// SPDX-License-Identifier: GPL-2.0
// Copyright (c) 2018, Linaro Limited

/dts-v1/;

#include <dt-bindings/gpio/gpio.h>
#include "qcs404-evb.dtsi"

/ {
	model = "Qualcomm Technologies, Inc. QCS404 EVB 4000";
	compatible = "qcom,qcs404-evb-4000", "qcom,qcs404-evb",
		     "qcom,qcs404";
};

&ethernet {
	status = "ok";

	snps,reset-gpio = <&tlmm 60 GPIO_ACTIVE_LOW>;
	snps,reset-active-low;
	snps,reset-delays-us = <0 10000 10000>;

	pinctrl-names = "default";
	pinctrl-0 = <&ethernet_defaults>;

	phy-handle = <&phy1>;
	phy-mode = "rgmii";
	mdio {
		#address-cells = <0x1>;
		#size-cells = <0x0>;
		compatible = "snps,dwmac-mdio";
		phy1: phy@4 {
			compatible = "ethernet-phy-ieee802.3-c22";
			device_type = "ethernet-phy";
			reg = <0x4>;
		};
	};
};

&tlmm {
	ethernet_defaults: ethernet-defaults {
		int {
			pins = "gpio61";
			function = "rgmii_int";
			bias-disable;
			drive-strength = <2>;
		};
		mdc {
			pins = "gpio76";
			function = "rgmii_mdc";
			bias-pull-up;
		};
		mdio {
			pins = "gpio75";
			function = "rgmii_mdio";
			bias-pull-up;
		};
		tx {
			pins = "gpio67", "gpio66", "gpio65", "gpio64";
			function = "rgmii_tx";
			bias-pull-up;
			drive-strength = <16>;
		};
		rx {
			pins = "gpio73", "gpio72", "gpio71", "gpio70";
			function = "rgmii_rx";
			bias-disable;
			drive-strength = <2>;
		};
		tx-ctl {
			pins = "gpio68";
			function = "rgmii_ctl";
			bias-pull-up;
			drive-strength = <16>;
		};
		rx-ctl {
			pins = "gpio74";
			function = "rgmii_ctl";
			bias-disable;
			drive-strength = <2>;
		};
		tx-ck {
			pins = "gpio63";
			function = "rgmii_ck";
			bias-pull-up;
			drive-strength = <16>;
		};
		rx-ck {
			pins = "gpio69";
			function = "rgmii_ck";
			bias-disable;
			drive-strength = <2>;
		};
	};
};