Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 | /* SPDX-License-Identifier: GPL-2.0 */ /* * dz.h: Serial port driver for DECstations equipped * with the DZ chipset. * * Copyright (C) 1998 Olivier A. D. Lebaillif * * Email: olivier.lebaillif@ifrsys.com * * Copyright (C) 2004, 2006 Maciej W. Rozycki */ #ifndef DZ_SERIAL_H #define DZ_SERIAL_H /* * Definitions for the Control and Status Register. */ #define DZ_TRDY 0x8000 /* Transmitter empty */ #define DZ_TIE 0x4000 /* Transmitter Interrupt Enbl */ #define DZ_TLINE 0x0300 /* Transmitter Line Number */ #define DZ_RDONE 0x0080 /* Receiver data ready */ #define DZ_RIE 0x0040 /* Receive Interrupt Enable */ #define DZ_MSE 0x0020 /* Master Scan Enable */ #define DZ_CLR 0x0010 /* Master reset */ #define DZ_MAINT 0x0008 /* Loop Back Mode */ /* * Definitions for the Receiver Buffer Register. */ #define DZ_RBUF_MASK 0x00FF /* Data Mask */ #define DZ_LINE_MASK 0x0300 /* Line Mask */ #define DZ_DVAL 0x8000 /* Valid Data indicator */ #define DZ_OERR 0x4000 /* Overrun error indicator */ #define DZ_FERR 0x2000 /* Frame error indicator */ #define DZ_PERR 0x1000 /* Parity error indicator */ #define DZ_BREAK 0x0800 /* BREAK event software flag */ #define LINE(x) ((x & DZ_LINE_MASK) >> 8) /* Get the line number from the input buffer */ #define UCHAR(x) ((unsigned char)(x & DZ_RBUF_MASK)) /* * Definitions for the Transmit Control Register. */ #define DZ_LINE_KEYBOARD 0x0001 #define DZ_LINE_MOUSE 0x0002 #define DZ_LINE_MODEM 0x0004 #define DZ_LINE_PRINTER 0x0008 #define DZ_MODEM_RTS 0x0800 /* RTS for the modem line (2) */ #define DZ_MODEM_DTR 0x0400 /* DTR for the modem line (2) */ #define DZ_PRINT_RTS 0x0200 /* RTS for the prntr line (3) */ #define DZ_PRINT_DTR 0x0100 /* DTR for the prntr line (3) */ #define DZ_LNENB 0x000f /* Transmitter Line Enable */ /* * Definitions for the Modem Status Register. */ #define DZ_MODEM_RI 0x0800 /* RI for the modem line (2) */ #define DZ_MODEM_CD 0x0400 /* CD for the modem line (2) */ #define DZ_MODEM_DSR 0x0200 /* DSR for the modem line (2) */ #define DZ_MODEM_CTS 0x0100 /* CTS for the modem line (2) */ #define DZ_PRINT_RI 0x0008 /* RI for the printer line (3) */ #define DZ_PRINT_CD 0x0004 /* CD for the printer line (3) */ #define DZ_PRINT_DSR 0x0002 /* DSR for the prntr line (3) */ #define DZ_PRINT_CTS 0x0001 /* CTS for the prntr line (3) */ /* * Definitions for the Transmit Data Register. */ #define DZ_BRK0 0x0100 /* Break assertion for line 0 */ #define DZ_BRK1 0x0200 /* Break assertion for line 1 */ #define DZ_BRK2 0x0400 /* Break assertion for line 2 */ #define DZ_BRK3 0x0800 /* Break assertion for line 3 */ /* * Definitions for the Line Parameter Register. */ #define DZ_KEYBOARD 0x0000 /* line 0 = keyboard */ #define DZ_MOUSE 0x0001 /* line 1 = mouse */ #define DZ_MODEM 0x0002 /* line 2 = modem */ #define DZ_PRINTER 0x0003 /* line 3 = printer */ #define DZ_CSIZE 0x0018 /* Number of bits per byte (mask) */ #define DZ_CS5 0x0000 /* 5 bits per byte */ #define DZ_CS6 0x0008 /* 6 bits per byte */ #define DZ_CS7 0x0010 /* 7 bits per byte */ #define DZ_CS8 0x0018 /* 8 bits per byte */ #define DZ_CSTOPB 0x0020 /* 2 stop bits instead of one */ #define DZ_PARENB 0x0040 /* Parity enable */ #define DZ_PARODD 0x0080 /* Odd parity instead of even */ #define DZ_CBAUD 0x0E00 /* Baud Rate (mask) */ #define DZ_B50 0x0000 #define DZ_B75 0x0100 #define DZ_B110 0x0200 #define DZ_B134 0x0300 #define DZ_B150 0x0400 #define DZ_B300 0x0500 #define DZ_B600 0x0600 #define DZ_B1200 0x0700 #define DZ_B1800 0x0800 #define DZ_B2000 0x0900 #define DZ_B2400 0x0A00 #define DZ_B3600 0x0B00 #define DZ_B4800 0x0C00 #define DZ_B7200 0x0D00 #define DZ_B9600 0x0E00 #define DZ_RXENAB 0x1000 /* Receiver Enable */ /* * Addresses for the DZ registers */ #define DZ_CSR 0x00 /* Control and Status Register */ #define DZ_RBUF 0x08 /* Receive Buffer */ #define DZ_LPR 0x08 /* Line Parameters Register */ #define DZ_TCR 0x10 /* Transmitter Control Register */ #define DZ_MSR 0x18 /* Modem Status Register */ #define DZ_TDR 0x18 /* Transmit Data Register */ #define DZ_NB_PORT 4 #define DZ_XMIT_SIZE 4096 /* buffer size */ #define DZ_WAKEUP_CHARS DZ_XMIT_SIZE/4 #endif /* DZ_SERIAL_H */ |