Loading...
Sharp 15" LQ150X1LG11 XGA TFT LCD panel Required properties: - compatible: should be "sharp,lq150x1lg11" - power-supply: regulator to provide the VCC supply voltage (3.3 volts) Optional properties: - backlight: phandle of the backlight device - rlud-gpios: a single GPIO for the RL/UD (rotate 180 degrees) pin. - sellvds-gpios: a single GPIO for the SELLVDS pin. If rlud-gpios and/or sellvds-gpios are not specified, the RL/UD and/or SELLVDS pins are assumed to be handled appropriately by the hardware. Example: backlight: backlight { compatible = "pwm-backlight"; pwms = <&pwm 0 100000>; /* VBR */ brightness-levels = <0 20 40 60 80 100>; default-brightness-level = <2>; power-supply = <&vdd_12v_reg>; /* VDD */ enable-gpios = <&gpio 42 GPIO_ACTIVE_HIGH>; /* XSTABY */ }; panel { compatible = "sharp,lq150x1lg11"; power-supply = <&vcc_3v3_reg>; /* VCC */ backlight = <&backlight>; rlud-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>; /* RL/UD */ sellvds-gpios = <&gpio 18 GPIO_ACTIVE_HIGH>; /* SELLVDS */ }; |