Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 | // SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Google Veyron (and derivatives) board device tree source * Chromebook specific parts * * Copyright 2015 Google, Inc */ #include <dt-bindings/clock/rockchip,rk808.h> #include <dt-bindings/input/input.h> #include "rk3288-veyron.dtsi" #include "rk3288-veyron-analog-audio.dtsi" #include "rk3288-veyron-edp.dtsi" #include "rk3288-veyron-sdmmc.dtsi" / { aliases { /* Assign 20 so we don't get confused w/ builtin ones */ i2c20 = &i2c_tunnel; }; gpio-charger { compatible = "gpio-charger"; charger-type = "mains"; gpios = <&gpio0 RK_PB0 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&ac_present_ap>; }; lid_switch: lid-switch { compatible = "gpio-keys"; pinctrl-names = "default"; pinctrl-0 = <&ap_lid_int_l>; switch-lid { label = "Lid"; gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_LOW>; wakeup-source; linux,code = <SW_LID>; linux,input-type = <EV_SW>; debounce-interval = <1>; }; }; /* A non-regulated voltage from power supply or battery */ vccsys: vccsys { compatible = "regulator-fixed"; regulator-name = "vccsys"; regulator-boot-on; regulator-always-on; }; vcc33_sys: vcc33-sys { vin-supply = <&vccsys>; }; vcc_5v: vcc-5v { vin-supply = <&vccsys>; }; /* This turns on vbus for host1 (dwc2) */ vcc5_host1: vcc5-host1-regulator { compatible = "regulator-fixed"; enable-active-high; gpio = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&host1_pwr_en>; regulator-name = "vcc5_host1"; regulator-always-on; regulator-boot-on; }; /* This turns on vbus for otg for host mode (dwc2) */ vcc5v_otg: vcc5v-otg-regulator { compatible = "regulator-fixed"; enable-active-high; gpio = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&usbotg_pwren_h>; regulator-name = "vcc5_host2"; regulator-always-on; regulator-boot-on; }; }; &rk808 { vcc11-supply = <&vcc_5v>; regulators { vcc33_ccd: LDO_REG8 { regulator-name = "vcc33_ccd"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-state-mem { regulator-off-in-suspend; }; }; }; }; &spi0 { status = "okay"; cros_ec: ec@0 { compatible = "google,cros-ec-spi"; reg = <0>; google,cros-ec-spi-pre-delay = <30>; interrupt-parent = <&gpio7>; interrupts = <RK_PA7 IRQ_TYPE_LEVEL_LOW>; pinctrl-names = "default"; pinctrl-0 = <&ec_int>; spi-max-frequency = <3000000>; i2c_tunnel: i2c-tunnel { compatible = "google,cros-ec-i2c-tunnel"; google,remote-bus = <0>; #address-cells = <1>; #size-cells = <0>; }; }; }; &i2c4 { trackpad@15 { compatible = "elan,ekth3000"; reg = <0x15>; interrupt-parent = <&gpio7>; interrupts = <RK_PA3 IRQ_TYPE_EDGE_FALLING>; pinctrl-names = "default"; pinctrl-0 = <&trackpad_int>; vcc-supply = <&vcc33_io>; wakeup-source; }; }; &pinctrl { buttons { ap_lid_int_l: ap-lid-int-l { rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>; }; }; charger { ac_present_ap: ac-present-ap { rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>; }; }; cros-ec { ec_int: ec-int { rockchip,pins = <7 RK_PA7 RK_FUNC_GPIO &pcfg_pull_none>; }; }; suspend { suspend_l_wake: suspend-l-wake { rockchip,pins = <0 RK_PC1 RK_FUNC_GPIO &pcfg_output_low>; }; suspend_l_sleep: suspend-l-sleep { rockchip,pins = <0 RK_PC1 RK_FUNC_GPIO &pcfg_output_high>; }; }; trackpad { trackpad_int: trackpad-int { rockchip,pins = <7 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; }; }; usb-host { host1_pwr_en: host1-pwr-en { rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>; }; usbotg_pwren_h: usbotg-pwren-h { rockchip,pins = <0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>; }; }; }; #include "cros-ec-keyboard.dtsi" |