Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 | // SPDX-License-Identifier: (GPL-2.0 OR MIT) /* * Device tree file for ZII's RMU2 board * * RMU - Remote Modem Unit * * Copyright (C) 2019 Zodiac Inflight Innovations */ /dts-v1/; #include <dt-bindings/thermal/thermal.h> #include "imx7d.dtsi" / { model = "ZII RMU2 Board"; compatible = "zii,imx7d-rmu2", "fsl,imx7d"; chosen { stdout-path = &uart2; }; gpio-leds { compatible = "gpio-leds"; pinctrl-0 = <&pinctrl_leds_debug>; pinctrl-names = "default"; led-debug { label = "zii:green:debug1"; gpios = <&gpio2 8 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; }; }; }; &cpu0 { cpu-supply = <&sw1a_reg>; }; &ecspi1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi1>; cs-gpios = <&gpio4 19 GPIO_ACTIVE_LOW>; status = "okay"; flash@0 { compatible = "jedec,spi-nor"; spi-max-frequency = <20000000>; reg = <0>; #address-cells = <1>; #size-cells = <1>; }; }; &fec1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet1>; assigned-clocks = <&clks IMX7D_ENET1_TIME_ROOT_SRC>, <&clks IMX7D_ENET1_TIME_ROOT_CLK>; assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>; assigned-clock-rates = <0>, <100000000>; phy-mode = "rgmii-id"; phy-handle = <&fec1_phy>; status = "okay"; mdio { #address-cells = <1>; #size-cells = <0>; fec1_phy: ethernet-phy@0 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet1_phy_reset>, <&pinctrl_enet1_phy_interrupt>; reg = <0>; interrupt-parent = <&gpio1>; interrupts = <2 IRQ_TYPE_LEVEL_LOW>; reset-gpios = <&gpio5 11 GPIO_ACTIVE_LOW>; }; }; }; &i2c1 { clock-frequency = <100000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c1>; status = "okay"; pmic@8 { compatible = "fsl,pfuze3000"; reg = <0x08>; regulators { sw1a_reg: sw1a { regulator-min-microvolt = <700000>; regulator-max-microvolt = <3300000>; regulator-boot-on; regulator-always-on; regulator-ramp-delay = <6250>; }; sw1c_reg: sw1b { regulator-min-microvolt = <700000>; regulator-max-microvolt = <1475000>; regulator-boot-on; regulator-always-on; regulator-ramp-delay = <6250>; }; sw2_reg: sw2 { regulator-min-microvolt = <1500000>; regulator-max-microvolt = <1850000>; regulator-boot-on; regulator-always-on; }; sw3a_reg: sw3 { regulator-min-microvolt = <900000>; regulator-max-microvolt = <1650000>; regulator-boot-on; regulator-always-on; }; swbst_reg: swbst { regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5150000>; }; snvs_reg: vsnvs { regulator-min-microvolt = <1000000>; regulator-max-microvolt = <3000000>; regulator-boot-on; regulator-always-on; }; vref_reg: vrefddr { regulator-boot-on; regulator-always-on; }; vgen1_reg: vldo1 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; regulator-always-on; }; vgen2_reg: vldo2 { regulator-min-microvolt = <800000>; regulator-max-microvolt = <1550000>; regulator-always-on; }; vgen3_reg: vccsd { regulator-min-microvolt = <2850000>; regulator-max-microvolt = <3300000>; regulator-always-on; }; vgen4_reg: v33 { regulator-min-microvolt = <2850000>; regulator-max-microvolt = <3300000>; regulator-always-on; }; vgen5_reg: vldo3 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; regulator-always-on; }; vgen6_reg: vldo4 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; regulator-always-on; }; }; }; eeprom@50 { compatible = "atmel,24c04"; reg = <0x50>; }; eeprom@52 { compatible = "atmel,24c04"; reg = <0x52>; }; }; &snvs_rtc { status = "disabled"; }; &uart2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart2>; assigned-clocks = <&clks IMX7D_UART2_ROOT_SRC>; assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>; status = "okay"; }; &uart4 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart4>; assigned-clocks = <&clks IMX7D_UART4_ROOT_SRC>; assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>; status = "okay"; rave-sp { compatible = "zii,rave-sp-rdu2"; current-speed = <1000000>; #address-cells = <1>; #size-cells = <1>; watchdog { compatible = "zii,rave-sp-watchdog"; }; eeprom@a3 { compatible = "zii,rave-sp-eeprom"; reg = <0xa3 0x4000>; #address-cells = <1>; #size-cells = <1>; zii,eeprom-name = "main-eeprom"; }; }; }; &usbotg2 { dr_mode = "host"; disable-over-current; status = "okay"; }; &usdhc1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc1>; bus-width = <4>; no-1-8-v; no-sdio; keep-power-in-suspend; status = "okay"; }; &usdhc3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc3>; bus-width = <8>; no-1-8-v; non-removable; no-sdio; no-sd; keep-power-in-suspend; status = "okay"; }; &wdog1 { status = "disabled"; }; &iomuxc { pinctrl_ecspi1: ecspi1grp { fsl,pins = < MX7D_PAD_ECSPI1_SCLK__ECSPI1_SCLK 0x2 MX7D_PAD_ECSPI1_MOSI__ECSPI1_MOSI 0x2 MX7D_PAD_ECSPI1_MISO__ECSPI1_MISO 0x2 MX7D_PAD_ECSPI1_SS0__GPIO4_IO19 0x59 >; }; pinctrl_enet1: enet1grp { fsl,pins = < MX7D_PAD_SD2_CD_B__ENET1_MDIO 0x3 MX7D_PAD_SD2_WP__ENET1_MDC 0x3 MX7D_PAD_ENET1_RGMII_TXC__ENET1_RGMII_TXC 0x1 MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0 0x1 MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1 0x1 MX7D_PAD_ENET1_RGMII_TD2__ENET1_RGMII_TD2 0x1 MX7D_PAD_ENET1_RGMII_TD3__ENET1_RGMII_TD3 0x1 MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL 0x1 MX7D_PAD_ENET1_RGMII_RXC__ENET1_RGMII_RXC 0x1 MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0 0x1 MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1 0x1 MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2 0x1 MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3 0x1 MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL 0x1 >; }; pinctrl_enet1_phy_reset: enet1phyresetgrp { fsl,pins = < MX7D_PAD_SD2_RESET_B__GPIO5_IO11 0x14 >; }; pinctrl_i2c1: i2c1grp { fsl,pins = < MX7D_PAD_I2C1_SDA__I2C1_SDA 0x4000007f MX7D_PAD_I2C1_SCL__I2C1_SCL 0x4000007f >; }; pinctrl_leds_debug: ledsgrp { fsl,pins = < MX7D_PAD_EPDC_DATA08__GPIO2_IO8 0x59 >; }; pinctrl_uart2: uart2grp { fsl,pins = < MX7D_PAD_UART2_RX_DATA__UART2_DCE_RX 0x79 MX7D_PAD_UART2_TX_DATA__UART2_DCE_TX 0x79 >; }; pinctrl_uart4: uart4grp { fsl,pins = < MX7D_PAD_SD2_DATA0__UART4_DCE_RX 0x79 MX7D_PAD_SD2_DATA1__UART4_DCE_TX 0x79 >; }; pinctrl_usdhc1: usdhc1grp { fsl,pins = < MX7D_PAD_SD1_CMD__SD1_CMD 0x59 MX7D_PAD_SD1_CLK__SD1_CLK 0x19 MX7D_PAD_SD1_DATA0__SD1_DATA0 0x59 MX7D_PAD_SD1_DATA1__SD1_DATA1 0x59 MX7D_PAD_SD1_DATA2__SD1_DATA2 0x59 MX7D_PAD_SD1_DATA3__SD1_DATA3 0x59 >; }; pinctrl_usdhc3: usdhc3grp { fsl,pins = < MX7D_PAD_SD3_CMD__SD3_CMD 0x59 MX7D_PAD_SD3_CLK__SD3_CLK 0x19 MX7D_PAD_SD3_DATA0__SD3_DATA0 0x59 MX7D_PAD_SD3_DATA1__SD3_DATA1 0x59 MX7D_PAD_SD3_DATA2__SD3_DATA2 0x59 MX7D_PAD_SD3_DATA3__SD3_DATA3 0x59 MX7D_PAD_SD3_DATA4__SD3_DATA4 0x59 MX7D_PAD_SD3_DATA5__SD3_DATA5 0x59 MX7D_PAD_SD3_DATA6__SD3_DATA6 0x59 MX7D_PAD_SD3_DATA7__SD3_DATA7 0x59 MX7D_PAD_SD3_RESET_B__SD3_RESET_B 0x59 >; }; }; &iomuxc_lpsr { pinctrl_enet1_phy_interrupt: enet1phyinterruptgrp { fsl,phy = < MX7D_PAD_LPSR_GPIO1_IO02__GPIO1_IO2 0x08 >; }; }; |