Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 | // SPDX-License-Identifier: GPL-2.0-only /* * Real Time Clock driver for Marvell 88PM860x PMIC * * Copyright (c) 2010 Marvell International Ltd. * Author: Haojian Zhuang <haojian.zhuang@marvell.com> */ #include <linux/kernel.h> #include <linux/module.h> #include <linux/of.h> #include <linux/platform_device.h> #include <linux/slab.h> #include <linux/mutex.h> #include <linux/rtc.h> #include <linux/delay.h> #include <linux/mfd/core.h> #include <linux/mfd/88pm860x.h> #define VRTC_CALIBRATION struct pm860x_rtc_info { struct pm860x_chip *chip; struct i2c_client *i2c; struct rtc_device *rtc_dev; struct device *dev; struct delayed_work calib_work; int irq; int vrtc; }; #define REG_VRTC_MEAS1 0x7D #define REG0_ADDR 0xB0 #define REG1_ADDR 0xB2 #define REG2_ADDR 0xB4 #define REG3_ADDR 0xB6 #define REG0_DATA 0xB1 #define REG1_DATA 0xB3 #define REG2_DATA 0xB5 #define REG3_DATA 0xB7 /* bit definitions of Measurement Enable Register 2 (0x51) */ #define MEAS2_VRTC (1 << 0) /* bit definitions of RTC Register 1 (0xA0) */ #define ALARM_EN (1 << 3) #define ALARM_WAKEUP (1 << 4) #define ALARM (1 << 5) #define RTC1_USE_XO (1 << 7) #define VRTC_CALIB_INTERVAL (HZ * 60 * 10) /* 10 minutes */ static irqreturn_t rtc_update_handler(int irq, void *data) { struct pm860x_rtc_info *info = (struct pm860x_rtc_info *)data; int mask; mask = ALARM | ALARM_WAKEUP; pm860x_set_bits(info->i2c, PM8607_RTC1, mask | ALARM_EN, mask); rtc_update_irq(info->rtc_dev, 1, RTC_AF); return IRQ_HANDLED; } static int pm860x_rtc_alarm_irq_enable(struct device *dev, unsigned int enabled) { struct pm860x_rtc_info *info = dev_get_drvdata(dev); if (enabled) pm860x_set_bits(info->i2c, PM8607_RTC1, ALARM_EN, ALARM_EN); else pm860x_set_bits(info->i2c, PM8607_RTC1, ALARM_EN, 0); return 0; } static int pm860x_rtc_read_time(struct device *dev, struct rtc_time *tm) { struct pm860x_rtc_info *info = dev_get_drvdata(dev); unsigned char buf[8]; unsigned long ticks, base, data; pm860x_page_bulk_read(info->i2c, REG0_ADDR, 8, buf); dev_dbg(info->dev, "%x-%x-%x-%x-%x-%x-%x-%x\n", buf[0], buf[1], buf[2], buf[3], buf[4], buf[5], buf[6], buf[7]); base = ((unsigned long)buf[1] << 24) | (buf[3] << 16) | (buf[5] << 8) | buf[7]; /* load 32-bit read-only counter */ pm860x_bulk_read(info->i2c, PM8607_RTC_COUNTER1, 4, buf); data = ((unsigned long)buf[3] << 24) | (buf[2] << 16) | (buf[1] << 8) | buf[0]; ticks = base + data; dev_dbg(info->dev, "get base:0x%lx, RO count:0x%lx, ticks:0x%lx\n", base, data, ticks); rtc_time64_to_tm(ticks, tm); return 0; } static int pm860x_rtc_set_time(struct device *dev, struct rtc_time *tm) { struct pm860x_rtc_info *info = dev_get_drvdata(dev); unsigned char buf[4]; unsigned long ticks, base, data; ticks = rtc_tm_to_time64(tm); /* load 32-bit read-only counter */ pm860x_bulk_read(info->i2c, PM8607_RTC_COUNTER1, 4, buf); data = ((unsigned long)buf[3] << 24) | (buf[2] << 16) | (buf[1] << 8) | buf[0]; base = ticks - data; dev_dbg(info->dev, "set base:0x%lx, RO count:0x%lx, ticks:0x%lx\n", base, data, ticks); pm860x_page_reg_write(info->i2c, REG0_DATA, (base >> 24) & 0xFF); pm860x_page_reg_write(info->i2c, REG1_DATA, (base >> 16) & 0xFF); pm860x_page_reg_write(info->i2c, REG2_DATA, (base >> 8) & 0xFF); pm860x_page_reg_write(info->i2c, REG3_DATA, base & 0xFF); return 0; } static int pm860x_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm) { struct pm860x_rtc_info *info = dev_get_drvdata(dev); unsigned char buf[8]; unsigned long ticks, base, data; int ret; pm860x_page_bulk_read(info->i2c, REG0_ADDR, 8, buf); dev_dbg(info->dev, "%x-%x-%x-%x-%x-%x-%x-%x\n", buf[0], buf[1], buf[2], buf[3], buf[4], buf[5], buf[6], buf[7]); base = ((unsigned long)buf[1] << 24) | (buf[3] << 16) | (buf[5] << 8) | buf[7]; pm860x_bulk_read(info->i2c, PM8607_RTC_EXPIRE1, 4, buf); data = ((unsigned long)buf[3] << 24) | (buf[2] << 16) | (buf[1] << 8) | buf[0]; ticks = base + data; dev_dbg(info->dev, "get base:0x%lx, RO count:0x%lx, ticks:0x%lx\n", base, data, ticks); rtc_time64_to_tm(ticks, &alrm->time); ret = pm860x_reg_read(info->i2c, PM8607_RTC1); alrm->enabled = (ret & ALARM_EN) ? 1 : 0; alrm->pending = (ret & (ALARM | ALARM_WAKEUP)) ? 1 : 0; return 0; } static int pm860x_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm) { struct pm860x_rtc_info *info = dev_get_drvdata(dev); unsigned long ticks, base, data; unsigned char buf[8]; int mask; pm860x_set_bits(info->i2c, PM8607_RTC1, ALARM_EN, 0); pm860x_page_bulk_read(info->i2c, REG0_ADDR, 8, buf); dev_dbg(info->dev, "%x-%x-%x-%x-%x-%x-%x-%x\n", buf[0], buf[1], buf[2], buf[3], buf[4], buf[5], buf[6], buf[7]); base = ((unsigned long)buf[1] << 24) | (buf[3] << 16) | (buf[5] << 8) | buf[7]; ticks = rtc_tm_to_time64(&alrm->time); data = ticks - base; buf[0] = data & 0xff; buf[1] = (data >> 8) & 0xff; buf[2] = (data >> 16) & 0xff; buf[3] = (data >> 24) & 0xff; pm860x_bulk_write(info->i2c, PM8607_RTC_EXPIRE1, 4, buf); if (alrm->enabled) { mask = ALARM | ALARM_WAKEUP | ALARM_EN; pm860x_set_bits(info->i2c, PM8607_RTC1, mask, mask); } else { mask = ALARM | ALARM_WAKEUP | ALARM_EN; pm860x_set_bits(info->i2c, PM8607_RTC1, mask, ALARM | ALARM_WAKEUP); } return 0; } static const struct rtc_class_ops pm860x_rtc_ops = { .read_time = pm860x_rtc_read_time, .set_time = pm860x_rtc_set_time, .read_alarm = pm860x_rtc_read_alarm, .set_alarm = pm860x_rtc_set_alarm, .alarm_irq_enable = pm860x_rtc_alarm_irq_enable, }; #ifdef VRTC_CALIBRATION static void calibrate_vrtc_work(struct work_struct *work) { struct pm860x_rtc_info *info = container_of(work, struct pm860x_rtc_info, calib_work.work); unsigned char buf[2]; unsigned int sum, data, mean, vrtc_set; int i; for (i = 0, sum = 0; i < 16; i++) { msleep(100); pm860x_bulk_read(info->i2c, REG_VRTC_MEAS1, 2, buf); data = (buf[0] << 4) | buf[1]; data = (data * 5400) >> 12; /* convert to mv */ sum += data; } mean = sum >> 4; vrtc_set = 2700 + (info->vrtc & 0x3) * 200; dev_dbg(info->dev, "mean:%d, vrtc_set:%d\n", mean, vrtc_set); sum = pm860x_reg_read(info->i2c, PM8607_RTC_MISC1); data = sum & 0x3; if ((mean + 200) < vrtc_set) { /* try higher voltage */ if (++data == 4) goto out; data = (sum & 0xf8) | (data & 0x3); pm860x_reg_write(info->i2c, PM8607_RTC_MISC1, data); } else if ((mean - 200) > vrtc_set) { /* try lower voltage */ if (data-- == 0) goto out; data = (sum & 0xf8) | (data & 0x3); pm860x_reg_write(info->i2c, PM8607_RTC_MISC1, data); } else goto out; dev_dbg(info->dev, "set 0x%x to RTC_MISC1\n", data); /* trigger next calibration since VRTC is updated */ schedule_delayed_work(&info->calib_work, VRTC_CALIB_INTERVAL); return; out: /* disable measurement */ pm860x_set_bits(info->i2c, PM8607_MEAS_EN2, MEAS2_VRTC, 0); dev_dbg(info->dev, "finish VRTC calibration\n"); return; } #endif #ifdef CONFIG_OF static int pm860x_rtc_dt_init(struct platform_device *pdev, struct pm860x_rtc_info *info) { struct device_node *np = pdev->dev.parent->of_node; int ret; if (!np) return -ENODEV; np = of_get_child_by_name(np, "rtc"); if (!np) { dev_err(&pdev->dev, "failed to find rtc node\n"); return -ENODEV; } ret = of_property_read_u32(np, "marvell,88pm860x-vrtc", &info->vrtc); if (ret) info->vrtc = 0; of_node_put(np); return 0; } #else #define pm860x_rtc_dt_init(x, y) do { } while (0) #endif static int pm860x_rtc_probe(struct platform_device *pdev) { struct pm860x_chip *chip = dev_get_drvdata(pdev->dev.parent); struct pm860x_rtc_info *info; int ret; info = devm_kzalloc(&pdev->dev, sizeof(struct pm860x_rtc_info), GFP_KERNEL); if (!info) return -ENOMEM; info->irq = platform_get_irq(pdev, 0); if (info->irq < 0) return info->irq; info->chip = chip; info->i2c = (chip->id == CHIP_PM8607) ? chip->client : chip->companion; info->dev = &pdev->dev; dev_set_drvdata(&pdev->dev, info); info->rtc_dev = devm_rtc_allocate_device(&pdev->dev); if (IS_ERR(info->rtc_dev)) return PTR_ERR(info->rtc_dev); ret = devm_request_threaded_irq(&pdev->dev, info->irq, NULL, rtc_update_handler, IRQF_ONESHOT, "rtc", info); if (ret < 0) { dev_err(chip->dev, "Failed to request IRQ: #%d: %d\n", info->irq, ret); return ret; } /* set addresses of 32-bit base value for RTC time */ pm860x_page_reg_write(info->i2c, REG0_ADDR, REG0_DATA); pm860x_page_reg_write(info->i2c, REG1_ADDR, REG1_DATA); pm860x_page_reg_write(info->i2c, REG2_ADDR, REG2_DATA); pm860x_page_reg_write(info->i2c, REG3_ADDR, REG3_DATA); pm860x_rtc_dt_init(pdev, info); info->rtc_dev->ops = &pm860x_rtc_ops; info->rtc_dev->range_max = U32_MAX; ret = rtc_register_device(info->rtc_dev); if (ret) return ret; /* * enable internal XO instead of internal 3.25MHz clock since it can * free running in PMIC power-down state. */ pm860x_set_bits(info->i2c, PM8607_RTC1, RTC1_USE_XO, RTC1_USE_XO); #ifdef VRTC_CALIBRATION /* <00> -- 2.7V, <01> -- 2.9V, <10> -- 3.1V, <11> -- 3.3V */ pm860x_set_bits(info->i2c, PM8607_MEAS_EN2, MEAS2_VRTC, MEAS2_VRTC); /* calibrate VRTC */ INIT_DELAYED_WORK(&info->calib_work, calibrate_vrtc_work); schedule_delayed_work(&info->calib_work, VRTC_CALIB_INTERVAL); #endif /* VRTC_CALIBRATION */ device_init_wakeup(&pdev->dev, 1); return 0; } static int pm860x_rtc_remove(struct platform_device *pdev) { struct pm860x_rtc_info *info = platform_get_drvdata(pdev); #ifdef VRTC_CALIBRATION cancel_delayed_work_sync(&info->calib_work); /* disable measurement */ pm860x_set_bits(info->i2c, PM8607_MEAS_EN2, MEAS2_VRTC, 0); #endif /* VRTC_CALIBRATION */ return 0; } #ifdef CONFIG_PM_SLEEP static int pm860x_rtc_suspend(struct device *dev) { struct platform_device *pdev = to_platform_device(dev); struct pm860x_chip *chip = dev_get_drvdata(pdev->dev.parent); if (device_may_wakeup(dev)) chip->wakeup_flag |= 1 << PM8607_IRQ_RTC; return 0; } static int pm860x_rtc_resume(struct device *dev) { struct platform_device *pdev = to_platform_device(dev); struct pm860x_chip *chip = dev_get_drvdata(pdev->dev.parent); if (device_may_wakeup(dev)) chip->wakeup_flag &= ~(1 << PM8607_IRQ_RTC); return 0; } #endif static SIMPLE_DEV_PM_OPS(pm860x_rtc_pm_ops, pm860x_rtc_suspend, pm860x_rtc_resume); static struct platform_driver pm860x_rtc_driver = { .driver = { .name = "88pm860x-rtc", .pm = &pm860x_rtc_pm_ops, }, .probe = pm860x_rtc_probe, .remove = pm860x_rtc_remove, }; module_platform_driver(pm860x_rtc_driver); MODULE_DESCRIPTION("Marvell 88PM860x RTC driver"); MODULE_AUTHOR("Haojian Zhuang <haojian.zhuang@marvell.com>"); MODULE_LICENSE("GPL"); |