/* SPDX-License-Identifier: GPL-2.0 */
#ifndef __DRIVER_USB_TYPEC_UCSI_H
#define __DRIVER_USB_TYPEC_UCSI_H
#include <linux/bitops.h>
#include <linux/device.h>
#include <linux/power_supply.h>
#include <linux/types.h>
#include <linux/usb/typec.h>
#include <linux/usb/pd.h>
#include <linux/usb/role.h>
/* -------------------------------------------------------------------------- */
struct ucsi;
struct ucsi_altmode;
/* UCSI offsets (Bytes) */
#define UCSI_VERSION 0
#define UCSI_CCI 4
#define UCSI_CONTROL 8
#define UCSI_MESSAGE_IN 16
#define UCSI_MESSAGE_OUT 32
/* Command Status and Connector Change Indication (CCI) bits */
#define UCSI_CCI_CONNECTOR(_c_) (((_c_) & GENMASK(7, 1)) >> 1)
#define UCSI_CCI_LENGTH(_c_) (((_c_) & GENMASK(15, 8)) >> 8)
#define UCSI_CCI_NOT_SUPPORTED BIT(25)
#define UCSI_CCI_CANCEL_COMPLETE BIT(26)
#define UCSI_CCI_RESET_COMPLETE BIT(27)
#define UCSI_CCI_BUSY BIT(28)
#define UCSI_CCI_ACK_COMPLETE BIT(29)
#define UCSI_CCI_ERROR BIT(30)
#define UCSI_CCI_COMMAND_COMPLETE BIT(31)
/**
* struct ucsi_operations - UCSI I/O operations
* @read: Read operation
* @sync_write: Blocking write operation
* @async_write: Non-blocking write operation
* @update_altmodes: Squashes duplicate DP altmodes
*
* Read and write routines for UCSI interface. @sync_write must wait for the
* Command Completion Event from the PPM before returning, and @async_write must
* return immediately after sending the data to the PPM.
*/
struct ucsi_operations {
int (*read)(struct ucsi *ucsi, unsigned int offset,
void *val, size_t val_len);
int (*sync_write)(struct ucsi *ucsi, unsigned int offset,
const void *val, size_t val_len);
int (*async_write)(struct ucsi *ucsi, unsigned int offset,
const void *val, size_t val_len);
bool (*update_altmodes)(struct ucsi *ucsi, struct ucsi_altmode *orig,
struct ucsi_altmode *updated);
};
struct ucsi *ucsi_create(struct device *dev, const struct ucsi_operations *ops);
void ucsi_destroy(struct ucsi *ucsi);
int ucsi_register(struct ucsi *ucsi);
void ucsi_unregister(struct ucsi *ucsi);
void *ucsi_get_drvdata(struct ucsi *ucsi);
void ucsi_set_drvdata(struct ucsi *ucsi, void *data);
void ucsi_connector_change(struct ucsi *ucsi, u8 num);
/* -------------------------------------------------------------------------- */
/* Commands */
#define UCSI_PPM_RESET 0x01
#define UCSI_CANCEL 0x02
#define UCSI_CONNECTOR_RESET 0x03
#define UCSI_ACK_CC_CI 0x04
#define UCSI_SET_NOTIFICATION_ENABLE 0x05
#define UCSI_GET_CAPABILITY 0x06
#define UCSI_GET_CONNECTOR_CAPABILITY 0x07
#define UCSI_SET_UOM 0x08
#define UCSI_SET_UOR 0x09
#define UCSI_SET_PDM 0x0a
#define UCSI_SET_PDR 0x0b
#define UCSI_GET_ALTERNATE_MODES 0x0c
#define UCSI_GET_CAM_SUPPORTED 0x0d
#define UCSI_GET_CURRENT_CAM 0x0e
#define UCSI_SET_NEW_CAM 0x0f
#define UCSI_GET_PDOS 0x10
#define UCSI_GET_CABLE_PROPERTY 0x11
#define UCSI_GET_CONNECTOR_STATUS 0x12
#define UCSI_GET_ERROR_STATUS 0x13
#define UCSI_CONNECTOR_NUMBER(_num_) ((u64)(_num_) << 16)
#define UCSI_COMMAND(_cmd_) ((_cmd_) & 0xff)
/* CONNECTOR_RESET command bits */
#define UCSI_CONNECTOR_RESET_HARD BIT(23) /* Deprecated in v1.1 */
/* ACK_CC_CI bits */
#define UCSI_ACK_CONNECTOR_CHANGE BIT(16)
#define UCSI_ACK_COMMAND_COMPLETE BIT(17)
/* SET_NOTIFICATION_ENABLE command bits */
#define UCSI_ENABLE_NTFY_CMD_COMPLETE BIT(16)
#define UCSI_ENABLE_NTFY_EXT_PWR_SRC_CHANGE BIT(17)
#define UCSI_ENABLE_NTFY_PWR_OPMODE_CHANGE BIT(18)
#define UCSI_ENABLE_NTFY_CAP_CHANGE BIT(21)
#define UCSI_ENABLE_NTFY_PWR_LEVEL_CHANGE BIT(22)
#define UCSI_ENABLE_NTFY_PD_RESET_COMPLETE BIT(23)
#define UCSI_ENABLE_NTFY_CAM_CHANGE BIT(24)
#define UCSI_ENABLE_NTFY_BAT_STATUS_CHANGE BIT(25)
#define UCSI_ENABLE_NTFY_PARTNER_CHANGE BIT(27)
#define UCSI_ENABLE_NTFY_PWR_DIR_CHANGE BIT(28)
#define UCSI_ENABLE_NTFY_CONNECTOR_CHANGE BIT(30)
#define UCSI_ENABLE_NTFY_ERROR BIT(31)
#define UCSI_ENABLE_NTFY_ALL 0xdbe70000
/* SET_UOR command bits */
#define UCSI_SET_UOR_ROLE(_r_) (((_r_) == TYPEC_HOST ? 1 : 2) << 23)
#define UCSI_SET_UOR_ACCEPT_ROLE_SWAPS BIT(25)
/* SET_PDF command bits */
#define UCSI_SET_PDR_ROLE(_r_) (((_r_) == TYPEC_SOURCE ? 1 : 2) << 23)
#define UCSI_SET_PDR_ACCEPT_ROLE_SWAPS BIT(25)
/* GET_ALTERNATE_MODES command bits */
#define UCSI_ALTMODE_RECIPIENT(_r_) (((_r_) >> 16) & 0x7)
#define UCSI_GET_ALTMODE_RECIPIENT(_r_) ((u64)(_r_) << 16)
#define UCSI_RECIPIENT_CON 0
#define UCSI_RECIPIENT_SOP 1
#define UCSI_RECIPIENT_SOP_P 2
#define UCSI_RECIPIENT_SOP_PP 3
#define UCSI_GET_ALTMODE_CONNECTOR_NUMBER(_r_) ((u64)(_r_) << 24)
#define UCSI_ALTMODE_OFFSET(_r_) (((_r_) >> 32) & 0xff)
#define UCSI_GET_ALTMODE_OFFSET(_r_) ((u64)(_r_) << 32)
#define UCSI_GET_ALTMODE_NUM_ALTMODES(_r_) ((u64)(_r_) << 40)
/* GET_PDOS command bits */
#define UCSI_GET_PDOS_PARTNER_PDO(_r_) ((u64)(_r_) << 23)
#define UCSI_GET_PDOS_PDO_OFFSET(_r_) ((u64)(_r_) << 24)
#define UCSI_GET_PDOS_NUM_PDOS(_r_) ((u64)(_r_) << 32)
#define UCSI_MAX_PDOS (4)
#define UCSI_GET_PDOS_SRC_PDOS ((u64)1 << 34)
/* -------------------------------------------------------------------------- */
/* Error information returned by PPM in response to GET_ERROR_STATUS command. */
#define UCSI_ERROR_UNREGONIZED_CMD BIT(0)
#define UCSI_ERROR_INVALID_CON_NUM BIT(1)
#define UCSI_ERROR_INVALID_CMD_ARGUMENT BIT(2)
#define UCSI_ERROR_INCOMPATIBLE_PARTNER BIT(3)
#define UCSI_ERROR_CC_COMMUNICATION_ERR BIT(4)
#define UCSI_ERROR_DEAD_BATTERY BIT(5)
#define UCSI_ERROR_CONTRACT_NEGOTIATION_FAIL BIT(6)
#define UCSI_ERROR_OVERCURRENT BIT(7)
#define UCSI_ERROR_UNDEFINED BIT(8)
#define UCSI_ERROR_PARTNER_REJECTED_SWAP BIT(9)
#define UCSI_ERROR_HARD_RESET BIT(10)
#define UCSI_ERROR_PPM_POLICY_CONFLICT BIT(11)
#define UCSI_ERROR_SWAP_REJECTED BIT(12)
#define UCSI_SET_NEW_CAM_ENTER(x) (((x) >> 23) & 0x1)
#define UCSI_SET_NEW_CAM_GET_AM(x) (((x) >> 24) & 0xff)
#define UCSI_SET_NEW_CAM_AM_MASK (0xff << 24)
#define UCSI_SET_NEW_CAM_SET_AM(x) (((x) & 0xff) << 24)
#define UCSI_CMD_CONNECTOR_MASK (0x7)
/* Data structure filled by PPM in response to GET_CAPABILITY command. */
struct ucsi_capability {
u32 attributes;
#define UCSI_CAP_ATTR_DISABLE_STATE BIT(0)
#define UCSI_CAP_ATTR_BATTERY_CHARGING BIT(1)
#define UCSI_CAP_ATTR_USB_PD BIT(2)
#define UCSI_CAP_ATTR_TYPEC_CURRENT BIT(6)
#define UCSI_CAP_ATTR_POWER_AC_SUPPLY BIT(8)
#define UCSI_CAP_ATTR_POWER_OTHER BIT(10)
#define UCSI_CAP_ATTR_POWER_VBUS BIT(14)
u8 num_connectors;
u8 features;
#define UCSI_CAP_SET_UOM BIT(0)
#define UCSI_CAP_SET_PDM BIT(1)
#define UCSI_CAP_ALT_MODE_DETAILS BIT(2)
#define UCSI_CAP_ALT_MODE_OVERRIDE BIT(3)
#define UCSI_CAP_PDO_DETAILS BIT(4)
#define UCSI_CAP_CABLE_DETAILS BIT(5)
#define UCSI_CAP_EXT_SUPPLY_NOTIFICATIONS BIT(6)
#define UCSI_CAP_PD_RESET BIT(7)
u16 reserved_1;
u8 num_alt_modes;
u8 reserved_2;
u16 bc_version;
u16 pd_version;
u16 typec_version;
} __packed;
/* Data structure filled by PPM in response to GET_CONNECTOR_CAPABILITY cmd. */
struct ucsi_connector_capability {
u8 op_mode;
#define UCSI_CONCAP_OPMODE_DFP BIT(0)
#define UCSI_CONCAP_OPMODE_UFP BIT(1)
#define UCSI_CONCAP_OPMODE_DRP BIT(2)
#define UCSI_CONCAP_OPMODE_AUDIO_ACCESSORY BIT(3)
#define UCSI_CONCAP_OPMODE_DEBUG_ACCESSORY BIT(4)
#define UCSI_CONCAP_OPMODE_USB2 BIT(5)
#define UCSI_CONCAP_OPMODE_USB3 BIT(6)
#define UCSI_CONCAP_OPMODE_ALT_MODE BIT(7)
u8 flags;
#define UCSI_CONCAP_FLAG_PROVIDER BIT(0)
#define UCSI_CONCAP_FLAG_CONSUMER BIT(1)
} __packed;
struct ucsi_altmode {
u16 svid;
u32 mid;
} __packed;
/* Data structure filled by PPM in response to GET_CABLE_PROPERTY command. */
struct ucsi_cable_property {
u16 speed_supported;
u8 current_capability;
u8 flags;
#define UCSI_CABLE_PROP_FLAG_VBUS_IN_CABLE BIT(0)
#define UCSI_CABLE_PROP_FLAG_ACTIVE_CABLE BIT(1)
#define UCSI_CABLE_PROP_FLAG_DIRECTIONALITY BIT(2)
#define UCSI_CABLE_PROP_FLAG_PLUG_TYPE(_f_) ((_f_) & GENMASK(3, 0))
#define UCSI_CABLE_PROPERTY_PLUG_TYPE_A 0
#define UCSI_CABLE_PROPERTY_PLUG_TYPE_B 1
#define UCSI_CABLE_PROPERTY_PLUG_TYPE_C 2
#define UCSI_CABLE_PROPERTY_PLUG_OTHER 3
#define UCSI_CABLE_PROP_MODE_SUPPORT BIT(5)
u8 latency;
} __packed;
/* Data structure filled by PPM in response to GET_CONNECTOR_STATUS command. */
struct ucsi_connector_status {
u16 change;
#define UCSI_CONSTAT_EXT_SUPPLY_CHANGE BIT(1)
#define UCSI_CONSTAT_POWER_OPMODE_CHANGE BIT(2)
#define UCSI_CONSTAT_PDOS_CHANGE BIT(5)
#define UCSI_CONSTAT_POWER_LEVEL_CHANGE BIT(6)
#define UCSI_CONSTAT_PD_RESET_COMPLETE BIT(7)
#define UCSI_CONSTAT_CAM_CHANGE BIT(8)
#define UCSI_CONSTAT_BC_CHANGE BIT(9)
#define UCSI_CONSTAT_PARTNER_CHANGE BIT(11)
#define UCSI_CONSTAT_POWER_DIR_CHANGE BIT(12)
#define UCSI_CONSTAT_CONNECT_CHANGE BIT(14)
#define UCSI_CONSTAT_ERROR BIT(15)
u16 flags;
#define UCSI_CONSTAT_PWR_OPMODE(_f_) ((_f_) & GENMASK(2, 0))
#define UCSI_CONSTAT_PWR_OPMODE_NONE 0
#define UCSI_CONSTAT_PWR_OPMODE_DEFAULT 1
#define UCSI_CONSTAT_PWR_OPMODE_BC 2
#define UCSI_CONSTAT_PWR_OPMODE_PD 3
#define UCSI_CONSTAT_PWR_OPMODE_TYPEC1_5 4
#define UCSI_CONSTAT_PWR_OPMODE_TYPEC3_0 5
#define UCSI_CONSTAT_CONNECTED BIT(3)
#define UCSI_CONSTAT_PWR_DIR BIT(4)
#define UCSI_CONSTAT_PARTNER_FLAGS(_f_) (((_f_) & GENMASK(12, 5)) >> 5)
#define UCSI_CONSTAT_PARTNER_FLAG_USB 1
#define UCSI_CONSTAT_PARTNER_FLAG_ALT_MODE 2
#define UCSI_CONSTAT_PARTNER_TYPE(_f_) (((_f_) & GENMASK(15, 13)) >> 13)
#define UCSI_CONSTAT_PARTNER_TYPE_DFP 1
#define UCSI_CONSTAT_PARTNER_TYPE_UFP 2
#define UCSI_CONSTAT_PARTNER_TYPE_CABLE 3 /* Powered Cable */
#define UCSI_CONSTAT_PARTNER_TYPE_CABLE_AND_UFP 4 /* Powered Cable */
#define UCSI_CONSTAT_PARTNER_TYPE_DEBUG 5
#define UCSI_CONSTAT_PARTNER_TYPE_AUDIO 6
u32 request_data_obj;
u8 pwr_status;
#define UCSI_CONSTAT_BC_STATUS(_p_) ((_p_) & GENMASK(2, 0))
#define UCSI_CONSTAT_BC_NOT_CHARGING 0
#define UCSI_CONSTAT_BC_NOMINAL_CHARGING 1
#define UCSI_CONSTAT_BC_SLOW_CHARGING 2
#define UCSI_CONSTAT_BC_TRICKLE_CHARGING 3
#define UCSI_CONSTAT_PROVIDER_CAP_LIMIT(_p_) (((_p_) & GENMASK(6, 3)) >> 3)
#define UCSI_CONSTAT_CAP_PWR_LOWERED 0
#define UCSI_CONSTAT_CAP_PWR_BUDGET_LIMIT 1
} __packed;
/* -------------------------------------------------------------------------- */
struct ucsi {
u16 version;
struct device *dev;
struct driver_data *driver_data;
const struct ucsi_operations *ops;
struct ucsi_capability cap;
struct ucsi_connector *connector;
struct work_struct resume_work;
struct delayed_work work;
int work_count;
#define UCSI_ROLE_SWITCH_RETRY_PER_HZ 10
#define UCSI_ROLE_SWITCH_INTERVAL (HZ / UCSI_ROLE_SWITCH_RETRY_PER_HZ)
#define UCSI_ROLE_SWITCH_WAIT_COUNT (10 * UCSI_ROLE_SWITCH_RETRY_PER_HZ)
/* PPM Communication lock */
struct mutex ppm_lock;
/* The latest "Notification Enable" bits (SET_NOTIFICATION_ENABLE) */
u64 ntfy;
/* PPM communication flags */
unsigned long flags;
#define EVENT_PENDING 0
#define COMMAND_PENDING 1
#define ACK_PENDING 2
};
#define UCSI_MAX_SVID 5
#define UCSI_MAX_ALTMODES (UCSI_MAX_SVID * 6)
#define UCSI_TYPEC_VSAFE5V 5000
#define UCSI_TYPEC_1_5_CURRENT 1500
#define UCSI_TYPEC_3_0_CURRENT 3000
struct ucsi_connector {
int num;
struct ucsi *ucsi;
struct mutex lock; /* port lock */
struct work_struct work;
struct completion complete;
struct workqueue_struct *wq;
struct typec_port *port;
struct typec_partner *partner;
struct typec_altmode *port_altmode[UCSI_MAX_ALTMODES];
struct typec_altmode *partner_altmode[UCSI_MAX_ALTMODES];
struct typec_capability typec_cap;
struct ucsi_connector_status status;
struct ucsi_connector_capability cap;
struct power_supply *psy;
struct power_supply_desc psy_desc;
u32 rdo;
u32 src_pdos[PDO_MAX_OBJECTS];
int num_pdos;
struct usb_role_switch *usb_role_sw;
};
int ucsi_send_command(struct ucsi *ucsi, u64 command,
void *retval, size_t size);
void ucsi_altmode_update_active(struct ucsi_connector *con);
int ucsi_resume(struct ucsi *ucsi);
#if IS_ENABLED(CONFIG_POWER_SUPPLY)
int ucsi_register_port_psy(struct ucsi_connector *con);
void ucsi_unregister_port_psy(struct ucsi_connector *con);
void ucsi_port_psy_changed(struct ucsi_connector *con);
#else
static inline int ucsi_register_port_psy(struct ucsi_connector *con) { return 0; }
static inline void ucsi_unregister_port_psy(struct ucsi_connector *con) { }
static inline void ucsi_port_psy_changed(struct ucsi_connector *con) { }
#endif /* CONFIG_POWER_SUPPLY */
#if IS_ENABLED(CONFIG_TYPEC_DP_ALTMODE)
struct typec_altmode *
ucsi_register_displayport(struct ucsi_connector *con,
bool override, int offset,
struct typec_altmode_desc *desc);
void ucsi_displayport_remove_partner(struct typec_altmode *adev);
#else
static inline struct typec_altmode *
ucsi_register_displayport(struct ucsi_connector *con,
bool override, int offset,
struct typec_altmode_desc *desc)
{
return NULL;
}
static inline void
ucsi_displayport_remove_partner(struct typec_altmode *adev) { }
#endif /* CONFIG_TYPEC_DP_ALTMODE */
/*
* NVIDIA VirtualLink (svid 0x955) has two altmode. VirtualLink
* DP mode with vdo=0x1 and NVIDIA test mode with vdo=0x3
*/
#define USB_TYPEC_NVIDIA_VLINK_DP_VDO 0x1
#define USB_TYPEC_NVIDIA_VLINK_DBG_VDO 0x3
#endif /* __DRIVER_USB_TYPEC_UCSI_H */
