Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 | // SPDX-License-Identifier: GPL-2.0-or-later /* * DaVinci DM816 AHCI SATA platform driver * * Copyright (C) 2017 BayLibre SAS */ #include <linux/kernel.h> #include <linux/module.h> #include <linux/device.h> #include <linux/pm.h> #include <linux/platform_device.h> #include <linux/libata.h> #include <linux/ahci_platform.h> #include "ahci.h" #define AHCI_DM816_DRV_NAME "ahci-dm816" #define AHCI_DM816_PHY_ENPLL(x) ((x) << 0) #define AHCI_DM816_PHY_MPY(x) ((x) << 1) #define AHCI_DM816_PHY_LOS(x) ((x) << 12) #define AHCI_DM816_PHY_RXCDR(x) ((x) << 13) #define AHCI_DM816_PHY_RXEQ(x) ((x) << 16) #define AHCI_DM816_PHY_TXSWING(x) ((x) << 23) #define AHCI_DM816_P0PHYCR_REG 0x178 #define AHCI_DM816_P1PHYCR_REG 0x1f8 #define AHCI_DM816_PLL_OUT 1500000000LU static const unsigned long pll_mpy_table[] = { 400, 500, 600, 800, 825, 1000, 1200, 1250, 1500, 1600, 1650, 2000, 2200, 2500 }; static int ahci_dm816_get_mpy_bits(unsigned long refclk_rate) { unsigned long pll_multiplier; int i; /* * We need to determine the value of the multiplier (MPY) bits. * In order to include the 8.25 multiplier we need to first divide * the refclk rate by 100. */ pll_multiplier = AHCI_DM816_PLL_OUT / (refclk_rate / 100); for (i = 0; i < ARRAY_SIZE(pll_mpy_table); i++) { if (pll_mpy_table[i] == pll_multiplier) return i; } /* * We should have divided evenly - if not, return an invalid * value. */ return -1; } static int ahci_dm816_phy_init(struct ahci_host_priv *hpriv, struct device *dev) { unsigned long refclk_rate; int mpy; u32 val; /* * We should have been supplied two clocks: the functional and * keep-alive clock and the external reference clock. We need the * rate of the latter to calculate the correct value of MPY bits. */ if (!hpriv->clks[1]) { dev_err(dev, "reference clock not supplied\n"); return -EINVAL; } refclk_rate = clk_get_rate(hpriv->clks[1]); if ((refclk_rate % 100) != 0) { dev_err(dev, "reference clock rate must be divisible by 100\n"); return -EINVAL; } mpy = ahci_dm816_get_mpy_bits(refclk_rate); if (mpy < 0) { dev_err(dev, "can't calculate the MPY bits value\n"); return -EINVAL; } /* Enable the PHY and configure the first HBA port. */ val = AHCI_DM816_PHY_MPY(mpy) | AHCI_DM816_PHY_LOS(1) | AHCI_DM816_PHY_RXCDR(4) | AHCI_DM816_PHY_RXEQ(1) | AHCI_DM816_PHY_TXSWING(3) | AHCI_DM816_PHY_ENPLL(1); writel(val, hpriv->mmio + AHCI_DM816_P0PHYCR_REG); /* Configure the second HBA port. */ val = AHCI_DM816_PHY_LOS(1) | AHCI_DM816_PHY_RXCDR(4) | AHCI_DM816_PHY_RXEQ(1) | AHCI_DM816_PHY_TXSWING(3); writel(val, hpriv->mmio + AHCI_DM816_P1PHYCR_REG); return 0; } static int ahci_dm816_softreset(struct ata_link *link, unsigned int *class, unsigned long deadline) { int pmp, ret; pmp = sata_srst_pmp(link); /* * There's an issue with the SATA controller on DM816 SoC: if we * enable Port Multiplier support, but the drive is connected directly * to the board, it can't be detected. As a workaround: if PMP is * enabled, we first call ahci_do_softreset() and pass it the result of * sata_srst_pmp(). If this call fails, we retry with pmp = 0. */ ret = ahci_do_softreset(link, class, pmp, deadline, ahci_check_ready); if (pmp && ret == -EBUSY) return ahci_do_softreset(link, class, 0, deadline, ahci_check_ready); return ret; } static struct ata_port_operations ahci_dm816_port_ops = { .inherits = &ahci_platform_ops, .softreset = ahci_dm816_softreset, }; static const struct ata_port_info ahci_dm816_port_info = { .flags = AHCI_FLAG_COMMON, .pio_mask = ATA_PIO4, .udma_mask = ATA_UDMA6, .port_ops = &ahci_dm816_port_ops, }; static struct scsi_host_template ahci_dm816_platform_sht = { AHCI_SHT(AHCI_DM816_DRV_NAME), }; static int ahci_dm816_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; struct ahci_host_priv *hpriv; int rc; hpriv = ahci_platform_get_resources(pdev, 0); if (IS_ERR(hpriv)) return PTR_ERR(hpriv); rc = ahci_platform_enable_resources(hpriv); if (rc) return rc; rc = ahci_dm816_phy_init(hpriv, dev); if (rc) goto disable_resources; rc = ahci_platform_init_host(pdev, hpriv, &ahci_dm816_port_info, &ahci_dm816_platform_sht); if (rc) goto disable_resources; return 0; disable_resources: ahci_platform_disable_resources(hpriv); return rc; } static SIMPLE_DEV_PM_OPS(ahci_dm816_pm_ops, ahci_platform_suspend, ahci_platform_resume); static const struct of_device_id ahci_dm816_of_match[] = { { .compatible = "ti,dm816-ahci", }, { /* sentinel */ } }; MODULE_DEVICE_TABLE(of, ahci_dm816_of_match); static struct platform_driver ahci_dm816_driver = { .probe = ahci_dm816_probe, .remove = ata_platform_remove_one, .driver = { .name = AHCI_DM816_DRV_NAME, .of_match_table = ahci_dm816_of_match, .pm = &ahci_dm816_pm_ops, }, }; module_platform_driver(ahci_dm816_driver); MODULE_DESCRIPTION("DaVinci DM816 AHCI SATA platform driver"); MODULE_AUTHOR("Bartosz Golaszewski <bgolaszewski@baylibre.com>"); MODULE_LICENSE("GPL"); |