Linux Audio

Check our new training course

Embedded Linux Audio

Check our new training course
with Creative Commons CC-BY-SA
lecture materials

Bootlin logo

Elixir Cross Referencer

Loading...
  1
  2
  3
  4
  5
  6
  7
  8
  9
 10
 11
 12
 13
 14
 15
 16
 17
 18
 19
 20
 21
 22
 23
 24
 25
 26
 27
 28
 29
 30
 31
 32
 33
 34
 35
 36
 37
 38
 39
 40
 41
 42
 43
 44
 45
 46
 47
 48
 49
 50
 51
 52
 53
 54
 55
 56
 57
 58
 59
 60
 61
 62
 63
 64
 65
 66
 67
 68
 69
 70
 71
 72
 73
 74
 75
 76
 77
 78
 79
 80
 81
 82
 83
 84
 85
 86
 87
 88
 89
 90
 91
 92
 93
 94
 95
 96
 97
 98
 99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
// SPDX-License-Identifier: GPL-2.0
// TI LP50XX LED chip family driver
// Copyright (C) 2018-20 Texas Instruments Incorporated - https://www.ti.com/

#include <linux/gpio/consumer.h>
#include <linux/i2c.h>
#include <linux/init.h>
#include <linux/leds.h>
#include <linux/mod_devicetable.h>
#include <linux/module.h>
#include <linux/mutex.h>
#include <linux/regmap.h>
#include <linux/regulator/consumer.h>
#include <linux/slab.h>
#include <uapi/linux/uleds.h>

#include <linux/led-class-multicolor.h>

#include "leds.h"

#define LP50XX_DEV_CFG0		0x00
#define LP50XX_DEV_CFG1		0x01
#define LP50XX_LED_CFG0		0x02

/* LP5009 and LP5012 registers */
#define LP5012_BNK_BRT		0x03
#define LP5012_BNKA_CLR		0x04
#define LP5012_BNKB_CLR		0x05
#define LP5012_BNKC_CLR		0x06
#define LP5012_LED0_BRT		0x07
#define LP5012_OUT0_CLR		0x0b
#define LP5012_RESET		0x17

/* LP5018 and LP5024 registers */
#define LP5024_BNK_BRT		0x03
#define LP5024_BNKA_CLR		0x04
#define LP5024_BNKB_CLR		0x05
#define LP5024_BNKC_CLR		0x06
#define LP5024_LED0_BRT		0x07
#define LP5024_OUT0_CLR		0x0f
#define LP5024_RESET		0x27

/* LP5030 and LP5036 registers */
#define LP5036_LED_CFG1		0x03
#define LP5036_BNK_BRT		0x04
#define LP5036_BNKA_CLR		0x05
#define LP5036_BNKB_CLR		0x06
#define LP5036_BNKC_CLR		0x07
#define LP5036_LED0_BRT		0x08
#define LP5036_OUT0_CLR		0x14
#define LP5036_RESET		0x38

#define LP50XX_SW_RESET		0xff
#define LP50XX_CHIP_EN		BIT(6)

/* There are 3 LED outputs per bank */
#define LP50XX_LEDS_PER_MODULE	3

#define LP5009_MAX_LED_MODULES	2
#define LP5012_MAX_LED_MODULES	4
#define LP5018_MAX_LED_MODULES	6
#define LP5024_MAX_LED_MODULES	8
#define LP5030_MAX_LED_MODULES	10
#define LP5036_MAX_LED_MODULES	12

static const struct reg_default lp5012_reg_defs[] = {
	{LP50XX_DEV_CFG0, 0x0},
	{LP50XX_DEV_CFG1, 0x3c},
	{LP50XX_LED_CFG0, 0x0},
	{LP5012_BNK_BRT, 0xff},
	{LP5012_BNKA_CLR, 0x0f},
	{LP5012_BNKB_CLR, 0x0f},
	{LP5012_BNKC_CLR, 0x0f},
	{LP5012_LED0_BRT, 0x0f},
	/* LEDX_BRT registers are all 0xff for defaults */
	{0x08, 0xff}, {0x09, 0xff}, {0x0a, 0xff},
	{LP5012_OUT0_CLR, 0x0f},
	/* OUTX_CLR registers are all 0x0 for defaults */
	{0x0c, 0x00}, {0x0d, 0x00}, {0x0e, 0x00}, {0x0f, 0x00}, {0x10, 0x00},
	{0x11, 0x00}, {0x12, 0x00}, {0x13, 0x00}, {0x14, 0x00},	{0x15, 0x00},
	{0x16, 0x00},
	{LP5012_RESET, 0x00}
};

static const struct reg_default lp5024_reg_defs[] = {
	{LP50XX_DEV_CFG0, 0x0},
	{LP50XX_DEV_CFG1, 0x3c},
	{LP50XX_LED_CFG0, 0x0},
	{LP5024_BNK_BRT, 0xff},
	{LP5024_BNKA_CLR, 0x0f},
	{LP5024_BNKB_CLR, 0x0f},
	{LP5024_BNKC_CLR, 0x0f},
	{LP5024_LED0_BRT, 0x0f},
	/* LEDX_BRT registers are all 0xff for defaults */
	{0x08, 0xff}, {0x09, 0xff}, {0x0a, 0xff}, {0x0b, 0xff}, {0x0c, 0xff},
	{0x0d, 0xff}, {0x0e, 0xff},
	{LP5024_OUT0_CLR, 0x0f},
	/* OUTX_CLR registers are all 0x0 for defaults */
	{0x10, 0x00}, {0x11, 0x00}, {0x12, 0x00}, {0x13, 0x00}, {0x14, 0x00},
	{0x15, 0x00}, {0x16, 0x00}, {0x17, 0x00}, {0x18, 0x00}, {0x19, 0x00},
	{0x1a, 0x00}, {0x1b, 0x00}, {0x1c, 0x00}, {0x1d, 0x00}, {0x1e, 0x00},
	{0x1f, 0x00}, {0x20, 0x00}, {0x21, 0x00}, {0x22, 0x00}, {0x23, 0x00},
	{0x24, 0x00}, {0x25, 0x00}, {0x26, 0x00},
	{LP5024_RESET, 0x00}
};

static const struct reg_default lp5036_reg_defs[] = {
	{LP50XX_DEV_CFG0, 0x0},
	{LP50XX_DEV_CFG1, 0x3c},
	{LP50XX_LED_CFG0, 0x0},
	{LP5036_LED_CFG1, 0x0},
	{LP5036_BNK_BRT, 0xff},
	{LP5036_BNKA_CLR, 0x0f},
	{LP5036_BNKB_CLR, 0x0f},
	{LP5036_BNKC_CLR, 0x0f},
	{LP5036_LED0_BRT, 0x0f},
	/* LEDX_BRT registers are all 0xff for defaults */
	{0x08, 0xff}, {0x09, 0xff}, {0x0a, 0xff}, {0x0b, 0xff}, {0x0c, 0xff},
	{0x0d, 0xff}, {0x0e, 0xff}, {0x0f, 0xff}, {0x10, 0xff}, {0x11, 0xff},
	{0x12, 0xff}, {0x13, 0xff},
	{LP5036_OUT0_CLR, 0x0f},
	/* OUTX_CLR registers are all 0x0 for defaults */
	{0x15, 0x00}, {0x16, 0x00}, {0x17, 0x00}, {0x18, 0x00}, {0x19, 0x00},
	{0x1a, 0x00}, {0x1b, 0x00}, {0x1c, 0x00}, {0x1d, 0x00}, {0x1e, 0x00},
	{0x1f, 0x00}, {0x20, 0x00}, {0x21, 0x00}, {0x22, 0x00}, {0x23, 0x00},
	{0x24, 0x00}, {0x25, 0x00}, {0x26, 0x00}, {0x27, 0x00}, {0x28, 0x00},
	{0x29, 0x00}, {0x2a, 0x00}, {0x2b, 0x00}, {0x2c, 0x00}, {0x2d, 0x00},
	{0x2e, 0x00}, {0x2f, 0x00}, {0x30, 0x00}, {0x31, 0x00}, {0x32, 0x00},
	{0x33, 0x00}, {0x34, 0x00}, {0x35, 0x00}, {0x36, 0x00}, {0x37, 0x00},
	{LP5036_RESET, 0x00}
};

static const struct regmap_config lp5012_regmap_config = {
	.reg_bits = 8,
	.val_bits = 8,

	.max_register = LP5012_RESET,
	.reg_defaults = lp5012_reg_defs,
	.num_reg_defaults = ARRAY_SIZE(lp5012_reg_defs),
	.cache_type = REGCACHE_FLAT,
};

static const struct regmap_config lp5024_regmap_config = {
	.reg_bits = 8,
	.val_bits = 8,

	.max_register = LP5024_RESET,
	.reg_defaults = lp5024_reg_defs,
	.num_reg_defaults = ARRAY_SIZE(lp5024_reg_defs),
	.cache_type = REGCACHE_FLAT,
};

static const struct regmap_config lp5036_regmap_config = {
	.reg_bits = 8,
	.val_bits = 8,

	.max_register = LP5036_RESET,
	.reg_defaults = lp5036_reg_defs,
	.num_reg_defaults = ARRAY_SIZE(lp5036_reg_defs),
	.cache_type = REGCACHE_FLAT,
};

enum lp50xx_model {
	LP5009,
	LP5012,
	LP5018,
	LP5024,
	LP5030,
	LP5036,
};

/**
 * struct lp50xx_chip_info -
 * @lp50xx_regmap_config: regmap register configuration
 * @model_id: LED device model
 * @max_modules: total number of supported LED modules
 * @num_leds: number of LED outputs available on the device
 * @led_brightness0_reg: first brightness register of the device
 * @mix_out0_reg: first color mix register of the device
 * @bank_brt_reg: bank brightness register
 * @bank_mix_reg: color mix register
 * @reset_reg: device reset register
 */
struct lp50xx_chip_info {
	const struct regmap_config *lp50xx_regmap_config;
	int model_id;
	u8 max_modules;
	u8 num_leds;
	u8 led_brightness0_reg;
	u8 mix_out0_reg;
	u8 bank_brt_reg;
	u8 bank_mix_reg;
	u8 reset_reg;
};

static const struct lp50xx_chip_info lp50xx_chip_info_tbl[] = {
	[LP5009] = {
		.model_id = LP5009,
		.max_modules = LP5009_MAX_LED_MODULES,
		.num_leds = LP5009_MAX_LED_MODULES * LP50XX_LEDS_PER_MODULE,
		.led_brightness0_reg = LP5012_LED0_BRT,
		.mix_out0_reg = LP5012_OUT0_CLR,
		.bank_brt_reg = LP5012_BNK_BRT,
		.bank_mix_reg = LP5012_BNKA_CLR,
		.reset_reg = LP5012_RESET,
		.lp50xx_regmap_config = &lp5012_regmap_config,
	},
	[LP5012] = {
		.model_id = LP5012,
		.max_modules = LP5012_MAX_LED_MODULES,
		.num_leds = LP5012_MAX_LED_MODULES * LP50XX_LEDS_PER_MODULE,
		.led_brightness0_reg = LP5012_LED0_BRT,
		.mix_out0_reg = LP5012_OUT0_CLR,
		.bank_brt_reg = LP5012_BNK_BRT,
		.bank_mix_reg = LP5012_BNKA_CLR,
		.reset_reg = LP5012_RESET,
		.lp50xx_regmap_config = &lp5012_regmap_config,
	},
	[LP5018] = {
		.model_id = LP5018,
		.max_modules = LP5018_MAX_LED_MODULES,
		.num_leds = LP5018_MAX_LED_MODULES * LP50XX_LEDS_PER_MODULE,
		.led_brightness0_reg = LP5024_LED0_BRT,
		.mix_out0_reg = LP5024_OUT0_CLR,
		.bank_brt_reg = LP5024_BNK_BRT,
		.bank_mix_reg = LP5024_BNKA_CLR,
		.reset_reg = LP5024_RESET,
		.lp50xx_regmap_config = &lp5024_regmap_config,
	},
	[LP5024] = {
		.model_id = LP5024,
		.max_modules = LP5024_MAX_LED_MODULES,
		.num_leds = LP5024_MAX_LED_MODULES * LP50XX_LEDS_PER_MODULE,
		.led_brightness0_reg = LP5024_LED0_BRT,
		.mix_out0_reg = LP5024_OUT0_CLR,
		.bank_brt_reg = LP5024_BNK_BRT,
		.bank_mix_reg = LP5024_BNKA_CLR,
		.reset_reg = LP5024_RESET,
		.lp50xx_regmap_config = &lp5024_regmap_config,
	},
	[LP5030] = {
		.model_id = LP5030,
		.max_modules = LP5030_MAX_LED_MODULES,
		.num_leds = LP5030_MAX_LED_MODULES * LP50XX_LEDS_PER_MODULE,
		.led_brightness0_reg = LP5036_LED0_BRT,
		.mix_out0_reg = LP5036_OUT0_CLR,
		.bank_brt_reg = LP5036_BNK_BRT,
		.bank_mix_reg = LP5036_BNKA_CLR,
		.reset_reg = LP5036_RESET,
		.lp50xx_regmap_config = &lp5036_regmap_config,
	},
	[LP5036] = {
		.model_id = LP5036,
		.max_modules = LP5036_MAX_LED_MODULES,
		.num_leds = LP5036_MAX_LED_MODULES * LP50XX_LEDS_PER_MODULE,
		.led_brightness0_reg = LP5036_LED0_BRT,
		.mix_out0_reg = LP5036_OUT0_CLR,
		.bank_brt_reg = LP5036_BNK_BRT,
		.bank_mix_reg = LP5036_BNKA_CLR,
		.reset_reg = LP5036_RESET,
		.lp50xx_regmap_config = &lp5036_regmap_config,
	},
};

struct lp50xx_led {
	struct led_classdev_mc mc_cdev;
	struct lp50xx *priv;
	unsigned long bank_modules;
	u8 ctrl_bank_enabled;
	int led_number;
};

/**
 * struct lp50xx -
 * @enable_gpio: hardware enable gpio
 * @regulator: LED supply regulator pointer
 * @client: pointer to the I2C client
 * @regmap: device register map
 * @dev: pointer to the devices device struct
 * @lock: lock for reading/writing the device
 * @chip_info: chip specific information (ie num_leds)
 * @num_of_banked_leds: holds the number of banked LEDs
 * @leds: array of LED strings
 */
struct lp50xx {
	struct gpio_desc *enable_gpio;
	struct regulator *regulator;
	struct i2c_client *client;
	struct regmap *regmap;
	struct device *dev;
	struct mutex lock;
	const struct lp50xx_chip_info *chip_info;
	int num_of_banked_leds;

	/* This needs to be at the end of the struct */
	struct lp50xx_led leds[];
};

static struct lp50xx_led *mcled_cdev_to_led(struct led_classdev_mc *mc_cdev)
{
	return container_of(mc_cdev, struct lp50xx_led, mc_cdev);
}

static int lp50xx_brightness_set(struct led_classdev *cdev,
			     enum led_brightness brightness)
{
	struct led_classdev_mc *mc_dev = lcdev_to_mccdev(cdev);
	struct lp50xx_led *led = mcled_cdev_to_led(mc_dev);
	const struct lp50xx_chip_info *led_chip = led->priv->chip_info;
	u8 led_offset, reg_val;
	int ret = 0;
	int i;

	mutex_lock(&led->priv->lock);
	if (led->ctrl_bank_enabled)
		reg_val = led_chip->bank_brt_reg;
	else
		reg_val = led_chip->led_brightness0_reg +
			  led->led_number;

	ret = regmap_write(led->priv->regmap, reg_val, brightness);
	if (ret) {
		dev_err(led->priv->dev,
			"Cannot write brightness value %d\n", ret);
		goto out;
	}

	for (i = 0; i < led->mc_cdev.num_colors; i++) {
		if (led->ctrl_bank_enabled) {
			reg_val = led_chip->bank_mix_reg + i;
		} else {
			led_offset = (led->led_number * 3) + i;
			reg_val = led_chip->mix_out0_reg + led_offset;
		}

		ret = regmap_write(led->priv->regmap, reg_val,
				   mc_dev->subled_info[i].intensity);
		if (ret) {
			dev_err(led->priv->dev,
				"Cannot write intensity value %d\n", ret);
			goto out;
		}
	}
out:
	mutex_unlock(&led->priv->lock);
	return ret;
}

static int lp50xx_set_banks(struct lp50xx *priv, u32 led_banks[])
{
	u8 led_config_lo, led_config_hi;
	u32 bank_enable_mask = 0;
	int ret;
	int i;

	for (i = 0; i < priv->chip_info->max_modules; i++) {
		if (led_banks[i])
			bank_enable_mask |= (1 << led_banks[i]);
	}

	led_config_lo = bank_enable_mask;
	led_config_hi = bank_enable_mask >> 8;

	ret = regmap_write(priv->regmap, LP50XX_LED_CFG0, led_config_lo);
	if (ret)
		return ret;

	if (priv->chip_info->model_id >= LP5030)
		ret = regmap_write(priv->regmap, LP5036_LED_CFG1, led_config_hi);

	return ret;
}

static int lp50xx_reset(struct lp50xx *priv)
{
	return regmap_write(priv->regmap, priv->chip_info->reset_reg, LP50XX_SW_RESET);
}

static int lp50xx_enable_disable(struct lp50xx *priv, int enable_disable)
{
	int ret;

	ret = gpiod_direction_output(priv->enable_gpio, enable_disable);
	if (ret)
		return ret;

	if (enable_disable)
		return regmap_write(priv->regmap, LP50XX_DEV_CFG0, LP50XX_CHIP_EN);
	else
		return regmap_write(priv->regmap, LP50XX_DEV_CFG0, 0);

}

static int lp50xx_probe_leds(struct fwnode_handle *child, struct lp50xx *priv,
			     struct lp50xx_led *led, int num_leds)
{
	u32 led_banks[LP5036_MAX_LED_MODULES] = {0};
	int led_number;
	int ret;

	if (num_leds > 1) {
		if (num_leds > priv->chip_info->max_modules) {
			dev_err(priv->dev, "reg property is invalid\n");
			return -EINVAL;
		}

		priv->num_of_banked_leds = num_leds;

		ret = fwnode_property_read_u32_array(child, "reg", led_banks, num_leds);
		if (ret) {
			dev_err(priv->dev, "reg property is missing\n");
			return ret;
		}

		ret = lp50xx_set_banks(priv, led_banks);
		if (ret) {
			dev_err(priv->dev, "Cannot setup banked LEDs\n");
			return ret;
		}

		led->ctrl_bank_enabled = 1;
	} else {
		ret = fwnode_property_read_u32(child, "reg", &led_number);
		if (ret) {
			dev_err(priv->dev, "led reg property missing\n");
			return ret;
		}

		if (led_number > priv->chip_info->num_leds) {
			dev_err(priv->dev, "led-sources property is invalid\n");
			return -EINVAL;
		}

		led->led_number = led_number;
	}

	return 0;
}

static int lp50xx_probe_dt(struct lp50xx *priv)
{
	struct fwnode_handle *child = NULL;
	struct fwnode_handle *led_node = NULL;
	struct led_init_data init_data = {};
	struct led_classdev *led_cdev;
	struct mc_subled *mc_led_info;
	struct lp50xx_led *led;
	int ret = -EINVAL;
	int num_colors;
	u32 color_id;
	int i = 0;

	priv->enable_gpio = devm_gpiod_get_optional(priv->dev, "enable", GPIOD_OUT_LOW);
	if (IS_ERR(priv->enable_gpio))
		return dev_err_probe(priv->dev, PTR_ERR(priv->enable_gpio),
				     "Failed to get enable GPIO\n");

	priv->regulator = devm_regulator_get(priv->dev, "vled");
	if (IS_ERR(priv->regulator))
		priv->regulator = NULL;

	device_for_each_child_node(priv->dev, child) {
		led = &priv->leds[i];
		ret = fwnode_property_count_u32(child, "reg");
		if (ret < 0) {
			dev_err(priv->dev, "reg property is invalid\n");
			goto child_out;
		}

		ret = lp50xx_probe_leds(child, priv, led, ret);
		if (ret)
			goto child_out;

		init_data.fwnode = child;
		num_colors = 0;

		/*
		 * There are only 3 LEDs per module otherwise they should be
		 * banked which also is presented as 3 LEDs.
		 */
		mc_led_info = devm_kcalloc(priv->dev, LP50XX_LEDS_PER_MODULE,
					   sizeof(*mc_led_info), GFP_KERNEL);
		if (!mc_led_info) {
			ret = -ENOMEM;
			goto child_out;
		}

		fwnode_for_each_child_node(child, led_node) {
			ret = fwnode_property_read_u32(led_node, "color",
						       &color_id);
			if (ret) {
				fwnode_handle_put(led_node);
				dev_err(priv->dev, "Cannot read color\n");
				goto child_out;
			}

			mc_led_info[num_colors].color_index = color_id;
			num_colors++;
		}

		led->priv = priv;
		led->mc_cdev.num_colors = num_colors;
		led->mc_cdev.subled_info = mc_led_info;
		led_cdev = &led->mc_cdev.led_cdev;
		led_cdev->brightness_set_blocking = lp50xx_brightness_set;

		ret = devm_led_classdev_multicolor_register_ext(priv->dev,
						       &led->mc_cdev,
						       &init_data);
		if (ret) {
			dev_err(priv->dev, "led register err: %d\n", ret);
			goto child_out;
		}
		i++;
	}

	return 0;

child_out:
	fwnode_handle_put(child);
	return ret;
}

static int lp50xx_probe(struct i2c_client *client)
{
	struct lp50xx *led;
	int count;
	int ret;

	count = device_get_child_node_count(&client->dev);
	if (!count) {
		dev_err(&client->dev, "LEDs are not defined in device tree!");
		return -ENODEV;
	}

	led = devm_kzalloc(&client->dev, struct_size(led, leds, count),
			   GFP_KERNEL);
	if (!led)
		return -ENOMEM;

	mutex_init(&led->lock);
	led->client = client;
	led->dev = &client->dev;
	led->chip_info = device_get_match_data(&client->dev);
	i2c_set_clientdata(client, led);
	led->regmap = devm_regmap_init_i2c(client,
					led->chip_info->lp50xx_regmap_config);
	if (IS_ERR(led->regmap)) {
		ret = PTR_ERR(led->regmap);
		dev_err(&client->dev, "Failed to allocate register map: %d\n",
			ret);
		return ret;
	}

	ret = lp50xx_reset(led);
	if (ret)
		return ret;

	ret = lp50xx_enable_disable(led, 1);
	if (ret)
		return ret;

	return lp50xx_probe_dt(led);
}

static void lp50xx_remove(struct i2c_client *client)
{
	struct lp50xx *led = i2c_get_clientdata(client);
	int ret;

	ret = lp50xx_enable_disable(led, 0);
	if (ret)
		dev_err(led->dev, "Failed to disable chip\n");

	if (led->regulator) {
		ret = regulator_disable(led->regulator);
		if (ret)
			dev_err(led->dev, "Failed to disable regulator\n");
	}

	mutex_destroy(&led->lock);
}

static const struct i2c_device_id lp50xx_id[] = {
	{ "lp5009", (kernel_ulong_t)&lp50xx_chip_info_tbl[LP5009] },
	{ "lp5012", (kernel_ulong_t)&lp50xx_chip_info_tbl[LP5012] },
	{ "lp5018", (kernel_ulong_t)&lp50xx_chip_info_tbl[LP5018] },
	{ "lp5024", (kernel_ulong_t)&lp50xx_chip_info_tbl[LP5024] },
	{ "lp5030", (kernel_ulong_t)&lp50xx_chip_info_tbl[LP5030] },
	{ "lp5036", (kernel_ulong_t)&lp50xx_chip_info_tbl[LP5036] },
	{ }
};
MODULE_DEVICE_TABLE(i2c, lp50xx_id);

static const struct of_device_id of_lp50xx_leds_match[] = {
	{ .compatible = "ti,lp5009", .data = &lp50xx_chip_info_tbl[LP5009] },
	{ .compatible = "ti,lp5012", .data = &lp50xx_chip_info_tbl[LP5012] },
	{ .compatible = "ti,lp5018", .data = &lp50xx_chip_info_tbl[LP5018] },
	{ .compatible = "ti,lp5024", .data = &lp50xx_chip_info_tbl[LP5024] },
	{ .compatible = "ti,lp5030", .data = &lp50xx_chip_info_tbl[LP5030] },
	{ .compatible = "ti,lp5036", .data = &lp50xx_chip_info_tbl[LP5036] },
	{}
};
MODULE_DEVICE_TABLE(of, of_lp50xx_leds_match);

static struct i2c_driver lp50xx_driver = {
	.driver = {
		.name	= "lp50xx",
		.of_match_table = of_lp50xx_leds_match,
	},
	.probe_new	= lp50xx_probe,
	.remove		= lp50xx_remove,
	.id_table	= lp50xx_id,
};
module_i2c_driver(lp50xx_driver);

MODULE_DESCRIPTION("Texas Instruments LP50XX LED driver");
MODULE_AUTHOR("Dan Murphy <dmurphy@ti.com>");
MODULE_LICENSE("GPL v2");