Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 | // SPDX-License-Identifier: GPL-2.0-only /* Low-level parallel port routines for the Amiga built-in port * * Author: Joerg Dorchain <joerg@dorchain.net> * * This is a complete rewrite of the code, but based heaviy upon the old * lp_intern. code. * * The built-in Amiga parallel port provides one port at a fixed address * with 8 bidirectional data lines (D0 - D7) and 3 bidirectional status * lines (BUSY, POUT, SEL), 1 output control line /STROBE (raised automatically * in hardware when the data register is accessed), and 1 input control line * /ACK, able to cause an interrupt, but both not directly settable by * software. */ #include <linux/module.h> #include <linux/init.h> #include <linux/parport.h> #include <linux/ioport.h> #include <linux/interrupt.h> #include <linux/platform_device.h> #include <asm/setup.h> #include <asm/amigahw.h> #include <asm/irq.h> #include <asm/io.h> #include <asm/amigaints.h> #undef DEBUG static void amiga_write_data(struct parport *p, unsigned char data) { pr_debug("write_data %c\n", data); /* Triggers also /STROBE. This behavior cannot be changed */ ciaa.prb = data; mb(); } static unsigned char amiga_read_data(struct parport *p) { /* Triggers also /STROBE. This behavior cannot be changed */ return ciaa.prb; } static unsigned char control_amiga_to_pc(unsigned char control) { return PARPORT_CONTROL_SELECT | PARPORT_CONTROL_AUTOFD | PARPORT_CONTROL_STROBE; /* fake value: interrupt enable, select in, no reset, no autolf, no strobe - seems to be closest the wiring diagram */ } static void amiga_write_control(struct parport *p, unsigned char control) { pr_debug("write_control %02x\n", control); /* No implementation possible */ } static unsigned char amiga_read_control( struct parport *p) { pr_debug("read_control\n"); return control_amiga_to_pc(0); } static unsigned char amiga_frob_control( struct parport *p, unsigned char mask, unsigned char val) { unsigned char old; pr_debug("frob_control mask %02x, value %02x\n", mask, val); old = amiga_read_control(p); amiga_write_control(p, (old & ~mask) ^ val); return old; } static unsigned char status_amiga_to_pc(unsigned char status) { unsigned char ret = PARPORT_STATUS_BUSY | PARPORT_STATUS_ACK | PARPORT_STATUS_ERROR; if (status & 1) /* Busy */ ret &= ~PARPORT_STATUS_BUSY; if (status & 2) /* PaperOut */ ret |= PARPORT_STATUS_PAPEROUT; if (status & 4) /* Selected */ ret |= PARPORT_STATUS_SELECT; /* the rest is not connected or handled autonomously in hardware */ return ret; } static unsigned char amiga_read_status(struct parport *p) { unsigned char status; status = status_amiga_to_pc(ciab.pra & 7); pr_debug("read_status %02x\n", status); return status; } static void amiga_enable_irq(struct parport *p) { enable_irq(IRQ_AMIGA_CIAA_FLG); } static void amiga_disable_irq(struct parport *p) { disable_irq(IRQ_AMIGA_CIAA_FLG); } static void amiga_data_forward(struct parport *p) { pr_debug("forward\n"); ciaa.ddrb = 0xff; /* all pins output */ mb(); } static void amiga_data_reverse(struct parport *p) { pr_debug("reverse\n"); ciaa.ddrb = 0; /* all pins input */ mb(); } static void amiga_init_state(struct pardevice *dev, struct parport_state *s) { s->u.amiga.data = 0; s->u.amiga.datadir = 255; s->u.amiga.status = 0; s->u.amiga.statusdir = 0; } static void amiga_save_state(struct parport *p, struct parport_state *s) { mb(); s->u.amiga.data = ciaa.prb; s->u.amiga.datadir = ciaa.ddrb; s->u.amiga.status = ciab.pra & 7; s->u.amiga.statusdir = ciab.ddra & 7; mb(); } static void amiga_restore_state(struct parport *p, struct parport_state *s) { mb(); ciaa.prb = s->u.amiga.data; ciaa.ddrb = s->u.amiga.datadir; ciab.pra |= (ciab.pra & 0xf8) | s->u.amiga.status; ciab.ddra |= (ciab.ddra & 0xf8) | s->u.amiga.statusdir; mb(); } static struct parport_operations pp_amiga_ops = { .write_data = amiga_write_data, .read_data = amiga_read_data, .write_control = amiga_write_control, .read_control = amiga_read_control, .frob_control = amiga_frob_control, .read_status = amiga_read_status, .enable_irq = amiga_enable_irq, .disable_irq = amiga_disable_irq, .data_forward = amiga_data_forward, .data_reverse = amiga_data_reverse, .init_state = amiga_init_state, .save_state = amiga_save_state, .restore_state = amiga_restore_state, .epp_write_data = parport_ieee1284_epp_write_data, .epp_read_data = parport_ieee1284_epp_read_data, .epp_write_addr = parport_ieee1284_epp_write_addr, .epp_read_addr = parport_ieee1284_epp_read_addr, .ecp_write_data = parport_ieee1284_ecp_write_data, .ecp_read_data = parport_ieee1284_ecp_read_data, .ecp_write_addr = parport_ieee1284_ecp_write_addr, .compat_write_data = parport_ieee1284_write_compat, .nibble_read_data = parport_ieee1284_read_nibble, .byte_read_data = parport_ieee1284_read_byte, .owner = THIS_MODULE, }; /* ----------- Initialisation code --------------------------------- */ static int __init amiga_parallel_probe(struct platform_device *pdev) { struct parport *p; int err; ciaa.ddrb = 0xff; ciab.ddra &= 0xf8; mb(); p = parport_register_port((unsigned long)&ciaa.prb, IRQ_AMIGA_CIAA_FLG, PARPORT_DMA_NONE, &pp_amiga_ops); if (!p) return -EBUSY; err = request_irq(IRQ_AMIGA_CIAA_FLG, parport_irq_handler, 0, p->name, p); if (err) goto out_irq; pr_info("%s: Amiga built-in port using irq\n", p->name); /* XXX: set operating mode */ parport_announce_port(p); platform_set_drvdata(pdev, p); return 0; out_irq: parport_put_port(p); return err; } static int __exit amiga_parallel_remove(struct platform_device *pdev) { struct parport *port = platform_get_drvdata(pdev); parport_remove_port(port); if (port->irq != PARPORT_IRQ_NONE) free_irq(IRQ_AMIGA_CIAA_FLG, port); parport_put_port(port); return 0; } static struct platform_driver amiga_parallel_driver = { .remove = __exit_p(amiga_parallel_remove), .driver = { .name = "amiga-parallel", }, }; module_platform_driver_probe(amiga_parallel_driver, amiga_parallel_probe); MODULE_AUTHOR("Joerg Dorchain <joerg@dorchain.net>"); MODULE_DESCRIPTION("Parport Driver for Amiga builtin Port"); MODULE_LICENSE("GPL"); MODULE_ALIAS("platform:amiga-parallel"); |