0.38,
.dcn_downspread_percent = 0.5,
.gpuvm_min_page_size_bytes = 4096,
.hostvm_min_page_size_bytes = 4096,
.do_urgent_latency_adjustment = false,
.urgent_latency_adjustment_fabric_clock_component_us = 0,
.urgent_latency_adjustment_fabric_clock_reference_mhz = 0,
};
void dcn31_zero_pipe_dcc_fraction(display_e2e_pipe_params_st *pipes,
int pipe_cnt)
{
dc_assert_fp_enabled();
pipes[pipe_cnt].pipe.src.dcc_fraction_of_zs_req_luma = 0;
pipes[pipe_cnt].pipe.src.dcc_fraction_of_zs_req_chroma = 0;
}
void dcn31_update_soc_for_wm_a(struct dc *dc, struct dc_state *context)
{
dc_assert_fp_enabled();
if (dc->clk_mgr->bw_params->wm_table.entries[WM_A].valid) {
context->bw_ctx.dml.soc.dram_clock_change_latency_us = dc->clk_mgr->bw_params->wm_table.entries[WM_A].pstate_latency_us;
context->bw_ctx.dml.soc.sr_enter_plus_exit_time_us = dc->clk_mgr->bw_params->wm_table.entries[WM_A].sr_enter_plus_exit_time_us;
context->bw_ctx.dml.soc.sr_exit_time_us = dc->clk_mgr->bw_params->wm_table.entries[WM_A].sr_exit_time_us;
}
}
void dcn315_update_soc_for_wm_a(struct dc *dc, struct dc_state *context)
{
dc_assert_fp_enabled();
if (dc->clk_mgr->bw_params->wm_table.entries[WM_A].valid) {
/* For 315 pstate change is only supported if possible in vactive */
if (context->bw_ctx.dml.vba.DRAMClockChangeSupport[context->bw_ctx.dml.vba.VoltageLevel][context->bw_ctx.dml.vba.maxMpcComb] != dm_dram_clock_change_vactive)
context->bw_ctx.dml.soc.dram_clock_change_latency_us = context->bw_ctx.dml.soc.dummy_pstate_latency_us;
else
context->bw_ctx.dml.soc.dram_clock_change_latency_us = dc->clk_mgr->bw_params->wm_table.entries[WM_A].pstate_latency_us;
context->bw_ctx.dml.soc.sr_enter_plus_exit_time_us =
dc->clk_mgr->bw_params->wm_table.entries[WM_A].sr_enter_plus_exit_time_us;
context->bw_ctx.dml.soc.sr_exit_time_us =
dc->clk_mgr->bw_params->wm_table.entries[WM_A].sr_exit_time_us;
}
}
void dcn31_calculate_wm_and_dlg_fp(
struct dc *dc, struct dc_state *context,
display_e2e_pipe_params_st *pipes,
int pipe_cnt,
int vlevel)
{
int i, pipe_idx, total_det = 0, active_hubp_count = 0;
double dcfclk = context->bw_ctx.dml.vba.DCFCLKState[vlevel][context->bw_ctx.dml.vba.maxMpcComb];
dc_assert_fp_enabled();
if (context->bw_ctx.dml.soc.min_dcfclk > dcfclk)
dcfclk = context->bw_ctx.dml.soc.min_dcfclk;
/* We don't recalculate clocks for 0 pipe configs, which can block
* S0i3 as high clocks will block low power states
* Override any clocks that can block S0i3 to min here
*/
if (pipe_cnt == 0) {
context->bw_ctx.bw.dcn.clk.dcfclk_khz = dcfclk; // always should be vlevel 0
return;
}
pipes[0].clks_cfg.voltage = vlevel;
pipes[0].clks_cfg.dcfclk_mhz = dcfclk;
pipes[0].clks_cfg.socclk_mhz = context->bw_ctx.dml.soc.clock_limits[vlevel].socclk_mhz;
/* Set A:
* All clocks min required
*
* Set A calculated last so that following calculations are based on Set A
*/
dc->res_pool->funcs->update_soc_for_wm_a(dc, context);
context->bw_ctx.bw.dcn.watermarks.a.urgent_ns = get_wm_urgent(&context->bw_ctx.dml, pipes, pipe_cnt) * 1000;
context->bw_ctx.bw.dcn.watermarks.a.cstate_pstate.cstate_enter_plus_exit_ns = get_wm_stutter_enter_exit(&context->bw_ctx.dml, pipes, pipe_cnt) * 1000;
context->bw_ctx.bw.dcn.watermarks.a.cstate_pstate.cstate_exit_ns = get_wm_stutter_exit(&context->bw_ctx.dml, pipes, pipe_cnt) * 1000;
context->bw_ctx.bw.dcn.watermarks.a.cstate_pstate.pstate_change_ns = get_wm_dram_clock_change(&context->bw_ctx.dml, pipes, pipe_cnt) * 1000;
context->bw_ctx.bw.dcn.watermarks.a.cstate_pstate.cstate_enter_plus_exit_z8_ns = get_wm_z8_stutter_enter_exit(&context->bw_ctx.dml, pipes, pipe_cnt) * 1000;
context->bw_ctx.bw.dcn.watermarks.a.cstate_pstate.cstate_exit_z8_ns = get_wm_z8_stutter_exit(&context->bw_ctx.dml, pipes, pipe_cnt) * 1000;
context->bw_ctx.bw.dcn.watermarks.a.pte_meta_urgent_ns = get_wm_memory_trip(&context->bw_ctx.dml, pipes, pipe_cnt) * 1000;
context->bw_ctx.bw.dcn.watermarks.a.frac_urg_bw_nom = get_fraction_of_urgent_bandwidth(&context->bw_ctx.dml, pipes, pipe_cnt) * 1000;
context->bw_ctx.bw.dcn.watermarks.a.frac_urg_bw_flip = get_fraction_of_urgent_bandwidth_imm_flip(&context->bw_ctx.dml, pipes, pipe_cnt) * 1000;
context->bw_ctx.bw.dcn.watermarks.a.urgent_latency_ns = get_urgent_latency(&context->bw_ctx.dml, pipes, pipe_cnt) * 1000;
context->bw_ctx.bw.dcn.watermarks.b = context->bw_ctx.bw.dcn.watermarks.a;
context->bw_ctx.bw.dcn.watermarks.c = context->bw_ctx.bw.dcn.watermarks.a;
context->bw_ctx.bw.dcn.watermarks.d = context->bw_ctx.bw.dcn.watermarks.a;
for (i = 0, pipe_idx = 0; i < dc->res_pool->pipe_count; i++) {
if (!context->res_ctx.pipe_ctx[i].stream)
continue;
if (context->res_ctx.pipe_ctx[i].plane_state)
active_hubp_count++;
pipes[pipe_idx].clks_cfg.dispclk_mhz = get_dispclk_calculated(&context->bw_ctx.dml, pipes, pipe_cnt);
pipes[pipe_idx].clks_cfg.dppclk_mhz = get_dppclk_calculated(&context->bw_ctx.dml, pipes, pipe_cnt, pipe_idx);
if (dc->config.forced_clocks || dc->debug.max_disp_clk) {
pipes[pipe_idx].clks_cfg.dispclk_mhz = context->bw_ctx.dml.soc.clock_limits[0].dispclk_mhz;
pipes[pipe_idx].clks_cfg.dppclk_mhz = context->bw_ctx.dml.soc.clock_limits[0].dppclk_mhz;
}
if (dc->debug.min_disp_clk_khz > pipes[pipe_idx].clks_cfg.dispclk_mhz * 1000)
pipes[pipe_idx].clks_cfg.dispclk_mhz = dc->debug.min_disp_clk_khz / 1000.0;
if (dc->debug.min_dpp_clk_khz > pipes[pipe_idx].clks_cfg.dppclk_mhz * 1000)
pipes[pipe_idx].clks_cfg.dppclk_mhz = dc->debug.min_dpp_clk_khz / 1000.0;
pipe_idx++;
}
dcn20_calculate_dlg_params(dc, context, pipes, pipe_cnt, vlevel);
/* For 31x apu pstate change is only supported if possible in vactive*/
context->bw_ctx.bw.dcn.clk.p_state_change_support =
context->bw_ctx.dml.vba.DRAMClockChangeSupport[vlevel][context->bw_ctx.dml.vba.maxMpcComb] == dm_dram_clock_change_vactive;
/* If DCN isn't making memory requests we can allow pstate change and lower clocks */
if (!active_hubp_count) {
context->bw_ctx.bw.dcn.clk.socclk_khz = 0;
context->bw_ctx.bw.dcn.clk.dppclk_khz = 0;
context->bw_ctx.bw.dcn.clk.dcfclk_khz = 0;
context->bw_ctx.bw.dcn.clk.dcfclk_deep_sleep_khz = 0;
context->bw_ctx.bw.dcn.clk.dramclk_khz = 0;
context->bw_ctx.bw.dcn.clk.fclk_khz = 0;
context->bw_ctx.bw.dcn.clk.p_state_change_support = true;
for (i = 0; i < dc->res_pool->pipe_count; i++)
if (context->res_ctx.pipe_ctx[i].stream)
context->res_ctx.pipe_ctx[i].plane_res.bw.dppclk_khz = 0;
}
for (i = 0, pipe_idx = 0; i < dc->res_pool->pipe_count; i++) {
if (!context->res_ctx.pipe_ctx[i].stream)
continue;
context->res_ctx.pipe_ctx[i].det_buffer_size_kb =
get_det_buffer_size_kbytes(&context->bw_ctx.dml, pipes, pipe_cnt, pipe_idx);
if (context->res_ctx.pipe_ctx[i].det_buffer_size_kb > 384)
context->res_ctx.pipe_ctx[i].det_buffer_size_kb /= 2;
total_det += context->res_ctx.pipe_ctx[i].det_buffer_size_kb;
pipe_idx++;
}
context->bw_ctx.bw.dcn.compbuf_size_kb = context->bw_ctx.dml.ip.config_return_buffer_size_in_kbytes - total_det;
}
void dcn31_update_bw_bounding_box(struct dc *dc, struct clk_bw_params *bw_params)
{
struct _vcs_dpi_voltage_scaling_st *s = dc->scratch.update_bw_bounding_box.clock_limits;
struct clk_limit_table *clk_table = &bw_params->clk_table;
unsigned int i, closest_clk_lvl;
int j;
dc_assert_fp_enabled();
memcpy(s, dcn3_1_soc.clock_limits, sizeof(dcn3_1_soc.clock_limits));
// Default clock levels are used for diags, which may lead to overclocking.
if (!IS_DIAG_DC(dc->ctx->dce_environment)) {
int max_dispclk_mhz = 0, max_dppclk_mhz = 0;
dcn3_1_ip.max_num_otg = dc->res_pool->res_cap->num_timing_generator;
dcn3_1_ip.max_num_dpp = dc->res_pool->pipe_count;
dcn3_1_soc.num_chans = bw_params->num_channels;
ASSERT(clk_table->num_entries);
/* Prepass to find max clocks independent of voltage level. */
for (i = 0; i < clk_table->num_entries; ++i) {
if (clk_table->entries[i].dispclk_mhz > max_dispclk_mhz)
max_dispclk_mhz = clk_table->entries[i].dispclk_mhz;
if (clk_table->entries[i].dppclk_mhz > max_dppclk_mhz)
max_dppclk_mhz = clk_table->entries[i].dppclk_mhz;
}
for (i = 0; i < clk_table->num_entries; i++) {
/* loop backwards*/
for (closest_clk_lvl = 0, j = dcn3_1_soc.num_states - 1; j >= 0; j--) {
if ((unsigned int) dcn3_1_soc.clock_limits[j].dcfclk_mhz <= clk_table->entries[i].dcfclk_mhz) {
closest_clk_lvl = j;
break;
}
}
s[i].state = i;
/* Clocks dependent on voltage level. */
s[i].dcfclk_mhz = clk_table->entries[i].dcfclk_mhz;
s[i].fabricclk_mhz = clk_table->entries[i].fclk_mhz;
s[i].socclk_mhz = clk_table->entries[i].socclk_mhz;
s[i].dram_speed_mts = clk_table->entries[i].memclk_mhz *
2 * clk_table->entries[i].wck_ratio;
/* Clocks independent of voltage level. */
s[i].dispclk_mhz = max_dispclk_mhz ? max_dispclk_mhz :
dcn3_1_soc.clock_limits[closest_clk_lvl].dispclk_mhz;
s[i].dppclk_mhz = max_dppclk_mhz ? max_dppclk_mhz :
dcn3_1_soc.clock_limits[closest_clk_lvl].dppclk_mhz;
s[i].dram_bw_per_chan_gbps =
dcn3_1_soc.clock_limits[closest_clk_lvl].dram_bw_per_chan_gbps;
s[i].dscclk_mhz = dcn3_1_soc.clock_limits[closest_clk_lvl].dscclk_mhz;
s[i].dtbclk_mhz = dcn3_1_soc.clock_limits[closest_clk_lvl].dtbclk_mhz;
s[i].phyclk_d18_mhz =
dcn3_1_soc.clock_limits[closest_clk_lvl].phyclk_d18_mhz;
s[i].phyclk_mhz = dcn3_1_soc.clock_limits[closest_clk_lvl].phyclk_mhz;
}
if (clk_table->num_entries) {
dcn3_1_soc.num_states = clk_table->num_entries;
}
}
memcpy(dcn3_1_soc.clock_limits, s, sizeof(dcn3_1_soc.clock_limits));
dcn3_1_soc.dispclk_dppclk_vco_speed_mhz = dc->clk_mgr->dentist_vco_freq_khz / 1000.0;
dc->dml.soc.dispclk_dppclk_vco_speed_mhz = dc->clk_mgr->dentist_vco_freq_khz / 1000.0;
if ((int)(dcn3_1_soc.dram_clock_change_latency_us * 1000)
!= dc->debug.dram_clock_change_latency_ns
&& dc->debug.dram_clock_change_latency_ns) {
dcn3_1_soc.dram_clock_change_latency_us = dc->debug.dram_clock_change_latency_ns / 1000;
}
if (!IS_FPGA_MAXIMUS_DC(dc->ctx->dce_environment))
dml_init_instance(&dc->dml, &dcn3_1_soc, &dcn3_1_ip, DML_PROJECT_DCN31);
else
dml_init_instance(&dc->dml, &dcn3_1_soc, &dcn3_1_ip, DML_PROJECT_DCN31_FPGA);
}
void dcn315_update_bw_bounding_box(struct dc *dc, struct clk_bw_params *bw_params)
{
struct clk_limit_table *clk_table = &bw_params->clk_table;
int i, max_dispclk_mhz = 0, max_dppclk_mhz = 0;
dc_assert_fp_enabled();
dcn3_15_ip.max_num_otg = dc->res_pool->res_cap->num_timing_generator;
dcn3_15_ip.max_num_dpp = dc->res_pool->pipe_count;
if (bw_params->num_channels > 0)
dcn3_15_soc.num_chans = bw_params->num_channels;
if (bw_params->dram_channel_width_bytes > 0)
dcn3_15_soc.dram_channel_width_bytes = bw_params->dram_channel_width_bytes;
ASSERT(clk_table->num_entries);
/* Setup soc to always use max dispclk/dppclk to avoid odm-to-lower-voltage */
for (i = 0; i < clk_table->num_entries; ++i) {
if (clk_table->entries[i].dispclk_mhz > max_dispclk_mhz)
max_dispclk_mhz = clk_table->entries[i].dispclk_mhz;
if (clk_table->entries[i].dppclk_mhz > max_dppclk_mhz)
max_dppclk_mhz = clk_table->entries[i].dppclk_mhz;
}
for (i = 0; i < clk_table->num_entries; i++) {
dcn3_15_soc.clock_limits[i].state = i;
/* Clocks dependent on voltage level. */
dcn3_15_soc.clock_limits[i].dcfclk_mhz = clk_table->entries[i].dcfclk_mhz;
dcn3_15_soc.clock_limits[i].fabricclk_mhz = clk_table->entries[i].fclk_mhz;
dcn3_15_soc.clock_limits[i].socclk_mhz = clk_table->entries[i].socclk_mhz;
dcn3_15_soc.clock_limits[i].dram_speed_mts = clk_table->entries[i].memclk_mhz * 2 * clk_table->entries[i].wck_ratio;
/* These aren't actually read from smu, but rather set in clk_mgr defaults */
dcn3_15_soc.clock_limits[i].dtbclk_mhz = clk_table->entries[i].dtbclk_mhz;
dcn3_15_soc.clock_limits[i].phyclk_d18_mhz = clk_table->entries[i].phyclk_d18_mhz;
dcn3_15_soc.clock_limits[i].phyclk_mhz = clk_table->entries[i].phyclk_mhz;
/* Clocks independent of voltage level. */
dcn3_15_soc.clock_limits[i].dispclk_mhz = max_dispclk_mhz;
dcn3_15_soc.clock_limits[i].dppclk_mhz = max_dppclk_mhz;
dcn3_15_soc.clock_limits[i].dscclk_mhz = max_dispclk_mhz / 3.0;
}
dcn3_15_soc.num_states = clk_table->num_entries;
/* Set vco to max_dispclk * 2 to make sure the highest dispclk is always available for dml calcs,
* no impact outside of dml validation
*/
dcn3_15_soc.dispclk_dppclk_vco_speed_mhz = max_dispclk_mhz * 2;
if ((int)(dcn3_15_soc.dram_clock_change_latency_us * 1000)
!= dc->debug.dram_clock_change_latency_ns
&& dc->debug.dram_clock_change_latency_ns) {
dcn3_15_soc.dram_clock_change_latency_us = dc->debug.dram_clock_change_latency_ns / 1000;
}
if (!IS_FPGA_MAXIMUS_DC(dc->ctx->dce_environment))
dml_init_instance(&dc->dml, &dcn3_15_soc, &dcn3_15_ip, DML_PROJECT_DCN315);
else
dml_init_instance(&dc->dml, &dcn3_15_soc, &dcn3_15_ip, DML_PROJECT_DCN31_FPGA);
}
void dcn316_update_bw_bounding_box(struct dc *dc, struct clk_bw_params *bw_params)
{
struct _vcs_dpi_voltage_scaling_st *s = dc->scratch.update_bw_bounding_box.clock_limits;
struct clk_limit_table *clk_table = &bw_params->clk_table;
unsigned int i, closest_clk_lvl;
int max_dispclk_mhz = 0, max_dppclk_mhz = 0;
int j;
dc_assert_fp_enabled();
memcpy(s, dcn3_16_soc.clock_limits, sizeof(dcn3_16_soc.clock_limits));
// Default clock levels are used for diags, which may lead to overclocking.
if (!IS_DIAG_DC(dc->ctx->dce_environment)) {
dcn3_16_ip.max_num_otg = dc->res_pool->res_cap->num_timing_generator;
dcn3_16_ip.max_num_dpp = dc->res_pool->pipe_count;
dcn3_16_soc.num_chans = bw_params->num_channels;
ASSERT(clk_table->num_entries);
/* Prepass to find max clocks independent of voltage level. */
for (i = 0; i < clk_table->num_entries; ++i) {
if (clk_table->entries[i].dispclk_mhz > max_dispclk_mhz)
max_dispclk_mhz = clk_table->entries[i].dispclk_mhz;
if (clk_table->entries[i].dppclk_mhz > max_dppclk_mhz)
max_dppclk_mhz = clk_table->entries[i].dppclk_mhz;
}
for (i = 0; i < clk_table->num_entries; i++) {
/* loop backwards*/
for (closest_clk_lvl = 0, j = dcn3_16_soc.num_states - 1; j >= 0; j--) {
if ((unsigned int) dcn3_16_soc.clock_limits[j].dcfclk_mhz <=
clk_table->entries[i].dcfclk_mhz) {
closest_clk_lvl = j;
break;
}
}
// Ported from DCN315
if (clk_table->num_entries == 1) {
/*smu gives one DPM level, let's take the highest one*/
closest_clk_lvl = dcn3_16_soc.num_states - 1;
}
s[i].state = i;
/* Clocks dependent on voltage level. */
s[i].dcfclk_mhz = clk_table->entries[i].dcfclk_mhz;
if (clk_table->num_entries == 1 &&
s[i].dcfclk_mhz <
dcn3_16_soc.clock_limits[closest_clk_lvl].dcfclk_mhz) {
/*SMU fix not released yet*/
s[i].dcfclk_mhz =
dcn3_16_soc.clock_limits[closest_clk_lvl].dcfclk_mhz;
}
s[i].fabricclk_mhz = clk_table->entries[i].fclk_mhz;
s[i].socclk_mhz = clk_table->entries[i].socclk_mhz;
s[i].dram_speed_mts = clk_table->entries[i].memclk_mhz *
2 * clk_table->entries[i].wck_ratio;
/* Clocks independent of voltage level. */
s[i].dispclk_mhz = max_dispclk_mhz ? max_dispclk_mhz :
dcn3_16_soc.clock_limits[closest_clk_lvl].dispclk_mhz;
s[i].dppclk_mhz = max_dppclk_mhz ? max_dppclk_mhz :
dcn3_16_soc.clock_limits[closest_clk_lvl].dppclk_mhz;
s[i].dram_bw_per_chan_gbps =
dcn3_16_soc.clock_limits[closest_clk_lvl].dram_bw_per_chan_gbps;
s[i].dscclk_mhz = dcn3_16_soc.clock_limits[closest_clk_lvl].dscclk_mhz;
s[i].dtbclk_mhz = dcn3_16_soc.clock_limits[closest_clk_lvl].dtbclk_mhz;
s[i].phyclk_d18_mhz =
dcn3_16_soc.clock_limits[closest_clk_lvl].phyclk_d18_mhz;
s[i].phyclk_mhz = dcn3_16_soc.clock_limits[closest_clk_lvl].phyclk_mhz;
}
if (clk_table->num_entries) {
dcn3_16_soc.num_states = clk_table->num_entries;
}
}
memcpy(dcn3_16_soc.clock_limits, s, sizeof(dcn3_16_soc.clock_limits));
if (max_dispclk_mhz) {
dcn3_16_soc.dispclk_dppclk_vco_speed_mhz = max_dispclk_mhz * 2;
dc->dml.soc.dispclk_dppclk_vco_speed_mhz = max_dispclk_mhz * 2;
}
if ((int)(dcn3_16_soc.dram_clock_change_latency_us * 1000)
!= dc->debug.dram_clock_change_latency_ns
&& dc->debug.dram_clock_change_latency_ns) {
dcn3_16_soc.dram_clock_change_latency_us = dc->debug.dram_clock_change_latency_ns / 1000;
}
if (!IS_FPGA_MAXIMUS_DC(dc->ctx->dce_environment))
dml_init_instance(&dc->dml, &dcn3_16_soc, &dcn3_16_ip, DML_PROJECT_DCN31);
else
dml_init_instance(&dc->dml, &dcn3_16_soc, &dcn3_16_ip, DML_PROJECT_DCN31_FPGA);
}
int dcn_get_max_non_odm_pix_rate_100hz(struct _vcs_dpi_soc_bounding_box_st *soc)
{
return soc->clock_limits[0].dispclk_mhz * 10000.0 / (1.0 + soc->dcn_downspread_percent / 100.0);
}
int dcn_get_approx_det_segs_required_for_pstate(
struct _vcs_dpi_soc_bounding_box_st *soc,
int pix_clk_100hz, int bpp, int seg_size_kb)
{
/* Roughly calculate required crb to hide latency. In practice there is slightly
* more buffer available for latency hiding
*/
return (int)(soc->dram_clock_change_latency_us * pix_clk_100hz * bpp
/ 10240000 + seg_size_kb - 1) / seg_size_kb;
}
