Loading...
// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright 2013 Sascha Hauer, Pengutronix * Copyright 2013-2017 Markus Niebel <Markus.Niebel@tq-group.com> */ #include <dt-bindings/gpio/gpio.h> &fec { /delete-property/ interrupts; interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>, <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>; fsl,err006687-workaround-present; }; &i2c1 { pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_i2c1>; pinctrl-1 = <&pinctrl_i2c1_recovery>; scl-gpios = <&gpio5 27 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; sda-gpios = <&gpio5 26 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; clock-frequency = <100000>; status = "okay"; pmic: pmic@8 { compatible = "fsl,pfuze100"; reg = <0x08>; }; sensor@48 { compatible = "national,lm75"; reg = <0x48>; }; eeprom@50 { compatible = "st,24c64", "atmel,24c64"; reg = <0x50>; pagesize = <32>; }; }; &iomuxc { /* * This pinmuxing is required for the ERR006687 workaround. Board * DTS files that enable the FEC controller with * fsl,err006687-workaround-present must include this group. */ pinctrl_enet_fix: enetfixgrp { fsl,pins = < /* ENET ping patch */ MX6QDL_PAD_GPIO_6__ENET_IRQ 0x000b1 >; }; }; |