# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/spi/qcom,spi-qup.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Qualcomm Universal Peripheral (QUP) Serial Peripheral Interface (SPI)

maintainers:
  - Andy Gross <agross@kernel.org>
  - Bjorn Andersson <bjorn.andersson@linaro.org>
  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

description:
  The QUP core is an AHB slave that provides a common data path (an output FIFO
  and an input FIFO) for serial peripheral interface (SPI) mini-core.

  SPI in master mode supports up to 50MHz, up to four chip selects,
  programmable data path from 4 bits to 32 bits and numerous protocol variants.

allOf:
  - $ref: /schemas/spi/spi-controller.yaml#

properties:
  compatible:
    enum:
      - qcom,spi-qup-v1.1.1 # for 8660, 8960 and 8064
      - qcom,spi-qup-v2.1.1 # for 8974 and later
      - qcom,spi-qup-v2.2.1 # for 8974 v2 and later

  clocks:
    maxItems: 2

  clock-names:
    items:
      - const: core
      - const: iface

  dmas:
    maxItems: 2

  dma-names:
    items:
      - const: tx
      - const: rx

  interrupts:
    maxItems: 1

  reg:
    maxItems: 1

required:
  - compatible
  - clocks
  - clock-names
  - interrupts
  - reg

unevaluatedProperties: false

examples:
  - |
    #include <dt-bindings/clock/qcom,gcc-msm8996.h>
    #include <dt-bindings/interrupt-controller/arm-gic.h>

    spi@7575000 {
        compatible = "qcom,spi-qup-v2.2.1";
        reg = <0x07575000 0x600>;
        interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
        clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>,
                 <&gcc GCC_BLSP1_AHB_CLK>;
        clock-names = "core", "iface";
        pinctrl-names = "default", "sleep";
        pinctrl-0 = <&blsp1_spi1_default>;
        pinctrl-1 = <&blsp1_spi1_sleep>;
        dmas = <&blsp1_dma 12>, <&blsp1_dma 13>;
        dma-names = "tx", "rx";
        #address-cells = <1>;
        #size-cells = <0>;
    };