Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 593 594 595 596 597 598 599 600 601 602 603 604 605 606 607 608 609 610 611 612 613 614 615 616 617 618 619 620 621 622 623 624 625 626 627 628 629 630 631 632 633 634 635 636 637 638 639 640 641 642 643 644 645 646 647 648 649 650 651 652 653 654 655 656 657 658 659 660 661 662 663 664 665 666 667 668 669 670 671 672 673 674 675 676 677 678 679 680 681 682 683 684 685 686 687 688 689 690 691 692 693 694 695 696 697 698 699 700 701 702 703 704 705 706 707 708 709 710 711 712 713 714 715 716 717 718 719 720 721 722 723 724 725 726 727 728 729 730 731 732 733 734 735 736 737 738 739 740 741 742 743 744 745 746 747 748 749 750 751 752 753 754 755 756 757 758 759 760 761 762 763 764 765 766 767 768 769 770 771 772 773 774 775 776 777 778 779 780 781 782 783 784 785 786 787 788 789 790 791 792 793 794 795 796 797 798 799 800 801 802 803 804 805 806 807 808 809 810 811 812 813 814 815 816 817 818 819 820 821 822 823 824 825 826 827 828 829 830 831 832 833 834 835 836 837 838 839 840 841 842 843 844 845 846 847 848 849 850 851 852 853 854 855 856 857 858 859 860 861 862 863 864 865 866 867 868 869 870 871 872 873 874 875 876 877 878 879 880 881 882 883 884 885 886 887 888 889 890 891 892 893 894 895 896 897 898 899 900 901 902 903 904 905 906 907 908 909 910 911 912 913 914 915 916 917 918 919 920 921 922 923 924 925 926 927 928 929 930 931 932 933 934 935 936 937 938 939 940 941 942 943 944 945 946 947 948 949 950 951 952 953 954 955 956 957 958 959 960 961 962 963 964 965 966 967 968 969 970 971 972 973 974 975 976 977 978 979 980 981 982 983 984 985 986 987 988 989 990 991 992 993 994 995 996 997 998 999 1000 1001 1002 1003 1004 1005 1006 1007 1008 1009 1010 1011 1012 1013 1014 1015 1016 1017 1018 1019 1020 1021 1022 1023 1024 1025 1026 1027 1028 1029 1030 1031 1032 1033 1034 1035 1036 1037 1038 1039 1040 1041 1042 1043 1044 1045 1046 1047 1048 1049 1050 1051 1052 1053 1054 1055 1056 1057 1058 1059 1060 1061 1062 1063 1064 1065 1066 1067 1068 1069 1070 1071 1072 1073 1074 1075 1076 1077 1078 1079 1080 1081 1082 1083 1084 1085 1086 1087 1088 1089 1090 1091 1092 1093 1094 1095 1096 1097 1098 1099 1100 1101 1102 1103 1104 1105 1106 1107 1108 1109 1110 1111 1112 1113 1114 1115 1116 1117 1118 1119 1120 1121 1122 1123 1124 1125 1126 1127 1128 1129 1130 1131 1132 1133 1134 1135 1136 1137 1138 1139 1140 1141 1142 1143 1144 1145 1146 1147 1148 1149 1150 1151 1152 1153 1154 1155 1156 1157 1158 1159 1160 1161 1162 1163 1164 1165 1166 1167 1168 1169 1170 1171 1172 1173 1174 1175 1176 1177 1178 1179 1180 1181 1182 1183 1184 1185 1186 1187 1188 1189 1190 1191 1192 1193 1194 1195 1196 1197 1198 1199 1200 1201 1202 1203 1204 1205 1206 1207 1208 1209 1210 1211 1212 1213 1214 1215 1216 1217 1218 1219 1220 1221 1222 1223 1224 1225 1226 1227 1228 1229 1230 1231 1232 1233 1234 1235 1236 1237 1238 1239 1240 1241 1242 1243 1244 1245 1246 1247 1248 1249 1250 1251 1252 1253 1254 1255 1256 1257 1258 1259 | // SPDX-License-Identifier: GPL-2.0-or-later /* * drivers/ata/sata_dwc_460ex.c * * Synopsys DesignWare Cores (DWC) SATA host driver * * Author: Mark Miesfeld <mmiesfeld@amcc.com> * * Ported from 2.6.19.2 to 2.6.25/26 by Stefan Roese <sr@denx.de> * Copyright 2008 DENX Software Engineering * * Based on versions provided by AMCC and Synopsys which are: * Copyright 2006 Applied Micro Circuits Corporation * COPYRIGHT (C) 2005 SYNOPSYS, INC. ALL RIGHTS RESERVED */ #include <linux/kernel.h> #include <linux/module.h> #include <linux/device.h> #include <linux/dmaengine.h> #include <linux/of_address.h> #include <linux/of_irq.h> #include <linux/of_platform.h> #include <linux/platform_device.h> #include <linux/phy/phy.h> #include <linux/libata.h> #include <linux/slab.h> #include <trace/events/libata.h> #include "libata.h" #include <scsi/scsi_host.h> #include <scsi/scsi_cmnd.h> /* These two are defined in "libata.h" */ #undef DRV_NAME #undef DRV_VERSION #define DRV_NAME "sata-dwc" #define DRV_VERSION "1.3" #define sata_dwc_writel(a, v) writel_relaxed(v, a) #define sata_dwc_readl(a) readl_relaxed(a) #ifndef NO_IRQ #define NO_IRQ 0 #endif #define AHB_DMA_BRST_DFLT 64 /* 16 data items burst length */ enum { SATA_DWC_MAX_PORTS = 1, SATA_DWC_SCR_OFFSET = 0x24, SATA_DWC_REG_OFFSET = 0x64, }; /* DWC SATA Registers */ struct sata_dwc_regs { u32 fptagr; /* 1st party DMA tag */ u32 fpbor; /* 1st party DMA buffer offset */ u32 fptcr; /* 1st party DMA Xfr count */ u32 dmacr; /* DMA Control */ u32 dbtsr; /* DMA Burst Transac size */ u32 intpr; /* Interrupt Pending */ u32 intmr; /* Interrupt Mask */ u32 errmr; /* Error Mask */ u32 llcr; /* Link Layer Control */ u32 phycr; /* PHY Control */ u32 physr; /* PHY Status */ u32 rxbistpd; /* Recvd BIST pattern def register */ u32 rxbistpd1; /* Recvd BIST data dword1 */ u32 rxbistpd2; /* Recvd BIST pattern data dword2 */ u32 txbistpd; /* Trans BIST pattern def register */ u32 txbistpd1; /* Trans BIST data dword1 */ u32 txbistpd2; /* Trans BIST data dword2 */ u32 bistcr; /* BIST Control Register */ u32 bistfctr; /* BIST FIS Count Register */ u32 bistsr; /* BIST Status Register */ u32 bistdecr; /* BIST Dword Error count register */ u32 res[15]; /* Reserved locations */ u32 testr; /* Test Register */ u32 versionr; /* Version Register */ u32 idr; /* ID Register */ u32 unimpl[192]; /* Unimplemented */ u32 dmadr[256]; /* FIFO Locations in DMA Mode */ }; enum { SCR_SCONTROL_DET_ENABLE = 0x00000001, SCR_SSTATUS_DET_PRESENT = 0x00000001, SCR_SERROR_DIAG_X = 0x04000000, /* DWC SATA Register Operations */ SATA_DWC_TXFIFO_DEPTH = 0x01FF, SATA_DWC_RXFIFO_DEPTH = 0x01FF, SATA_DWC_DMACR_TMOD_TXCHEN = 0x00000004, SATA_DWC_DMACR_TXCHEN = (0x00000001 | SATA_DWC_DMACR_TMOD_TXCHEN), SATA_DWC_DMACR_RXCHEN = (0x00000002 | SATA_DWC_DMACR_TMOD_TXCHEN), SATA_DWC_DMACR_TXRXCH_CLEAR = SATA_DWC_DMACR_TMOD_TXCHEN, SATA_DWC_INTPR_DMAT = 0x00000001, SATA_DWC_INTPR_NEWFP = 0x00000002, SATA_DWC_INTPR_PMABRT = 0x00000004, SATA_DWC_INTPR_ERR = 0x00000008, SATA_DWC_INTPR_NEWBIST = 0x00000010, SATA_DWC_INTPR_IPF = 0x10000000, SATA_DWC_INTMR_DMATM = 0x00000001, SATA_DWC_INTMR_NEWFPM = 0x00000002, SATA_DWC_INTMR_PMABRTM = 0x00000004, SATA_DWC_INTMR_ERRM = 0x00000008, SATA_DWC_INTMR_NEWBISTM = 0x00000010, SATA_DWC_LLCR_SCRAMEN = 0x00000001, SATA_DWC_LLCR_DESCRAMEN = 0x00000002, SATA_DWC_LLCR_RPDEN = 0x00000004, /* This is all error bits, zero's are reserved fields. */ SATA_DWC_SERROR_ERR_BITS = 0x0FFF0F03 }; #define SATA_DWC_SCR0_SPD_GET(v) (((v) >> 4) & 0x0000000F) #define SATA_DWC_DMACR_TX_CLEAR(v) (((v) & ~SATA_DWC_DMACR_TXCHEN) |\ SATA_DWC_DMACR_TMOD_TXCHEN) #define SATA_DWC_DMACR_RX_CLEAR(v) (((v) & ~SATA_DWC_DMACR_RXCHEN) |\ SATA_DWC_DMACR_TMOD_TXCHEN) #define SATA_DWC_DBTSR_MWR(size) (((size)/4) & SATA_DWC_TXFIFO_DEPTH) #define SATA_DWC_DBTSR_MRD(size) ((((size)/4) & SATA_DWC_RXFIFO_DEPTH)\ << 16) struct sata_dwc_device { struct device *dev; /* generic device struct */ struct ata_probe_ent *pe; /* ptr to probe-ent */ struct ata_host *host; struct sata_dwc_regs __iomem *sata_dwc_regs; /* DW SATA specific */ u32 sactive_issued; u32 sactive_queued; struct phy *phy; phys_addr_t dmadr; #ifdef CONFIG_SATA_DWC_OLD_DMA struct dw_dma_chip *dma; #endif }; /* * Allow one extra special slot for commands and DMA management * to account for libata internal commands. */ #define SATA_DWC_QCMD_MAX (ATA_MAX_QUEUE + 1) struct sata_dwc_device_port { struct sata_dwc_device *hsdev; int cmd_issued[SATA_DWC_QCMD_MAX]; int dma_pending[SATA_DWC_QCMD_MAX]; /* DMA info */ struct dma_chan *chan; struct dma_async_tx_descriptor *desc[SATA_DWC_QCMD_MAX]; u32 dma_interrupt_count; }; /* * Commonly used DWC SATA driver macros */ #define HSDEV_FROM_HOST(host) ((struct sata_dwc_device *)(host)->private_data) #define HSDEV_FROM_AP(ap) ((struct sata_dwc_device *)(ap)->host->private_data) #define HSDEVP_FROM_AP(ap) ((struct sata_dwc_device_port *)(ap)->private_data) #define HSDEV_FROM_QC(qc) ((struct sata_dwc_device *)(qc)->ap->host->private_data) #define HSDEV_FROM_HSDEVP(p) ((struct sata_dwc_device *)(p)->hsdev) enum { SATA_DWC_CMD_ISSUED_NOT = 0, SATA_DWC_CMD_ISSUED_PEND = 1, SATA_DWC_CMD_ISSUED_EXEC = 2, SATA_DWC_CMD_ISSUED_NODATA = 3, SATA_DWC_DMA_PENDING_NONE = 0, SATA_DWC_DMA_PENDING_TX = 1, SATA_DWC_DMA_PENDING_RX = 2, }; /* * Prototypes */ static void sata_dwc_bmdma_start_by_tag(struct ata_queued_cmd *qc, u8 tag); static int sata_dwc_qc_complete(struct ata_port *ap, struct ata_queued_cmd *qc); static void sata_dwc_dma_xfer_complete(struct ata_port *ap); static void sata_dwc_clear_dmacr(struct sata_dwc_device_port *hsdevp, u8 tag); #ifdef CONFIG_SATA_DWC_OLD_DMA #include <linux/platform_data/dma-dw.h> #include <linux/dma/dw.h> static struct dw_dma_slave sata_dwc_dma_dws = { .src_id = 0, .dst_id = 0, .m_master = 1, .p_master = 0, }; static bool sata_dwc_dma_filter(struct dma_chan *chan, void *param) { struct dw_dma_slave *dws = &sata_dwc_dma_dws; if (dws->dma_dev != chan->device->dev) return false; chan->private = dws; return true; } static int sata_dwc_dma_get_channel_old(struct sata_dwc_device_port *hsdevp) { struct sata_dwc_device *hsdev = hsdevp->hsdev; struct dw_dma_slave *dws = &sata_dwc_dma_dws; struct device *dev = hsdev->dev; dma_cap_mask_t mask; dws->dma_dev = dev; dma_cap_zero(mask); dma_cap_set(DMA_SLAVE, mask); /* Acquire DMA channel */ hsdevp->chan = dma_request_channel(mask, sata_dwc_dma_filter, hsdevp); if (!hsdevp->chan) { dev_err(dev, "%s: dma channel unavailable\n", __func__); return -EAGAIN; } return 0; } static int sata_dwc_dma_init_old(struct platform_device *pdev, struct sata_dwc_device *hsdev) { struct device *dev = &pdev->dev; struct device_node *np = dev->of_node; hsdev->dma = devm_kzalloc(dev, sizeof(*hsdev->dma), GFP_KERNEL); if (!hsdev->dma) return -ENOMEM; hsdev->dma->dev = dev; hsdev->dma->id = pdev->id; /* Get SATA DMA interrupt number */ hsdev->dma->irq = irq_of_parse_and_map(np, 1); if (hsdev->dma->irq == NO_IRQ) { dev_err(dev, "no SATA DMA irq\n"); return -ENODEV; } /* Get physical SATA DMA register base address */ hsdev->dma->regs = devm_platform_ioremap_resource(pdev, 1); if (IS_ERR(hsdev->dma->regs)) return PTR_ERR(hsdev->dma->regs); /* Initialize AHB DMAC */ return dw_dma_probe(hsdev->dma); } static void sata_dwc_dma_exit_old(struct sata_dwc_device *hsdev) { if (!hsdev->dma) return; dw_dma_remove(hsdev->dma); } #endif static const char *get_prot_descript(u8 protocol) { switch (protocol) { case ATA_PROT_NODATA: return "ATA no data"; case ATA_PROT_PIO: return "ATA PIO"; case ATA_PROT_DMA: return "ATA DMA"; case ATA_PROT_NCQ: return "ATA NCQ"; case ATA_PROT_NCQ_NODATA: return "ATA NCQ no data"; case ATAPI_PROT_NODATA: return "ATAPI no data"; case ATAPI_PROT_PIO: return "ATAPI PIO"; case ATAPI_PROT_DMA: return "ATAPI DMA"; default: return "unknown"; } } static void dma_dwc_xfer_done(void *hsdev_instance) { unsigned long flags; struct sata_dwc_device *hsdev = hsdev_instance; struct ata_host *host = (struct ata_host *)hsdev->host; struct ata_port *ap; struct sata_dwc_device_port *hsdevp; u8 tag = 0; unsigned int port = 0; spin_lock_irqsave(&host->lock, flags); ap = host->ports[port]; hsdevp = HSDEVP_FROM_AP(ap); tag = ap->link.active_tag; /* * Each DMA command produces 2 interrupts. Only * complete the command after both interrupts have been * seen. (See sata_dwc_isr()) */ hsdevp->dma_interrupt_count++; sata_dwc_clear_dmacr(hsdevp, tag); if (hsdevp->dma_pending[tag] == SATA_DWC_DMA_PENDING_NONE) { dev_err(ap->dev, "DMA not pending tag=0x%02x pending=%d\n", tag, hsdevp->dma_pending[tag]); } if ((hsdevp->dma_interrupt_count % 2) == 0) sata_dwc_dma_xfer_complete(ap); spin_unlock_irqrestore(&host->lock, flags); } static struct dma_async_tx_descriptor *dma_dwc_xfer_setup(struct ata_queued_cmd *qc) { struct ata_port *ap = qc->ap; struct sata_dwc_device_port *hsdevp = HSDEVP_FROM_AP(ap); struct sata_dwc_device *hsdev = HSDEV_FROM_AP(ap); struct dma_slave_config sconf; struct dma_async_tx_descriptor *desc; if (qc->dma_dir == DMA_DEV_TO_MEM) { sconf.src_addr = hsdev->dmadr; sconf.device_fc = false; } else { /* DMA_MEM_TO_DEV */ sconf.dst_addr = hsdev->dmadr; sconf.device_fc = false; } sconf.direction = qc->dma_dir; sconf.src_maxburst = AHB_DMA_BRST_DFLT / 4; /* in items */ sconf.dst_maxburst = AHB_DMA_BRST_DFLT / 4; /* in items */ sconf.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; sconf.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; dmaengine_slave_config(hsdevp->chan, &sconf); /* Convert SG list to linked list of items (LLIs) for AHB DMA */ desc = dmaengine_prep_slave_sg(hsdevp->chan, qc->sg, qc->n_elem, qc->dma_dir, DMA_PREP_INTERRUPT | DMA_CTRL_ACK); if (!desc) return NULL; desc->callback = dma_dwc_xfer_done; desc->callback_param = hsdev; dev_dbg(hsdev->dev, "%s sg: 0x%p, count: %d addr: %pa\n", __func__, qc->sg, qc->n_elem, &hsdev->dmadr); return desc; } static int sata_dwc_scr_read(struct ata_link *link, unsigned int scr, u32 *val) { if (scr > SCR_NOTIFICATION) { dev_err(link->ap->dev, "%s: Incorrect SCR offset 0x%02x\n", __func__, scr); return -EINVAL; } *val = sata_dwc_readl(link->ap->ioaddr.scr_addr + (scr * 4)); dev_dbg(link->ap->dev, "%s: id=%d reg=%d val=0x%08x\n", __func__, link->ap->print_id, scr, *val); return 0; } static int sata_dwc_scr_write(struct ata_link *link, unsigned int scr, u32 val) { dev_dbg(link->ap->dev, "%s: id=%d reg=%d val=0x%08x\n", __func__, link->ap->print_id, scr, val); if (scr > SCR_NOTIFICATION) { dev_err(link->ap->dev, "%s: Incorrect SCR offset 0x%02x\n", __func__, scr); return -EINVAL; } sata_dwc_writel(link->ap->ioaddr.scr_addr + (scr * 4), val); return 0; } static void clear_serror(struct ata_port *ap) { u32 val; sata_dwc_scr_read(&ap->link, SCR_ERROR, &val); sata_dwc_scr_write(&ap->link, SCR_ERROR, val); } static void clear_interrupt_bit(struct sata_dwc_device *hsdev, u32 bit) { sata_dwc_writel(&hsdev->sata_dwc_regs->intpr, sata_dwc_readl(&hsdev->sata_dwc_regs->intpr)); } static u32 qcmd_tag_to_mask(u8 tag) { return 0x00000001 << (tag & 0x1f); } /* See ahci.c */ static void sata_dwc_error_intr(struct ata_port *ap, struct sata_dwc_device *hsdev, uint intpr) { struct sata_dwc_device_port *hsdevp = HSDEVP_FROM_AP(ap); struct ata_eh_info *ehi = &ap->link.eh_info; unsigned int err_mask = 0, action = 0; struct ata_queued_cmd *qc; u32 serror; u8 status, tag; ata_ehi_clear_desc(ehi); sata_dwc_scr_read(&ap->link, SCR_ERROR, &serror); status = ap->ops->sff_check_status(ap); tag = ap->link.active_tag; dev_err(ap->dev, "%s SCR_ERROR=0x%08x intpr=0x%08x status=0x%08x dma_intp=%d pending=%d issued=%d", __func__, serror, intpr, status, hsdevp->dma_interrupt_count, hsdevp->dma_pending[tag], hsdevp->cmd_issued[tag]); /* Clear error register and interrupt bit */ clear_serror(ap); clear_interrupt_bit(hsdev, SATA_DWC_INTPR_ERR); /* This is the only error happening now. TODO check for exact error */ err_mask |= AC_ERR_HOST_BUS; action |= ATA_EH_RESET; /* Pass this on to EH */ ehi->serror |= serror; ehi->action |= action; qc = ata_qc_from_tag(ap, tag); if (qc) qc->err_mask |= err_mask; else ehi->err_mask |= err_mask; ata_port_abort(ap); } /* * Function : sata_dwc_isr * arguments : irq, void *dev_instance, struct pt_regs *regs * Return value : irqreturn_t - status of IRQ * This Interrupt handler called via port ops registered function. * .irq_handler = sata_dwc_isr */ static irqreturn_t sata_dwc_isr(int irq, void *dev_instance) { struct ata_host *host = (struct ata_host *)dev_instance; struct sata_dwc_device *hsdev = HSDEV_FROM_HOST(host); struct ata_port *ap; struct ata_queued_cmd *qc; unsigned long flags; u8 status, tag; int handled, num_processed, port = 0; uint intpr, sactive, sactive2, tag_mask; struct sata_dwc_device_port *hsdevp; hsdev->sactive_issued = 0; spin_lock_irqsave(&host->lock, flags); /* Read the interrupt register */ intpr = sata_dwc_readl(&hsdev->sata_dwc_regs->intpr); ap = host->ports[port]; hsdevp = HSDEVP_FROM_AP(ap); dev_dbg(ap->dev, "%s intpr=0x%08x active_tag=%d\n", __func__, intpr, ap->link.active_tag); /* Check for error interrupt */ if (intpr & SATA_DWC_INTPR_ERR) { sata_dwc_error_intr(ap, hsdev, intpr); handled = 1; goto DONE; } /* Check for DMA SETUP FIS (FP DMA) interrupt */ if (intpr & SATA_DWC_INTPR_NEWFP) { clear_interrupt_bit(hsdev, SATA_DWC_INTPR_NEWFP); tag = (u8)(sata_dwc_readl(&hsdev->sata_dwc_regs->fptagr)); dev_dbg(ap->dev, "%s: NEWFP tag=%d\n", __func__, tag); if (hsdevp->cmd_issued[tag] != SATA_DWC_CMD_ISSUED_PEND) dev_warn(ap->dev, "CMD tag=%d not pending?\n", tag); hsdev->sactive_issued |= qcmd_tag_to_mask(tag); qc = ata_qc_from_tag(ap, tag); if (unlikely(!qc)) { dev_err(ap->dev, "failed to get qc"); handled = 1; goto DONE; } /* * Start FP DMA for NCQ command. At this point the tag is the * active tag. It is the tag that matches the command about to * be completed. */ trace_ata_bmdma_start(ap, &qc->tf, tag); qc->ap->link.active_tag = tag; sata_dwc_bmdma_start_by_tag(qc, tag); handled = 1; goto DONE; } sata_dwc_scr_read(&ap->link, SCR_ACTIVE, &sactive); tag_mask = (hsdev->sactive_issued | sactive) ^ sactive; /* If no sactive issued and tag_mask is zero then this is not NCQ */ if (hsdev->sactive_issued == 0 && tag_mask == 0) { if (ap->link.active_tag == ATA_TAG_POISON) tag = 0; else tag = ap->link.active_tag; qc = ata_qc_from_tag(ap, tag); /* DEV interrupt w/ no active qc? */ if (unlikely(!qc || (qc->tf.flags & ATA_TFLAG_POLLING))) { dev_err(ap->dev, "%s interrupt with no active qc qc=%p\n", __func__, qc); ap->ops->sff_check_status(ap); handled = 1; goto DONE; } status = ap->ops->sff_check_status(ap); qc->ap->link.active_tag = tag; hsdevp->cmd_issued[tag] = SATA_DWC_CMD_ISSUED_NOT; if (status & ATA_ERR) { dev_dbg(ap->dev, "interrupt ATA_ERR (0x%x)\n", status); sata_dwc_qc_complete(ap, qc); handled = 1; goto DONE; } dev_dbg(ap->dev, "%s non-NCQ cmd interrupt, protocol: %s\n", __func__, get_prot_descript(qc->tf.protocol)); DRVSTILLBUSY: if (ata_is_dma(qc->tf.protocol)) { /* * Each DMA transaction produces 2 interrupts. The DMAC * transfer complete interrupt and the SATA controller * operation done interrupt. The command should be * completed only after both interrupts are seen. */ hsdevp->dma_interrupt_count++; if (hsdevp->dma_pending[tag] == \ SATA_DWC_DMA_PENDING_NONE) { dev_err(ap->dev, "%s: DMA not pending intpr=0x%08x status=0x%08x pending=%d\n", __func__, intpr, status, hsdevp->dma_pending[tag]); } if ((hsdevp->dma_interrupt_count % 2) == 0) sata_dwc_dma_xfer_complete(ap); } else if (ata_is_pio(qc->tf.protocol)) { ata_sff_hsm_move(ap, qc, status, 0); handled = 1; goto DONE; } else { if (unlikely(sata_dwc_qc_complete(ap, qc))) goto DRVSTILLBUSY; } handled = 1; goto DONE; } /* * This is a NCQ command. At this point we need to figure out for which * tags we have gotten a completion interrupt. One interrupt may serve * as completion for more than one operation when commands are queued * (NCQ). We need to process each completed command. */ /* process completed commands */ sata_dwc_scr_read(&ap->link, SCR_ACTIVE, &sactive); tag_mask = (hsdev->sactive_issued | sactive) ^ sactive; if (sactive != 0 || hsdev->sactive_issued > 1 || tag_mask > 1) { dev_dbg(ap->dev, "%s NCQ:sactive=0x%08x sactive_issued=0x%08x tag_mask=0x%08x\n", __func__, sactive, hsdev->sactive_issued, tag_mask); } if ((tag_mask | hsdev->sactive_issued) != hsdev->sactive_issued) { dev_warn(ap->dev, "Bad tag mask? sactive=0x%08x sactive_issued=0x%08x tag_mask=0x%08x\n", sactive, hsdev->sactive_issued, tag_mask); } /* read just to clear ... not bad if currently still busy */ status = ap->ops->sff_check_status(ap); dev_dbg(ap->dev, "%s ATA status register=0x%x\n", __func__, status); tag = 0; num_processed = 0; while (tag_mask) { num_processed++; while (!(tag_mask & 0x00000001)) { tag++; tag_mask <<= 1; } tag_mask &= (~0x00000001); qc = ata_qc_from_tag(ap, tag); if (unlikely(!qc)) { dev_err(ap->dev, "failed to get qc"); handled = 1; goto DONE; } /* To be picked up by completion functions */ qc->ap->link.active_tag = tag; hsdevp->cmd_issued[tag] = SATA_DWC_CMD_ISSUED_NOT; /* Let libata/scsi layers handle error */ if (status & ATA_ERR) { dev_dbg(ap->dev, "%s ATA_ERR (0x%x)\n", __func__, status); sata_dwc_qc_complete(ap, qc); handled = 1; goto DONE; } /* Process completed command */ dev_dbg(ap->dev, "%s NCQ command, protocol: %s\n", __func__, get_prot_descript(qc->tf.protocol)); if (ata_is_dma(qc->tf.protocol)) { hsdevp->dma_interrupt_count++; if (hsdevp->dma_pending[tag] == \ SATA_DWC_DMA_PENDING_NONE) dev_warn(ap->dev, "%s: DMA not pending?\n", __func__); if ((hsdevp->dma_interrupt_count % 2) == 0) sata_dwc_dma_xfer_complete(ap); } else { if (unlikely(sata_dwc_qc_complete(ap, qc))) goto STILLBUSY; } continue; STILLBUSY: ap->stats.idle_irq++; dev_warn(ap->dev, "STILL BUSY IRQ ata%d: irq trap\n", ap->print_id); } /* while tag_mask */ /* * Check to see if any commands completed while we were processing our * initial set of completed commands (read status clears interrupts, * so we might miss a completed command interrupt if one came in while * we were processing --we read status as part of processing a completed * command). */ sata_dwc_scr_read(&ap->link, SCR_ACTIVE, &sactive2); if (sactive2 != sactive) { dev_dbg(ap->dev, "More completed - sactive=0x%x sactive2=0x%x\n", sactive, sactive2); } handled = 1; DONE: spin_unlock_irqrestore(&host->lock, flags); return IRQ_RETVAL(handled); } static void sata_dwc_clear_dmacr(struct sata_dwc_device_port *hsdevp, u8 tag) { struct sata_dwc_device *hsdev = HSDEV_FROM_HSDEVP(hsdevp); u32 dmacr = sata_dwc_readl(&hsdev->sata_dwc_regs->dmacr); if (hsdevp->dma_pending[tag] == SATA_DWC_DMA_PENDING_RX) { dmacr = SATA_DWC_DMACR_RX_CLEAR(dmacr); sata_dwc_writel(&hsdev->sata_dwc_regs->dmacr, dmacr); } else if (hsdevp->dma_pending[tag] == SATA_DWC_DMA_PENDING_TX) { dmacr = SATA_DWC_DMACR_TX_CLEAR(dmacr); sata_dwc_writel(&hsdev->sata_dwc_regs->dmacr, dmacr); } else { /* * This should not happen, it indicates the driver is out of * sync. If it does happen, clear dmacr anyway. */ dev_err(hsdev->dev, "%s DMA protocol RX and TX DMA not pending tag=0x%02x pending=%d dmacr: 0x%08x\n", __func__, tag, hsdevp->dma_pending[tag], dmacr); sata_dwc_writel(&hsdev->sata_dwc_regs->dmacr, SATA_DWC_DMACR_TXRXCH_CLEAR); } } static void sata_dwc_dma_xfer_complete(struct ata_port *ap) { struct ata_queued_cmd *qc; struct sata_dwc_device_port *hsdevp = HSDEVP_FROM_AP(ap); struct sata_dwc_device *hsdev = HSDEV_FROM_AP(ap); u8 tag = 0; tag = ap->link.active_tag; qc = ata_qc_from_tag(ap, tag); if (!qc) { dev_err(ap->dev, "failed to get qc"); return; } if (ata_is_dma(qc->tf.protocol)) { if (hsdevp->dma_pending[tag] == SATA_DWC_DMA_PENDING_NONE) { dev_err(ap->dev, "%s DMA protocol RX and TX DMA not pending dmacr: 0x%08x\n", __func__, sata_dwc_readl(&hsdev->sata_dwc_regs->dmacr)); } hsdevp->dma_pending[tag] = SATA_DWC_DMA_PENDING_NONE; sata_dwc_qc_complete(ap, qc); ap->link.active_tag = ATA_TAG_POISON; } else { sata_dwc_qc_complete(ap, qc); } } static int sata_dwc_qc_complete(struct ata_port *ap, struct ata_queued_cmd *qc) { u8 status = 0; u32 mask = 0x0; u8 tag = qc->hw_tag; struct sata_dwc_device *hsdev = HSDEV_FROM_AP(ap); struct sata_dwc_device_port *hsdevp = HSDEVP_FROM_AP(ap); hsdev->sactive_queued = 0; if (hsdevp->dma_pending[tag] == SATA_DWC_DMA_PENDING_TX) dev_err(ap->dev, "TX DMA PENDING\n"); else if (hsdevp->dma_pending[tag] == SATA_DWC_DMA_PENDING_RX) dev_err(ap->dev, "RX DMA PENDING\n"); dev_dbg(ap->dev, "QC complete cmd=0x%02x status=0x%02x ata%u: protocol=%d\n", qc->tf.command, status, ap->print_id, qc->tf.protocol); /* clear active bit */ mask = (~(qcmd_tag_to_mask(tag))); hsdev->sactive_queued = hsdev->sactive_queued & mask; hsdev->sactive_issued = hsdev->sactive_issued & mask; ata_qc_complete(qc); return 0; } static void sata_dwc_enable_interrupts(struct sata_dwc_device *hsdev) { /* Enable selective interrupts by setting the interrupt maskregister*/ sata_dwc_writel(&hsdev->sata_dwc_regs->intmr, SATA_DWC_INTMR_ERRM | SATA_DWC_INTMR_NEWFPM | SATA_DWC_INTMR_PMABRTM | SATA_DWC_INTMR_DMATM); /* * Unmask the error bits that should trigger an error interrupt by * setting the error mask register. */ sata_dwc_writel(&hsdev->sata_dwc_regs->errmr, SATA_DWC_SERROR_ERR_BITS); dev_dbg(hsdev->dev, "%s: INTMR = 0x%08x, ERRMR = 0x%08x\n", __func__, sata_dwc_readl(&hsdev->sata_dwc_regs->intmr), sata_dwc_readl(&hsdev->sata_dwc_regs->errmr)); } static void sata_dwc_setup_port(struct ata_ioports *port, void __iomem *base) { port->cmd_addr = base + 0x00; port->data_addr = base + 0x00; port->error_addr = base + 0x04; port->feature_addr = base + 0x04; port->nsect_addr = base + 0x08; port->lbal_addr = base + 0x0c; port->lbam_addr = base + 0x10; port->lbah_addr = base + 0x14; port->device_addr = base + 0x18; port->command_addr = base + 0x1c; port->status_addr = base + 0x1c; port->altstatus_addr = base + 0x20; port->ctl_addr = base + 0x20; } static int sata_dwc_dma_get_channel(struct sata_dwc_device_port *hsdevp) { struct sata_dwc_device *hsdev = hsdevp->hsdev; struct device *dev = hsdev->dev; #ifdef CONFIG_SATA_DWC_OLD_DMA if (!of_find_property(dev->of_node, "dmas", NULL)) return sata_dwc_dma_get_channel_old(hsdevp); #endif hsdevp->chan = dma_request_chan(dev, "sata-dma"); if (IS_ERR(hsdevp->chan)) { dev_err(dev, "failed to allocate dma channel: %ld\n", PTR_ERR(hsdevp->chan)); return PTR_ERR(hsdevp->chan); } return 0; } /* * Function : sata_dwc_port_start * arguments : struct ata_ioports *port * Return value : returns 0 if success, error code otherwise * This function allocates the scatter gather LLI table for AHB DMA */ static int sata_dwc_port_start(struct ata_port *ap) { int err = 0; struct sata_dwc_device *hsdev; struct sata_dwc_device_port *hsdevp = NULL; struct device *pdev; int i; hsdev = HSDEV_FROM_AP(ap); dev_dbg(ap->dev, "%s: port_no=%d\n", __func__, ap->port_no); hsdev->host = ap->host; pdev = ap->host->dev; if (!pdev) { dev_err(ap->dev, "%s: no ap->host->dev\n", __func__); err = -ENODEV; goto CLEANUP; } /* Allocate Port Struct */ hsdevp = kzalloc(sizeof(*hsdevp), GFP_KERNEL); if (!hsdevp) { err = -ENOMEM; goto CLEANUP; } hsdevp->hsdev = hsdev; err = sata_dwc_dma_get_channel(hsdevp); if (err) goto CLEANUP_ALLOC; err = phy_power_on(hsdev->phy); if (err) goto CLEANUP_ALLOC; for (i = 0; i < SATA_DWC_QCMD_MAX; i++) hsdevp->cmd_issued[i] = SATA_DWC_CMD_ISSUED_NOT; ap->bmdma_prd = NULL; /* set these so libata doesn't use them */ ap->bmdma_prd_dma = 0; if (ap->port_no == 0) { dev_dbg(ap->dev, "%s: clearing TXCHEN, RXCHEN in DMAC\n", __func__); sata_dwc_writel(&hsdev->sata_dwc_regs->dmacr, SATA_DWC_DMACR_TXRXCH_CLEAR); dev_dbg(ap->dev, "%s: setting burst size in DBTSR\n", __func__); sata_dwc_writel(&hsdev->sata_dwc_regs->dbtsr, (SATA_DWC_DBTSR_MWR(AHB_DMA_BRST_DFLT) | SATA_DWC_DBTSR_MRD(AHB_DMA_BRST_DFLT))); } /* Clear any error bits before libata starts issuing commands */ clear_serror(ap); ap->private_data = hsdevp; dev_dbg(ap->dev, "%s: done\n", __func__); return 0; CLEANUP_ALLOC: kfree(hsdevp); CLEANUP: dev_dbg(ap->dev, "%s: fail. ap->id = %d\n", __func__, ap->print_id); return err; } static void sata_dwc_port_stop(struct ata_port *ap) { struct sata_dwc_device_port *hsdevp = HSDEVP_FROM_AP(ap); struct sata_dwc_device *hsdev = HSDEV_FROM_AP(ap); dev_dbg(ap->dev, "%s: ap->id = %d\n", __func__, ap->print_id); dmaengine_terminate_sync(hsdevp->chan); dma_release_channel(hsdevp->chan); phy_power_off(hsdev->phy); kfree(hsdevp); ap->private_data = NULL; } /* * Function : sata_dwc_exec_command_by_tag * arguments : ata_port *ap, ata_taskfile *tf, u8 tag, u32 cmd_issued * Return value : None * This function keeps track of individual command tag ids and calls * ata_exec_command in libata */ static void sata_dwc_exec_command_by_tag(struct ata_port *ap, struct ata_taskfile *tf, u8 tag, u32 cmd_issued) { struct sata_dwc_device_port *hsdevp = HSDEVP_FROM_AP(ap); hsdevp->cmd_issued[tag] = cmd_issued; /* * Clear SError before executing a new command. * sata_dwc_scr_write and read can not be used here. Clearing the PM * managed SError register for the disk needs to be done before the * task file is loaded. */ clear_serror(ap); ata_sff_exec_command(ap, tf); } static void sata_dwc_bmdma_setup_by_tag(struct ata_queued_cmd *qc, u8 tag) { sata_dwc_exec_command_by_tag(qc->ap, &qc->tf, tag, SATA_DWC_CMD_ISSUED_PEND); } static void sata_dwc_bmdma_setup(struct ata_queued_cmd *qc) { u8 tag = qc->hw_tag; if (!ata_is_ncq(qc->tf.protocol)) tag = 0; sata_dwc_bmdma_setup_by_tag(qc, tag); } static void sata_dwc_bmdma_start_by_tag(struct ata_queued_cmd *qc, u8 tag) { int start_dma; u32 reg; struct sata_dwc_device *hsdev = HSDEV_FROM_QC(qc); struct ata_port *ap = qc->ap; struct sata_dwc_device_port *hsdevp = HSDEVP_FROM_AP(ap); struct dma_async_tx_descriptor *desc = hsdevp->desc[tag]; int dir = qc->dma_dir; if (hsdevp->cmd_issued[tag] != SATA_DWC_CMD_ISSUED_NOT) { start_dma = 1; if (dir == DMA_TO_DEVICE) hsdevp->dma_pending[tag] = SATA_DWC_DMA_PENDING_TX; else hsdevp->dma_pending[tag] = SATA_DWC_DMA_PENDING_RX; } else { dev_err(ap->dev, "%s: Command not pending cmd_issued=%d (tag=%d) DMA NOT started\n", __func__, hsdevp->cmd_issued[tag], tag); start_dma = 0; } if (start_dma) { sata_dwc_scr_read(&ap->link, SCR_ERROR, ®); if (reg & SATA_DWC_SERROR_ERR_BITS) { dev_err(ap->dev, "%s: ****** SError=0x%08x ******\n", __func__, reg); } if (dir == DMA_TO_DEVICE) sata_dwc_writel(&hsdev->sata_dwc_regs->dmacr, SATA_DWC_DMACR_TXCHEN); else sata_dwc_writel(&hsdev->sata_dwc_regs->dmacr, SATA_DWC_DMACR_RXCHEN); /* Enable AHB DMA transfer on the specified channel */ dmaengine_submit(desc); dma_async_issue_pending(hsdevp->chan); } } static void sata_dwc_bmdma_start(struct ata_queued_cmd *qc) { u8 tag = qc->hw_tag; if (!ata_is_ncq(qc->tf.protocol)) tag = 0; sata_dwc_bmdma_start_by_tag(qc, tag); } static unsigned int sata_dwc_qc_issue(struct ata_queued_cmd *qc) { u32 sactive; u8 tag = qc->hw_tag; struct ata_port *ap = qc->ap; struct sata_dwc_device_port *hsdevp = HSDEVP_FROM_AP(ap); if (!ata_is_ncq(qc->tf.protocol)) tag = 0; if (ata_is_dma(qc->tf.protocol)) { hsdevp->desc[tag] = dma_dwc_xfer_setup(qc); if (!hsdevp->desc[tag]) return AC_ERR_SYSTEM; } else { hsdevp->desc[tag] = NULL; } if (ata_is_ncq(qc->tf.protocol)) { sata_dwc_scr_read(&ap->link, SCR_ACTIVE, &sactive); sactive |= (0x00000001 << tag); sata_dwc_scr_write(&ap->link, SCR_ACTIVE, sactive); trace_ata_tf_load(ap, &qc->tf); ap->ops->sff_tf_load(ap, &qc->tf); trace_ata_exec_command(ap, &qc->tf, tag); sata_dwc_exec_command_by_tag(ap, &qc->tf, tag, SATA_DWC_CMD_ISSUED_PEND); } else { return ata_bmdma_qc_issue(qc); } return 0; } static void sata_dwc_error_handler(struct ata_port *ap) { ata_sff_error_handler(ap); } static int sata_dwc_hardreset(struct ata_link *link, unsigned int *class, unsigned long deadline) { struct sata_dwc_device *hsdev = HSDEV_FROM_AP(link->ap); int ret; ret = sata_sff_hardreset(link, class, deadline); sata_dwc_enable_interrupts(hsdev); /* Reconfigure the DMA control register */ sata_dwc_writel(&hsdev->sata_dwc_regs->dmacr, SATA_DWC_DMACR_TXRXCH_CLEAR); /* Reconfigure the DMA Burst Transaction Size register */ sata_dwc_writel(&hsdev->sata_dwc_regs->dbtsr, SATA_DWC_DBTSR_MWR(AHB_DMA_BRST_DFLT) | SATA_DWC_DBTSR_MRD(AHB_DMA_BRST_DFLT)); return ret; } static void sata_dwc_dev_select(struct ata_port *ap, unsigned int device) { /* SATA DWC is master only */ } /* * scsi mid-layer and libata interface structures */ static struct scsi_host_template sata_dwc_sht = { ATA_NCQ_SHT(DRV_NAME), /* * test-only: Currently this driver doesn't handle NCQ * correctly. We enable NCQ but set the queue depth to a * max of 1. This will get fixed in in a future release. */ .sg_tablesize = LIBATA_MAX_PRD, /* .can_queue = ATA_MAX_QUEUE, */ /* * Make sure a LLI block is not created that will span 8K max FIS * boundary. If the block spans such a FIS boundary, there is a chance * that a DMA burst will cross that boundary -- this results in an * error in the host controller. */ .dma_boundary = 0x1fff /* ATA_DMA_BOUNDARY */, }; static struct ata_port_operations sata_dwc_ops = { .inherits = &ata_sff_port_ops, .error_handler = sata_dwc_error_handler, .hardreset = sata_dwc_hardreset, .qc_issue = sata_dwc_qc_issue, .scr_read = sata_dwc_scr_read, .scr_write = sata_dwc_scr_write, .port_start = sata_dwc_port_start, .port_stop = sata_dwc_port_stop, .sff_dev_select = sata_dwc_dev_select, .bmdma_setup = sata_dwc_bmdma_setup, .bmdma_start = sata_dwc_bmdma_start, }; static const struct ata_port_info sata_dwc_port_info[] = { { .flags = ATA_FLAG_SATA | ATA_FLAG_NCQ, .pio_mask = ATA_PIO4, .udma_mask = ATA_UDMA6, .port_ops = &sata_dwc_ops, }, }; static int sata_dwc_probe(struct platform_device *ofdev) { struct device *dev = &ofdev->dev; struct device_node *np = dev->of_node; struct sata_dwc_device *hsdev; u32 idr, versionr; char *ver = (char *)&versionr; void __iomem *base; int err = 0; int irq; struct ata_host *host; struct ata_port_info pi = sata_dwc_port_info[0]; const struct ata_port_info *ppi[] = { &pi, NULL }; struct resource *res; /* Allocate DWC SATA device */ host = ata_host_alloc_pinfo(dev, ppi, SATA_DWC_MAX_PORTS); hsdev = devm_kzalloc(dev, sizeof(*hsdev), GFP_KERNEL); if (!host || !hsdev) return -ENOMEM; host->private_data = hsdev; /* Ioremap SATA registers */ base = devm_platform_get_and_ioremap_resource(ofdev, 0, &res); if (IS_ERR(base)) return PTR_ERR(base); dev_dbg(dev, "ioremap done for SATA register address\n"); /* Synopsys DWC SATA specific Registers */ hsdev->sata_dwc_regs = base + SATA_DWC_REG_OFFSET; hsdev->dmadr = res->start + SATA_DWC_REG_OFFSET + offsetof(struct sata_dwc_regs, dmadr); /* Setup port */ host->ports[0]->ioaddr.cmd_addr = base; host->ports[0]->ioaddr.scr_addr = base + SATA_DWC_SCR_OFFSET; sata_dwc_setup_port(&host->ports[0]->ioaddr, base); /* Read the ID and Version Registers */ idr = sata_dwc_readl(&hsdev->sata_dwc_regs->idr); versionr = sata_dwc_readl(&hsdev->sata_dwc_regs->versionr); dev_notice(dev, "id %d, controller version %c.%c%c\n", idr, ver[0], ver[1], ver[2]); /* Save dev for later use in dev_xxx() routines */ hsdev->dev = dev; /* Enable SATA Interrupts */ sata_dwc_enable_interrupts(hsdev); /* Get SATA interrupt number */ irq = irq_of_parse_and_map(np, 0); if (irq == NO_IRQ) { dev_err(dev, "no SATA DMA irq\n"); return -ENODEV; } #ifdef CONFIG_SATA_DWC_OLD_DMA if (!of_find_property(np, "dmas", NULL)) { err = sata_dwc_dma_init_old(ofdev, hsdev); if (err) return err; } #endif hsdev->phy = devm_phy_optional_get(dev, "sata-phy"); if (IS_ERR(hsdev->phy)) return PTR_ERR(hsdev->phy); err = phy_init(hsdev->phy); if (err) goto error_out; /* * Now, register with libATA core, this will also initiate the * device discovery process, invoking our port_start() handler & * error_handler() to execute a dummy Softreset EH session */ err = ata_host_activate(host, irq, sata_dwc_isr, 0, &sata_dwc_sht); if (err) dev_err(dev, "failed to activate host"); return 0; error_out: phy_exit(hsdev->phy); return err; } static int sata_dwc_remove(struct platform_device *ofdev) { struct device *dev = &ofdev->dev; struct ata_host *host = dev_get_drvdata(dev); struct sata_dwc_device *hsdev = host->private_data; ata_host_detach(host); phy_exit(hsdev->phy); #ifdef CONFIG_SATA_DWC_OLD_DMA /* Free SATA DMA resources */ sata_dwc_dma_exit_old(hsdev); #endif dev_dbg(dev, "done\n"); return 0; } static const struct of_device_id sata_dwc_match[] = { { .compatible = "amcc,sata-460ex", }, {} }; MODULE_DEVICE_TABLE(of, sata_dwc_match); static struct platform_driver sata_dwc_driver = { .driver = { .name = DRV_NAME, .of_match_table = sata_dwc_match, }, .probe = sata_dwc_probe, .remove = sata_dwc_remove, }; module_platform_driver(sata_dwc_driver); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Mark Miesfeld <mmiesfeld@amcc.com>"); MODULE_DESCRIPTION("DesignWare Cores SATA controller low level driver"); MODULE_VERSION(DRV_VERSION); |